! Started logfile: J1522-2730_S_2017_06_10_pus_uvs.log on Mon May 6 14:57:04 2019 obs J1522-2730_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1522-2730_S_2017_06_10_pus_uva.fits ! AN table 1: 23 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.550725 visibilities/baseline/integration-bin. ! Found source: J1522-2730 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 2280 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1522-2730_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 163 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.233047Jy sigma=0.001727 ! Fit after self-cal, rms=0.187213Jy sigma=0.001360 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.582 mas, bmaj=8.64 mas, bpa=-7.804 degrees ! Estimated noise=2676.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.788197 Jy ! Component: 100 - total flux cleaned = 0.965099 Jy ! Total flux subtracted in 100 components = 0.965099 Jy ! Clean residual min=-0.035125 max=0.065249 Jy/beam ! Clean residual mean=0.000293 rms=0.012333 Jy/beam ! Combined flux in latest and established models = 0.965099 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.965099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192077Jy sigma=0.001413 ! Fit after self-cal, rms=0.192077Jy sigma=0.001413 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=10.43 mas, bpa=-6.473 degrees ! Estimated noise=2236.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0629765 Jy ! Component: 100 - total flux cleaned = 0.0924861 Jy ! Component: 150 - total flux cleaned = 0.106227 Jy ! Component: 200 - total flux cleaned = 0.107904 Jy ! Total flux subtracted in 200 components = 0.107904 Jy ! Clean residual min=-0.036889 max=0.049352 Jy/beam ! Clean residual mean=-0.000084 rms=0.011642 Jy/beam ! Combined flux in latest and established models = 1.073 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 28 components and 1.073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174159Jy sigma=0.001251 ! Fit after self-cal, rms=0.174145Jy sigma=0.001251 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 1.08 KP 1.02 ! LA 1.00 MK 1.01 NL 1.11 OV 1.01 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.16 KP 0.97 ! LA 0.96 MK 1.01 NL 1.30 OV 1.03 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.11 KP 0.97 ! LA 0.95 MK 1.02 NL 1.04 OV 0.94 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.09 KP 1.00* ! LA 1.00* MK 1.02 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.174145Jy sigma=0.001251 ! Fit after self-cal, rms=0.157263Jy sigma=0.001020 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=10.37 mas, bpa=-6.026 degrees ! Estimated noise=2261.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00993078 Jy ! Component: 100 - total flux cleaned = -0.00946365 Jy ! Component: 150 - total flux cleaned = -0.00986285 Jy ! Component: 200 - total flux cleaned = -0.00986426 Jy ! Total flux subtracted in 200 components = -0.00986426 Jy ! Clean residual min=-0.032098 max=0.031189 Jy/beam ! Clean residual mean=-0.000177 rms=0.008851 Jy/beam ! Combined flux in latest and established models = 1.06314 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 1.06314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154319Jy sigma=0.001003 ! Fit after self-cal, rms=0.154385Jy sigma=0.001003 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154385Jy sigma=0.001003 ! Fit after self-cal, rms=0.100180Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=10.26 mas, bpa=-6.184 degrees ! Estimated noise=2254.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00454319 Jy ! Component: 100 - total flux cleaned = -0.00510267 Jy ! Component: 150 - total flux cleaned = -0.0052615 Jy ! Component: 200 - total flux cleaned = -0.00541559 Jy ! Total flux subtracted in 200 components = -0.00541559 Jy ! Clean residual min=-0.007006 max=0.005926 Jy/beam ! Clean residual mean=0.000023 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 1.05772 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 1.05772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099463Jy sigma=0.000670 ! Fit after self-cal, rms=0.099566Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140075 Jy ! Component: 100 - total flux cleaned = -0.000270389 Jy ! Component: 150 - total flux cleaned = -0.000396771 Jy ! Component: 200 - total flux cleaned = -0.000625978 Jy ! Total flux subtracted in 200 components = -0.000625978 Jy ! Clean residual min=-0.006502 max=0.005962 Jy/beam ! Clean residual mean=0.000026 rms=0.001710 Jy/beam ! Combined flux in latest and established models = 1.0571 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 1.0571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099243Jy sigma=0.000667 ! Fit after self-cal, rms=0.099241Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099241Jy sigma=0.000667 ! Fit after self-cal, rms=0.099052Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=10.26 mas, bpa=-6.208 degrees ! Estimated noise=2251.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00304274 Jy ! Component: 100 - total flux cleaned = -0.00327575 Jy ! Component: 150 - total flux cleaned = -0.00337748 Jy ! Component: 200 - total flux cleaned = -0.0034772 Jy ! Total flux subtracted in 200 components = -0.0034772 Jy ! Clean residual min=-0.006165 max=0.005218 Jy/beam ! Clean residual mean=0.000022 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 1.05362 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 1.05362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098754Jy sigma=0.000664 ! Fit after self-cal, rms=0.098755Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000100558 Jy ! Component: 100 - total flux cleaned = -0.000184536 Jy ! Component: 150 - total flux cleaned = -0.00026515 Jy ! Component: 200 - total flux cleaned = -0.000339349 Jy ! Total flux subtracted in 200 components = -0.000339349 Jy ! Clean residual min=-0.005901 max=0.005105 Jy/beam ! Clean residual mean=0.000023 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 1.05328 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 1.05328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098619Jy sigma=0.000664 ! Fit after self-cal, rms=0.098619Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098619Jy sigma=0.000664 ! Fit after self-cal, rms=0.098510Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.642 mas, bmaj=24 mas, bpa=0.4976 degrees ! Estimated noise=2838.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000340061 Jy ! Component: 100 - total flux cleaned = -0.00033751 Jy ! Component: 150 - total flux cleaned = -0.000371814 Jy ! Component: 200 - total flux cleaned = -0.000403904 Jy ! Total flux subtracted in 200 components = -0.000403904 Jy ! Clean residual min=-0.007402 max=0.006471 Jy/beam ! Clean residual mean=0.000025 rms=0.001996 Jy/beam ! Combined flux in latest and established models = 1.05288 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 59 components and 1.05288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098467Jy sigma=0.000663 ! Fit after self-cal, rms=0.098449Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133414 Jy ! Component: 100 - total flux cleaned = -0.000137184 Jy ! Component: 150 - total flux cleaned = -0.000163232 Jy ! Component: 200 - total flux cleaned = -0.000211253 Jy ! Total flux subtracted in 200 components = -0.000211253 Jy ! Clean residual min=-0.007264 max=0.006471 Jy/beam ! Clean residual mean=0.000027 rms=0.001991 Jy/beam ! Combined flux in latest and established models = 1.05266 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 63 components and 1.05266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098429Jy sigma=0.000662 ! Fit after self-cal, rms=0.098417Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.204 mas, bmaj=10.26 mas, bpa=-6.225 degrees ! Estimated noise=2248.59 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.204 x 10.26 at -6.225 degrees (North through East) ! Clean map min=-0.0055883 max=1.0016 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098417Jy sigma=0.000662 ! Fit after self-cal, rms=0.090306Jy sigma=0.000598 ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=10.26 mas, bpa=-6.247 degrees ! Estimated noise=2247.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00152705 Jy ! Component: 100 - total flux cleaned = -0.00165743 Jy ! Component: 150 - total flux cleaned = -0.0017171 Jy ! Component: 200 - total flux cleaned = -0.0017738 Jy ! Total flux subtracted in 200 components = -0.0017738 Jy ! Clean residual min=-0.005564 max=0.004903 Jy/beam ! Clean residual mean=0.000014 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 1.05089 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 63 components and 1.05089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090208Jy sigma=0.000598 ! Fit after self-cal, rms=0.090208Jy sigma=0.000598 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101896 Jy ! Component: 100 - total flux cleaned = -0.000148741 Jy ! Component: 150 - total flux cleaned = -0.000192304 Jy ! Component: 200 - total flux cleaned = -0.000233574 Jy ! Total flux subtracted in 200 components = -0.000233574 Jy ! Clean residual min=-0.005417 max=0.004935 Jy/beam ! Clean residual mean=0.000015 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 1.05066 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 64 components and 1.05066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090161Jy sigma=0.000597 ! Fit after self-cal, rms=0.090162Jy sigma=0.000597 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090162Jy sigma=0.000597 ! Fit after self-cal, rms=0.090128Jy sigma=0.000597 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.634 mas, bmaj=8.543 mas, bpa=-7.681 degrees ! Estimated noise=2665.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.777536 Jy ! Component: 100 - total flux cleaned = 0.94781 Jy ! Component: 150 - total flux cleaned = 0.999725 Jy ! Component: 200 - total flux cleaned = 1.02404 Jy ! Total flux subtracted in 200 components = 1.02404 Jy ! Clean residual min=-0.007660 max=0.011532 Jy/beam ! Clean residual mean=0.000066 rms=0.002216 Jy/beam ! Combined flux in latest and established models = 1.02404 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.02404 Jy ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=10.26 mas, bpa=-6.257 degrees ! Estimated noise=2246.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157904 Jy ! Component: 100 - total flux cleaned = 0.022997 Jy ! Component: 150 - total flux cleaned = 0.0254144 Jy ! Component: 200 - total flux cleaned = 0.0259211 Jy ! Total flux subtracted in 200 components = 0.0259211 Jy ! Clean residual min=-0.005281 max=0.005778 Jy/beam ! Clean residual mean=0.000012 rms=0.001438 Jy/beam ! Combined flux in latest and established models = 1.04996 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 28 components and 1.04996 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.641 mas, bmaj=24.02 mas, bpa=0.4548 degrees ! Estimated noise=2836.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011814 Jy ! Component: 100 - total flux cleaned = 0.00117786 Jy ! Component: 150 - total flux cleaned = 0.00117736 Jy ! Component: 200 - total flux cleaned = 0.00115324 Jy ! Total flux subtracted in 200 components = 0.00115324 Jy ! Clean residual min=-0.006341 max=0.007003 Jy/beam ! Clean residual mean=0.000014 rms=0.001906 Jy/beam ! Combined flux in latest and established models = 1.05111 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.19743e-05 Jy ! Component: 100 - total flux cleaned = -4.42995e-05 Jy ! Component: 150 - total flux cleaned = -6.48179e-05 Jy ! Component: 200 - total flux cleaned = -8.54082e-05 Jy ! Total flux subtracted in 200 components = -8.54082e-05 Jy ! Clean residual min=-0.006328 max=0.006987 Jy/beam ! Clean residual mean=0.000015 rms=0.001905 Jy/beam ! Combined flux in latest and established models = 1.05103 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 1.05103 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=10.26 mas, bpa=-6.257 degrees ! Estimated noise=2246.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.47945e-05 Jy ! Component: 100 - total flux cleaned = 0.000130798 Jy ! Component: 150 - total flux cleaned = 0.000128966 Jy ! Component: 200 - total flux cleaned = 0.000127163 Jy ! Total flux subtracted in 200 components = 0.000127163 Jy ! Clean residual min=-0.005226 max=0.005458 Jy/beam ! Clean residual mean=0.000006 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 1.05116 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 1.05116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090137Jy sigma=0.000597 ! Fit after self-cal, rms=0.090139Jy sigma=0.000597 wmodel J1522-2730_S_2017_06_10_pus_map.mod ! Writing 45 model components to file: J1522-2730_S_2017_06_10_pus_map.mod wobs J1522-2730_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1522-2730_S_2017_06_10_pus_uvs.fits wwins J1522-2730_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J1522-2730_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000330607 Jy ! Component: 100 - total flux cleaned = -0.00101684 Jy ! Component: 150 - total flux cleaned = -0.00141965 Jy ! Component: 200 - total flux cleaned = -0.00134319 Jy ! Component: 250 - total flux cleaned = -0.00126753 Jy ! Component: 300 - total flux cleaned = -0.000982647 Jy ! Component: 350 - total flux cleaned = -0.000776676 Jy ! Component: 400 - total flux cleaned = -0.00051578 Jy ! Component: 450 - total flux cleaned = -0.000579147 Jy ! Component: 500 - total flux cleaned = -0.000515621 Jy ! Component: 550 - total flux cleaned = -0.000454645 Jy ! Component: 600 - total flux cleaned = -0.000337913 Jy ! Component: 650 - total flux cleaned = -0.000224975 Jy ! Component: 700 - total flux cleaned = -0.00011481 Jy ! Component: 750 - total flux cleaned = 0.000155588 Jy ! Component: 800 - total flux cleaned = 0.000313782 Jy ! Component: 850 - total flux cleaned = 0.000623988 Jy ! Component: 900 - total flux cleaned = 0.0010286 Jy ! Component: 950 - total flux cleaned = 0.00137514 Jy ! Component: 1000 - total flux cleaned = 0.00171604 Jy ! Component: 1050 - total flux cleaned = 0.00209877 Jy ! Component: 1100 - total flux cleaned = 0.00238076 Jy ! Component: 1150 - total flux cleaned = 0.00265785 Jy ! Component: 1200 - total flux cleaned = 0.00306542 Jy ! Component: 1250 - total flux cleaned = 0.00315411 Jy ! Component: 1300 - total flux cleaned = 0.00337401 Jy ! Component: 1350 - total flux cleaned = 0.00350403 Jy ! Component: 1400 - total flux cleaned = 0.00380175 Jy ! Component: 1450 - total flux cleaned = 0.00396883 Jy ! Component: 1500 - total flux cleaned = 0.00421597 Jy ! Component: 1550 - total flux cleaned = 0.00433654 Jy ! Component: 1600 - total flux cleaned = 0.00441677 Jy ! Component: 1650 - total flux cleaned = 0.00461438 Jy ! Component: 1700 - total flux cleaned = 0.00457585 Jy ! Component: 1750 - total flux cleaned = 0.00457609 Jy ! Component: 1800 - total flux cleaned = 0.00461436 Jy ! Component: 1850 - total flux cleaned = 0.0046522 Jy ! Component: 1900 - total flux cleaned = 0.00461538 Jy ! Component: 1950 - total flux cleaned = 0.0046523 Jy ! Component: 2000 - total flux cleaned = 0.00465242 Jy ! Component: 2050 - total flux cleaned = 0.00479537 Jy ! Component: 2100 - total flux cleaned = 0.00472471 Jy ! Component: 2150 - total flux cleaned = 0.00482919 Jy ! Component: 2200 - total flux cleaned = 0.00479501 Jy ! Component: 2250 - total flux cleaned = 0.00489702 Jy ! Component: 2300 - total flux cleaned = 0.00496451 Jy ! Component: 2350 - total flux cleaned = 0.00496421 Jy ! Component: 2400 - total flux cleaned = 0.00493096 Jy ! Component: 2450 - total flux cleaned = 0.00496399 Jy ! Component: 2500 - total flux cleaned = 0.00506128 Jy ! Component: 2550 - total flux cleaned = 0.00512554 Jy ! Component: 2600 - total flux cleaned = 0.00512571 Jy ! Component: 2650 - total flux cleaned = 0.00525206 Jy ! Component: 2700 - total flux cleaned = 0.00525223 Jy ! Component: 2750 - total flux cleaned = 0.00534504 Jy ! Component: 2800 - total flux cleaned = 0.00540622 Jy ! Component: 2850 - total flux cleaned = 0.00543669 Jy ! Component: 2900 - total flux cleaned = 0.00549715 Jy ! Component: 2950 - total flux cleaned = 0.0054973 Jy ! Component: 3000 - total flux cleaned = 0.00558663 Jy ! Component: 3050 - total flux cleaned = 0.00561612 Jy ! Component: 3100 - total flux cleaned = 0.00573328 Jy ! Component: 3150 - total flux cleaned = 0.00579123 Jy ! Component: 3200 - total flux cleaned = 0.00579106 Jy ! Component: 3250 - total flux cleaned = 0.00582 Jy ! Component: 3300 - total flux cleaned = 0.00604822 Jy ! Component: 3350 - total flux cleaned = 0.00610447 Jy ! Component: 3400 - total flux cleaned = 0.00610452 Jy ! Component: 3450 - total flux cleaned = 0.0062167 Jy ! Component: 3500 - total flux cleaned = 0.00624484 Jy ! Component: 3550 - total flux cleaned = 0.00635576 Jy ! Component: 3600 - total flux cleaned = 0.0063836 Jy ! Component: 3650 - total flux cleaned = 0.00649271 Jy ! Component: 3700 - total flux cleaned = 0.00649292 Jy ! Component: 3750 - total flux cleaned = 0.00649302 Jy ! Component: 3800 - total flux cleaned = 0.00657367 Jy ! Component: 3850 - total flux cleaned = 0.00662693 Jy ! Component: 3900 - total flux cleaned = 0.00665345 Jy ! Component: 3950 - total flux cleaned = 0.00667987 Jy ! Component: 4000 - total flux cleaned = 0.00662755 Jy ! Component: 4050 - total flux cleaned = 0.00665382 Jy ! Total flux subtracted in 4096 components = 0.0066277 Jy ! Clean residual min=-0.001824 max=0.001594 Jy/beam ! Clean residual mean=0.000000 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 1.05778 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 329 components and 1.05778 Jy ![Exited script file: muppet] wmap "J1522-2730_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.203 x 10.26 at -6.257 degrees (North through East) ! Clean map min=-0.003419 max=1.0031 Jy/beam ! Writing clean map to FITS file: J1522-2730_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.0031 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000476587 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.142534 0.142534 0.285069 0.570138 1.14028 2.28055 4.5611 9.1222 18.2444 36.4888 72.9776 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.003 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.203 x 10.26 at -6.257 degrees (North through East) ! Clean map min=-0.003419 max=1.0031 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1522-2730_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:57:09 2019