! Started logfile: J1522-2730_S_2017_05_27_pus_uvs.log on Fri May 3 11:09:55 2019 obs J1522-2730_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1522-2730_S_2017_05_27_pus_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.247281 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1522-2730 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 2092 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1522-2730_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 320 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 330 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 320 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 415 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.359342Jy sigma=0.067092 ! Fit after self-cal, rms=0.314869Jy sigma=0.062875 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=15.69 mas, bpa=26.02 degrees ! Estimated noise=875.615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.170601 Jy ! Component: 100 - total flux cleaned = 0.281226 Jy ! Total flux subtracted in 100 components = 0.281226 Jy ! Clean residual min=-0.068204 max=0.120533 Jy/beam ! Clean residual mean=-0.000074 rms=0.027748 Jy/beam ! Combined flux in latest and established models = 0.281226 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.281226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.732504Jy sigma=0.008231 ! Fit after self-cal, rms=0.732383Jy sigma=0.008230 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=15.48 mas, bpa=24.53 degrees ! Estimated noise=996.769 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.164209 Jy ! Component: 100 - total flux cleaned = 0.288208 Jy ! Component: 150 - total flux cleaned = 0.384263 Jy ! Component: 200 - total flux cleaned = 0.458733 Jy ! Total flux subtracted in 200 components = 0.458733 Jy ! Clean residual min=-0.091463 max=0.129177 Jy/beam ! Clean residual mean=0.000028 rms=0.039193 Jy/beam ! Combined flux in latest and established models = 0.739959 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.739959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.495907Jy sigma=0.012831 ! Fit after self-cal, rms=0.494697Jy sigma=0.012830 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.44 FD 0.71 HN 0.68 KP 0.82 ! LA 0.78 MK 1.00* NL 0.63 OV 0.76 ! PT 0.90 SC 0.61 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.74 HN 0.72 KP 0.80 ! LA 0.76 MK 1.00* NL 0.77 OV 0.75 ! PT 0.88 SC 0.67 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 45.64 FD 0.77 HN 0.71 KP 0.82 ! LA 0.77 MK 1.00* NL 0.77 OV 0.69 ! PT 0.86 SC 0.64 ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 0.63 KP 1.00* ! LA 0.65 MK 1.00* NL 1.00* OV 1.00* ! PT 0.90 SC 1.00* ! ! ! Fit before self-cal, rms=0.494697Jy sigma=0.012830 ! Fit after self-cal, rms=0.152190Jy sigma=0.001772 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.903 mas, bmaj=10.85 mas, bpa=14.36 degrees ! Estimated noise=1776.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0160109 Jy ! Component: 100 - total flux cleaned = -0.026479 Jy ! Component: 150 - total flux cleaned = -0.0353829 Jy ! Component: 200 - total flux cleaned = -0.0442894 Jy ! Total flux subtracted in 200 components = -0.0442894 Jy ! Clean residual min=-0.030824 max=0.031676 Jy/beam ! Clean residual mean=0.000076 rms=0.009747 Jy/beam ! Combined flux in latest and established models = 0.69567 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 38 components and 0.69567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123653Jy sigma=0.001353 ! Fit after self-cal, rms=0.120330Jy sigma=0.001332 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120330Jy sigma=0.001332 ! Fit after self-cal, rms=0.116862Jy sigma=0.001093 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.99 mas, bmaj=11.24 mas, bpa=13.09 degrees ! Estimated noise=1755.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0115315 Jy ! Component: 100 - total flux cleaned = -0.0186932 Jy ! Component: 150 - total flux cleaned = -0.0241684 Jy ! Component: 200 - total flux cleaned = -0.0271716 Jy ! Total flux subtracted in 200 components = -0.0271716 Jy ! Clean residual min=-0.022000 max=0.019847 Jy/beam ! Clean residual mean=0.000034 rms=0.005406 Jy/beam ! Combined flux in latest and established models = 0.668498 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 58 components and 0.668498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106825Jy sigma=0.000953 ! Fit after self-cal, rms=0.107096Jy sigma=0.000953 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00270816 Jy ! Component: 100 - total flux cleaned = -0.00508191 Jy ! Component: 150 - total flux cleaned = -0.00716312 Jy ! Component: 200 - total flux cleaned = -0.00828537 Jy ! Total flux subtracted in 200 components = -0.00828537 Jy ! Clean residual min=-0.019441 max=0.018945 Jy/beam ! Clean residual mean=0.000033 rms=0.004994 Jy/beam ! Combined flux in latest and established models = 0.660213 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 0.660213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103571Jy sigma=0.000909 ! Fit after self-cal, rms=0.103550Jy sigma=0.000909 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103550Jy sigma=0.000909 ! Fit after self-cal, rms=0.101437Jy sigma=0.000873 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.997 mas, bmaj=11.29 mas, bpa=12.9 degrees ! Estimated noise=1772.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0095996 Jy ! Component: 100 - total flux cleaned = -0.0139509 Jy ! Component: 150 - total flux cleaned = -0.0172741 Jy ! Component: 200 - total flux cleaned = -0.0190872 Jy ! Total flux subtracted in 200 components = -0.0190872 Jy ! Clean residual min=-0.015542 max=0.014418 Jy/beam ! Clean residual mean=0.000032 rms=0.003937 Jy/beam ! Combined flux in latest and established models = 0.641126 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 75 components and 0.641126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097464Jy sigma=0.000818 ! Fit after self-cal, rms=0.097398Jy sigma=0.000818 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00162727 Jy ! Component: 100 - total flux cleaned = -0.00251126 Jy ! Component: 150 - total flux cleaned = -0.00355421 Jy ! Component: 200 - total flux cleaned = -0.00426029 Jy ! Total flux subtracted in 200 components = -0.00426029 Jy ! Clean residual min=-0.014172 max=0.013984 Jy/beam ! Clean residual mean=0.000031 rms=0.003736 Jy/beam ! Combined flux in latest and established models = 0.636865 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 84 components and 0.636865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095896Jy sigma=0.000800 ! Fit after self-cal, rms=0.095885Jy sigma=0.000800 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095885Jy sigma=0.000800 ! Fit after self-cal, rms=0.095544Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.749 mas, bmaj=18.16 mas, bpa=3.103 degrees ! Estimated noise=2100.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00804488 Jy ! Component: 100 - total flux cleaned = -0.00922203 Jy ! Component: 150 - total flux cleaned = -0.00995161 Jy ! Component: 200 - total flux cleaned = -0.0103581 Jy ! Total flux subtracted in 200 components = -0.0103581 Jy ! Clean residual min=-0.014020 max=0.012614 Jy/beam ! Clean residual mean=0.000049 rms=0.004056 Jy/beam ! Combined flux in latest and established models = 0.626507 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 102 components and 0.626507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094718Jy sigma=0.000772 ! Fit after self-cal, rms=0.094655Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000359505 Jy ! Component: 100 - total flux cleaned = 5.66647e-05 Jy ! Component: 150 - total flux cleaned = -0.000215904 Jy ! Component: 200 - total flux cleaned = -0.000337597 Jy ! Total flux subtracted in 200 components = -0.000337597 Jy ! Clean residual min=-0.013037 max=0.013088 Jy/beam ! Clean residual mean=0.000046 rms=0.003988 Jy/beam ! Combined flux in latest and established models = 0.62617 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 122 components and 0.62617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094235Jy sigma=0.000768 ! Fit after self-cal, rms=0.094215Jy sigma=0.000767 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.001 mas, bmaj=11.34 mas, bpa=12.8 degrees ! Estimated noise=1781.17 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.001 x 11.34 at 12.8 degrees (North through East) ! Clean map min=-0.010499 max=0.418 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=9.597 mas, bpa=14.04 degrees ! Estimated noise=2184.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.378034 Jy ! Component: 100 - total flux cleaned = 0.468837 Jy ! Component: 150 - total flux cleaned = 0.508749 Jy ! Component: 200 - total flux cleaned = 0.533261 Jy ! Total flux subtracted in 200 components = 0.533261 Jy ! Clean residual min=-0.012759 max=0.018013 Jy/beam ! Clean residual mean=0.000009 rms=0.004480 Jy/beam ! Combined flux in latest and established models = 0.533261 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.533261 Jy ! Inverting map and beam ! Estimated beam: bmin=4.001 mas, bmaj=11.34 mas, bpa=12.8 degrees ! Estimated noise=1781.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0283183 Jy ! Component: 100 - total flux cleaned = 0.0456722 Jy ! Component: 150 - total flux cleaned = 0.0576539 Jy ! Component: 200 - total flux cleaned = 0.0661185 Jy ! Total flux subtracted in 200 components = 0.0661185 Jy ! Clean residual min=-0.009647 max=0.014414 Jy/beam ! Clean residual mean=0.000027 rms=0.003299 Jy/beam ! Combined flux in latest and established models = 0.599379 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 54 components and 0.599379 Jy ! Inverting map ! Added new window around map position (76.5, 119.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137974 Jy ! Component: 100 - total flux cleaned = 0.0210874 Jy ! Component: 150 - total flux cleaned = 0.0257314 Jy ! Component: 200 - total flux cleaned = 0.0271707 Jy ! Total flux subtracted in 200 components = 0.0271707 Jy ! Clean residual min=-0.008030 max=0.009400 Jy/beam ! Clean residual mean=0.000033 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 0.62655 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 94 components and 0.62655 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.749 mas, bmaj=18.16 mas, bpa=3.103 degrees ! Estimated noise=2100.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238386 Jy ! Component: 100 - total flux cleaned = 0.00301273 Jy ! Component: 150 - total flux cleaned = 0.00327199 Jy ! Component: 200 - total flux cleaned = 0.00350269 Jy ! Total flux subtracted in 200 components = 0.00350269 Jy ! Clean residual min=-0.010684 max=0.014664 Jy/beam ! Clean residual mean=0.000050 rms=0.003612 Jy/beam ! Combined flux in latest and established models = 0.630052 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000297598 Jy ! Component: 100 - total flux cleaned = 0.000390326 Jy ! Component: 150 - total flux cleaned = 0.000547509 Jy ! Component: 200 - total flux cleaned = 0.000622497 Jy ! Total flux subtracted in 200 components = 0.000622497 Jy ! Clean residual min=-0.010610 max=0.014177 Jy/beam ! Clean residual mean=0.000055 rms=0.003559 Jy/beam ! Combined flux in latest and established models = 0.630675 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 113 components and 0.630675 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.001 mas, bmaj=11.34 mas, bpa=12.8 degrees ! Estimated noise=1781.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000773983 Jy ! Component: 100 - total flux cleaned = 0.00119121 Jy ! Component: 150 - total flux cleaned = 0.00111065 Jy ! Component: 200 - total flux cleaned = 0.00103255 Jy ! Total flux subtracted in 200 components = 0.00103255 Jy ! Clean residual min=-0.008223 max=0.009669 Jy/beam ! Clean residual mean=0.000032 rms=0.002416 Jy/beam ! Combined flux in latest and established models = 0.631708 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 136 components and 0.631708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088295Jy sigma=0.000713 ! Fit after self-cal, rms=0.087718Jy sigma=0.000707 wmodel J1522-2730_S_2017_05_27_pus_map.mod ! Writing 136 model components to file: J1522-2730_S_2017_05_27_pus_map.mod wobs J1522-2730_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1522-2730_S_2017_05_27_pus_uvs.fits wwins J1522-2730_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1522-2730_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000471826 Jy ! Component: 100 - total flux cleaned = -8.20652e-05 Jy ! Component: 150 - total flux cleaned = 0.000783807 Jy ! Component: 200 - total flux cleaned = 0.00183516 Jy ! Component: 250 - total flux cleaned = 0.0027282 Jy ! Component: 300 - total flux cleaned = 0.0036948 Jy ! Component: 350 - total flux cleaned = 0.00431788 Jy ! Component: 400 - total flux cleaned = 0.00532111 Jy ! Component: 450 - total flux cleaned = 0.00600036 Jy ! Component: 500 - total flux cleaned = 0.00675242 Jy ! Component: 550 - total flux cleaned = 0.00729622 Jy ! Component: 600 - total flux cleaned = 0.00756136 Jy ! Component: 650 - total flux cleaned = 0.00799172 Jy ! Component: 700 - total flux cleaned = 0.00840882 Jy ! Component: 750 - total flux cleaned = 0.00857148 Jy ! Component: 800 - total flux cleaned = 0.00872935 Jy ! Component: 850 - total flux cleaned = 0.00857456 Jy ! Component: 900 - total flux cleaned = 0.00857428 Jy ! Component: 950 - total flux cleaned = 0.00835315 Jy ! Component: 1000 - total flux cleaned = 0.00842689 Jy ! Component: 1050 - total flux cleaned = 0.00835717 Jy ! Component: 1100 - total flux cleaned = 0.00849588 Jy ! Component: 1150 - total flux cleaned = 0.00835933 Jy ! Component: 1200 - total flux cleaned = 0.00802684 Jy ! Component: 1250 - total flux cleaned = 0.00789831 Jy ! Component: 1300 - total flux cleaned = 0.00783361 Jy ! Component: 1350 - total flux cleaned = 0.00770625 Jy ! Component: 1400 - total flux cleaned = 0.00764499 Jy ! Component: 1450 - total flux cleaned = 0.00758547 Jy ! Component: 1500 - total flux cleaned = 0.00770505 Jy ! Component: 1550 - total flux cleaned = 0.00770529 Jy ! Component: 1600 - total flux cleaned = 0.00759077 Jy ! Component: 1650 - total flux cleaned = 0.0075913 Jy ! Component: 1700 - total flux cleaned = 0.00736829 Jy ! Component: 1750 - total flux cleaned = 0.00742373 Jy ! Component: 1800 - total flux cleaned = 0.00726216 Jy ! Component: 1850 - total flux cleaned = 0.00736813 Jy ! Component: 1900 - total flux cleaned = 0.00715629 Jy ! Component: 1950 - total flux cleaned = 0.00710312 Jy ! Component: 2000 - total flux cleaned = 0.0070519 Jy ! Component: 2050 - total flux cleaned = 0.00715327 Jy ! Component: 2100 - total flux cleaned = 0.00720424 Jy ! Component: 2150 - total flux cleaned = 0.00735212 Jy ! Component: 2200 - total flux cleaned = 0.00744921 Jy ! Component: 2250 - total flux cleaned = 0.00754528 Jy ! Component: 2300 - total flux cleaned = 0.0075934 Jy ! Component: 2350 - total flux cleaned = 0.00787645 Jy ! Component: 2400 - total flux cleaned = 0.00806304 Jy ! Component: 2450 - total flux cleaned = 0.00829346 Jy ! Component: 2500 - total flux cleaned = 0.00847545 Jy ! Component: 2550 - total flux cleaned = 0.0085665 Jy ! Component: 2600 - total flux cleaned = 0.00883566 Jy ! Component: 2650 - total flux cleaned = 0.00896901 Jy ! Component: 2700 - total flux cleaned = 0.00914555 Jy ! Component: 2750 - total flux cleaned = 0.00923362 Jy ! Component: 2800 - total flux cleaned = 0.00940849 Jy ! Component: 2850 - total flux cleaned = 0.00953896 Jy ! Component: 2900 - total flux cleaned = 0.00979743 Jy ! Component: 2950 - total flux cleaned = 0.0100117 Jy ! Component: 3000 - total flux cleaned = 0.0102248 Jy ! Component: 3050 - total flux cleaned = 0.0103098 Jy ! Component: 3100 - total flux cleaned = 0.0105208 Jy ! Component: 3150 - total flux cleaned = 0.0106469 Jy ! Component: 3200 - total flux cleaned = 0.0108142 Jy ! Component: 3250 - total flux cleaned = 0.0110223 Jy ! Component: 3300 - total flux cleaned = 0.0111054 Jy ! Component: 3350 - total flux cleaned = 0.0113121 Jy ! Component: 3400 - total flux cleaned = 0.0114358 Jy ! Component: 3450 - total flux cleaned = 0.0116827 Jy ! Component: 3500 - total flux cleaned = 0.0118057 Jy ! Component: 3550 - total flux cleaned = 0.0119697 Jy ! Component: 3600 - total flux cleaned = 0.0121738 Jy ! Component: 3650 - total flux cleaned = 0.0123779 Jy ! Component: 3700 - total flux cleaned = 0.0125818 Jy ! Component: 3750 - total flux cleaned = 0.0127857 Jy ! Component: 3800 - total flux cleaned = 0.0129896 Jy ! Component: 3850 - total flux cleaned = 0.0131531 Jy ! Component: 3900 - total flux cleaned = 0.0133572 Jy ! Component: 3950 - total flux cleaned = 0.0134797 Jy ! Component: 4000 - total flux cleaned = 0.0136023 Jy ! Component: 4050 - total flux cleaned = 0.0137252 Jy ! Total flux subtracted in 4096 components = 0.0138069 Jy ! Clean residual min=-0.002534 max=0.002448 Jy/beam ! Clean residual mean=-0.000021 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.645514 Jy keep ! Adding 369 model components to the UV plane model. ! The established model now contains 505 components and 0.645514 Jy ![Exited script file: muppet] wmap "J1522-2730_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.001 x 11.34 at 12.8 degrees (North through East) ! Clean map min=-0.0059468 max=0.45331 Jy/beam ! Writing clean map to FITS file: J1522-2730_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.453308 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00073655 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.48745 0.48745 0.9749 1.9498 3.8996 7.7992 15.5984 31.1968 62.3936 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.453 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.001 x 11.34 at 12.8 degrees (North through East) ! Clean map min=-0.0059468 max=0.45331 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1522-2730_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:10:00 2019