! Started logfile: J1521+4336_S_2017_05_01_pus_uvs.log on Wed May 1 18:39:11 2019 obs J1521+4336_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1521+4336_S_2017_05_01_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.746032 visibilities/baseline/integration-bin. ! Found source: J1521+4336 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 1880 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1521+4336_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.685332Jy sigma=0.006662 ! Fit after self-cal, rms=0.678422Jy sigma=0.006605 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.791 mas, bmaj=9.722 mas, bpa=-70.43 degrees ! Estimated noise=2836.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.243836 Jy ! Component: 100 - total flux cleaned = 0.304628 Jy ! Total flux subtracted in 100 components = 0.304628 Jy ! Clean residual min=-0.028833 max=0.051335 Jy/beam ! Clean residual mean=-0.000016 rms=0.009622 Jy/beam ! Combined flux in latest and established models = 0.304628 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.304628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142197Jy sigma=0.001188 ! Fit after self-cal, rms=0.142170Jy sigma=0.001188 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.341 mas, bmaj=10.49 mas, bpa=-74.07 degrees ! Estimated noise=2192.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281655 Jy ! Component: 100 - total flux cleaned = 0.0433121 Jy ! Component: 150 - total flux cleaned = 0.0487873 Jy ! Component: 200 - total flux cleaned = 0.0491028 Jy ! Total flux subtracted in 200 components = 0.0491028 Jy ! Clean residual min=-0.031354 max=0.046024 Jy/beam ! Clean residual mean=0.000089 rms=0.009542 Jy/beam ! Combined flux in latest and established models = 0.353731 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 0.353731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132105Jy sigma=0.001201 ! Fit after self-cal, rms=0.132045Jy sigma=0.001200 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.74 HN 1.01 KP 1.03 ! LA 0.95 MK 1.00* NL 0.92 OV 1.12 ! PT 0.97 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.73 HN 1.02 KP 0.97 ! LA 0.93 MK 1.00* NL 0.95 OV 2.25 ! PT 0.98 SC 1.35 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.79 HN 1.04 KP 0.98 ! LA 0.97 MK 1.00* NL 0.96 OV 1.06 ! PT 0.94 SC 1.09 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.85 HN 0.92 KP 1.00* ! LA 0.69 MK 1.00* NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.132045Jy sigma=0.001200 ! Fit after self-cal, rms=0.099700Jy sigma=0.000711 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.496 mas, bmaj=10.32 mas, bpa=-77.89 degrees ! Estimated noise=2199.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00185916 Jy ! Component: 100 - total flux cleaned = -0.00279162 Jy ! Component: 150 - total flux cleaned = -0.00324484 Jy ! Component: 200 - total flux cleaned = -0.00306135 Jy ! Total flux subtracted in 200 components = -0.00306135 Jy ! Clean residual min=-0.010399 max=0.007325 Jy/beam ! Clean residual mean=0.000059 rms=0.002096 Jy/beam ! Combined flux in latest and established models = 0.35067 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 53 components and 0.35067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098239Jy sigma=0.000696 ! Fit after self-cal, rms=0.097704Jy sigma=0.000694 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097704Jy sigma=0.000694 ! Fit after self-cal, rms=0.098837Jy sigma=0.000692 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.514 mas, bmaj=10.33 mas, bpa=-78.47 degrees ! Estimated noise=2186.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00283679 Jy ! Component: 100 - total flux cleaned = -0.00302136 Jy ! Component: 150 - total flux cleaned = -0.0031481 Jy ! Component: 200 - total flux cleaned = -0.00283846 Jy ! Total flux subtracted in 200 components = -0.00283846 Jy ! Clean residual min=-0.007470 max=0.005797 Jy/beam ! Clean residual mean=0.000060 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.347831 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 72 components and 0.347831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098382Jy sigma=0.000688 ! Fit after self-cal, rms=0.098387Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164045 Jy ! Component: 100 - total flux cleaned = 0.00047271 Jy ! Component: 150 - total flux cleaned = 0.000676137 Jy ! Component: 200 - total flux cleaned = 0.000920128 Jy ! Total flux subtracted in 200 components = 0.000920128 Jy ! Clean residual min=-0.006598 max=0.005799 Jy/beam ! Clean residual mean=0.000058 rms=0.001605 Jy/beam ! Combined flux in latest and established models = 0.348751 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 81 components and 0.348751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098307Jy sigma=0.000687 ! Fit after self-cal, rms=0.098305Jy sigma=0.000687 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098305Jy sigma=0.000687 ! Fit after self-cal, rms=0.099692Jy sigma=0.000686 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.528 mas, bmaj=10.35 mas, bpa=-78.88 degrees ! Estimated noise=2181.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0028858 Jy ! Component: 100 - total flux cleaned = -0.00289126 Jy ! Component: 150 - total flux cleaned = -0.0027722 Jy ! Component: 200 - total flux cleaned = -0.00261577 Jy ! Total flux subtracted in 200 components = -0.00261577 Jy ! Clean residual min=-0.005552 max=0.005120 Jy/beam ! Clean residual mean=0.000060 rms=0.001465 Jy/beam ! Combined flux in latest and established models = 0.346136 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 87 components and 0.346136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099577Jy sigma=0.000685 ! Fit after self-cal, rms=0.099585Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141995 Jy ! Component: 100 - total flux cleaned = 0.00027309 Jy ! Component: 150 - total flux cleaned = 0.000471134 Jy ! Component: 200 - total flux cleaned = 0.000507099 Jy ! Total flux subtracted in 200 components = 0.000507099 Jy ! Clean residual min=-0.005240 max=0.005108 Jy/beam ! Clean residual mean=0.000060 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.346643 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 93 components and 0.346643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099553Jy sigma=0.000684 ! Fit after self-cal, rms=0.099552Jy sigma=0.000684 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099552Jy sigma=0.000684 ! Fit after self-cal, rms=0.100261Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.544 mas, bmaj=11.24 mas, bpa=-81.21 degrees ! Estimated noise=2239.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112963 Jy ! Component: 100 - total flux cleaned = -0.00116046 Jy ! Component: 150 - total flux cleaned = -0.00116141 Jy ! Component: 200 - total flux cleaned = -0.00118573 Jy ! Total flux subtracted in 200 components = -0.00118573 Jy ! Clean residual min=-0.004825 max=0.005538 Jy/beam ! Clean residual mean=0.000089 rms=0.001502 Jy/beam ! Combined flux in latest and established models = 0.345457 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 101 components and 0.345457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100231Jy sigma=0.000684 ! Fit after self-cal, rms=0.100236Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.14335e-05 Jy ! Component: 100 - total flux cleaned = 3.1169e-05 Jy ! Component: 150 - total flux cleaned = 1.25462e-05 Jy ! Component: 200 - total flux cleaned = 1.27875e-05 Jy ! Total flux subtracted in 200 components = 1.27875e-05 Jy ! Clean residual min=-0.004837 max=0.005559 Jy/beam ! Clean residual mean=0.000089 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 0.34547 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 105 components and 0.34547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100221Jy sigma=0.000684 ! Fit after self-cal, rms=0.100220Jy sigma=0.000684 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.538 mas, bmaj=10.36 mas, bpa=-79.07 degrees ! Estimated noise=2178.75 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.538 x 10.36 at -79.07 degrees (North through East) ! Clean map min=-0.0047584 max=0.31312 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.025 mas, bmaj=9.475 mas, bpa=-75 degrees ! Estimated noise=2819.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.242194 Jy ! Component: 100 - total flux cleaned = 0.295501 Jy ! Component: 150 - total flux cleaned = 0.31243 Jy ! Component: 200 - total flux cleaned = 0.322224 Jy ! Total flux subtracted in 200 components = 0.322224 Jy ! Clean residual min=-0.008132 max=0.008886 Jy/beam ! Clean residual mean=0.000038 rms=0.002248 Jy/beam ! Combined flux in latest and established models = 0.322224 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.322224 Jy ! Inverting map and beam ! Estimated beam: bmin=6.538 mas, bmaj=10.36 mas, bpa=-79.07 degrees ! Estimated noise=2178.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00887399 Jy ! Component: 100 - total flux cleaned = 0.0143631 Jy ! Component: 150 - total flux cleaned = 0.0165386 Jy ! Component: 200 - total flux cleaned = 0.0178536 Jy ! Total flux subtracted in 200 components = 0.0178536 Jy ! Clean residual min=-0.005513 max=0.005235 Jy/beam ! Clean residual mean=0.000068 rms=0.001500 Jy/beam ! Combined flux in latest and established models = 0.340078 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 49 components and 0.340078 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.544 mas, bmaj=11.24 mas, bpa=-81.21 degrees ! Estimated noise=2239.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278814 Jy ! Component: 100 - total flux cleaned = 0.00356653 Jy ! Component: 150 - total flux cleaned = 0.00373608 Jy ! Component: 200 - total flux cleaned = 0.00383228 Jy ! Total flux subtracted in 200 components = 0.00383228 Jy ! Clean residual min=-0.005349 max=0.005430 Jy/beam ! Clean residual mean=0.000094 rms=0.001545 Jy/beam ! Combined flux in latest and established models = 0.34391 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.57287e-05 Jy ! Component: 100 - total flux cleaned = 0.000199259 Jy ! Component: 150 - total flux cleaned = 0.000266622 Jy ! Component: 200 - total flux cleaned = 0.000357548 Jy ! Total flux subtracted in 200 components = 0.000357548 Jy ! Clean residual min=-0.005205 max=0.005532 Jy/beam ! Clean residual mean=0.000093 rms=0.001521 Jy/beam ! Combined flux in latest and established models = 0.344267 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 73 components and 0.344267 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.538 mas, bmaj=10.36 mas, bpa=-79.07 degrees ! Estimated noise=2178.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000487679 Jy ! Component: 100 - total flux cleaned = -0.000522569 Jy ! Component: 150 - total flux cleaned = -0.000521664 Jy ! Component: 200 - total flux cleaned = -0.000552063 Jy ! Total flux subtracted in 200 components = -0.000552063 Jy ! Clean residual min=-0.004906 max=0.005243 Jy/beam ! Clean residual mean=0.000061 rms=0.001380 Jy/beam ! Combined flux in latest and established models = 0.343715 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 83 components and 0.343715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100068Jy sigma=0.000684 ! Fit after self-cal, rms=0.100063Jy sigma=0.000684 wmodel J1521+4336_S_2017_05_01_pus_map.mod ! Writing 83 model components to file: J1521+4336_S_2017_05_01_pus_map.mod wobs J1521+4336_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1521+4336_S_2017_05_01_pus_uvs.fits wwins J1521+4336_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J1521+4336_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118964 Jy ! Component: 100 - total flux cleaned = 0.000957185 Jy ! Component: 150 - total flux cleaned = 0.000372317 Jy ! Component: 200 - total flux cleaned = -0.000368364 Jy ! Component: 250 - total flux cleaned = -0.000935108 Jy ! Component: 300 - total flux cleaned = -0.000876442 Jy ! Component: 350 - total flux cleaned = -0.000706335 Jy ! Component: 400 - total flux cleaned = -0.000438875 Jy ! Component: 450 - total flux cleaned = -0.000286743 Jy ! Component: 500 - total flux cleaned = -4.08371e-05 Jy ! Component: 550 - total flux cleaned = 0.000148315 Jy ! Component: 600 - total flux cleaned = 0.000283682 Jy ! Component: 650 - total flux cleaned = 0.000414174 Jy ! Component: 700 - total flux cleaned = 0.000454556 Jy ! Component: 750 - total flux cleaned = 0.000575219 Jy ! Component: 800 - total flux cleaned = 0.000852031 Jy ! Component: 850 - total flux cleaned = 0.00115924 Jy ! Component: 900 - total flux cleaned = 0.00145774 Jy ! Component: 950 - total flux cleaned = 0.00156687 Jy ! Component: 1000 - total flux cleaned = 0.00167391 Jy ! Component: 1050 - total flux cleaned = 0.00191726 Jy ! Component: 1100 - total flux cleaned = 0.00211948 Jy ! Component: 1150 - total flux cleaned = 0.00208561 Jy ! Component: 1200 - total flux cleaned = 0.00215033 Jy ! Component: 1250 - total flux cleaned = 0.00224602 Jy ! Component: 1300 - total flux cleaned = 0.00227682 Jy ! Component: 1350 - total flux cleaned = 0.00227651 Jy ! Component: 1400 - total flux cleaned = 0.00227669 Jy ! Component: 1450 - total flux cleaned = 0.00239641 Jy ! Component: 1500 - total flux cleaned = 0.00245557 Jy ! Component: 1550 - total flux cleaned = 0.00251331 Jy ! Component: 1600 - total flux cleaned = 0.00254208 Jy ! Component: 1650 - total flux cleaned = 0.00254193 Jy ! Component: 1700 - total flux cleaned = 0.00256918 Jy ! Component: 1750 - total flux cleaned = 0.00256909 Jy ! Component: 1800 - total flux cleaned = 0.00259626 Jy ! Component: 1850 - total flux cleaned = 0.00259647 Jy ! Component: 1900 - total flux cleaned = 0.00264948 Jy ! Component: 1950 - total flux cleaned = 0.00264935 Jy ! Component: 2000 - total flux cleaned = 0.00264954 Jy ! Component: 2050 - total flux cleaned = 0.00275267 Jy ! Component: 2100 - total flux cleaned = 0.00277811 Jy ! Component: 2150 - total flux cleaned = 0.00280345 Jy ! Component: 2200 - total flux cleaned = 0.00285394 Jy ! Component: 2250 - total flux cleaned = 0.00285411 Jy ! Component: 2300 - total flux cleaned = 0.00287916 Jy ! Component: 2350 - total flux cleaned = 0.00290371 Jy ! Component: 2400 - total flux cleaned = 0.0029039 Jy ! Component: 2450 - total flux cleaned = 0.00297708 Jy ! Component: 2500 - total flux cleaned = 0.00297708 Jy ! Component: 2550 - total flux cleaned = 0.00304925 Jy ! Component: 2600 - total flux cleaned = 0.00312119 Jy ! Component: 2650 - total flux cleaned = 0.00321631 Jy ! Component: 2700 - total flux cleaned = 0.0033584 Jy ! Component: 2750 - total flux cleaned = 0.00338189 Jy ! Component: 2800 - total flux cleaned = 0.00347595 Jy ! Component: 2850 - total flux cleaned = 0.00356971 Jy ! Component: 2900 - total flux cleaned = 0.00361637 Jy ! Component: 2950 - total flux cleaned = 0.003779 Jy ! Component: 3000 - total flux cleaned = 0.00389482 Jy ! Component: 3050 - total flux cleaned = 0.00398709 Jy ! Component: 3100 - total flux cleaned = 0.0040794 Jy ! Component: 3150 - total flux cleaned = 0.0042171 Jy ! Component: 3200 - total flux cleaned = 0.00435447 Jy ! Component: 3250 - total flux cleaned = 0.00442302 Jy ! Component: 3300 - total flux cleaned = 0.00453712 Jy ! Component: 3350 - total flux cleaned = 0.00465077 Jy ! Component: 3400 - total flux cleaned = 0.00469641 Jy ! Component: 3450 - total flux cleaned = 0.00478729 Jy ! Component: 3500 - total flux cleaned = 0.00483276 Jy ! Component: 3550 - total flux cleaned = 0.00490094 Jy ! Component: 3600 - total flux cleaned = 0.0049466 Jy ! Component: 3650 - total flux cleaned = 0.00499239 Jy ! Component: 3700 - total flux cleaned = 0.00501536 Jy ! Component: 3750 - total flux cleaned = 0.00506099 Jy ! Component: 3800 - total flux cleaned = 0.00506129 Jy ! Component: 3850 - total flux cleaned = 0.00508443 Jy ! Component: 3900 - total flux cleaned = 0.00506158 Jy ! Component: 3950 - total flux cleaned = 0.00506155 Jy ! Component: 4000 - total flux cleaned = 0.00506156 Jy ! Component: 4050 - total flux cleaned = 0.00501495 Jy ! Total flux subtracted in 4096 components = 0.00499149 Jy ! Clean residual min=-0.001237 max=0.001276 Jy/beam ! Clean residual mean=0.000009 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.348707 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 364 components and 0.348707 Jy ![Exited script file: muppet] wmap "J1521+4336_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.538 x 10.36 at -79.07 degrees (North through East) ! Clean map min=-0.0040908 max=0.31386 Jy/beam ! Writing clean map to FITS file: J1521+4336_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.313855 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000384503 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.367529 0.367529 0.735058 1.47012 2.94023 5.88047 11.7609 23.5219 47.0437 94.0875 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.313 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.538 x 10.36 at -79.07 degrees (North through East) ! Clean map min=-0.0040908 max=0.31386 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1521+4336_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:39:15 2019