! Started logfile: J1521+4336_S_2017_03_23_pus_uvs.log on Mon May 13 10:02:40 2019 obs J1521+4336_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1521+4336_S_2017_03_23_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.750926 visibilities/baseline/integration-bin. ! Found source: J1521+4336 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 3244 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1521+4336_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 107 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.723318Jy sigma=0.006422 ! Fit after self-cal, rms=0.718174Jy sigma=0.006385 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=5.345 mas, bpa=-22.35 degrees ! Estimated noise=1882.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.219229 Jy ! Component: 100 - total flux cleaned = 0.268785 Jy ! Total flux subtracted in 100 components = 0.268785 Jy ! Clean residual min=-0.011874 max=0.017327 Jy/beam ! Clean residual mean=0.000021 rms=0.003136 Jy/beam ! Combined flux in latest and established models = 0.268785 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.268785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108356Jy sigma=0.000879 ! Fit after self-cal, rms=0.108356Jy sigma=0.000879 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.837 mas, bmaj=6.134 mas, bpa=-20.44 degrees ! Estimated noise=1551.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236687 Jy ! Component: 100 - total flux cleaned = 0.0362363 Jy ! Component: 150 - total flux cleaned = 0.043661 Jy ! Component: 200 - total flux cleaned = 0.0467694 Jy ! Total flux subtracted in 200 components = 0.0467694 Jy ! Clean residual min=-0.009441 max=0.010572 Jy/beam ! Clean residual mean=0.000026 rms=0.002349 Jy/beam ! Combined flux in latest and established models = 0.315554 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 37 components and 0.315554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102861Jy sigma=0.000833 ! Fit after self-cal, rms=0.102859Jy sigma=0.000833 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.94 KP 1.03 ! LA 0.99 MK 1.00 NL 0.85 OV 1.03 ! PT 0.99 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.06 HN 0.96 KP 0.99 ! LA 0.92 MK 1.03 NL 0.99 OV 1.03 ! PT 0.93 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.08 HN 0.93 KP 0.84 ! LA 0.76 MK 1.06 NL 1.15 OV 0.96 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.06 HN 0.90 KP 1.00* ! LA 0.79 MK 1.41 NL 1.00* OV 2.80 ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.102859Jy sigma=0.000833 ! Fit after self-cal, rms=0.102593Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.881 mas, bmaj=6.161 mas, bpa=-20.23 degrees ! Estimated noise=1547.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00179276 Jy ! Component: 100 - total flux cleaned = -0.00208742 Jy ! Component: 150 - total flux cleaned = -0.00223987 Jy ! Component: 200 - total flux cleaned = -0.00228725 Jy ! Total flux subtracted in 200 components = -0.00228725 Jy ! Clean residual min=-0.004956 max=0.004690 Jy/beam ! Clean residual mean=-0.000023 rms=0.001233 Jy/beam ! Combined flux in latest and established models = 0.313267 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.313267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102534Jy sigma=0.000683 ! Fit after self-cal, rms=0.102997Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102997Jy sigma=0.000682 ! Fit after self-cal, rms=0.099902Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.878 mas, bmaj=6.17 mas, bpa=-19.92 degrees ! Estimated noise=1547.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000826117 Jy ! Component: 100 - total flux cleaned = -0.000907145 Jy ! Component: 150 - total flux cleaned = -0.0009418 Jy ! Component: 200 - total flux cleaned = -0.000973509 Jy ! Total flux subtracted in 200 components = -0.000973509 Jy ! Clean residual min=-0.003848 max=0.003982 Jy/beam ! Clean residual mean=-0.000005 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.312293 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.312293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099880Jy sigma=0.000669 ! Fit after self-cal, rms=0.099911Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.76007e-07 Jy ! Component: 100 - total flux cleaned = -3.22799e-05 Jy ! Component: 150 - total flux cleaned = -6.15869e-05 Jy ! Component: 200 - total flux cleaned = -6.16112e-05 Jy ! Total flux subtracted in 200 components = -6.16112e-05 Jy ! Clean residual min=-0.003806 max=0.003987 Jy/beam ! Clean residual mean=-0.000005 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.312232 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.312232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099895Jy sigma=0.000669 ! Fit after self-cal, rms=0.099892Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099892Jy sigma=0.000669 ! Fit after self-cal, rms=0.101129Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.881 mas, bmaj=6.171 mas, bpa=-19.86 degrees ! Estimated noise=1548.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000164669 Jy ! Component: 100 - total flux cleaned = -0.000223055 Jy ! Component: 150 - total flux cleaned = -0.000248726 Jy ! Component: 200 - total flux cleaned = -0.000273741 Jy ! Total flux subtracted in 200 components = -0.000273741 Jy ! Clean residual min=-0.003751 max=0.003998 Jy/beam ! Clean residual mean=-0.000004 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.311958 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.311958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101116Jy sigma=0.000669 ! Fit after self-cal, rms=0.101122Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.09323e-05 Jy ! Component: 100 - total flux cleaned = -3.14415e-05 Jy ! Component: 150 - total flux cleaned = -5.46065e-05 Jy ! Component: 200 - total flux cleaned = -7.6088e-05 Jy ! Total flux subtracted in 200 components = -7.6088e-05 Jy ! Clean residual min=-0.003723 max=0.003998 Jy/beam ! Clean residual mean=-0.000004 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.311882 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.311882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101111Jy sigma=0.000669 ! Fit after self-cal, rms=0.101112Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101112Jy sigma=0.000669 ! Fit after self-cal, rms=0.101234Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.348 mas, bmaj=9.394 mas, bpa=-24.68 degrees ! Estimated noise=1820.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000596466 Jy ! Component: 100 - total flux cleaned = -0.000612409 Jy ! Component: 150 - total flux cleaned = -0.000627415 Jy ! Component: 200 - total flux cleaned = -0.000641636 Jy ! Total flux subtracted in 200 components = -0.000641636 Jy ! Clean residual min=-0.003832 max=0.004269 Jy/beam ! Clean residual mean=-0.000007 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.31124 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 59 components and 0.31124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101247Jy sigma=0.000669 ! Fit after self-cal, rms=0.101242Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000108201 Jy ! Component: 100 - total flux cleaned = -0.000121395 Jy ! Component: 150 - total flux cleaned = -0.000133545 Jy ! Component: 200 - total flux cleaned = -0.000156758 Jy ! Total flux subtracted in 200 components = -0.000156758 Jy ! Clean residual min=-0.003851 max=0.004258 Jy/beam ! Clean residual mean=-0.000006 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.311084 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 60 components and 0.311084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101252Jy sigma=0.000669 ! Fit after self-cal, rms=0.101249Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=6.171 mas, bpa=-19.83 degrees ! Estimated noise=1550.62 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.883 x 6.171 at -19.83 degrees (North through East) ! Clean map min=-0.0036374 max=0.28615 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.138 mas, bmaj=5.353 mas, bpa=-21.72 degrees ! Estimated noise=1903.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.22135 Jy ! Component: 100 - total flux cleaned = 0.270767 Jy ! Component: 150 - total flux cleaned = 0.288535 Jy ! Component: 200 - total flux cleaned = 0.298658 Jy ! Total flux subtracted in 200 components = 0.298658 Jy ! Clean residual min=-0.005397 max=0.005593 Jy/beam ! Clean residual mean=0.000002 rms=0.001321 Jy/beam ! Combined flux in latest and established models = 0.298658 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.298658 Jy ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=6.171 mas, bpa=-19.83 degrees ! Estimated noise=1550.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00658169 Jy ! Component: 100 - total flux cleaned = 0.0102617 Jy ! Component: 150 - total flux cleaned = 0.0121292 Jy ! Component: 200 - total flux cleaned = 0.0123236 Jy ! Total flux subtracted in 200 components = 0.0123236 Jy ! Clean residual min=-0.003883 max=0.004041 Jy/beam ! Clean residual mean=-0.000004 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.310981 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.310981 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.348 mas, bmaj=9.394 mas, bpa=-24.68 degrees ! Estimated noise=1820.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014355 Jy ! Component: 100 - total flux cleaned = 0.00016751 Jy ! Component: 150 - total flux cleaned = 0.000188971 Jy ! Component: 200 - total flux cleaned = 0.000189998 Jy ! Total flux subtracted in 200 components = 0.000189998 Jy ! Clean residual min=-0.003760 max=0.004278 Jy/beam ! Clean residual mean=-0.000006 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.311171 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.6056e-05 Jy ! Component: 100 - total flux cleaned = 1.63483e-05 Jy ! Component: 150 - total flux cleaned = 3.14314e-06 Jy ! Component: 200 - total flux cleaned = -1.01253e-05 Jy ! Total flux subtracted in 200 components = -1.01253e-05 Jy ! Clean residual min=-0.003783 max=0.004274 Jy/beam ! Clean residual mean=-0.000006 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.311161 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 53 components and 0.311161 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=6.171 mas, bpa=-19.83 degrees ! Estimated noise=1550.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000437153 Jy ! Component: 100 - total flux cleaned = 0.000436695 Jy ! Component: 150 - total flux cleaned = 0.000436302 Jy ! Component: 200 - total flux cleaned = 0.000475523 Jy ! Total flux subtracted in 200 components = 0.000475523 Jy ! Clean residual min=-0.003785 max=0.003959 Jy/beam ! Clean residual mean=-0.000004 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 0.311637 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 0.311637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101343Jy sigma=0.000670 ! Fit after self-cal, rms=0.101317Jy sigma=0.000670 wmodel J1521+4336_S_2017_03_23_pus_map.mod ! Writing 57 model components to file: J1521+4336_S_2017_03_23_pus_map.mod wobs J1521+4336_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1521+4336_S_2017_03_23_pus_uvs.fits wwins J1521+4336_S_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J1521+4336_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000902235 Jy ! Component: 100 - total flux cleaned = 0.00132245 Jy ! Component: 150 - total flux cleaned = 0.00158987 Jy ! Component: 200 - total flux cleaned = 0.0019805 Jy ! Component: 250 - total flux cleaned = 0.00236011 Jy ! Component: 300 - total flux cleaned = 0.0025447 Jy ! Component: 350 - total flux cleaned = 0.00284515 Jy ! Component: 400 - total flux cleaned = 0.00308042 Jy ! Component: 450 - total flux cleaned = 0.00313818 Jy ! Component: 500 - total flux cleaned = 0.00325176 Jy ! Component: 550 - total flux cleaned = 0.00319688 Jy ! Component: 600 - total flux cleaned = 0.00314217 Jy ! Component: 650 - total flux cleaned = 0.00319456 Jy ! Component: 700 - total flux cleaned = 0.00298507 Jy ! Component: 750 - total flux cleaned = 0.00298586 Jy ! Component: 800 - total flux cleaned = 0.00308722 Jy ! Component: 850 - total flux cleaned = 0.00308583 Jy ! Component: 900 - total flux cleaned = 0.00293709 Jy ! Component: 950 - total flux cleaned = 0.00303486 Jy ! Component: 1000 - total flux cleaned = 0.00293851 Jy ! Component: 1050 - total flux cleaned = 0.0027963 Jy ! Component: 1100 - total flux cleaned = 0.00279714 Jy ! Component: 1150 - total flux cleaned = 0.00275019 Jy ! Component: 1200 - total flux cleaned = 0.00265807 Jy ! Component: 1250 - total flux cleaned = 0.00261327 Jy ! Component: 1300 - total flux cleaned = 0.00252341 Jy ! Component: 1350 - total flux cleaned = 0.00239077 Jy ! Component: 1400 - total flux cleaned = 0.00225988 Jy ! Component: 1450 - total flux cleaned = 0.00208667 Jy ! Component: 1500 - total flux cleaned = 0.00212944 Jy ! Component: 1550 - total flux cleaned = 0.00196041 Jy ! Component: 1600 - total flux cleaned = 0.00179376 Jy ! Component: 1650 - total flux cleaned = 0.00179443 Jy ! Component: 1700 - total flux cleaned = 0.0016705 Jy ! Component: 1750 - total flux cleaned = 0.00138679 Jy ! Component: 1800 - total flux cleaned = 0.00130666 Jy ! Component: 1850 - total flux cleaned = 0.000988861 Jy ! Component: 1900 - total flux cleaned = 0.000831368 Jy ! Component: 1950 - total flux cleaned = 0.00047997 Jy ! Component: 2000 - total flux cleaned = 0.000247654 Jy ! Component: 2050 - total flux cleaned = -0.000134944 Jy ! Component: 2100 - total flux cleaned = -0.000210719 Jy ! Component: 2150 - total flux cleaned = -0.000587493 Jy ! Component: 2200 - total flux cleaned = -0.000848519 Jy ! Component: 2250 - total flux cleaned = -0.00103376 Jy ! Component: 2300 - total flux cleaned = -0.00140044 Jy ! Component: 2350 - total flux cleaned = -0.00169076 Jy ! Component: 2400 - total flux cleaned = -0.00187047 Jy ! Component: 2450 - total flux cleaned = -0.0021561 Jy ! Component: 2500 - total flux cleaned = -0.00240372 Jy ! Component: 2550 - total flux cleaned = -0.00257904 Jy ! Component: 2600 - total flux cleaned = -0.00278767 Jy ! Component: 2650 - total flux cleaned = -0.00302897 Jy ! Component: 2700 - total flux cleaned = -0.00326855 Jy ! Component: 2750 - total flux cleaned = -0.0035057 Jy ! Component: 2800 - total flux cleaned = -0.00377465 Jy ! Component: 2850 - total flux cleaned = -0.00387468 Jy ! Component: 2900 - total flux cleaned = -0.0042059 Jy ! Component: 2950 - total flux cleaned = -0.00430436 Jy ! Component: 3000 - total flux cleaned = -0.00433685 Jy ! Component: 3050 - total flux cleaned = -0.00449917 Jy ! Component: 3100 - total flux cleaned = -0.00475655 Jy ! Component: 3150 - total flux cleaned = -0.00485254 Jy ! Component: 3200 - total flux cleaned = -0.00488426 Jy ! Component: 3250 - total flux cleaned = -0.00504116 Jy ! Component: 3300 - total flux cleaned = -0.00519733 Jy ! Component: 3350 - total flux cleaned = -0.0052282 Jy ! Component: 3400 - total flux cleaned = -0.00516687 Jy ! Component: 3450 - total flux cleaned = -0.00532013 Jy ! Component: 3500 - total flux cleaned = -0.00547225 Jy ! Component: 3550 - total flux cleaned = -0.00538161 Jy ! Component: 3600 - total flux cleaned = -0.00544147 Jy ! Component: 3650 - total flux cleaned = -0.00556093 Jy ! Component: 3700 - total flux cleaned = -0.00556094 Jy ! Component: 3750 - total flux cleaned = -0.00561965 Jy ! Component: 3800 - total flux cleaned = -0.00567813 Jy ! Component: 3850 - total flux cleaned = -0.0056783 Jy ! Component: 3900 - total flux cleaned = -0.00573654 Jy ! Component: 3950 - total flux cleaned = -0.00576527 Jy ! Component: 4000 - total flux cleaned = -0.00587958 Jy ! Component: 4050 - total flux cleaned = -0.00587946 Jy ! Total flux subtracted in 4096 components = -0.00602054 Jy ! Clean residual min=-0.001843 max=0.002077 Jy/beam ! Clean residual mean=-0.000005 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.305616 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 338 components and 0.305616 Jy ![Exited script file: muppet] wmap "J1521+4336_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.883 x 6.171 at -19.83 degrees (North through East) ! Clean map min=-0.0031402 max=0.28646 Jy/beam ! Writing clean map to FITS file: J1521+4336_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.286459 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000502325 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.526071 0.526071 1.05214 2.10428 4.20857 8.41713 16.8343 33.6685 67.3371 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.286 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.883 x 6.171 at -19.83 degrees (North through East) ! Clean map min=-0.0031402 max=0.28646 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1521+4336_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:02:45 2019