! Started logfile: J1521+4336_S_2017_02_24_pus_uvs.log on Sat May 4 11:29:41 2019 obs J1521+4336_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1521+4336_S_2017_02_24_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.804167 visibilities/baseline/integration-bin. ! Found source: J1521+4336 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 2316 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1521+4336_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.694304Jy sigma=0.006750 ! Fit after self-cal, rms=0.692589Jy sigma=0.006734 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=5.582 mas, bpa=5.768 degrees ! Estimated noise=2084.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.238577 Jy ! Component: 100 - total flux cleaned = 0.290657 Jy ! Total flux subtracted in 100 components = 0.290657 Jy ! Clean residual min=-0.009659 max=0.014623 Jy/beam ! Clean residual mean=-0.000004 rms=0.002794 Jy/beam ! Combined flux in latest and established models = 0.290657 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.290657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093446Jy sigma=0.000784 ! Fit after self-cal, rms=0.093437Jy sigma=0.000784 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.569 mas, bmaj=6.573 mas, bpa=8.622 degrees ! Estimated noise=1672.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170017 Jy ! Component: 100 - total flux cleaned = 0.0248108 Jy ! Component: 150 - total flux cleaned = 0.0292865 Jy ! Component: 200 - total flux cleaned = 0.031907 Jy ! Total flux subtracted in 200 components = 0.031907 Jy ! Clean residual min=-0.013820 max=0.010381 Jy/beam ! Clean residual mean=-0.000006 rms=0.002799 Jy/beam ! Combined flux in latest and established models = 0.322564 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.322564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089491Jy sigma=0.000762 ! Fit after self-cal, rms=0.089468Jy sigma=0.000761 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 0.95 KP 1.01 ! LA 0.98 MK 1.01 NL 1.02 OV 1.07 ! PT 1.01 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.87 HN 1.04 KP 0.95 ! LA 0.96 MK 0.99 NL 0.99 OV 1.13 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.88 HN 0.99 KP 1.05 ! LA 1.05 MK 1.02 NL 1.11 OV 0.97 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.86 HN 0.92 KP 1.00* ! LA 1.05 MK 1.31 NL 1.00* OV 1.05 ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.089468Jy sigma=0.000761 ! Fit after self-cal, rms=0.081797Jy sigma=0.000715 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=6.562 mas, bpa=9.145 degrees ! Estimated noise=1683.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336189 Jy ! Component: 100 - total flux cleaned = 0.00375523 Jy ! Component: 150 - total flux cleaned = 0.00381752 Jy ! Component: 200 - total flux cleaned = 0.00396096 Jy ! Total flux subtracted in 200 components = 0.00396096 Jy ! Clean residual min=-0.008225 max=0.008776 Jy/beam ! Clean residual mean=0.000008 rms=0.002430 Jy/beam ! Combined flux in latest and established models = 0.326525 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 0.326525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081520Jy sigma=0.000714 ! Fit after self-cal, rms=0.081567Jy sigma=0.000714 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081567Jy sigma=0.000714 ! Fit after self-cal, rms=0.072607Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.568 mas, bmaj=6.576 mas, bpa=9.381 degrees ! Estimated noise=1680.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266305 Jy ! Component: 100 - total flux cleaned = -5.34984e-05 Jy ! Component: 150 - total flux cleaned = -0.000166078 Jy ! Component: 200 - total flux cleaned = -0.000200294 Jy ! Total flux subtracted in 200 components = -0.000200294 Jy ! Clean residual min=-0.003977 max=0.004655 Jy/beam ! Clean residual mean=-0.000011 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.326325 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.326325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072534Jy sigma=0.000653 ! Fit after self-cal, rms=0.072489Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (126, 61.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337384 Jy ! Component: 100 - total flux cleaned = 0.0035108 Jy ! Component: 150 - total flux cleaned = 0.00368685 Jy ! Component: 200 - total flux cleaned = 0.00394995 Jy ! Total flux subtracted in 200 components = 0.00394995 Jy ! Clean residual min=-0.003801 max=0.003711 Jy/beam ! Clean residual mean=-0.000013 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.330274 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 0.330274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072265Jy sigma=0.000651 ! Fit after self-cal, rms=0.072249Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072249Jy sigma=0.000651 ! Fit after self-cal, rms=0.072114Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=6.58 mas, bpa=9.362 degrees ! Estimated noise=1680.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125462 Jy ! Component: 100 - total flux cleaned = 0.00151298 Jy ! Component: 150 - total flux cleaned = 0.00165642 Jy ! Component: 200 - total flux cleaned = 0.00183477 Jy ! Total flux subtracted in 200 components = 0.00183477 Jy ! Clean residual min=-0.003939 max=0.003868 Jy/beam ! Clean residual mean=-0.000012 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.332109 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.332109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072040Jy sigma=0.000650 ! Fit after self-cal, rms=0.072036Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000278023 Jy ! Component: 100 - total flux cleaned = 0.000320837 Jy ! Component: 150 - total flux cleaned = 0.000439894 Jy ! Component: 200 - total flux cleaned = 0.000550579 Jy ! Total flux subtracted in 200 components = 0.000550579 Jy ! Clean residual min=-0.004019 max=0.003951 Jy/beam ! Clean residual mean=-0.000012 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.33266 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.33266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071994Jy sigma=0.000650 ! Fit after self-cal, rms=0.071993Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071993Jy sigma=0.000650 ! Fit after self-cal, rms=0.071968Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.034 mas, bmaj=9.915 mas, bpa=20.19 degrees ! Estimated noise=2026.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000671995 Jy ! Component: 100 - total flux cleaned = 0.000800924 Jy ! Component: 150 - total flux cleaned = 0.000929636 Jy ! Component: 200 - total flux cleaned = 0.00103476 Jy ! Total flux subtracted in 200 components = 0.00103476 Jy ! Clean residual min=-0.003969 max=0.003940 Jy/beam ! Clean residual mean=-0.000023 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.333695 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 83 components and 0.333695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071952Jy sigma=0.000649 ! Fit after self-cal, rms=0.071950Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.90771e-05 Jy ! Component: 100 - total flux cleaned = 0.000118066 Jy ! Component: 150 - total flux cleaned = 0.000171623 Jy ! Component: 200 - total flux cleaned = 0.000233787 Jy ! Total flux subtracted in 200 components = 0.000233787 Jy ! Clean residual min=-0.003962 max=0.003975 Jy/beam ! Clean residual mean=-0.000023 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.333928 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 88 components and 0.333928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071946Jy sigma=0.000649 ! Fit after self-cal, rms=0.071944Jy sigma=0.000649 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=6.581 mas, bpa=9.361 degrees ! Estimated noise=1680.91 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.567 x 6.581 at 9.361 degrees (North through East) ! Clean map min=-0.0040144 max=0.30752 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=5.578 mas, bpa=6.866 degrees ! Estimated noise=2109.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.241014 Jy ! Component: 100 - total flux cleaned = 0.294062 Jy ! Component: 150 - total flux cleaned = 0.310429 Jy ! Component: 200 - total flux cleaned = 0.319182 Jy ! Total flux subtracted in 200 components = 0.319182 Jy ! Clean residual min=-0.005439 max=0.005223 Jy/beam ! Clean residual mean=-0.000006 rms=0.001363 Jy/beam ! Combined flux in latest and established models = 0.319182 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.319182 Jy ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=6.581 mas, bpa=9.361 degrees ! Estimated noise=1680.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590756 Jy ! Component: 100 - total flux cleaned = 0.00922425 Jy ! Component: 150 - total flux cleaned = 0.0109462 Jy ! Component: 200 - total flux cleaned = 0.011409 Jy ! Total flux subtracted in 200 components = 0.011409 Jy ! Clean residual min=-0.004316 max=0.003595 Jy/beam ! Clean residual mean=-0.000012 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.330591 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 32 components and 0.330591 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.034 mas, bmaj=9.915 mas, bpa=20.19 degrees ! Estimated noise=2026.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185975 Jy ! Component: 100 - total flux cleaned = 0.00268323 Jy ! Component: 150 - total flux cleaned = 0.00299367 Jy ! Component: 200 - total flux cleaned = 0.00313965 Jy ! Total flux subtracted in 200 components = 0.00313965 Jy ! Clean residual min=-0.003879 max=0.004002 Jy/beam ! Clean residual mean=-0.000022 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.333731 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104034 Jy ! Component: 100 - total flux cleaned = 0.000175214 Jy ! Component: 150 - total flux cleaned = 0.000219275 Jy ! Component: 200 - total flux cleaned = 0.000259991 Jy ! Total flux subtracted in 200 components = 0.000259991 Jy ! Clean residual min=-0.003889 max=0.004048 Jy/beam ! Clean residual mean=-0.000022 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.333991 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.333991 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=6.581 mas, bpa=9.361 degrees ! Estimated noise=1680.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000972687 Jy ! Component: 100 - total flux cleaned = -0.00103445 Jy ! Component: 150 - total flux cleaned = -0.000880961 Jy ! Component: 200 - total flux cleaned = -0.000788791 Jy ! Total flux subtracted in 200 components = -0.000788791 Jy ! Clean residual min=-0.004293 max=0.003882 Jy/beam ! Clean residual mean=-0.000012 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.333202 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 57 components and 0.333202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071964Jy sigma=0.000650 ! Fit after self-cal, rms=0.071963Jy sigma=0.000649 wmodel J1521+4336_S_2017_02_24_pus_map.mod ! Writing 57 model components to file: J1521+4336_S_2017_02_24_pus_map.mod wobs J1521+4336_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1521+4336_S_2017_02_24_pus_uvs.fits wwins J1521+4336_S_2017_02_24_pus_map.win ! wwins: Wrote 2 windows to J1521+4336_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000692324 Jy ! Component: 100 - total flux cleaned = -0.00114312 Jy ! Component: 150 - total flux cleaned = -0.00132663 Jy ! Component: 200 - total flux cleaned = -0.00150088 Jy ! Component: 250 - total flux cleaned = -0.00166872 Jy ! Component: 300 - total flux cleaned = -0.00194113 Jy ! Component: 350 - total flux cleaned = -0.00246906 Jy ! Component: 400 - total flux cleaned = -0.00287931 Jy ! Component: 450 - total flux cleaned = -0.00328077 Jy ! Component: 500 - total flux cleaned = -0.00352665 Jy ! Component: 550 - total flux cleaned = -0.00381593 Jy ! Component: 600 - total flux cleaned = -0.00409831 Jy ! Component: 650 - total flux cleaned = -0.00414267 Jy ! Component: 700 - total flux cleaned = -0.00409646 Jy ! Component: 750 - total flux cleaned = -0.00427462 Jy ! Component: 800 - total flux cleaned = -0.00427345 Jy ! Component: 850 - total flux cleaned = -0.00418779 Jy ! Component: 900 - total flux cleaned = -0.00427399 Jy ! Component: 950 - total flux cleaned = -0.00435766 Jy ! Component: 1000 - total flux cleaned = -0.00435744 Jy ! Component: 1050 - total flux cleaned = -0.00439906 Jy ! Component: 1100 - total flux cleaned = -0.0044792 Jy ! Component: 1150 - total flux cleaned = -0.00440034 Jy ! Component: 1200 - total flux cleaned = -0.00447826 Jy ! Component: 1250 - total flux cleaned = -0.00455482 Jy ! Component: 1300 - total flux cleaned = -0.00463003 Jy ! Component: 1350 - total flux cleaned = -0.00463016 Jy ! Component: 1400 - total flux cleaned = -0.00477739 Jy ! Component: 1450 - total flux cleaned = -0.00481396 Jy ! Component: 1500 - total flux cleaned = -0.0049223 Jy ! Component: 1550 - total flux cleaned = -0.00499372 Jy ! Component: 1600 - total flux cleaned = -0.0052025 Jy ! Component: 1650 - total flux cleaned = -0.00516824 Jy ! Component: 1700 - total flux cleaned = -0.00520221 Jy ! Component: 1750 - total flux cleaned = -0.00530261 Jy ! Component: 1800 - total flux cleaned = -0.00536944 Jy ! Component: 1850 - total flux cleaned = -0.00540203 Jy ! Component: 1900 - total flux cleaned = -0.00559661 Jy ! Component: 1950 - total flux cleaned = -0.00553222 Jy ! Component: 2000 - total flux cleaned = -0.00565913 Jy ! Component: 2050 - total flux cleaned = -0.0056903 Jy ! Component: 2100 - total flux cleaned = -0.00575202 Jy ! Component: 2150 - total flux cleaned = -0.00581313 Jy ! Component: 2200 - total flux cleaned = -0.00578266 Jy ! Component: 2250 - total flux cleaned = -0.0058129 Jy ! Component: 2300 - total flux cleaned = -0.00593188 Jy ! Component: 2350 - total flux cleaned = -0.00593161 Jy ! Component: 2400 - total flux cleaned = -0.00593145 Jy ! Component: 2450 - total flux cleaned = -0.0059601 Jy ! Component: 2500 - total flux cleaned = -0.00584492 Jy ! Component: 2550 - total flux cleaned = -0.00593015 Jy ! Component: 2600 - total flux cleaned = -0.00584564 Jy ! Component: 2650 - total flux cleaned = -0.00584579 Jy ! Component: 2700 - total flux cleaned = -0.00584585 Jy ! Component: 2750 - total flux cleaned = -0.0058458 Jy ! Component: 2800 - total flux cleaned = -0.00590011 Jy ! Component: 2850 - total flux cleaned = -0.00579184 Jy ! Component: 2900 - total flux cleaned = -0.00589905 Jy ! Component: 2950 - total flux cleaned = -0.00587213 Jy ! Component: 3000 - total flux cleaned = -0.00595124 Jy ! Component: 3050 - total flux cleaned = -0.00589854 Jy ! Component: 3100 - total flux cleaned = -0.00587273 Jy ! Component: 3150 - total flux cleaned = -0.00582097 Jy ! Component: 3200 - total flux cleaned = -0.0058467 Jy ! Component: 3250 - total flux cleaned = -0.00577035 Jy ! Component: 3300 - total flux cleaned = -0.00579575 Jy ! Component: 3350 - total flux cleaned = -0.00582079 Jy ! Component: 3400 - total flux cleaned = -0.00572102 Jy ! Component: 3450 - total flux cleaned = -0.00574577 Jy ! Component: 3500 - total flux cleaned = -0.00584363 Jy ! Component: 3550 - total flux cleaned = -0.0057706 Jy ! Component: 3600 - total flux cleaned = -0.00581891 Jy ! Component: 3650 - total flux cleaned = -0.00577066 Jy ! Component: 3700 - total flux cleaned = -0.00584227 Jy ! Component: 3750 - total flux cleaned = -0.00586594 Jy ! Component: 3800 - total flux cleaned = -0.00588942 Jy ! Component: 3850 - total flux cleaned = -0.00593608 Jy ! Component: 3900 - total flux cleaned = -0.00600581 Jy ! Component: 3950 - total flux cleaned = -0.00602882 Jy ! Component: 4000 - total flux cleaned = -0.00609769 Jy ! Component: 4050 - total flux cleaned = -0.00614334 Jy ! Total flux subtracted in 4096 components = -0.00623432 Jy ! Clean residual min=-0.001265 max=0.001159 Jy/beam ! Clean residual mean=-0.000006 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.326968 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 334 components and 0.326967 Jy ![Exited script file: muppet] wmap "J1521+4336_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.567 x 6.581 at 9.361 degrees (North through East) ! Clean map min=-0.0026312 max=0.30688 Jy/beam ! Writing clean map to FITS file: J1521+4336_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.306882 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000404759 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.395682 0.395682 0.791364 1.58273 3.16545 6.33091 12.6618 25.3236 50.6473 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.306 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.567 x 6.581 at 9.361 degrees (North through East) ! Clean map min=-0.0026312 max=0.30688 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1521+4336_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:29:45 2019