! Started logfile: J1520-3845_S_2017_06_10_pus_uvs.log on Mon May 6 14:57:00 2019 obs J1520-3845_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1520-3845_S_2017_06_10_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.459004 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1520-3845 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 9584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1520-3845_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 567 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 567 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 481 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 917 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004934Jy sigma=0.006786 ! Fit after self-cal, rms=0.945121Jy sigma=0.006385 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.269 mas, bmaj=6.422 mas, bpa=-2.864 degrees ! Estimated noise=2152.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0469324 Jy ! Component: 100 - total flux cleaned = 0.0572603 Jy ! Total flux subtracted in 100 components = 0.0572603 Jy ! Clean residual min=-0.006326 max=0.006404 Jy/beam ! Clean residual mean=-0.000003 rms=0.001530 Jy/beam ! Combined flux in latest and established models = 0.0572603 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0572603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100090Jy sigma=0.000636 ! Fit after self-cal, rms=0.098768Jy sigma=0.000627 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.769 mas, bmaj=7.505 mas, bpa=-2.874 degrees ! Estimated noise=1352.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00449738 Jy ! Component: 100 - total flux cleaned = 0.00591925 Jy ! Component: 150 - total flux cleaned = 0.0061213 Jy ! Component: 200 - total flux cleaned = 0.00627172 Jy ! Total flux subtracted in 200 components = 0.00627172 Jy ! Clean residual min=-0.003633 max=0.003596 Jy/beam ! Clean residual mean=0.000007 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.063532 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 22 components and 0.063532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098555Jy sigma=0.000626 ! Fit after self-cal, rms=0.098539Jy sigma=0.000625 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.04 ! LA 1.04 MK 1.02 NL 1.00* OV 0.96 ! PT 1.07 SC 1.13 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 1.00* KP 0.95 ! LA 0.97 MK 1.01 NL 1.00* OV 1.04 ! PT 1.00 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.01 ! LA 1.00 MK 1.07 NL 0.82 OV 1.00 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 4. ! A total of 243 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.098539Jy sigma=0.000625 ! Fit after self-cal, rms=0.097481Jy sigma=0.000628 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.794 mas, bmaj=7.575 mas, bpa=-1.51 degrees ! Estimated noise=1398.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000437889 Jy ! Component: 100 - total flux cleaned = 0.000315452 Jy ! Component: 150 - total flux cleaned = 0.000218962 Jy ! Component: 200 - total flux cleaned = 0.000192299 Jy ! Total flux subtracted in 200 components = 0.000192299 Jy ! Clean residual min=-0.003575 max=0.003443 Jy/beam ! Clean residual mean=0.000005 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.0637243 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 26 components and 0.0637243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097446Jy sigma=0.000628 ! Fit after self-cal, rms=0.097306Jy sigma=0.000627 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097306Jy sigma=0.000627 ! Fit after self-cal, rms=0.096536Jy sigma=0.000627 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.789 mas, bmaj=7.564 mas, bpa=-1.409 degrees ! Estimated noise=1390.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369121 Jy ! Component: 100 - total flux cleaned = 0.000212603 Jy ! Component: 150 - total flux cleaned = 0.000122283 Jy ! Component: 200 - total flux cleaned = 0.000119484 Jy ! Total flux subtracted in 200 components = 0.000119484 Jy ! Clean residual min=-0.003850 max=0.003418 Jy/beam ! Clean residual mean=0.000008 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.0638438 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 28 components and 0.0638438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096506Jy sigma=0.000627 ! Fit after self-cal, rms=0.096498Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.89883e-05 Jy ! Component: 100 - total flux cleaned = -5.23456e-05 Jy ! Component: 150 - total flux cleaned = -7.89356e-05 Jy ! Component: 200 - total flux cleaned = -5.6243e-05 Jy ! Total flux subtracted in 200 components = -5.6243e-05 Jy ! Clean residual min=-0.003831 max=0.003479 Jy/beam ! Clean residual mean=0.000008 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.0637875 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 30 components and 0.0637875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096476Jy sigma=0.000627 ! Fit after self-cal, rms=0.096478Jy sigma=0.000627 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096478Jy sigma=0.000627 ! Fit after self-cal, rms=0.096126Jy sigma=0.000626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=7.523 mas, bpa=-1.529 degrees ! Estimated noise=1383.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170635 Jy ! Component: 100 - total flux cleaned = 8.04507e-05 Jy ! Component: 150 - total flux cleaned = 9.51723e-06 Jy ! Component: 200 - total flux cleaned = -7.03076e-05 Jy ! Total flux subtracted in 200 components = -7.03076e-05 Jy ! Clean residual min=-0.003403 max=0.003379 Jy/beam ! Clean residual mean=0.000004 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.0637172 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.0637172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096106Jy sigma=0.000626 ! Fit after self-cal, rms=0.096150Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.1604e-05 Jy ! Component: 100 - total flux cleaned = -8.92251e-05 Jy ! Component: 150 - total flux cleaned = -0.000111677 Jy ! Component: 200 - total flux cleaned = -9.24991e-05 Jy ! Total flux subtracted in 200 components = -9.24991e-05 Jy ! Clean residual min=-0.003645 max=0.003297 Jy/beam ! Clean residual mean=0.000007 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.0636247 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.0636247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096134Jy sigma=0.000626 ! Fit after self-cal, rms=0.096136Jy sigma=0.000626 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096136Jy sigma=0.000626 ! Fit after self-cal, rms=0.095855Jy sigma=0.000626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.254 mas, bmaj=27.17 mas, bpa=1.007 degrees ! Estimated noise=1895.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119237 Jy ! Component: 100 - total flux cleaned = 0.000119593 Jy ! Component: 150 - total flux cleaned = 0.000120125 Jy ! Component: 200 - total flux cleaned = 0.000120329 Jy ! Total flux subtracted in 200 components = 0.000120329 Jy ! Clean residual min=-0.003540 max=0.003400 Jy/beam ! Clean residual mean=0.000013 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.0637451 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 40 components and 0.0637451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095850Jy sigma=0.000626 ! Fit after self-cal, rms=0.095883Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102047 Jy ! Component: 100 - total flux cleaned = -0.000102248 Jy ! Component: 150 - total flux cleaned = -0.00010258 Jy ! Component: 200 - total flux cleaned = -0.000102861 Jy ! Total flux subtracted in 200 components = -0.000102861 Jy ! Clean residual min=-0.003615 max=0.003405 Jy/beam ! Clean residual mean=0.000016 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.0636422 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 41 components and 0.0636422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095878Jy sigma=0.000626 ! Fit after self-cal, rms=0.095875Jy sigma=0.000626 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=7.493 mas, bpa=-1.488 degrees ! Estimated noise=1375.65 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.771 x 7.493 at -1.488 degrees (North through East) ! Clean map min=-0.0037827 max=0.062432 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.287 mas, bmaj=6.43 mas, bpa=-1.844 degrees ! Estimated noise=2114 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0463693 Jy ! Component: 100 - total flux cleaned = 0.0580364 Jy ! Component: 150 - total flux cleaned = 0.0624871 Jy ! Component: 200 - total flux cleaned = 0.0629324 Jy ! Total flux subtracted in 200 components = 0.0629324 Jy ! Clean residual min=-0.005596 max=0.005602 Jy/beam ! Clean residual mean=0.000004 rms=0.001445 Jy/beam ! Combined flux in latest and established models = 0.0629324 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0629324 Jy ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=7.493 mas, bpa=-1.488 degrees ! Estimated noise=1375.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000832301 Jy ! Component: 100 - total flux cleaned = 0.000558436 Jy ! Component: 150 - total flux cleaned = 0.000487717 Jy ! Component: 200 - total flux cleaned = 0.000485947 Jy ! Total flux subtracted in 200 components = 0.000485947 Jy ! Clean residual min=-0.003907 max=0.003243 Jy/beam ! Clean residual mean=0.000007 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.0634184 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 0.0634184 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.254 mas, bmaj=27.17 mas, bpa=1.007 degrees ! Estimated noise=1895.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269861 Jy ! Component: 100 - total flux cleaned = 0.000271512 Jy ! Component: 150 - total flux cleaned = 0.0002729 Jy ! Component: 200 - total flux cleaned = 0.000274042 Jy ! Total flux subtracted in 200 components = 0.000274042 Jy ! Clean residual min=-0.003621 max=0.003392 Jy/beam ! Clean residual mean=0.000017 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.0636924 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.34353e-07 Jy ! Component: 100 - total flux cleaned = 1.61234e-06 Jy ! Component: 150 - total flux cleaned = 7.54804e-07 Jy ! Component: 200 - total flux cleaned = -1.26809e-06 Jy ! Total flux subtracted in 200 components = -1.26809e-06 Jy ! Clean residual min=-0.003579 max=0.003399 Jy/beam ! Clean residual mean=0.000017 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.0636911 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.0636911 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=7.493 mas, bpa=-1.488 degrees ! Estimated noise=1375.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.7709e-06 Jy ! Component: 100 - total flux cleaned = -0.000131492 Jy ! Component: 150 - total flux cleaned = -0.000229633 Jy ! Component: 200 - total flux cleaned = -0.000304097 Jy ! Total flux subtracted in 200 components = -0.000304097 Jy ! Clean residual min=-0.003741 max=0.003520 Jy/beam ! Clean residual mean=0.000006 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.063387 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.0633871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095878Jy sigma=0.000626 ! Fit after self-cal, rms=0.095869Jy sigma=0.000626 wmodel J1520-3845_S_2017_06_10_pus_map.mod ! Writing 35 model components to file: J1520-3845_S_2017_06_10_pus_map.mod wobs J1520-3845_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1520-3845_S_2017_06_10_pus_uvs.fits wwins J1520-3845_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J1520-3845_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000877932 Jy ! Component: 100 - total flux cleaned = -0.0010497 Jy ! Component: 150 - total flux cleaned = -0.00116053 Jy ! Component: 200 - total flux cleaned = -0.00116022 Jy ! Component: 250 - total flux cleaned = -0.00130588 Jy ! Component: 300 - total flux cleaned = -0.00144444 Jy ! Component: 350 - total flux cleaned = -0.00153335 Jy ! Component: 400 - total flux cleaned = -0.00162001 Jy ! Component: 450 - total flux cleaned = -0.00191027 Jy ! Component: 500 - total flux cleaned = -0.00206857 Jy ! Component: 550 - total flux cleaned = -0.00218318 Jy ! Component: 600 - total flux cleaned = -0.0022557 Jy ! Component: 650 - total flux cleaned = -0.00225412 Jy ! Component: 700 - total flux cleaned = -0.002323 Jy ! Component: 750 - total flux cleaned = -0.00235612 Jy ! Component: 800 - total flux cleaned = -0.0022591 Jy ! Component: 850 - total flux cleaned = -0.00238672 Jy ! Component: 900 - total flux cleaned = -0.00235633 Jy ! Component: 950 - total flux cleaned = -0.00241627 Jy ! Component: 1000 - total flux cleaned = -0.00244526 Jy ! Component: 1050 - total flux cleaned = -0.00247378 Jy ! Component: 1100 - total flux cleaned = -0.00252944 Jy ! Component: 1150 - total flux cleaned = -0.00250188 Jy ! Component: 1200 - total flux cleaned = -0.0026628 Jy ! Component: 1250 - total flux cleaned = -0.00268855 Jy ! Component: 1300 - total flux cleaned = -0.00274 Jy ! Component: 1350 - total flux cleaned = -0.00276476 Jy ! Component: 1400 - total flux cleaned = -0.00276472 Jy ! Component: 1450 - total flux cleaned = -0.00278909 Jy ! Component: 1500 - total flux cleaned = -0.0027887 Jy ! Component: 1550 - total flux cleaned = -0.00274165 Jy ! Component: 1600 - total flux cleaned = -0.00269563 Jy ! Component: 1650 - total flux cleaned = -0.00271869 Jy ! Component: 1700 - total flux cleaned = -0.0026735 Jy ! Component: 1750 - total flux cleaned = -0.00269529 Jy ! Component: 1800 - total flux cleaned = -0.00265152 Jy ! Component: 1850 - total flux cleaned = -0.00260818 Jy ! Component: 1900 - total flux cleaned = -0.00254464 Jy ! Component: 1950 - total flux cleaned = -0.0025031 Jy ! Component: 2000 - total flux cleaned = -0.00248296 Jy ! Component: 2050 - total flux cleaned = -0.00246265 Jy ! Component: 2100 - total flux cleaned = -0.00244241 Jy ! Component: 2150 - total flux cleaned = -0.00236426 Jy ! Component: 2200 - total flux cleaned = -0.00232561 Jy ! Component: 2250 - total flux cleaned = -0.00224929 Jy ! Component: 2300 - total flux cleaned = -0.00224933 Jy ! Component: 2350 - total flux cleaned = -0.00221221 Jy ! Component: 2400 - total flux cleaned = -0.00217534 Jy ! Component: 2450 - total flux cleaned = -0.00212099 Jy ! Component: 2500 - total flux cleaned = -0.00199633 Jy ! Component: 2550 - total flux cleaned = -0.00196128 Jy ! Component: 2600 - total flux cleaned = -0.00192642 Jy ! Component: 2650 - total flux cleaned = -0.00184057 Jy ! Component: 2700 - total flux cleaned = -0.00180659 Jy ! Component: 2750 - total flux cleaned = -0.00172267 Jy ! Component: 2800 - total flux cleaned = -0.00165624 Jy ! Component: 2850 - total flux cleaned = -0.0015907 Jy ! Component: 2900 - total flux cleaned = -0.00149359 Jy ! Component: 2950 - total flux cleaned = -0.0014616 Jy ! Component: 3000 - total flux cleaned = -0.00141391 Jy ! Component: 3050 - total flux cleaned = -0.00130409 Jy ! Component: 3100 - total flux cleaned = -0.00121095 Jy ! Component: 3150 - total flux cleaned = -0.00113428 Jy ! Component: 3200 - total flux cleaned = -0.00104282 Jy ! Component: 3250 - total flux cleaned = -0.000952468 Jy ! Component: 3300 - total flux cleaned = -0.000832888 Jy ! Component: 3350 - total flux cleaned = -0.000729321 Jy ! Component: 3400 - total flux cleaned = -0.0006267 Jy ! Component: 3450 - total flux cleaned = -0.000524807 Jy ! Component: 3500 - total flux cleaned = -0.000438154 Jy ! Component: 3550 - total flux cleaned = -0.000337931 Jy ! Component: 3600 - total flux cleaned = -0.000266833 Jy ! Component: 3650 - total flux cleaned = -0.000182092 Jy ! Component: 3700 - total flux cleaned = -8.40926e-05 Jy ! Component: 3750 - total flux cleaned = 1.30199e-05 Jy ! Component: 3800 - total flux cleaned = 9.56976e-05 Jy ! Component: 3850 - total flux cleaned = 0.000150383 Jy ! Component: 3900 - total flux cleaned = 0.000204856 Jy ! Component: 3950 - total flux cleaned = 0.000285996 Jy ! Component: 4000 - total flux cleaned = 0.000366521 Jy ! Component: 4050 - total flux cleaned = 0.000433122 Jy ! Total flux subtracted in 4096 components = 0.000499318 Jy ! Clean residual min=-0.000783 max=0.000736 Jy/beam ! Clean residual mean=0.000002 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.0638864 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 278 components and 0.0638863 Jy ![Exited script file: muppet] wmap "J1520-3845_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.771 x 7.493 at -1.488 degrees (North through East) ! Clean map min=-0.0033248 max=0.062457 Jy/beam ! Writing clean map to FITS file: J1520-3845_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0624568 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000224582 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.07874 1.07874 2.15748 4.31495 8.62991 17.2598 34.5196 69.0393 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.771 x 7.493 at -1.488 degrees (North through East) ! Clean map min=-0.0033248 max=0.062457 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1520-3845_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:57:04 2019