! Started logfile: J1517-2618_S_2017_10_21_pus_uvs.log on Sat May 11 21:00:49 2019 obs J1517-2618_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1517-2618_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.900575 visibilities/baseline/integration-bin. ! Found source: J1517-2618 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 18804 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1517-2618_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 173 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 918 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.956717Jy sigma=0.007310 ! Fit after self-cal, rms=0.921412Jy sigma=0.007084 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.633 mas, bmaj=14.1 mas, bpa=-20.31 degrees ! Estimated noise=1555.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0628245 Jy ! Component: 100 - total flux cleaned = 0.0770652 Jy ! Total flux subtracted in 100 components = 0.0770652 Jy ! Clean residual min=-0.005402 max=0.006699 Jy/beam ! Clean residual mean=-0.000037 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.0770653 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0770653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104684Jy sigma=0.000721 ! Fit after self-cal, rms=0.104489Jy sigma=0.000720 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=17.01 mas, bpa=-20.24 degrees ! Estimated noise=840.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00830415 Jy ! Component: 100 - total flux cleaned = 0.012647 Jy ! Component: 150 - total flux cleaned = 0.0152191 Jy ! Component: 200 - total flux cleaned = 0.0168162 Jy ! Total flux subtracted in 200 components = 0.0168162 Jy ! Clean residual min=-0.003662 max=0.004302 Jy/beam ! Clean residual mean=-0.000051 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.0938815 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 41 components and 0.0938815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103798Jy sigma=0.000715 ! Fit after self-cal, rms=0.103830Jy sigma=0.000715 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.65 FD 0.97 HN 1.09 KP 1.15 ! LA 1.06 MK 1.01 NL 0.90 OV 0.97 ! PT 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.99 KP 1.07 ! LA 0.95 MK 1.00 NL 1.07 OV 1.03 ! PT 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.59 FD 1.03 HN 1.12 KP 1.11 ! LA 0.79 MK 1.02 NL 1.15 OV 0.91 ! PT 0.89 ! ! ! Correcting IF 4. ! A total of 171 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.60 KP 1.00* ! LA 0.73 MK 1.04 NL 1.00* OV 1.00* ! PT 0.85 ! ! ! Fit before self-cal, rms=0.103830Jy sigma=0.000715 ! Fit after self-cal, rms=0.110604Jy sigma=0.000710 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.398 mas, bmaj=17.34 mas, bpa=-20.36 degrees ! Estimated noise=857.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000364187 Jy ! Component: 100 - total flux cleaned = -0.000362871 Jy ! Component: 150 - total flux cleaned = -0.000335892 Jy ! Component: 200 - total flux cleaned = -0.000359802 Jy ! Total flux subtracted in 200 components = -0.000359802 Jy ! Clean residual min=-0.002391 max=0.003262 Jy/beam ! Clean residual mean=-0.000018 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.0935217 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.0935217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110591Jy sigma=0.000710 ! Fit after self-cal, rms=0.110882Jy sigma=0.000709 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110882Jy sigma=0.000709 ! Fit after self-cal, rms=0.113298Jy sigma=0.000709 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=17.35 mas, bpa=-20.44 degrees ! Estimated noise=859.584 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000191472 Jy ! Component: 100 - total flux cleaned = -0.000190378 Jy ! Component: 150 - total flux cleaned = -0.000229882 Jy ! Component: 200 - total flux cleaned = -0.000265442 Jy ! Total flux subtracted in 200 components = -0.000265442 Jy ! Clean residual min=-0.002217 max=0.003353 Jy/beam ! Clean residual mean=-0.000017 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0932562 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.0932562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113290Jy sigma=0.000709 ! Fit after self-cal, rms=0.113362Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-27.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209384 Jy ! Component: 100 - total flux cleaned = 0.00255982 Jy ! Component: 150 - total flux cleaned = 0.00304923 Jy ! Component: 200 - total flux cleaned = 0.00328525 Jy ! Total flux subtracted in 200 components = 0.00328525 Jy ! Clean residual min=-0.002131 max=0.002158 Jy/beam ! Clean residual mean=-0.000008 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.0965415 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 88 components and 0.0965415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113269Jy sigma=0.000708 ! Fit after self-cal, rms=0.113252Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113252Jy sigma=0.000708 ! Fit after self-cal, rms=0.113254Jy sigma=0.000708 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.404 mas, bmaj=17.32 mas, bpa=-20.52 degrees ! Estimated noise=855.097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000823262 Jy ! Component: 100 - total flux cleaned = 0.00098467 Jy ! Component: 150 - total flux cleaned = 0.000886696 Jy ! Component: 200 - total flux cleaned = 0.000857477 Jy ! Total flux subtracted in 200 components = 0.000857477 Jy ! Clean residual min=-0.002204 max=0.002067 Jy/beam ! Clean residual mean=-0.000008 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.097399 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 110 components and 0.097399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113221Jy sigma=0.000707 ! Fit after self-cal, rms=0.113232Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122644 Jy ! Component: 100 - total flux cleaned = 9.5688e-05 Jy ! Component: 150 - total flux cleaned = 6.96701e-05 Jy ! Component: 200 - total flux cleaned = 4.63794e-05 Jy ! Total flux subtracted in 200 components = 4.63794e-05 Jy ! Clean residual min=-0.002205 max=0.002044 Jy/beam ! Clean residual mean=-0.000008 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0974454 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 118 components and 0.0974454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113214Jy sigma=0.000707 ! Fit after self-cal, rms=0.113209Jy sigma=0.000707 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113209Jy sigma=0.000707 ! Fit after self-cal, rms=0.113001Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.445 mas, bmaj=28.66 mas, bpa=-9.401 degrees ! Estimated noise=995.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000252432 Jy ! Component: 100 - total flux cleaned = 0.000337771 Jy ! Component: 150 - total flux cleaned = 0.000284454 Jy ! Component: 200 - total flux cleaned = 0.000253065 Jy ! Total flux subtracted in 200 components = 0.000253065 Jy ! Clean residual min=-0.001956 max=0.001863 Jy/beam ! Clean residual mean=-0.000015 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.0976984 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 137 components and 0.0976984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112993Jy sigma=0.000707 ! Fit after self-cal, rms=0.112989Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.42006e-05 Jy ! Component: 100 - total flux cleaned = -2.02226e-05 Jy ! Component: 150 - total flux cleaned = -3.47122e-05 Jy ! Component: 200 - total flux cleaned = -4.78035e-05 Jy ! Total flux subtracted in 200 components = -4.78035e-05 Jy ! Clean residual min=-0.001952 max=0.001874 Jy/beam ! Clean residual mean=-0.000015 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.0976506 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 151 components and 0.0976506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112985Jy sigma=0.000707 ! Fit after self-cal, rms=0.112978Jy sigma=0.000707 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=17.3 mas, bpa=-20.55 degrees ! Estimated noise=852.687 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.405 x 17.3 at -20.55 degrees (North through East) ! Clean map min=-0.0021353 max=0.080318 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.612 mas, bmaj=14.36 mas, bpa=-20.59 degrees ! Estimated noise=1628.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0642088 Jy ! Component: 100 - total flux cleaned = 0.0788073 Jy ! Component: 150 - total flux cleaned = 0.0851952 Jy ! Component: 200 - total flux cleaned = 0.089786 Jy ! Total flux subtracted in 200 components = 0.089786 Jy ! Clean residual min=-0.004017 max=0.003441 Jy/beam ! Clean residual mean=-0.000015 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.089786 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.089786 Jy ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=17.3 mas, bpa=-20.55 degrees ! Estimated noise=852.687 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002815 Jy ! Component: 100 - total flux cleaned = 0.00404198 Jy ! Component: 150 - total flux cleaned = 0.0049661 Jy ! Component: 200 - total flux cleaned = 0.00582311 Jy ! Total flux subtracted in 200 components = 0.00582311 Jy ! Clean residual min=-0.002161 max=0.002102 Jy/beam ! Clean residual mean=-0.000015 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0956092 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 57 components and 0.0956092 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.445 mas, bmaj=28.66 mas, bpa=-9.401 degrees ! Estimated noise=995.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000936122 Jy ! Component: 100 - total flux cleaned = 0.00119748 Jy ! Component: 150 - total flux cleaned = 0.00126469 Jy ! Component: 200 - total flux cleaned = 0.00132309 Jy ! Total flux subtracted in 200 components = 0.00132309 Jy ! Clean residual min=-0.002138 max=0.001839 Jy/beam ! Clean residual mean=-0.000018 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.0969322 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.62213e-05 Jy ! Component: 100 - total flux cleaned = 2.66793e-05 Jy ! Component: 150 - total flux cleaned = 7.37057e-05 Jy ! Component: 200 - total flux cleaned = 9.46072e-05 Jy ! Total flux subtracted in 200 components = 9.46072e-05 Jy ! Clean residual min=-0.002102 max=0.001833 Jy/beam ! Clean residual mean=-0.000017 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.0970268 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 89 components and 0.0970268 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=17.3 mas, bpa=-20.55 degrees ! Estimated noise=852.687 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00019625 Jy ! Component: 100 - total flux cleaned = -0.000195402 Jy ! Component: 150 - total flux cleaned = -0.00023016 Jy ! Component: 200 - total flux cleaned = -0.00016799 Jy ! Total flux subtracted in 200 components = -0.00016799 Jy ! Clean residual min=-0.002146 max=0.002017 Jy/beam ! Clean residual mean=-0.000011 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.0968588 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 112 components and 0.0968588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113004Jy sigma=0.000707 ! Fit after self-cal, rms=0.112985Jy sigma=0.000707 wmodel J1517-2618_S_2017_10_21_pus_map.mod ! Writing 112 model components to file: J1517-2618_S_2017_10_21_pus_map.mod wobs J1517-2618_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1517-2618_S_2017_10_21_pus_uvs.fits wwins J1517-2618_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J1517-2618_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000521287 Jy ! Component: 100 - total flux cleaned = -0.000801563 Jy ! Component: 150 - total flux cleaned = -0.000964554 Jy ! Component: 200 - total flux cleaned = -0.00114799 Jy ! Component: 250 - total flux cleaned = -0.0012351 Jy ! Component: 300 - total flux cleaned = -0.00134579 Jy ! Component: 350 - total flux cleaned = -0.00153273 Jy ! Component: 400 - total flux cleaned = -0.00171301 Jy ! Component: 450 - total flux cleaned = -0.00193835 Jy ! Component: 500 - total flux cleaned = -0.00208417 Jy ! Component: 550 - total flux cleaned = -0.00215461 Jy ! Component: 600 - total flux cleaned = -0.00217734 Jy ! Component: 650 - total flux cleaned = -0.00233481 Jy ! Component: 700 - total flux cleaned = -0.00240123 Jy ! Component: 750 - total flux cleaned = -0.00253127 Jy ! Component: 800 - total flux cleaned = -0.00267941 Jy ! Component: 850 - total flux cleaned = -0.00272135 Jy ! Component: 900 - total flux cleaned = -0.00284495 Jy ! Component: 950 - total flux cleaned = -0.00290603 Jy ! Component: 1000 - total flux cleaned = -0.00300607 Jy ! Component: 1050 - total flux cleaned = -0.00310454 Jy ! Component: 1100 - total flux cleaned = -0.00325981 Jy ! Component: 1150 - total flux cleaned = -0.00335542 Jy ! Component: 1200 - total flux cleaned = -0.00346864 Jy ! Component: 1250 - total flux cleaned = -0.0035991 Jy ! Component: 1300 - total flux cleaned = -0.00365449 Jy ! Component: 1350 - total flux cleaned = -0.00376344 Jy ! Component: 1400 - total flux cleaned = -0.00385333 Jy ! Component: 1450 - total flux cleaned = -0.00395997 Jy ! Component: 1500 - total flux cleaned = -0.00401268 Jy ! Component: 1550 - total flux cleaned = -0.00406456 Jy ! Component: 1600 - total flux cleaned = -0.00413283 Jy ! Component: 1650 - total flux cleaned = -0.00416634 Jy ! Component: 1700 - total flux cleaned = -0.00419966 Jy ! Component: 1750 - total flux cleaned = -0.00424923 Jy ! Component: 1800 - total flux cleaned = -0.00428192 Jy ! Component: 1850 - total flux cleaned = -0.00428195 Jy ! Component: 1900 - total flux cleaned = -0.00436229 Jy ! Component: 1950 - total flux cleaned = -0.00434617 Jy ! Component: 2000 - total flux cleaned = -0.00434621 Jy ! Component: 2050 - total flux cleaned = -0.00431483 Jy ! Component: 2100 - total flux cleaned = -0.00429939 Jy ! Component: 2150 - total flux cleaned = -0.00426879 Jy ! Component: 2200 - total flux cleaned = -0.00422325 Jy ! Component: 2250 - total flux cleaned = -0.00426859 Jy ! Component: 2300 - total flux cleaned = -0.00423852 Jy ! Component: 2350 - total flux cleaned = -0.00420875 Jy ! Component: 2400 - total flux cleaned = -0.00419401 Jy ! Component: 2450 - total flux cleaned = -0.00417937 Jy ! Component: 2500 - total flux cleaned = -0.00409239 Jy ! Component: 2550 - total flux cleaned = -0.00412139 Jy ! Component: 2600 - total flux cleaned = -0.00409296 Jy ! Component: 2650 - total flux cleaned = -0.00405046 Jy ! Component: 2700 - total flux cleaned = -0.00405049 Jy ! Component: 2750 - total flux cleaned = -0.0040085 Jy ! Component: 2800 - total flux cleaned = -0.00400872 Jy ! Component: 2850 - total flux cleaned = -0.00400881 Jy ! Component: 2900 - total flux cleaned = -0.004036 Jy ! Component: 2950 - total flux cleaned = -0.00400896 Jy ! Component: 3000 - total flux cleaned = -0.00403596 Jy ! Component: 3050 - total flux cleaned = -0.00407604 Jy ! Component: 3100 - total flux cleaned = -0.00407597 Jy ! Component: 3150 - total flux cleaned = -0.00404976 Jy ! Component: 3200 - total flux cleaned = -0.00411528 Jy ! Component: 3250 - total flux cleaned = -0.00412826 Jy ! Component: 3300 - total flux cleaned = -0.00412825 Jy ! Component: 3350 - total flux cleaned = -0.00412828 Jy ! Component: 3400 - total flux cleaned = -0.00411555 Jy ! Component: 3450 - total flux cleaned = -0.00410294 Jy ! Component: 3500 - total flux cleaned = -0.00414077 Jy ! Component: 3550 - total flux cleaned = -0.00412818 Jy ! Component: 3600 - total flux cleaned = -0.00410331 Jy ! Component: 3650 - total flux cleaned = -0.00415288 Jy ! Component: 3700 - total flux cleaned = -0.00416517 Jy ! Component: 3750 - total flux cleaned = -0.00417741 Jy ! Component: 3800 - total flux cleaned = -0.00420179 Jy ! Component: 3850 - total flux cleaned = -0.00422615 Jy ! Component: 3900 - total flux cleaned = -0.00421411 Jy ! Component: 3950 - total flux cleaned = -0.00421411 Jy ! Component: 4000 - total flux cleaned = -0.00425006 Jy ! Component: 4050 - total flux cleaned = -0.00425005 Jy ! Total flux subtracted in 4096 components = -0.00425008 Jy ! Clean residual min=-0.001068 max=0.000747 Jy/beam ! Clean residual mean=-0.000003 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.0926087 Jy keep ! Adding 229 model components to the UV plane model. ! The established model now contains 341 components and 0.0926088 Jy ![Exited script file: muppet] wmap "J1517-2618_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.405 x 17.3 at -20.55 degrees (North through East) ! Clean map min=-0.0016527 max=0.081104 Jy/beam ! Writing clean map to FITS file: J1517-2618_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0811035 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000222205 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.821929 0.821929 1.64386 3.28772 6.57543 13.1509 26.3017 52.6035 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.405 x 17.3 at -20.55 degrees (North through East) ! Clean map min=-0.0016527 max=0.081104 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1517-2618_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:00:54 2019