! Started logfile: J1516+1932_S_2017_03_23_pus_uvs.log on Mon May 13 10:02:35 2019 obs J1516+1932_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1516+1932_S_2017_03_23_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.427778 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1516+1932 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 1232 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1516+1932_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.678217Jy sigma=0.005985 ! Fit after self-cal, rms=0.672229Jy sigma=0.005941 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.726 mas, bmaj=7.626 mas, bpa=-10.5 degrees ! Estimated noise=3025.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.255673 Jy ! Component: 100 - total flux cleaned = 0.318765 Jy ! Total flux subtracted in 100 components = 0.318765 Jy ! Clean residual min=-0.024152 max=0.033376 Jy/beam ! Clean residual mean=0.000103 rms=0.005548 Jy/beam ! Combined flux in latest and established models = 0.318765 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.318765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113085Jy sigma=0.000946 ! Fit after self-cal, rms=0.113052Jy sigma=0.000945 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=8.051 mas, bpa=-8.043 degrees ! Estimated noise=2558.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410126 Jy ! Component: 100 - total flux cleaned = 0.0644028 Jy ! Component: 150 - total flux cleaned = 0.079329 Jy ! Component: 200 - total flux cleaned = 0.0892013 Jy ! Total flux subtracted in 200 components = 0.0892013 Jy ! Clean residual min=-0.013623 max=0.014291 Jy/beam ! Clean residual mean=0.000129 rms=0.003638 Jy/beam ! Combined flux in latest and established models = 0.407966 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 55 components and 0.407966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096994Jy sigma=0.000781 ! Fit after self-cal, rms=0.096974Jy sigma=0.000780 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.98 HN 0.96 KP 1.04 ! LA 0.96 MK 1.00 NL 0.88 OV 1.04 ! PT 0.98 SC 0.94 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.03 HN 0.98 KP 0.99 ! LA 0.96 MK 0.97 NL 1.06 OV 1.05 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.08 HN 0.96 KP 0.88 ! LA 0.79 MK 1.03 NL 1.19 OV 0.97 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.07 HN 0.98 KP 1.00* ! LA 0.78 MK 2.02 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.096974Jy sigma=0.000780 ! Fit after self-cal, rms=0.083815Jy sigma=0.000666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=8.247 mas, bpa=-7.799 degrees ! Estimated noise=2583.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00329445 Jy ! Component: 100 - total flux cleaned = -0.00380794 Jy ! Component: 150 - total flux cleaned = -0.0040274 Jy ! Component: 200 - total flux cleaned = -0.00422436 Jy ! Total flux subtracted in 200 components = -0.00422436 Jy ! Clean residual min=-0.006942 max=0.007339 Jy/beam ! Clean residual mean=0.000029 rms=0.001719 Jy/beam ! Combined flux in latest and established models = 0.403742 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 64 components and 0.403742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083610Jy sigma=0.000665 ! Fit after self-cal, rms=0.083677Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083677Jy sigma=0.000664 ! Fit after self-cal, rms=0.083981Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=8.267 mas, bpa=-7.822 degrees ! Estimated noise=2583.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00226615 Jy ! Component: 100 - total flux cleaned = -0.00250971 Jy ! Component: 150 - total flux cleaned = -0.00266931 Jy ! Component: 200 - total flux cleaned = -0.00285376 Jy ! Total flux subtracted in 200 components = -0.00285376 Jy ! Clean residual min=-0.006904 max=0.007268 Jy/beam ! Clean residual mean=0.000028 rms=0.001681 Jy/beam ! Combined flux in latest and established models = 0.400888 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 65 components and 0.400888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083885Jy sigma=0.000663 ! Fit after self-cal, rms=0.083880Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00647024 Jy ! Component: 100 - total flux cleaned = 0.00833824 Jy ! Component: 150 - total flux cleaned = 0.00932681 Jy ! Component: 200 - total flux cleaned = 0.00942401 Jy ! Total flux subtracted in 200 components = 0.00942401 Jy ! Clean residual min=-0.006208 max=0.005763 Jy/beam ! Clean residual mean=0.000009 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.410312 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 89 components and 0.410312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083303Jy sigma=0.000657 ! Fit after self-cal, rms=0.083268Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083268Jy sigma=0.000657 ! Fit after self-cal, rms=0.083189Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=8.276 mas, bpa=-7.871 degrees ! Estimated noise=2578.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171796 Jy ! Component: 100 - total flux cleaned = 0.00231058 Jy ! Component: 150 - total flux cleaned = 0.00260516 Jy ! Component: 200 - total flux cleaned = 0.00260613 Jy ! Total flux subtracted in 200 components = 0.00260613 Jy ! Clean residual min=-0.005781 max=0.005725 Jy/beam ! Clean residual mean=0.000006 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.412918 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 101 components and 0.412918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083041Jy sigma=0.000655 ! Fit after self-cal, rms=0.083029Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.24163e-05 Jy ! Component: 100 - total flux cleaned = -4.46847e-05 Jy ! Component: 150 - total flux cleaned = -0.000153918 Jy ! Component: 200 - total flux cleaned = -0.00020668 Jy ! Total flux subtracted in 200 components = -0.00020668 Jy ! Clean residual min=-0.005754 max=0.005760 Jy/beam ! Clean residual mean=0.000006 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 0.412712 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 108 components and 0.412712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082948Jy sigma=0.000654 ! Fit after self-cal, rms=0.082942Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082942Jy sigma=0.000654 ! Fit after self-cal, rms=0.082915Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.562 mas, bmaj=11.13 mas, bpa=-5.144 degrees ! Estimated noise=3040.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000817892 Jy ! Component: 100 - total flux cleaned = 0.00100913 Jy ! Component: 150 - total flux cleaned = 0.00115694 Jy ! Component: 200 - total flux cleaned = 0.00115831 Jy ! Total flux subtracted in 200 components = 0.00115831 Jy ! Clean residual min=-0.006226 max=0.006328 Jy/beam ! Clean residual mean=0.000007 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 0.41387 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 126 components and 0.41387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082894Jy sigma=0.000654 ! Fit after self-cal, rms=0.082882Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.66024e-05 Jy ! Component: 100 - total flux cleaned = 8.77669e-05 Jy ! Component: 150 - total flux cleaned = 0.000114365 Jy ! Component: 200 - total flux cleaned = 0.000140617 Jy ! Total flux subtracted in 200 components = 0.000140617 Jy ! Clean residual min=-0.006230 max=0.006297 Jy/beam ! Clean residual mean=0.000007 rms=0.001744 Jy/beam ! Combined flux in latest and established models = 0.41401 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 136 components and 0.414011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082877Jy sigma=0.000654 ! Fit after self-cal, rms=0.082870Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=8.279 mas, bpa=-7.877 degrees ! Estimated noise=2576.3 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.197 x 8.279 at -7.877 degrees (North through East) ! Clean map min=-0.0053578 max=0.33282 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.718 mas, bmaj=7.888 mas, bpa=-10.35 degrees ! Estimated noise=3069.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.259504 Jy ! Component: 100 - total flux cleaned = 0.323016 Jy ! Component: 150 - total flux cleaned = 0.349071 Jy ! Component: 200 - total flux cleaned = 0.363774 Jy ! Total flux subtracted in 200 components = 0.363774 Jy ! Clean residual min=-0.008540 max=0.010612 Jy/beam ! Clean residual mean=0.000041 rms=0.002314 Jy/beam ! Combined flux in latest and established models = 0.363773 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.363773 Jy ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=8.279 mas, bpa=-7.877 degrees ! Estimated noise=2576.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145605 Jy ! Component: 100 - total flux cleaned = 0.0240737 Jy ! Component: 150 - total flux cleaned = 0.0307856 Jy ! Component: 200 - total flux cleaned = 0.0357287 Jy ! Total flux subtracted in 200 components = 0.0357287 Jy ! Clean residual min=-0.006107 max=0.006259 Jy/beam ! Clean residual mean=0.000034 rms=0.001567 Jy/beam ! Combined flux in latest and established models = 0.399502 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 62 components and 0.399502 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.562 mas, bmaj=11.13 mas, bpa=-5.144 degrees ! Estimated noise=3040.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539931 Jy ! Component: 100 - total flux cleaned = 0.00860182 Jy ! Component: 150 - total flux cleaned = 0.0107736 Jy ! Component: 200 - total flux cleaned = 0.0122919 Jy ! Total flux subtracted in 200 components = 0.0122919 Jy ! Clean residual min=-0.006218 max=0.006170 Jy/beam ! Clean residual mean=0.000017 rms=0.001773 Jy/beam ! Combined flux in latest and established models = 0.411794 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000510036 Jy ! Component: 100 - total flux cleaned = 0.000937709 Jy ! Component: 150 - total flux cleaned = 0.00126644 Jy ! Component: 200 - total flux cleaned = 0.00149497 Jy ! Total flux subtracted in 200 components = 0.00149497 Jy ! Clean residual min=-0.006310 max=0.006279 Jy/beam ! Clean residual mean=0.000012 rms=0.001753 Jy/beam ! Combined flux in latest and established models = 0.413289 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 104 components and 0.413289 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=8.279 mas, bpa=-7.877 degrees ! Estimated noise=2576.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000529958 Jy ! Component: 100 - total flux cleaned = -2.95143e-05 Jy ! Component: 150 - total flux cleaned = 0.00011368 Jy ! Component: 200 - total flux cleaned = 0.000178301 Jy ! Total flux subtracted in 200 components = 0.000178301 Jy ! Clean residual min=-0.005426 max=0.005911 Jy/beam ! Clean residual mean=0.000008 rms=0.001369 Jy/beam ! Combined flux in latest and established models = 0.413467 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 119 components and 0.413467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083019Jy sigma=0.000654 ! Fit after self-cal, rms=0.082959Jy sigma=0.000654 wmodel J1516+1932_S_2017_03_23_pus_map.mod ! Writing 119 model components to file: J1516+1932_S_2017_03_23_pus_map.mod wobs J1516+1932_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1516+1932_S_2017_03_23_pus_uvs.fits wwins J1516+1932_S_2017_03_23_pus_map.win ! wwins: Wrote 2 windows to J1516+1932_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145015 Jy ! Component: 100 - total flux cleaned = -0.000415573 Jy ! Component: 150 - total flux cleaned = -0.000932508 Jy ! Component: 200 - total flux cleaned = -0.00141721 Jy ! Component: 250 - total flux cleaned = -0.00149648 Jy ! Component: 300 - total flux cleaned = -0.00135049 Jy ! Component: 350 - total flux cleaned = -0.00113982 Jy ! Component: 400 - total flux cleaned = -0.00100355 Jy ! Component: 450 - total flux cleaned = -0.000614569 Jy ! Component: 500 - total flux cleaned = -0.000615091 Jy ! Component: 550 - total flux cleaned = -0.000554327 Jy ! Component: 600 - total flux cleaned = -0.000495429 Jy ! Component: 650 - total flux cleaned = -0.000206505 Jy ! Component: 700 - total flux cleaned = -0.000151658 Jy ! Component: 750 - total flux cleaned = -0.000205631 Jy ! Component: 800 - total flux cleaned = -0.000205904 Jy ! Component: 850 - total flux cleaned = -0.000205496 Jy ! Component: 900 - total flux cleaned = -0.000154551 Jy ! Component: 950 - total flux cleaned = -0.000255203 Jy ! Component: 1000 - total flux cleaned = -0.000253856 Jy ! Component: 1050 - total flux cleaned = -0.000204257 Jy ! Component: 1100 - total flux cleaned = -0.000299587 Jy ! Component: 1150 - total flux cleaned = -0.000439154 Jy ! Component: 1200 - total flux cleaned = -0.000392635 Jy ! Component: 1250 - total flux cleaned = -0.000527468 Jy ! Component: 1300 - total flux cleaned = -0.000527399 Jy ! Component: 1350 - total flux cleaned = -0.000615058 Jy ! Component: 1400 - total flux cleaned = -0.000915477 Jy ! Component: 1450 - total flux cleaned = -0.000957593 Jy ! Component: 1500 - total flux cleaned = -0.00124837 Jy ! Component: 1550 - total flux cleaned = -0.00133024 Jy ! Component: 1600 - total flux cleaned = -0.00153159 Jy ! Component: 1650 - total flux cleaned = -0.00172988 Jy ! Component: 1700 - total flux cleaned = -0.00180799 Jy ! Component: 1750 - total flux cleaned = -0.00200131 Jy ! Component: 1800 - total flux cleaned = -0.00203915 Jy ! Component: 1850 - total flux cleaned = -0.00215165 Jy ! Component: 1900 - total flux cleaned = -0.00230068 Jy ! Component: 1950 - total flux cleaned = -0.00244749 Jy ! Component: 2000 - total flux cleaned = -0.00248375 Jy ! Component: 2050 - total flux cleaned = -0.002627 Jy ! Component: 2100 - total flux cleaned = -0.00266244 Jy ! Component: 2150 - total flux cleaned = -0.00280213 Jy ! Component: 2200 - total flux cleaned = -0.0027671 Jy ! Component: 2250 - total flux cleaned = -0.00273322 Jy ! Component: 2300 - total flux cleaned = -0.00276774 Jy ! Component: 2350 - total flux cleaned = -0.00283478 Jy ! Component: 2400 - total flux cleaned = -0.00286778 Jy ! Component: 2450 - total flux cleaned = -0.00299867 Jy ! Component: 2500 - total flux cleaned = -0.00303019 Jy ! Component: 2550 - total flux cleaned = -0.00306214 Jy ! Component: 2600 - total flux cleaned = -0.00318947 Jy ! Component: 2650 - total flux cleaned = -0.00331537 Jy ! Component: 2700 - total flux cleaned = -0.00331539 Jy ! Component: 2750 - total flux cleaned = -0.00328467 Jy ! Component: 2800 - total flux cleaned = -0.00328543 Jy ! Component: 2850 - total flux cleaned = -0.00334629 Jy ! Component: 2900 - total flux cleaned = -0.00337629 Jy ! Component: 2950 - total flux cleaned = -0.00334662 Jy ! Component: 3000 - total flux cleaned = -0.00340596 Jy ! Component: 3050 - total flux cleaned = -0.00337616 Jy ! Component: 3100 - total flux cleaned = -0.00328818 Jy ! Component: 3150 - total flux cleaned = -0.00331711 Jy ! Component: 3200 - total flux cleaned = -0.00323065 Jy ! Component: 3250 - total flux cleaned = -0.00331657 Jy ! Component: 3300 - total flux cleaned = -0.00325951 Jy ! Component: 3350 - total flux cleaned = -0.00331604 Jy ! Component: 3400 - total flux cleaned = -0.00325972 Jy ! Component: 3450 - total flux cleaned = -0.00325977 Jy ! Component: 3500 - total flux cleaned = -0.00331507 Jy ! Component: 3550 - total flux cleaned = -0.00323212 Jy ! Component: 3600 - total flux cleaned = -0.00323211 Jy ! Component: 3650 - total flux cleaned = -0.0032593 Jy ! Component: 3700 - total flux cleaned = -0.00325938 Jy ! Component: 3750 - total flux cleaned = -0.00323236 Jy ! Component: 3800 - total flux cleaned = -0.00317856 Jy ! Component: 3850 - total flux cleaned = -0.00333902 Jy ! Component: 3900 - total flux cleaned = -0.00328584 Jy ! Component: 3950 - total flux cleaned = -0.0033651 Jy ! Component: 4000 - total flux cleaned = -0.00328599 Jy ! Component: 4050 - total flux cleaned = -0.00323361 Jy ! Total flux subtracted in 4096 components = -0.00331174 Jy ! Clean residual min=-0.001812 max=0.001896 Jy/beam ! Clean residual mean=0.000004 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.410155 Jy keep ! Adding 252 model components to the UV plane model. ! The established model now contains 371 components and 0.410156 Jy ![Exited script file: muppet] wmap "J1516+1932_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.197 x 8.279 at -7.877 degrees (North through East) ! Clean map min=-0.0034991 max=0.33462 Jy/beam ! Writing clean map to FITS file: J1516+1932_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.334616 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000440703 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.395112 0.395112 0.790225 1.58045 3.1609 6.3218 12.6436 25.2872 50.5744 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.334 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.197 x 8.279 at -7.877 degrees (North through East) ! Clean map min=-0.0034991 max=0.33462 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1516+1932_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:02:40 2019