! Started logfile: J1516+0015_X_2017_02_24_pus_uvs.log on Sat May  4 10:04:02 2019
obs J1516+0015_X_2017_02_24_pus_uva.fits
! Reading UV FITS file: J1516+0015_X_2017_02_24_pus_uva.fits
! AN table 1: 84 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.959259 visibilities/baseline/integration-bin.
! Found source: J1516+0015
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 1882 lines of history.
! 
! Reading 43512 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1516+0015_X_2017_02_24_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.526366Jy  sigma=0.004462
! Fit after  self-cal, rms=0.483999Jy  sigma=0.004123
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=0.7123 mas, bmaj=1.784 mas, bpa=-0.04196 degrees
! Estimated noise=722.47 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.405803 Jy
! Component: 100  -  total flux cleaned = 0.538052 Jy
! Total flux subtracted in 100 components = 0.538052 Jy
! Clean residual min=-0.018278 max=0.054351 Jy/beam
! Clean residual mean=-0.000033 rms=0.005032 Jy/beam
! Combined flux in latest and established models = 0.538052 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.538052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.134800Jy  sigma=0.001153
! Fit after  self-cal, rms=0.134549Jy  sigma=0.001151
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0552696 Jy
! Component: 100  -  total flux cleaned = 0.0799244 Jy
! Total flux subtracted in 100 components = 0.0799244 Jy
! Clean residual min=-0.011941 max=0.030029 Jy/beam
! Clean residual mean=0.000026 rms=0.003045 Jy/beam
! Combined flux in latest and established models = 0.617976 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.617976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107342Jy  sigma=0.000892
! Fit after  self-cal, rms=0.107283Jy  sigma=0.000892
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Added new window around map position (-1.2, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0274158 Jy
! Component: 100  -  total flux cleaned = 0.0422631 Jy
! Total flux subtracted in 100 components = 0.0422631 Jy
! Clean residual min=-0.009616 max=0.018317 Jy/beam
! Clean residual mean=0.000042 rms=0.002302 Jy/beam
! Combined flux in latest and established models = 0.66024 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 23 components and 0.66024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098180Jy  sigma=0.000804
! Fit after  self-cal, rms=0.097736Jy  sigma=0.000800
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Added new window around map position (-2.8, 6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0168602 Jy
! Component: 100  -  total flux cleaned = 0.02708 Jy
! Total flux subtracted in 100 components = 0.02708 Jy
! Clean residual min=-0.006881 max=0.008769 Jy/beam
! Clean residual mean=0.000030 rms=0.001766 Jy/beam
! Combined flux in latest and established models = 0.68732 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 36 components and 0.68732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093503Jy  sigma=0.000757
! Fit after  self-cal, rms=0.093371Jy  sigma=0.000756
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=0.854 mas, bmaj=2 mas, bpa=-0.5862 degrees
! Estimated noise=399.088 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014388 Jy
! Component: 100  -  total flux cleaned = 0.0240018 Jy
! Component: 150  -  total flux cleaned = 0.031141 Jy
! Component: 200  -  total flux cleaned = 0.0365818 Jy
! Total flux subtracted in 200 components = 0.0365818 Jy
! Clean residual min=-0.008533 max=0.009439 Jy/beam
! Clean residual mean=0.000009 rms=0.001888 Jy/beam
! Combined flux in latest and established models = 0.723901 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 71 components and 0.723902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090967Jy  sigma=0.000728
! Fit after  self-cal, rms=0.090846Jy  sigma=0.000727
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        1.04     KP        1.02     
!   LA        1.00     MK        0.97     NL        0.96     OV        0.99     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.07     HN        1.01     KP        1.02     
!   LA        1.01     MK        0.97     NL        0.95     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        1.00     KP        1.02     
!   LA        0.98     MK        0.99     NL        0.95     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.03     KP        1.01     
!   LA        0.98     MK        0.99     NL        0.96     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.99     KP        1.02     
!   LA        0.98     MK        1.00     NL        0.96     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.03     KP        1.00     
!   LA        1.02     MK        0.99     NL        0.96     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        1.01     KP        1.01     
!   LA        0.98     MK        1.01     NL        0.96     OV        1.00     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        1.00     KP        1.00     
!   LA        1.02     MK        0.98     NL        0.96     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        1.01     KP        1.00     
!   LA        0.99     MK        0.98     NL        0.96     OV        1.00     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        1.01     KP        1.01     
!   LA        0.98     MK        1.09     NL        0.96     OV        0.99     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.06     HN        1.04     KP        1.00     
!   LA        0.98     MK        1.07     NL        0.96     OV        0.99     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.03     KP        1.02     
!   LA        0.98     MK        1.09     NL        0.95     OV        1.01     
!   PT        0.97     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.090846Jy  sigma=0.000727
! Fit after  self-cal, rms=0.088992Jy  sigma=0.000700
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=0.8561 mas, bmaj=1.999 mas, bpa=-0.4764 degrees
! Estimated noise=397.01 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00242604 Jy
! Component: 100  -  total flux cleaned = 0.00322834 Jy
! Component: 150  -  total flux cleaned = 0.00379096 Jy
! Component: 200  -  total flux cleaned = 0.00384631 Jy
! Total flux subtracted in 200 components = 0.00384631 Jy
! Clean residual min=-0.003441 max=0.006211 Jy/beam
! Clean residual mean=-0.000002 rms=0.001150 Jy/beam
! Combined flux in latest and established models = 0.727748 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 84 components and 0.727748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088871Jy  sigma=0.000698
! Fit after  self-cal, rms=0.088893Jy  sigma=0.000698
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Added new window around map position (-6, 8.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00634592 Jy
! Component: 100  -  total flux cleaned = 0.0101376 Jy
! Component: 150  -  total flux cleaned = 0.0110138 Jy
! Component: 200  -  total flux cleaned = 0.0117975 Jy
! Total flux subtracted in 200 components = 0.0117975 Jy
! Clean residual min=-0.003426 max=0.004233 Jy/beam
! Clean residual mean=-0.000005 rms=0.000922 Jy/beam
! Combined flux in latest and established models = 0.739545 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 117 components and 0.739545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088376Jy  sigma=0.000694
! Fit after  self-cal, rms=0.088301Jy  sigma=0.000693
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088301Jy  sigma=0.000693
! Fit after  self-cal, rms=0.088297Jy  sigma=0.000681
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=0.8551 mas, bmaj=1.998 mas, bpa=-0.5074 degrees
! Estimated noise=397.293 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00312431 Jy
! Component: 100  -  total flux cleaned = 0.00462962 Jy
! Component: 150  -  total flux cleaned = 0.0053086 Jy
! Component: 200  -  total flux cleaned = 0.00596304 Jy
! Total flux subtracted in 200 components = 0.00596304 Jy
! Clean residual min=-0.002176 max=0.003893 Jy/beam
! Clean residual mean=-0.000003 rms=0.000706 Jy/beam
! Combined flux in latest and established models = 0.745508 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 137 components and 0.745508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088155Jy  sigma=0.000680
! Fit after  self-cal, rms=0.088142Jy  sigma=0.000680
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.4, 12.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00352937 Jy
! Component: 100  -  total flux cleaned = 0.00537744 Jy
! Component: 150  -  total flux cleaned = 0.00623916 Jy
! Component: 200  -  total flux cleaned = 0.00650774 Jy
! Total flux subtracted in 200 components = 0.00650774 Jy
! Clean residual min=-0.002173 max=0.002601 Jy/beam
! Clean residual mean=0.000000 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.752016 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 171 components and 0.752016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087983Jy  sigma=0.000678
! Fit after  self-cal, rms=0.087973Jy  sigma=0.000678
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Added new window around map position (-2, 9.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00242439 Jy
! Component: 100  -  total flux cleaned = 0.00378234 Jy
! Component: 150  -  total flux cleaned = 0.00449269 Jy
! Component: 200  -  total flux cleaned = 0.00472467 Jy
! Total flux subtracted in 200 components = 0.00472467 Jy
! Clean residual min=-0.002065 max=0.001971 Jy/beam
! Clean residual mean=-0.000001 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.756741 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 191 components and 0.756741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087889Jy  sigma=0.000677
! Fit after  self-cal, rms=0.087886Jy  sigma=0.000677
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087886Jy  sigma=0.000677
! Fit after  self-cal, rms=0.088175Jy  sigma=0.000676
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=0.8548 mas, bmaj=1.998 mas, bpa=-0.5344 degrees
! Estimated noise=397.512 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169509 Jy
! Component: 100  -  total flux cleaned = 0.00291871 Jy
! Component: 150  -  total flux cleaned = 0.00349962 Jy
! Component: 200  -  total flux cleaned = 0.00372462 Jy
! Total flux subtracted in 200 components = 0.00372462 Jy
! Clean residual min=-0.001677 max=0.001761 Jy/beam
! Clean residual mean=0.000002 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.760465 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 211 components and 0.760465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088127Jy  sigma=0.000676
! Fit after  self-cal, rms=0.088124Jy  sigma=0.000676
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000438315 Jy
! Component: 100  -  total flux cleaned = 0.000543507 Jy
! Component: 150  -  total flux cleaned = 0.000642714 Jy
! Component: 200  -  total flux cleaned = 0.00070523 Jy
! Total flux subtracted in 200 components = 0.00070523 Jy
! Clean residual min=-0.001676 max=0.001685 Jy/beam
! Clean residual mean=0.000002 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.76117 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 222 components and 0.76117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088101Jy  sigma=0.000675
! Fit after  self-cal, rms=0.088099Jy  sigma=0.000675
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088099Jy  sigma=0.000675
! Fit after  self-cal, rms=0.088126Jy  sigma=0.000675
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=2.143 mas, bmaj=3.376 mas, bpa=2.518 degrees
! Estimated noise=509.606 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183932 Jy
! Component: 100  -  total flux cleaned = 0.00243806 Jy
! Component: 150  -  total flux cleaned = 0.00293328 Jy
! Component: 200  -  total flux cleaned = 0.00307903 Jy
! Total flux subtracted in 200 components = 0.00307903 Jy
! Clean residual min=-0.002009 max=0.002320 Jy/beam
! Clean residual mean=0.000003 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.764249 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 246 components and 0.764249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088118Jy  sigma=0.000675
! Fit after  self-cal, rms=0.088112Jy  sigma=0.000675
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00027013 Jy
! Component: 100  -  total flux cleaned = 0.000340132 Jy
! Component: 150  -  total flux cleaned = 0.000467007 Jy
! Component: 200  -  total flux cleaned = 0.000525468 Jy
! Total flux subtracted in 200 components = 0.000525468 Jy
! Clean residual min=-0.001876 max=0.002158 Jy/beam
! Clean residual mean=0.000003 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.764775 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 251 components and 0.764775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088108Jy  sigma=0.000675
! Fit after  self-cal, rms=0.088106Jy  sigma=0.000675
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=0.8549 mas, bmaj=1.998 mas, bpa=-0.554 degrees
! Estimated noise=397.76 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8549 x 1.998 at -0.554 degrees (North through East)
! Clean map  min=-0.0015248  max=0.52274 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088106Jy  sigma=0.000675
! Fit after  self-cal, rms=0.131345Jy  sigma=0.000612
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=0.8546 mas, bmaj=1.998 mas, bpa=-0.5888 degrees
! Estimated noise=397.728 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000608502 Jy
! Component: 100  -  total flux cleaned = 0.00078931 Jy
! Component: 150  -  total flux cleaned = 0.000852808 Jy
! Component: 200  -  total flux cleaned = 0.000938838 Jy
! Total flux subtracted in 200 components = 0.000938838 Jy
! Clean residual min=-0.001590 max=0.001548 Jy/beam
! Clean residual mean=0.000002 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.765714 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 264 components and 0.765714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.131326Jy  sigma=0.000611
! Fit after  self-cal, rms=0.131325Jy  sigma=0.000611
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000201357 Jy
! Component: 100  -  total flux cleaned = 0.000227404 Jy
! Component: 150  -  total flux cleaned = 0.000302289 Jy
! Component: 200  -  total flux cleaned = 0.000373026 Jy
! Total flux subtracted in 200 components = 0.000373026 Jy
! Clean residual min=-0.001568 max=0.001493 Jy/beam
! Clean residual mean=0.000002 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.766087 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 274 components and 0.766087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.131314Jy  sigma=0.000611
! Fit after  self-cal, rms=0.131314Jy  sigma=0.000611
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.131314Jy  sigma=0.000611
! Fit after  self-cal, rms=0.131441Jy  sigma=0.000611
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=0.7124 mas, bmaj=1.781 mas, bpa=-0.05006 degrees
! Estimated noise=721.599 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.405044 Jy
! Component: 100  -  total flux cleaned = 0.538167 Jy
! Component: 150  -  total flux cleaned = 0.595506 Jy
! Component: 200  -  total flux cleaned = 0.62812 Jy
! Total flux subtracted in 200 components = 0.62812 Jy
! Clean residual min=-0.007567 max=0.017456 Jy/beam
! Clean residual mean=0.000015 rms=0.002348 Jy/beam
! Combined flux in latest and established models = 0.628119 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.628119 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=0.8549 mas, bmaj=1.998 mas, bpa=-0.5956 degrees
! Estimated noise=397.943 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0303688 Jy
! Component: 100  -  total flux cleaned = 0.0507351 Jy
! Component: 150  -  total flux cleaned = 0.0653453 Jy
! Component: 200  -  total flux cleaned = 0.0766461 Jy
! Total flux subtracted in 200 components = 0.0766461 Jy
! Clean residual min=-0.003770 max=0.008259 Jy/beam
! Clean residual mean=0.000001 rms=0.001674 Jy/beam
! Combined flux in latest and established models = 0.704766 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 57 components and 0.704766 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Added new window around map position (-4.2, 7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00953194 Jy
! Component: 100  -  total flux cleaned = 0.0171594 Jy
! Component: 150  -  total flux cleaned = 0.0234615 Jy
! Component: 200  -  total flux cleaned = 0.028753 Jy
! Total flux subtracted in 200 components = 0.028753 Jy
! Clean residual min=-0.002872 max=0.003754 Jy/beam
! Clean residual mean=0.000001 rms=0.000956 Jy/beam
! Combined flux in latest and established models = 0.733519 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 112 components and 0.733519 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=2.143 mas, bmaj=3.375 mas, bpa=2.486 degrees
! Estimated noise=509.878 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00846347 Jy
! Component: 100  -  total flux cleaned = 0.0144005 Jy
! Component: 150  -  total flux cleaned = 0.0188112 Jy
! Component: 200  -  total flux cleaned = 0.0221873 Jy
! Total flux subtracted in 200 components = 0.0221873 Jy
! Clean residual min=-0.002461 max=0.003376 Jy/beam
! Clean residual mean=0.000004 rms=0.000916 Jy/beam
! Combined flux in latest and established models = 0.755706 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00264102 Jy
! Component: 100  -  total flux cleaned = 0.00475052 Jy
! Component: 150  -  total flux cleaned = 0.00645345 Jy
! Component: 200  -  total flux cleaned = 0.00784743 Jy
! Total flux subtracted in 200 components = 0.00784743 Jy
! Clean residual min=-0.001931 max=0.002434 Jy/beam
! Clean residual mean=0.000006 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.763554 Jy
! Adding 138 model components to the UV plane model.
! The established model now contains 229 components and 0.763553 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=0.8549 mas, bmaj=1.998 mas, bpa=-0.5956 degrees
! Estimated noise=397.943 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000726707 Jy
! Component: 100  -  total flux cleaned = 0.000863545 Jy
! Component: 150  -  total flux cleaned = 0.0010221 Jy
! Component: 200  -  total flux cleaned = 0.00116859 Jy
! Total flux subtracted in 200 components = 0.00116859 Jy
! Clean residual min=-0.001675 max=0.001744 Jy/beam
! Clean residual mean=0.000002 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.764722 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 244 components and 0.764722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.131469Jy  sigma=0.000612
! Fit after  self-cal, rms=0.131473Jy  sigma=0.000612
wmodel J1516+0015_X_2017_02_24_pus_map.mod
! Writing 244 model components to file: J1516+0015_X_2017_02_24_pus_map.mod
wobs J1516+0015_X_2017_02_24_pus_uvs.fits
! Writing UV FITS file: J1516+0015_X_2017_02_24_pus_uvs.fits
wwins J1516+0015_X_2017_02_24_pus_map.win
! wwins: Wrote 7 windows to J1516+0015_X_2017_02_24_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000445845 Jy
! Component: 100  -  total flux cleaned = 0.000705432 Jy
! Component: 150  -  total flux cleaned = 0.000868029 Jy
! Component: 200  -  total flux cleaned = 0.000945441 Jy
! Component: 250  -  total flux cleaned = 0.0010197 Jy
! Component: 300  -  total flux cleaned = 0.0011148 Jy
! Component: 350  -  total flux cleaned = 0.00120624 Jy
! Component: 400  -  total flux cleaned = 0.00129505 Jy
! Component: 450  -  total flux cleaned = 0.00131641 Jy
! Component: 500  -  total flux cleaned = 0.00135871 Jy
! Component: 550  -  total flux cleaned = 0.00137882 Jy
! Component: 600  -  total flux cleaned = 0.00137834 Jy
! Component: 650  -  total flux cleaned = 0.00145817 Jy
! Component: 700  -  total flux cleaned = 0.00147741 Jy
! Component: 750  -  total flux cleaned = 0.00151568 Jy
! Component: 800  -  total flux cleaned = 0.00157289 Jy
! Component: 850  -  total flux cleaned = 0.00159196 Jy
! Component: 900  -  total flux cleaned = 0.00168448 Jy
! Component: 950  -  total flux cleaned = 0.00181107 Jy
! Component: 1000  -  total flux cleaned = 0.00184661 Jy
! Component: 1050  -  total flux cleaned = 0.00196956 Jy
! Component: 1100  -  total flux cleaned = 0.00202118 Jy
! Component: 1150  -  total flux cleaned = 0.00207226 Jy
! Component: 1200  -  total flux cleaned = 0.00212303 Jy
! Component: 1250  -  total flux cleaned = 0.00220595 Jy
! Component: 1300  -  total flux cleaned = 0.0022553 Jy
! Component: 1350  -  total flux cleaned = 0.00235231 Jy
! Component: 1400  -  total flux cleaned = 0.00241576 Jy
! Component: 1450  -  total flux cleaned = 0.0024317 Jy
! Component: 1500  -  total flux cleaned = 0.00247867 Jy
! Component: 1550  -  total flux cleaned = 0.0025713 Jy
! Component: 1600  -  total flux cleaned = 0.00260172 Jy
! Component: 1650  -  total flux cleaned = 0.00270764 Jy
! Component: 1700  -  total flux cleaned = 0.00278263 Jy
! Component: 1750  -  total flux cleaned = 0.00284181 Jy
! Component: 1800  -  total flux cleaned = 0.00288564 Jy
! Component: 1850  -  total flux cleaned = 0.00297294 Jy
! Component: 1900  -  total flux cleaned = 0.00305909 Jy
! Component: 1950  -  total flux cleaned = 0.00315838 Jy
! Component: 2000  -  total flux cleaned = 0.00324263 Jy
! Total flux subtracted in 2048 components = 0.00325634 Jy
! Clean residual min=-0.000706 max=0.000796 Jy/beam
! Clean residual mean=0.000001 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.767978 Jy
keep
! Adding 148 model components to the UV plane model.
! The established model now contains 392 components and 0.767978 Jy
![Exited script file: muppet]
wmap "J1516+0015_X_2017_02_24_pus\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8549 x 1.998 at -0.5956 degrees (North through East)
! Clean map  min=-0.0011268  max=0.52309 Jy/beam
! Writing clean map to FITS file: J1516+0015_X_2017_02_24_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.523085 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.0621% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000269677 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.154665 0.154665 0.309331 0.618662 1.23732 2.47465 4.94929 9.89859 19.7972 39.5944 79.1887
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.523 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8549 x 1.998 at -0.5956 degrees (North through East)
! Clean map  min=-0.0011268  max=0.52309 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J1516+0015_X_2017_02_24_pus_uvs.log closed on Sat May  4 10:04:06 2019