! Started logfile: J1514-3617_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:52:05 2019 obs J1514-3617_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1514-3617_S_2017_05_31_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.81272 visibilities/baseline/integration-bin. ! Found source: J1514-3617 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 21212 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1514-3617_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 144 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 781 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.837825Jy sigma=0.004711 ! Fit after self-cal, rms=0.783358Jy sigma=0.004437 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.387 mas, bmaj=6.877 mas, bpa=-3.592 degrees ! Estimated noise=2117.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.173779 Jy ! Component: 100 - total flux cleaned = 0.220823 Jy ! Total flux subtracted in 100 components = 0.220823 Jy ! Clean residual min=-0.014332 max=0.036333 Jy/beam ! Clean residual mean=-0.000011 rms=0.004329 Jy/beam ! Combined flux in latest and established models = 0.220823 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.220823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238428Jy sigma=0.000786 ! Fit after self-cal, rms=0.238405Jy sigma=0.000786 ! Inverting map ! Added new window around map position (3, 8.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0333598 Jy ! Component: 100 - total flux cleaned = 0.050222 Jy ! Total flux subtracted in 100 components = 0.050222 Jy ! Clean residual min=-0.014547 max=0.022470 Jy/beam ! Clean residual mean=0.000013 rms=0.003229 Jy/beam ! Combined flux in latest and established models = 0.271046 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 20 components and 0.271046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229996Jy sigma=0.000734 ! Fit after self-cal, rms=0.229590Jy sigma=0.000730 ! Inverting map ! Added new window around map position (-2, 12). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200848 Jy ! Component: 100 - total flux cleaned = 0.0317439 Jy ! Total flux subtracted in 100 components = 0.0317439 Jy ! Clean residual min=-0.011399 max=0.014563 Jy/beam ! Clean residual mean=0.000035 rms=0.002608 Jy/beam ! Combined flux in latest and established models = 0.302789 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.302789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226101Jy sigma=0.000718 ! Fit after self-cal, rms=0.225917Jy sigma=0.000716 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=8.327 mas, bpa=-3.756 degrees ! Estimated noise=990.572 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0082528 Jy ! Component: 100 - total flux cleaned = 0.00869422 Jy ! Component: 150 - total flux cleaned = 0.0088833 Jy ! Component: 200 - total flux cleaned = 0.00923343 Jy ! Total flux subtracted in 200 components = 0.00923343 Jy ! Clean residual min=-0.011257 max=0.009224 Jy/beam ! Clean residual mean=0.000034 rms=0.002629 Jy/beam ! Combined flux in latest and established models = 0.312023 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 39 components and 0.312023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224922Jy sigma=0.000714 ! Fit after self-cal, rms=0.224895Jy sigma=0.000714 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.95 HN 1.30 KP 1.04 ! LA 1.03 MK 0.99 NL 1.09 OV 0.98 ! PT 1.04 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.40 FD 1.02 HN 1.30 KP 0.99 ! LA 0.98 MK 0.98 NL 1.27 OV 1.02 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.02 HN 1.39 KP 1.01 ! LA 1.01 MK 1.02 NL 1.17 OV 0.93 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 4. ! A total of 186 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.22 KP 0.36 ! LA 1.05 MK 1.02 NL 1.00* OV 1.00* ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.224895Jy sigma=0.000714 ! Fit after self-cal, rms=0.176607Jy sigma=0.000687 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=8.218 mas, bpa=-3.432 degrees ! Estimated noise=1027.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00127061 Jy ! Component: 100 - total flux cleaned = -0.000890955 Jy ! Component: 150 - total flux cleaned = -0.000724757 Jy ! Component: 200 - total flux cleaned = -0.000593239 Jy ! Total flux subtracted in 200 components = -0.000593239 Jy ! Clean residual min=-0.005275 max=0.005972 Jy/beam ! Clean residual mean=0.000005 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.31143 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.31143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176082Jy sigma=0.000685 ! Fit after self-cal, rms=0.176076Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176076Jy sigma=0.000684 ! Fit after self-cal, rms=0.180023Jy sigma=0.000678 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.023 mas, bmaj=8.276 mas, bpa=-3.478 degrees ! Estimated noise=1032.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000492811 Jy ! Component: 100 - total flux cleaned = 0.000232897 Jy ! Component: 150 - total flux cleaned = 1.31019e-05 Jy ! Component: 200 - total flux cleaned = -0.000113033 Jy ! Total flux subtracted in 200 components = -0.000113033 Jy ! Clean residual min=-0.004157 max=0.003175 Jy/beam ! Clean residual mean=-0.000007 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.311317 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.311317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179898Jy sigma=0.000678 ! Fit after self-cal, rms=0.180034Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000313559 Jy ! Component: 100 - total flux cleaned = -0.000427104 Jy ! Component: 150 - total flux cleaned = -0.000527106 Jy ! Component: 200 - total flux cleaned = -0.000654265 Jy ! Total flux subtracted in 200 components = -0.000654265 Jy ! Clean residual min=-0.004118 max=0.003190 Jy/beam ! Clean residual mean=-0.000008 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.310662 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.310662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179981Jy sigma=0.000678 ! Fit after self-cal, rms=0.179983Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179983Jy sigma=0.000678 ! Fit after self-cal, rms=0.185297Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=8.33 mas, bpa=-3.655 degrees ! Estimated noise=1041.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000954584 Jy ! Component: 100 - total flux cleaned = 0.000781893 Jy ! Component: 150 - total flux cleaned = 0.000637492 Jy ! Component: 200 - total flux cleaned = 0.000552275 Jy ! Total flux subtracted in 200 components = 0.000552275 Jy ! Clean residual min=-0.003889 max=0.003138 Jy/beam ! Clean residual mean=-0.000012 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.311215 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 89 components and 0.311215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185226Jy sigma=0.000677 ! Fit after self-cal, rms=0.185285Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130989 Jy ! Component: 100 - total flux cleaned = -0.000246699 Jy ! Component: 150 - total flux cleaned = -0.000315476 Jy ! Component: 200 - total flux cleaned = -0.000407951 Jy ! Total flux subtracted in 200 components = -0.000407951 Jy ! Clean residual min=-0.003780 max=0.003140 Jy/beam ! Clean residual mean=-0.000012 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.310807 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 91 components and 0.310807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185259Jy sigma=0.000677 ! Fit after self-cal, rms=0.185268Jy sigma=0.000677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185268Jy sigma=0.000677 ! Fit after self-cal, rms=0.188488Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.73 mas, bmaj=26.08 mas, bpa=2.915 degrees ! Estimated noise=1302.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102736 Jy ! Component: 100 - total flux cleaned = 0.000952016 Jy ! Component: 150 - total flux cleaned = 0.000821117 Jy ! Component: 200 - total flux cleaned = 0.00071022 Jy ! Total flux subtracted in 200 components = 0.00071022 Jy ! Clean residual min=-0.003771 max=0.003949 Jy/beam ! Clean residual mean=-0.000023 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.311517 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 97 components and 0.311517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188448Jy sigma=0.000677 ! Fit after self-cal, rms=0.188473Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000156041 Jy ! Component: 100 - total flux cleaned = -0.00027686 Jy ! Component: 150 - total flux cleaned = -0.000371279 Jy ! Component: 200 - total flux cleaned = -0.000429076 Jy ! Total flux subtracted in 200 components = -0.000429076 Jy ! Clean residual min=-0.003751 max=0.003913 Jy/beam ! Clean residual mean=-0.000025 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.311088 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 97 components and 0.311088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188464Jy sigma=0.000677 ! Fit after self-cal, rms=0.188467Jy sigma=0.000677 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=8.345 mas, bpa=-3.681 degrees ! Estimated noise=1048.21 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.028 x 8.345 at -3.681 degrees (North through East) ! Clean map min=-0.0035246 max=0.22035 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.393 mas, bmaj=6.883 mas, bpa=-3.285 degrees ! Estimated noise=2256.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.182826 Jy ! Component: 100 - total flux cleaned = 0.238373 Jy ! Component: 150 - total flux cleaned = 0.266571 Jy ! Component: 200 - total flux cleaned = 0.283456 Jy ! Total flux subtracted in 200 components = 0.283456 Jy ! Clean residual min=-0.006864 max=0.011157 Jy/beam ! Clean residual mean=-0.000029 rms=0.001907 Jy/beam ! Combined flux in latest and established models = 0.283456 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.283456 Jy ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=8.345 mas, bpa=-3.681 degrees ! Estimated noise=1048.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141114 Jy ! Component: 100 - total flux cleaned = 0.0208619 Jy ! Component: 150 - total flux cleaned = 0.0239919 Jy ! Component: 200 - total flux cleaned = 0.024552 Jy ! Total flux subtracted in 200 components = 0.024552 Jy ! Clean residual min=-0.003990 max=0.003735 Jy/beam ! Clean residual mean=-0.000016 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.308007 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 50 components and 0.308008 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.73 mas, bmaj=26.08 mas, bpa=2.915 degrees ! Estimated noise=1302.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150378 Jy ! Component: 100 - total flux cleaned = 0.00161209 Jy ! Component: 150 - total flux cleaned = 0.00173469 Jy ! Component: 200 - total flux cleaned = 0.00187323 Jy ! Total flux subtracted in 200 components = 0.00187323 Jy ! Clean residual min=-0.003732 max=0.003836 Jy/beam ! Clean residual mean=-0.000028 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.309881 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.93685e-05 Jy ! Component: 100 - total flux cleaned = 0.000194988 Jy ! Component: 150 - total flux cleaned = 0.000242333 Jy ! Component: 200 - total flux cleaned = 0.000284678 Jy ! Total flux subtracted in 200 components = 0.000284678 Jy ! Clean residual min=-0.003740 max=0.003897 Jy/beam ! Clean residual mean=-0.000027 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.310165 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.310165 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=8.345 mas, bpa=-3.681 degrees ! Estimated noise=1048.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000613926 Jy ! Component: 100 - total flux cleaned = -0.00076213 Jy ! Component: 150 - total flux cleaned = -0.000762727 Jy ! Component: 200 - total flux cleaned = -0.000762764 Jy ! Total flux subtracted in 200 components = -0.000762764 Jy ! Clean residual min=-0.004129 max=0.003195 Jy/beam ! Clean residual mean=-0.000015 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.309403 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 0.309403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188535Jy sigma=0.000677 ! Fit after self-cal, rms=0.188548Jy sigma=0.000677 wmodel J1514-3617_S_2017_05_31_pus_map.mod ! Writing 67 model components to file: J1514-3617_S_2017_05_31_pus_map.mod wobs J1514-3617_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1514-3617_S_2017_05_31_pus_uvs.fits wwins J1514-3617_S_2017_05_31_pus_map.win ! wwins: Wrote 3 windows to J1514-3617_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166616 Jy ! Component: 100 - total flux cleaned = -0.00242378 Jy ! Component: 150 - total flux cleaned = -0.00285433 Jy ! Component: 200 - total flux cleaned = -0.00315884 Jy ! Component: 250 - total flux cleaned = -0.00354361 Jy ! Component: 300 - total flux cleaned = -0.0040053 Jy ! Component: 350 - total flux cleaned = -0.00445053 Jy ! Component: 400 - total flux cleaned = -0.00488105 Jy ! Component: 450 - total flux cleaned = -0.0052131 Jy ! Component: 500 - total flux cleaned = -0.00561617 Jy ! Component: 550 - total flux cleaned = -0.00600879 Jy ! Component: 600 - total flux cleaned = -0.00627731 Jy ! Component: 650 - total flux cleaned = -0.00665097 Jy ! Component: 700 - total flux cleaned = -0.00701606 Jy ! Component: 750 - total flux cleaned = -0.0073378 Jy ! Component: 800 - total flux cleaned = -0.00761786 Jy ! Component: 850 - total flux cleaned = -0.0077553 Jy ! Component: 900 - total flux cleaned = -0.00785596 Jy ! Component: 950 - total flux cleaned = -0.0079225 Jy ! Component: 1000 - total flux cleaned = -0.00802024 Jy ! Component: 1050 - total flux cleaned = -0.00811609 Jy ! Component: 1100 - total flux cleaned = -0.00821037 Jy ! Component: 1150 - total flux cleaned = -0.00824122 Jy ! Component: 1200 - total flux cleaned = -0.00827189 Jy ! Component: 1250 - total flux cleaned = -0.0083927 Jy ! Component: 1300 - total flux cleaned = -0.00842238 Jy ! Component: 1350 - total flux cleaned = -0.0084814 Jy ! Component: 1400 - total flux cleaned = -0.00848215 Jy ! Component: 1450 - total flux cleaned = -0.00856832 Jy ! Component: 1500 - total flux cleaned = -0.00873815 Jy ! Component: 1550 - total flux cleaned = -0.00876537 Jy ! Component: 1600 - total flux cleaned = -0.00879252 Jy ! Component: 1650 - total flux cleaned = -0.0087654 Jy ! Component: 1700 - total flux cleaned = -0.00884634 Jy ! Component: 1750 - total flux cleaned = -0.00879283 Jy ! Component: 1800 - total flux cleaned = -0.00881925 Jy ! Component: 1850 - total flux cleaned = -0.0088451 Jy ! Component: 1900 - total flux cleaned = -0.00876693 Jy ! Component: 1950 - total flux cleaned = -0.00876695 Jy ! Component: 2000 - total flux cleaned = -0.0086399 Jy ! Component: 2050 - total flux cleaned = -0.00869065 Jy ! Component: 2100 - total flux cleaned = -0.00869058 Jy ! Component: 2150 - total flux cleaned = -0.00859172 Jy ! Component: 2200 - total flux cleaned = -0.008616 Jy ! Component: 2250 - total flux cleaned = -0.00854319 Jy ! Component: 2300 - total flux cleaned = -0.00854363 Jy ! Component: 2350 - total flux cleaned = -0.00849587 Jy ! Component: 2400 - total flux cleaned = -0.00849601 Jy ! Component: 2450 - total flux cleaned = -0.00844893 Jy ! Component: 2500 - total flux cleaned = -0.00844925 Jy ! Component: 2550 - total flux cleaned = -0.00849517 Jy ! Component: 2600 - total flux cleaned = -0.00844912 Jy ! Component: 2650 - total flux cleaned = -0.00840351 Jy ! Component: 2700 - total flux cleaned = -0.00838076 Jy ! Component: 2750 - total flux cleaned = -0.00838082 Jy ! Component: 2800 - total flux cleaned = -0.00833659 Jy ! Component: 2850 - total flux cleaned = -0.00831452 Jy ! Component: 2900 - total flux cleaned = -0.00831455 Jy ! Component: 2950 - total flux cleaned = -0.00829279 Jy ! Component: 3000 - total flux cleaned = -0.0083357 Jy ! Component: 3050 - total flux cleaned = -0.00827174 Jy ! Component: 3100 - total flux cleaned = -0.00827179 Jy ! Component: 3150 - total flux cleaned = -0.00822972 Jy ! Component: 3200 - total flux cleaned = -0.00822986 Jy ! Component: 3250 - total flux cleaned = -0.00820926 Jy ! Component: 3300 - total flux cleaned = -0.00818894 Jy ! Component: 3350 - total flux cleaned = -0.00816849 Jy ! Component: 3400 - total flux cleaned = -0.00814834 Jy ! Component: 3450 - total flux cleaned = -0.00814833 Jy ! Component: 3500 - total flux cleaned = -0.00812838 Jy ! Component: 3550 - total flux cleaned = -0.00812833 Jy ! Component: 3600 - total flux cleaned = -0.00812827 Jy ! Component: 3650 - total flux cleaned = -0.00808887 Jy ! Component: 3700 - total flux cleaned = -0.0081472 Jy ! Component: 3750 - total flux cleaned = -0.00808897 Jy ! Component: 3800 - total flux cleaned = -0.00810813 Jy ! Component: 3850 - total flux cleaned = -0.00806975 Jy ! Component: 3900 - total flux cleaned = -0.00810783 Jy ! Component: 3950 - total flux cleaned = -0.00807006 Jy ! Component: 4000 - total flux cleaned = -0.00812654 Jy ! Component: 4050 - total flux cleaned = -0.00810774 Jy ! Total flux subtracted in 4096 components = -0.0082008 Jy ! Clean residual min=-0.001141 max=0.001123 Jy/beam ! Clean residual mean=-0.000005 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.301202 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 322 components and 0.301202 Jy ![Exited script file: muppet] wmap "J1514-3617_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.028 x 8.345 at -3.681 degrees (North through East) ! Clean map min=-0.0029197 max=0.22036 Jy/beam ! Writing clean map to FITS file: J1514-3617_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.220355 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000340142 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.463083 0.463083 0.926165 1.85233 3.70466 7.40932 14.8186 29.6373 59.2746 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.22 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.028 x 8.345 at -3.681 degrees (North through East) ! Clean map min=-0.0029197 max=0.22036 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1514-3617_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:52:10 2019