! Started logfile: J1513-4221_S_2017_06_15_pus_uvs.log on Tue May 7 15:22:35 2019 obs J1513-4221_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1513-4221_S_2017_06_15_pus_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.594074 visibilities/baseline/integration-bin. ! Found source: J1513-4221 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 6416 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1513-4221_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 420 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.941728Jy sigma=0.006105 ! Fit after self-cal, rms=0.897580Jy sigma=0.005816 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.3 mas, bmaj=7.188 mas, bpa=-10.08 degrees ! Estimated noise=3570.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0840589 Jy ! Component: 100 - total flux cleaned = 0.103096 Jy ! Total flux subtracted in 100 components = 0.103096 Jy ! Clean residual min=-0.013354 max=0.018460 Jy/beam ! Clean residual mean=0.000071 rms=0.003864 Jy/beam ! Combined flux in latest and established models = 0.103096 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.103096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108676Jy sigma=0.000692 ! Fit after self-cal, rms=0.108610Jy sigma=0.000691 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.873 mas, bmaj=8.072 mas, bpa=-10.45 degrees ! Estimated noise=1617.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0079094 Jy ! Component: 100 - total flux cleaned = 0.010966 Jy ! Component: 150 - total flux cleaned = 0.0111493 Jy ! Component: 200 - total flux cleaned = 0.0113315 Jy ! Total flux subtracted in 200 components = 0.0113315 Jy ! Clean residual min=-0.008547 max=0.016497 Jy/beam ! Clean residual mean=0.000018 rms=0.003476 Jy/beam ! Combined flux in latest and established models = 0.114427 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.114427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108002Jy sigma=0.000688 ! Fit after self-cal, rms=0.108007Jy sigma=0.000688 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 1.00* KP 0.96 ! LA 0.94 MK 0.99 NL 1.97 OV 0.85 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 0.91 ! LA 0.89 MK 1.03 NL 2.46 OV 0.92 ! PT 0.92 SC 1.05 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 0.90 ! LA 1.16 MK 0.95 NL 1.88 OV 0.88 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 HN 1.00* KP 1.00* ! LA 0.91 MK 0.95 NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.108007Jy sigma=0.000688 ! Fit after self-cal, rms=0.125192Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.906 mas, bmaj=8.076 mas, bpa=-9.417 degrees ! Estimated noise=1681.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012506 Jy ! Component: 100 - total flux cleaned = -0.000159576 Jy ! Component: 150 - total flux cleaned = -7.2621e-05 Jy ! Component: 200 - total flux cleaned = 5.12622e-06 Jy ! Total flux subtracted in 200 components = 5.12622e-06 Jy ! Clean residual min=-0.003600 max=0.003381 Jy/beam ! Clean residual mean=-0.000013 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.114432 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.114432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125167Jy sigma=0.000661 ! Fit after self-cal, rms=0.126308Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126308Jy sigma=0.000659 ! Fit after self-cal, rms=0.136143Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=8.077 mas, bpa=-9.51 degrees ! Estimated noise=1689.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128111 Jy ! Component: 100 - total flux cleaned = 0.000184822 Jy ! Component: 150 - total flux cleaned = 0.000235673 Jy ! Component: 200 - total flux cleaned = 0.000281804 Jy ! Total flux subtracted in 200 components = 0.000281804 Jy ! Clean residual min=-0.003741 max=0.003510 Jy/beam ! Clean residual mean=-0.000013 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.114714 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.114714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136124Jy sigma=0.000658 ! Fit after self-cal, rms=0.136217Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.6012e-05 Jy ! Component: 100 - total flux cleaned = 7.89757e-05 Jy ! Component: 150 - total flux cleaned = 9.9988e-05 Jy ! Component: 200 - total flux cleaned = 0.000120426 Jy ! Total flux subtracted in 200 components = 0.000120426 Jy ! Clean residual min=-0.003767 max=0.003496 Jy/beam ! Clean residual mean=-0.000013 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.114835 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.114835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136205Jy sigma=0.000658 ! Fit after self-cal, rms=0.136207Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136207Jy sigma=0.000658 ! Fit after self-cal, rms=0.138580Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=8.075 mas, bpa=-9.59 degrees ! Estimated noise=1694.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000373134 Jy ! Component: 100 - total flux cleaned = 0.000413431 Jy ! Component: 150 - total flux cleaned = 0.000432779 Jy ! Component: 200 - total flux cleaned = 0.000432789 Jy ! Total flux subtracted in 200 components = 0.000432789 Jy ! Clean residual min=-0.003765 max=0.003470 Jy/beam ! Clean residual mean=-0.000014 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.115267 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.115267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138566Jy sigma=0.000658 ! Fit after self-cal, rms=0.138571Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.6635e-05 Jy ! Component: 100 - total flux cleaned = 1.43413e-05 Jy ! Component: 150 - total flux cleaned = 3.34824e-05 Jy ! Component: 200 - total flux cleaned = 3.41954e-05 Jy ! Total flux subtracted in 200 components = 3.41954e-05 Jy ! Clean residual min=-0.003744 max=0.003448 Jy/beam ! Clean residual mean=-0.000014 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.115302 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 40 components and 0.115302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138562Jy sigma=0.000658 ! Fit after self-cal, rms=0.138561Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138561Jy sigma=0.000658 ! Fit after self-cal, rms=0.139877Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.299 mas, bmaj=29.3 mas, bpa=-5.588 degrees ! Estimated noise=2156.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000516191 Jy ! Component: 100 - total flux cleaned = 0.000527354 Jy ! Component: 150 - total flux cleaned = 0.000549336 Jy ! Component: 200 - total flux cleaned = 0.000559797 Jy ! Total flux subtracted in 200 components = 0.000559797 Jy ! Clean residual min=-0.003166 max=0.003551 Jy/beam ! Clean residual mean=-0.000029 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.115861 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 44 components and 0.115861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139871Jy sigma=0.000658 ! Fit after self-cal, rms=0.139863Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.64863e-05 Jy ! Component: 100 - total flux cleaned = 2.57457e-05 Jy ! Component: 150 - total flux cleaned = 2.53709e-05 Jy ! Component: 200 - total flux cleaned = 2.54355e-05 Jy ! Total flux subtracted in 200 components = 2.54355e-05 Jy ! Clean residual min=-0.003163 max=0.003554 Jy/beam ! Clean residual mean=-0.000029 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.115887 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 0.115887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139862Jy sigma=0.000658 ! Fit after self-cal, rms=0.139855Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=8.07 mas, bpa=-9.669 degrees ! Estimated noise=1697.76 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.903 x 8.07 at -9.669 degrees (North through East) ! Clean map min=-0.0033945 max=0.099904 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.342 mas, bmaj=7.27 mas, bpa=-9.244 degrees ! Estimated noise=3775.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0857825 Jy ! Component: 100 - total flux cleaned = 0.105405 Jy ! Component: 150 - total flux cleaned = 0.112543 Jy ! Component: 200 - total flux cleaned = 0.114452 Jy ! Total flux subtracted in 200 components = 0.114452 Jy ! Clean residual min=-0.009505 max=0.009374 Jy/beam ! Clean residual mean=-0.000004 rms=0.002313 Jy/beam ! Combined flux in latest and established models = 0.114452 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.114452 Jy ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=8.07 mas, bpa=-9.669 degrees ! Estimated noise=1697.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000378944 Jy ! Component: 100 - total flux cleaned = -0.000379683 Jy ! Component: 150 - total flux cleaned = -0.00037987 Jy ! Component: 200 - total flux cleaned = -0.000351631 Jy ! Total flux subtracted in 200 components = -0.000351631 Jy ! Clean residual min=-0.003959 max=0.003644 Jy/beam ! Clean residual mean=-0.000015 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.114101 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 31 components and 0.114101 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.299 mas, bmaj=29.3 mas, bpa=-5.588 degrees ! Estimated noise=2156.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000547772 Jy ! Component: 100 - total flux cleaned = 0.000569236 Jy ! Component: 150 - total flux cleaned = 0.000609384 Jy ! Component: 200 - total flux cleaned = 0.000628605 Jy ! Total flux subtracted in 200 components = 0.000628605 Jy ! Clean residual min=-0.003276 max=0.003693 Jy/beam ! Clean residual mean=-0.000032 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.114729 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.60132e-05 Jy ! Component: 100 - total flux cleaned = 5.35291e-05 Jy ! Component: 150 - total flux cleaned = 6.96799e-05 Jy ! Component: 200 - total flux cleaned = 0.000101545 Jy ! Total flux subtracted in 200 components = 0.000101545 Jy ! Clean residual min=-0.003232 max=0.003701 Jy/beam ! Clean residual mean=-0.000032 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.114831 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 33 components and 0.114831 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=8.07 mas, bpa=-9.669 degrees ! Estimated noise=1697.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00068171 Jy ! Component: 100 - total flux cleaned = -0.000604711 Jy ! Component: 150 - total flux cleaned = -0.00050922 Jy ! Component: 200 - total flux cleaned = -0.000453679 Jy ! Total flux subtracted in 200 components = -0.000453679 Jy ! Clean residual min=-0.003813 max=0.003650 Jy/beam ! Clean residual mean=-0.000015 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.114377 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.114377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139894Jy sigma=0.000658 ! Fit after self-cal, rms=0.139903Jy sigma=0.000658 wmodel J1513-4221_S_2017_06_15_pus_map.mod ! Writing 46 model components to file: J1513-4221_S_2017_06_15_pus_map.mod wobs J1513-4221_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1513-4221_S_2017_06_15_pus_uvs.fits wwins J1513-4221_S_2017_06_15_pus_map.win ! wwins: Wrote 1 windows to J1513-4221_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172413 Jy ! Component: 100 - total flux cleaned = 0.000526842 Jy ! Component: 150 - total flux cleaned = 0.000795267 Jy ! Component: 200 - total flux cleaned = 0.000946343 Jy ! Component: 250 - total flux cleaned = 0.00127943 Jy ! Component: 300 - total flux cleaned = 0.00146154 Jy ! Component: 350 - total flux cleaned = 0.00159184 Jy ! Component: 400 - total flux cleaned = 0.00188359 Jy ! Component: 450 - total flux cleaned = 0.00200446 Jy ! Component: 500 - total flux cleaned = 0.00219887 Jy ! Component: 550 - total flux cleaned = 0.0022369 Jy ! Component: 600 - total flux cleaned = 0.0023096 Jy ! Component: 650 - total flux cleaned = 0.00238004 Jy ! Component: 700 - total flux cleaned = 0.00237943 Jy ! Component: 750 - total flux cleaned = 0.00241359 Jy ! Component: 800 - total flux cleaned = 0.00244695 Jy ! Component: 850 - total flux cleaned = 0.00251155 Jy ! Component: 900 - total flux cleaned = 0.00241712 Jy ! Component: 950 - total flux cleaned = 0.00235515 Jy ! Component: 1000 - total flux cleaned = 0.00226374 Jy ! Component: 1050 - total flux cleaned = 0.00223418 Jy ! Component: 1100 - total flux cleaned = 0.00220437 Jy ! Component: 1150 - total flux cleaned = 0.00211742 Jy ! Component: 1200 - total flux cleaned = 0.00214644 Jy ! Component: 1250 - total flux cleaned = 0.0020612 Jy ! Component: 1300 - total flux cleaned = 0.00194956 Jy ! Component: 1350 - total flux cleaned = 0.00186684 Jy ! Component: 1400 - total flux cleaned = 0.00175792 Jy ! Component: 1450 - total flux cleaned = 0.00165059 Jy ! Component: 1500 - total flux cleaned = 0.00159713 Jy ! Component: 1550 - total flux cleaned = 0.00146533 Jy ! Component: 1600 - total flux cleaned = 0.0013351 Jy ! Component: 1650 - total flux cleaned = 0.00123206 Jy ! Component: 1700 - total flux cleaned = 0.00115541 Jy ! Component: 1750 - total flux cleaned = 0.0010037 Jy ! Component: 1800 - total flux cleaned = 0.000903237 Jy ! Component: 1850 - total flux cleaned = 0.000729126 Jy ! Component: 1900 - total flux cleaned = 0.0005558 Jy ! Component: 1950 - total flux cleaned = 0.000432634 Jy ! Component: 2000 - total flux cleaned = 0.00028539 Jy ! Component: 2050 - total flux cleaned = 0.000163176 Jy ! Component: 2100 - total flux cleaned = 1.6905e-05 Jy ! Component: 2150 - total flux cleaned = -8.02556e-05 Jy ! Component: 2200 - total flux cleaned = -0.000177134 Jy ! Component: 2250 - total flux cleaned = -0.000297767 Jy ! Component: 2300 - total flux cleaned = -0.000418126 Jy ! Component: 2350 - total flux cleaned = -0.000610366 Jy ! Component: 2400 - total flux cleaned = -0.00080222 Jy ! Component: 2450 - total flux cleaned = -0.000970173 Jy ! Component: 2500 - total flux cleaned = -0.00109006 Jy ! Component: 2550 - total flux cleaned = -0.00133008 Jy ! Component: 2600 - total flux cleaned = -0.00152225 Jy ! Component: 2650 - total flux cleaned = -0.00173903 Jy ! Component: 2700 - total flux cleaned = -0.00195604 Jy ! Component: 2750 - total flux cleaned = -0.00212563 Jy ! Component: 2800 - total flux cleaned = -0.00234444 Jy ! Component: 2850 - total flux cleaned = -0.0025153 Jy ! Component: 2900 - total flux cleaned = -0.00266251 Jy ! Component: 2950 - total flux cleaned = -0.00283486 Jy ! Component: 3000 - total flux cleaned = -0.00303314 Jy ! Component: 3050 - total flux cleaned = -0.00315807 Jy ! Component: 3100 - total flux cleaned = -0.00323372 Jy ! Component: 3150 - total flux cleaned = -0.00330969 Jy ! Component: 3200 - total flux cleaned = -0.00336042 Jy ! Component: 3250 - total flux cleaned = -0.00346311 Jy ! Component: 3300 - total flux cleaned = -0.00354101 Jy ! Component: 3350 - total flux cleaned = -0.00361961 Jy ! Component: 3400 - total flux cleaned = -0.00369863 Jy ! Component: 3450 - total flux cleaned = -0.00383173 Jy ! Component: 3500 - total flux cleaned = -0.00393914 Jy ! Component: 3550 - total flux cleaned = -0.00404765 Jy ! Component: 3600 - total flux cleaned = -0.00418481 Jy ! Component: 3650 - total flux cleaned = -0.00429592 Jy ! Component: 3700 - total flux cleaned = -0.00443645 Jy ! Component: 3750 - total flux cleaned = -0.0045505 Jy ! Component: 3800 - total flux cleaned = -0.00472369 Jy ! Component: 3850 - total flux cleaned = -0.0048406 Jy ! Component: 3900 - total flux cleaned = -0.0049888 Jy ! Component: 3950 - total flux cleaned = -0.00510903 Jy ! Component: 4000 - total flux cleaned = -0.00523053 Jy ! Component: 4050 - total flux cleaned = -0.00529274 Jy ! Total flux subtracted in 4096 components = -0.00538674 Jy ! Clean residual min=-0.001743 max=0.001727 Jy/beam ! Clean residual mean=-0.000023 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.10899 Jy keep ! Adding 200 model components to the UV plane model. ! The established model now contains 246 components and 0.10899 Jy ![Exited script file: muppet] wmap "J1513-4221_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.903 x 8.07 at -9.669 degrees (North through East) ! Clean map min=-0.0030188 max=0.1061 Jy/beam ! Writing clean map to FITS file: J1513-4221_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.106096 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00054723 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.54736 1.54736 3.09472 6.18943 12.3789 24.7577 49.5155 99.0309 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.106 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.903 x 8.07 at -9.669 degrees (North through East) ! Clean map min=-0.0030188 max=0.1061 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1513-4221_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:22:39 2019