! Started logfile: J1513-3209_S_2017_10_21_pus_uvs.log on Sat May 11 21:00:44 2019 obs J1513-3209_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1513-3209_S_2017_10_21_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.931034 visibilities/baseline/integration-bin. ! Found source: J1513-3209 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 15552 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1513-3209_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 518 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.868354Jy sigma=0.005776 ! Fit after self-cal, rms=0.820592Jy sigma=0.005418 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.663 mas, bmaj=13.08 mas, bpa=-20.15 degrees ! Estimated noise=1842.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.141473 Jy ! Component: 100 - total flux cleaned = 0.18285 Jy ! Total flux subtracted in 100 components = 0.18285 Jy ! Clean residual min=-0.011706 max=0.020865 Jy/beam ! Clean residual mean=-0.000099 rms=0.003672 Jy/beam ! Combined flux in latest and established models = 0.182851 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.182851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132714Jy sigma=0.000785 ! Fit after self-cal, rms=0.132715Jy sigma=0.000784 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=15.69 mas, bpa=-19.51 degrees ! Estimated noise=1042.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.028431 Jy ! Component: 100 - total flux cleaned = 0.0428151 Jy ! Component: 150 - total flux cleaned = 0.0507135 Jy ! Component: 200 - total flux cleaned = 0.055146 Jy ! Total flux subtracted in 200 components = 0.055146 Jy ! Clean residual min=-0.008035 max=0.007794 Jy/beam ! Clean residual mean=-0.000140 rms=0.002143 Jy/beam ! Combined flux in latest and established models = 0.237997 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 33 components and 0.237997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126981Jy sigma=0.000740 ! Fit after self-cal, rms=0.126986Jy sigma=0.000739 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.08 KP 1.10 ! LA 1.00 MK 0.97 NL 0.94 OV 0.94 ! PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.14 KP 1.04 ! LA 0.98 MK 0.97 NL 1.04 OV 0.96 ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.78 FD 1.02 HN 1.19 KP 1.04 ! LA 0.75 MK 1.00 NL 1.22 OV 0.87 ! PT 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 1.00 KP 1.00* ! LA 0.82 MK 1.06 NL 1.00* OV 1.00* ! PT 0.95 ! ! ! Fit before self-cal, rms=0.126986Jy sigma=0.000739 ! Fit after self-cal, rms=0.141233Jy sigma=0.000714 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=16.06 mas, bpa=-19.85 degrees ! Estimated noise=1056.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00226385 Jy ! Component: 100 - total flux cleaned = -0.00255426 Jy ! Component: 150 - total flux cleaned = -0.00255664 Jy ! Component: 200 - total flux cleaned = -0.00261433 Jy ! Total flux subtracted in 200 components = -0.00261433 Jy ! Clean residual min=-0.003633 max=0.004101 Jy/beam ! Clean residual mean=-0.000024 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.235382 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.235382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141097Jy sigma=0.000714 ! Fit after self-cal, rms=0.141330Jy sigma=0.000713 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141330Jy sigma=0.000713 ! Fit after self-cal, rms=0.147912Jy sigma=0.000710 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.365 mas, bmaj=16.31 mas, bpa=-20.03 degrees ! Estimated noise=1059.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129432 Jy ! Component: 100 - total flux cleaned = -0.00148827 Jy ! Component: 150 - total flux cleaned = -0.00152845 Jy ! Component: 200 - total flux cleaned = -0.00160114 Jy ! Total flux subtracted in 200 components = -0.00160114 Jy ! Clean residual min=-0.003131 max=0.003236 Jy/beam ! Clean residual mean=-0.000016 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.233781 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.233781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147870Jy sigma=0.000710 ! Fit after self-cal, rms=0.147921Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209321 Jy ! Component: 100 - total flux cleaned = -0.000176246 Jy ! Component: 150 - total flux cleaned = -0.000204461 Jy ! Component: 200 - total flux cleaned = -0.000205099 Jy ! Total flux subtracted in 200 components = -0.000205099 Jy ! Clean residual min=-0.003103 max=0.003278 Jy/beam ! Clean residual mean=-0.000017 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.233576 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 67 components and 0.233576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147900Jy sigma=0.000710 ! Fit after self-cal, rms=0.147901Jy sigma=0.000710 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147901Jy sigma=0.000710 ! Fit after self-cal, rms=0.155672Jy sigma=0.000709 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.374 mas, bmaj=16.5 mas, bpa=-20.19 degrees ! Estimated noise=1063.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105335 Jy ! Component: 100 - total flux cleaned = -0.00123082 Jy ! Component: 150 - total flux cleaned = -0.00138077 Jy ! Component: 200 - total flux cleaned = -0.00147969 Jy ! Total flux subtracted in 200 components = -0.00147969 Jy ! Clean residual min=-0.002896 max=0.003111 Jy/beam ! Clean residual mean=-0.000014 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.232096 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 73 components and 0.232096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155637Jy sigma=0.000709 ! Fit after self-cal, rms=0.155673Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000113862 Jy ! Component: 100 - total flux cleaned = -0.000168204 Jy ! Component: 150 - total flux cleaned = -0.000217179 Jy ! Component: 200 - total flux cleaned = -0.000263264 Jy ! Total flux subtracted in 200 components = -0.000263264 Jy ! Clean residual min=-0.002907 max=0.003171 Jy/beam ! Clean residual mean=-0.000015 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.231833 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 78 components and 0.231833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155660Jy sigma=0.000709 ! Fit after self-cal, rms=0.155661Jy sigma=0.000709 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155661Jy sigma=0.000709 ! Fit after self-cal, rms=0.158209Jy sigma=0.000709 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.73 mas, bmaj=31.31 mas, bpa=-7.354 degrees ! Estimated noise=1232.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000842072 Jy ! Component: 100 - total flux cleaned = -0.000841438 Jy ! Component: 150 - total flux cleaned = -0.000854887 Jy ! Component: 200 - total flux cleaned = -0.000894734 Jy ! Total flux subtracted in 200 components = -0.000894734 Jy ! Clean residual min=-0.003355 max=0.003387 Jy/beam ! Clean residual mean=-0.000020 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.230938 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 85 components and 0.230938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158200Jy sigma=0.000709 ! Fit after self-cal, rms=0.158213Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.61644e-05 Jy ! Component: 100 - total flux cleaned = -6.42078e-06 Jy ! Component: 150 - total flux cleaned = -6.84633e-06 Jy ! Component: 200 - total flux cleaned = -6.17963e-06 Jy ! Total flux subtracted in 200 components = -6.17963e-06 Jy ! Clean residual min=-0.003341 max=0.003351 Jy/beam ! Clean residual mean=-0.000020 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.230932 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 94 components and 0.230932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158213Jy sigma=0.000709 ! Fit after self-cal, rms=0.158214Jy sigma=0.000709 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=16.58 mas, bpa=-20.24 degrees ! Estimated noise=1064.54 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.378 x 16.58 at -20.24 degrees (North through East) ! Clean map min=-0.0027269 max=0.19046 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.676 mas, bmaj=13.85 mas, bpa=-20.94 degrees ! Estimated noise=1966.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149871 Jy ! Component: 100 - total flux cleaned = 0.188302 Jy ! Component: 150 - total flux cleaned = 0.206069 Jy ! Component: 200 - total flux cleaned = 0.216437 Jy ! Total flux subtracted in 200 components = 0.216437 Jy ! Clean residual min=-0.006309 max=0.006921 Jy/beam ! Clean residual mean=-0.000022 rms=0.001645 Jy/beam ! Combined flux in latest and established models = 0.216437 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.216437 Jy ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=16.58 mas, bpa=-20.24 degrees ! Estimated noise=1064.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00772523 Jy ! Component: 100 - total flux cleaned = 0.0111255 Jy ! Component: 150 - total flux cleaned = 0.0120872 Jy ! Component: 200 - total flux cleaned = 0.0124483 Jy ! Total flux subtracted in 200 components = 0.0124483 Jy ! Clean residual min=-0.003043 max=0.003229 Jy/beam ! Clean residual mean=-0.000019 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.228886 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.228886 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.73 mas, bmaj=31.31 mas, bpa=-7.354 degrees ! Estimated noise=1232.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124444 Jy ! Component: 100 - total flux cleaned = 0.00128591 Jy ! Component: 150 - total flux cleaned = 0.00143057 Jy ! Component: 200 - total flux cleaned = 0.00155199 Jy ! Total flux subtracted in 200 components = 0.00155199 Jy ! Clean residual min=-0.003403 max=0.003221 Jy/beam ! Clean residual mean=-0.000023 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.230438 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103382 Jy ! Component: 100 - total flux cleaned = 0.000194062 Jy ! Component: 150 - total flux cleaned = 0.00029643 Jy ! Component: 200 - total flux cleaned = 0.000368403 Jy ! Total flux subtracted in 200 components = 0.000368403 Jy ! Clean residual min=-0.003382 max=0.003219 Jy/beam ! Clean residual mean=-0.000021 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.230806 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 0.230806 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=16.58 mas, bpa=-20.24 degrees ! Estimated noise=1064.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000341 Jy ! Component: 100 - total flux cleaned = -0.000403021 Jy ! Component: 150 - total flux cleaned = -0.000404321 Jy ! Component: 200 - total flux cleaned = -0.000406451 Jy ! Total flux subtracted in 200 components = -0.000406451 Jy ! Clean residual min=-0.002942 max=0.002927 Jy/beam ! Clean residual mean=-0.000014 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.230399 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 73 components and 0.230399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158449Jy sigma=0.000709 ! Fit after self-cal, rms=0.158360Jy sigma=0.000709 wmodel J1513-3209_S_2017_10_21_pus_map.mod ! Writing 73 model components to file: J1513-3209_S_2017_10_21_pus_map.mod wobs J1513-3209_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1513-3209_S_2017_10_21_pus_uvs.fits wwins J1513-3209_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1513-3209_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022416 Jy ! Component: 100 - total flux cleaned = 3.60299e-05 Jy ! Component: 150 - total flux cleaned = -0.000314441 Jy ! Component: 200 - total flux cleaned = -0.000730498 Jy ! Component: 250 - total flux cleaned = -0.000968931 Jy ! Component: 300 - total flux cleaned = -0.00104465 Jy ! Component: 350 - total flux cleaned = -0.00108164 Jy ! Component: 400 - total flux cleaned = -0.00115409 Jy ! Component: 450 - total flux cleaned = -0.00129556 Jy ! Component: 500 - total flux cleaned = -0.00143337 Jy ! Component: 550 - total flux cleaned = -0.00150035 Jy ! Component: 600 - total flux cleaned = -0.00146711 Jy ! Component: 650 - total flux cleaned = -0.00146733 Jy ! Component: 700 - total flux cleaned = -0.00146695 Jy ! Component: 750 - total flux cleaned = -0.00146668 Jy ! Component: 800 - total flux cleaned = -0.00149729 Jy ! Component: 850 - total flux cleaned = -0.0015864 Jy ! Component: 900 - total flux cleaned = -0.0015572 Jy ! Component: 950 - total flux cleaned = -0.00158635 Jy ! Component: 1000 - total flux cleaned = -0.0017281 Jy ! Component: 1050 - total flux cleaned = -0.00181158 Jy ! Component: 1100 - total flux cleaned = -0.00186638 Jy ! Component: 1150 - total flux cleaned = -0.00194831 Jy ! Component: 1200 - total flux cleaned = -0.00208275 Jy ! Component: 1250 - total flux cleaned = -0.00218857 Jy ! Component: 1300 - total flux cleaned = -0.00229309 Jy ! Component: 1350 - total flux cleaned = -0.002371 Jy ! Component: 1400 - total flux cleaned = -0.00252419 Jy ! Component: 1450 - total flux cleaned = -0.00252417 Jy ! Component: 1500 - total flux cleaned = -0.00259875 Jy ! Component: 1550 - total flux cleaned = -0.00269737 Jy ! Component: 1600 - total flux cleaned = -0.00267301 Jy ! Component: 1650 - total flux cleaned = -0.00267293 Jy ! Component: 1700 - total flux cleaned = -0.00274434 Jy ! Component: 1750 - total flux cleaned = -0.0027206 Jy ! Component: 1800 - total flux cleaned = -0.00269768 Jy ! Component: 1850 - total flux cleaned = -0.00272074 Jy ! Component: 1900 - total flux cleaned = -0.00278936 Jy ! Component: 1950 - total flux cleaned = -0.00278937 Jy ! Component: 2000 - total flux cleaned = -0.00285644 Jy ! Component: 2050 - total flux cleaned = -0.00290094 Jy ! Component: 2100 - total flux cleaned = -0.0029892 Jy ! Component: 2150 - total flux cleaned = -0.00309881 Jy ! Component: 2200 - total flux cleaned = -0.00318563 Jy ! Component: 2250 - total flux cleaned = -0.00327171 Jy ! Component: 2300 - total flux cleaned = -0.00337846 Jy ! Component: 2350 - total flux cleaned = -0.00335718 Jy ! Component: 2400 - total flux cleaned = -0.00348355 Jy ! Component: 2450 - total flux cleaned = -0.00348373 Jy ! Component: 2500 - total flux cleaned = -0.00356689 Jy ! Component: 2550 - total flux cleaned = -0.00364923 Jy ! Component: 2600 - total flux cleaned = -0.00364938 Jy ! Component: 2650 - total flux cleaned = -0.00379191 Jy ! Component: 2700 - total flux cleaned = -0.00383237 Jy ! Component: 2750 - total flux cleaned = -0.00389274 Jy ! Component: 2800 - total flux cleaned = -0.00399275 Jy ! Component: 2850 - total flux cleaned = -0.00403239 Jy ! Component: 2900 - total flux cleaned = -0.00405203 Jy ! Component: 2950 - total flux cleaned = -0.00411106 Jy ! Component: 3000 - total flux cleaned = -0.00407186 Jy ! Component: 3050 - total flux cleaned = -0.00414981 Jy ! Component: 3100 - total flux cleaned = -0.00413042 Jy ! Component: 3150 - total flux cleaned = -0.00414971 Jy ! Component: 3200 - total flux cleaned = -0.0041306 Jy ! Component: 3250 - total flux cleaned = -0.00414972 Jy ! Component: 3300 - total flux cleaned = -0.00418783 Jy ! Component: 3350 - total flux cleaned = -0.00422561 Jy ! Component: 3400 - total flux cleaned = -0.00420681 Jy ! Component: 3450 - total flux cleaned = -0.00420683 Jy ! Component: 3500 - total flux cleaned = -0.00431878 Jy ! Component: 3550 - total flux cleaned = -0.00426302 Jy ! Component: 3600 - total flux cleaned = -0.00429999 Jy ! Component: 3650 - total flux cleaned = -0.0042447 Jy ! Component: 3700 - total flux cleaned = -0.00426308 Jy ! Component: 3750 - total flux cleaned = -0.0042447 Jy ! Component: 3800 - total flux cleaned = -0.00428092 Jy ! Component: 3850 - total flux cleaned = -0.00420843 Jy ! Component: 3900 - total flux cleaned = -0.00415435 Jy ! Component: 3950 - total flux cleaned = -0.00417233 Jy ! Component: 4000 - total flux cleaned = -0.0041187 Jy ! Component: 4050 - total flux cleaned = -0.00415438 Jy ! Total flux subtracted in 4096 components = -0.00413661 Jy ! Clean residual min=-0.001000 max=0.000934 Jy/beam ! Clean residual mean=-0.000015 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.226263 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 331 components and 0.226263 Jy ![Exited script file: muppet] wmap "J1513-3209_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.378 x 16.58 at -20.24 degrees (North through East) ! Clean map min=-0.0023883 max=0.19582 Jy/beam ! Writing clean map to FITS file: J1513-3209_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.195819 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000325724 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.49902 0.49902 0.998039 1.99608 3.99216 7.98431 15.9686 31.9373 63.8745 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.195 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.378 x 16.58 at -20.24 degrees (North through East) ! Clean map min=-0.0023883 max=0.19582 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1513-3209_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:00:49 2019