! Started logfile: J1513-1012_S_2017_10_21_pus_uvs.log on Sat May 11 21:00:39 2019 obs J1513-1012_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1513-1012_S_2017_10_21_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.918803 visibilities/baseline/integration-bin. ! Found source: J1513-1012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 3440 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1513-1012_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.404136Jy sigma=0.003436 ! Fit after self-cal, rms=0.329466Jy sigma=0.002798 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=13.93 mas, bpa=-17.23 degrees ! Estimated noise=2299.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.553991 Jy ! Component: 100 - total flux cleaned = 0.722069 Jy ! Total flux subtracted in 100 components = 0.722069 Jy ! Clean residual min=-0.046884 max=0.069838 Jy/beam ! Clean residual mean=0.000126 rms=0.015774 Jy/beam ! Combined flux in latest and established models = 0.722069 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.722069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271741Jy sigma=0.002004 ! Fit after self-cal, rms=0.271694Jy sigma=0.002003 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=16.49 mas, bpa=-17.7 degrees ! Estimated noise=1775.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114973 Jy ! Component: 100 - total flux cleaned = 0.179704 Jy ! Component: 150 - total flux cleaned = 0.222392 Jy ! Component: 200 - total flux cleaned = 0.251359 Jy ! Total flux subtracted in 200 components = 0.251359 Jy ! Clean residual min=-0.035731 max=0.039276 Jy/beam ! Clean residual mean=0.000048 rms=0.009693 Jy/beam ! Combined flux in latest and established models = 0.973428 Jy ! Performing phase self-cal ! Adding 75 model components to the UV plane model. ! The established model now contains 88 components and 0.973428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205373Jy sigma=0.001527 ! Fit after self-cal, rms=0.205058Jy sigma=0.001525 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.00 KP 1.13 ! LA 1.01 MK 1.00 NL 1.01 OV 0.94 ! PT 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.05 KP 1.02 ! LA 0.95 MK 1.00 NL 0.98 OV 1.00 ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 2.34 FD 0.89 HN 1.06 KP 1.02 ! LA 0.75 MK 0.99 NL 1.05 OV 0.87 ! PT 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.05 KP 1.00* ! LA 0.76 MK 1.28 NL 1.00* OV 1.00* ! PT 0.98 ! ! ! Fit before self-cal, rms=0.205058Jy sigma=0.001525 ! Fit after self-cal, rms=0.169285Jy sigma=0.001082 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.637 mas, bmaj=18.45 mas, bpa=-17.8 degrees ! Estimated noise=1819.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00840708 Jy ! Component: 100 - total flux cleaned = -0.0112354 Jy ! Component: 150 - total flux cleaned = -0.0137472 Jy ! Component: 200 - total flux cleaned = -0.0160219 Jy ! Total flux subtracted in 200 components = -0.0160219 Jy ! Clean residual min=-0.021458 max=0.024527 Jy/beam ! Clean residual mean=0.000010 rms=0.005764 Jy/beam ! Combined flux in latest and established models = 0.957407 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 106 components and 0.957407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165687Jy sigma=0.001056 ! Fit after self-cal, rms=0.165685Jy sigma=0.001055 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165685Jy sigma=0.001055 ! Fit after self-cal, rms=0.136487Jy sigma=0.000884 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.653 mas, bmaj=18.04 mas, bpa=-17.7 degrees ! Estimated noise=1804.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00629101 Jy ! Component: 100 - total flux cleaned = -0.00929258 Jy ! Component: 150 - total flux cleaned = -0.0113064 Jy ! Component: 200 - total flux cleaned = -0.0131624 Jy ! Total flux subtracted in 200 components = -0.0131624 Jy ! Clean residual min=-0.018567 max=0.021847 Jy/beam ! Clean residual mean=0.000019 rms=0.004427 Jy/beam ! Combined flux in latest and established models = 0.944244 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 120 components and 0.944244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134394Jy sigma=0.000868 ! Fit after self-cal, rms=0.134338Jy sigma=0.000867 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0211422 Jy ! Component: 100 - total flux cleaned = 0.0332289 Jy ! Component: 150 - total flux cleaned = 0.0389529 Jy ! Component: 200 - total flux cleaned = 0.0417073 Jy ! Total flux subtracted in 200 components = 0.0417073 Jy ! Clean residual min=-0.015848 max=0.009405 Jy/beam ! Clean residual mean=-0.000009 rms=0.003127 Jy/beam ! Combined flux in latest and established models = 0.985951 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 163 components and 0.985952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130969Jy sigma=0.000825 ! Fit after self-cal, rms=0.130725Jy sigma=0.000823 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130725Jy sigma=0.000823 ! Fit after self-cal, rms=0.132037Jy sigma=0.000820 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=18.13 mas, bpa=-17.72 degrees ! Estimated noise=1798.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265576 Jy ! Component: 100 - total flux cleaned = 0.00298427 Jy ! Component: 150 - total flux cleaned = 0.00273337 Jy ! Component: 200 - total flux cleaned = 0.00299637 Jy ! Total flux subtracted in 200 components = 0.00299637 Jy ! Clean residual min=-0.014199 max=0.008625 Jy/beam ! Clean residual mean=-0.000010 rms=0.002627 Jy/beam ! Combined flux in latest and established models = 0.988948 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 175 components and 0.988948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130729Jy sigma=0.000807 ! Fit after self-cal, rms=0.130665Jy sigma=0.000807 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189616 Jy ! Component: 100 - total flux cleaned = 0.00189227 Jy ! Component: 150 - total flux cleaned = 0.00188734 Jy ! Component: 200 - total flux cleaned = 0.00168095 Jy ! Total flux subtracted in 200 components = 0.00168095 Jy ! Clean residual min=-0.013580 max=0.008055 Jy/beam ! Clean residual mean=-0.000011 rms=0.002427 Jy/beam ! Combined flux in latest and established models = 0.990629 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 180 components and 0.990629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129833Jy sigma=0.000800 ! Fit after self-cal, rms=0.129799Jy sigma=0.000800 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129799Jy sigma=0.000800 ! Fit after self-cal, rms=0.130393Jy sigma=0.000799 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.396 mas, bmaj=21.21 mas, bpa=-11.56 degrees ! Estimated noise=2103.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0021212 Jy ! Component: 100 - total flux cleaned = -0.00236979 Jy ! Component: 150 - total flux cleaned = -0.00256598 Jy ! Component: 200 - total flux cleaned = -0.00255663 Jy ! Total flux subtracted in 200 components = -0.00255663 Jy ! Clean residual min=-0.013347 max=0.007311 Jy/beam ! Clean residual mean=-0.000020 rms=0.002509 Jy/beam ! Combined flux in latest and established models = 0.988072 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 204 components and 0.988072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129836Jy sigma=0.000794 ! Fit after self-cal, rms=0.129764Jy sigma=0.000794 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137251 Jy ! Component: 100 - total flux cleaned = 0.00137178 Jy ! Component: 150 - total flux cleaned = 0.00108026 Jy ! Component: 200 - total flux cleaned = 0.00080649 Jy ! Total flux subtracted in 200 components = 0.00080649 Jy ! Clean residual min=-0.012337 max=0.007080 Jy/beam ! Clean residual mean=-0.000021 rms=0.002336 Jy/beam ! Combined flux in latest and established models = 0.988879 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 217 components and 0.988879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129493Jy sigma=0.000791 ! Fit after self-cal, rms=0.129443Jy sigma=0.000791 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.655 mas, bmaj=18.16 mas, bpa=-17.73 degrees ! Estimated noise=1794.24 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.655 x 18.16 at -17.73 degrees (North through East) ! Clean map min=-0.011667 max=0.76696 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129443Jy sigma=0.000791 ! Fit after self-cal, rms=0.124132Jy sigma=0.000708 ! Inverting map and beam ! Estimated beam: bmin=3.658 mas, bmaj=18.2 mas, bpa=-17.76 degrees ! Estimated noise=1791.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00412402 Jy ! Component: 100 - total flux cleaned = -0.00466857 Jy ! Component: 150 - total flux cleaned = -0.00500154 Jy ! Component: 200 - total flux cleaned = -0.00515384 Jy ! Total flux subtracted in 200 components = -0.00515384 Jy ! Clean residual min=-0.010623 max=0.006543 Jy/beam ! Clean residual mean=-0.000015 rms=0.001935 Jy/beam ! Combined flux in latest and established models = 0.983725 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 229 components and 0.983725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123478Jy sigma=0.000704 ! Fit after self-cal, rms=0.123461Jy sigma=0.000704 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164497 Jy ! Component: 100 - total flux cleaned = 2.17662e-05 Jy ! Component: 150 - total flux cleaned = -0.000117723 Jy ! Component: 200 - total flux cleaned = -0.000255347 Jy ! Total flux subtracted in 200 components = -0.000255347 Jy ! Clean residual min=-0.010260 max=0.006282 Jy/beam ! Clean residual mean=-0.000015 rms=0.001861 Jy/beam ! Combined flux in latest and established models = 0.98347 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 239 components and 0.983469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123066Jy sigma=0.000701 ! Fit after self-cal, rms=0.123056Jy sigma=0.000701 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123056Jy sigma=0.000701 ! Fit after self-cal, rms=0.123708Jy sigma=0.000700 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=15.85 mas, bpa=-17.51 degrees ! Estimated noise=2454.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.588424 Jy ! Component: 100 - total flux cleaned = 0.724187 Jy ! Component: 150 - total flux cleaned = 0.783918 Jy ! Component: 200 - total flux cleaned = 0.818131 Jy ! Total flux subtracted in 200 components = 0.818131 Jy ! Clean residual min=-0.016106 max=0.026065 Jy/beam ! Clean residual mean=0.000060 rms=0.004552 Jy/beam ! Combined flux in latest and established models = 0.818132 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.818132 Jy ! Inverting map and beam ! Estimated beam: bmin=3.659 mas, bmaj=18.25 mas, bpa=-17.75 degrees ! Estimated noise=1789.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415169 Jy ! Component: 100 - total flux cleaned = 0.0673841 Jy ! Component: 150 - total flux cleaned = 0.0861519 Jy ! Component: 200 - total flux cleaned = 0.100309 Jy ! Total flux subtracted in 200 components = 0.100309 Jy ! Clean residual min=-0.009894 max=0.010212 Jy/beam ! Clean residual mean=0.000031 rms=0.002846 Jy/beam ! Combined flux in latest and established models = 0.918441 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 109 components and 0.918441 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.394 mas, bmaj=21.33 mas, bpa=-11.6 degrees ! Estimated noise=2095.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156866 Jy ! Component: 100 - total flux cleaned = 0.0264321 Jy ! Component: 150 - total flux cleaned = 0.0343427 Jy ! Component: 200 - total flux cleaned = 0.0403297 Jy ! Total flux subtracted in 200 components = 0.0403297 Jy ! Clean residual min=-0.007813 max=0.007150 Jy/beam ! Clean residual mean=0.000002 rms=0.002122 Jy/beam ! Combined flux in latest and established models = 0.95877 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380107 Jy ! Component: 100 - total flux cleaned = 0.00539017 Jy ! Component: 150 - total flux cleaned = 0.00651695 Jy ! Component: 200 - total flux cleaned = 0.00740711 Jy ! Total flux subtracted in 200 components = 0.00740711 Jy ! Clean residual min=-0.007369 max=0.006413 Jy/beam ! Clean residual mean=-0.000007 rms=0.001862 Jy/beam ! Combined flux in latest and established models = 0.966177 Jy ! Adding 160 model components to the UV plane model. ! The established model now contains 261 components and 0.966177 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.659 mas, bmaj=18.25 mas, bpa=-17.75 degrees ! Estimated noise=1789.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223712 Jy ! Component: 100 - total flux cleaned = 0.00310538 Jy ! Component: 150 - total flux cleaned = 0.00348818 Jy ! Component: 200 - total flux cleaned = 0.00408317 Jy ! Total flux subtracted in 200 components = 0.00408317 Jy ! Clean residual min=-0.006871 max=0.005827 Jy/beam ! Clean residual mean=-0.000007 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 0.97026 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 282 components and 0.97026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121567Jy sigma=0.000692 ! Fit after self-cal, rms=0.121374Jy sigma=0.000691 wmodel J1513-1012_S_2017_10_21_pus_map.mod ! Writing 282 model components to file: J1513-1012_S_2017_10_21_pus_map.mod wobs J1513-1012_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1513-1012_S_2017_10_21_pus_uvs.fits wwins J1513-1012_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J1513-1012_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00297708 Jy ! Component: 100 - total flux cleaned = -0.00418204 Jy ! Component: 150 - total flux cleaned = -0.00520081 Jy ! Component: 200 - total flux cleaned = -0.00625428 Jy ! Component: 250 - total flux cleaned = -0.00717198 Jy ! Component: 300 - total flux cleaned = -0.00789096 Jy ! Component: 350 - total flux cleaned = -0.0083526 Jy ! Component: 400 - total flux cleaned = -0.00872488 Jy ! Component: 450 - total flux cleaned = -0.00872379 Jy ! Component: 500 - total flux cleaned = -0.0087256 Jy ! Component: 550 - total flux cleaned = -0.0088643 Jy ! Component: 600 - total flux cleaned = -0.00886292 Jy ! Component: 650 - total flux cleaned = -0.00892895 Jy ! Component: 700 - total flux cleaned = -0.00879936 Jy ! Component: 750 - total flux cleaned = -0.00879987 Jy ! Component: 800 - total flux cleaned = -0.00861293 Jy ! Component: 850 - total flux cleaned = -0.00861443 Jy ! Component: 900 - total flux cleaned = -0.00837324 Jy ! Component: 950 - total flux cleaned = -0.00837381 Jy ! Component: 1000 - total flux cleaned = -0.00825746 Jy ! Component: 1050 - total flux cleaned = -0.00820006 Jy ! Component: 1100 - total flux cleaned = -0.00820137 Jy ! Component: 1150 - total flux cleaned = -0.00842351 Jy ! Component: 1200 - total flux cleaned = -0.00831231 Jy ! Component: 1250 - total flux cleaned = -0.0082037 Jy ! Component: 1300 - total flux cleaned = -0.00804375 Jy ! Component: 1350 - total flux cleaned = -0.0080967 Jy ! Component: 1400 - total flux cleaned = -0.00799267 Jy ! Component: 1450 - total flux cleaned = -0.00804413 Jy ! Component: 1500 - total flux cleaned = -0.00799377 Jy ! Component: 1550 - total flux cleaned = -0.00789483 Jy ! Component: 1600 - total flux cleaned = -0.00784605 Jy ! Component: 1650 - total flux cleaned = -0.00774976 Jy ! Component: 1700 - total flux cleaned = -0.00789492 Jy ! Component: 1750 - total flux cleaned = -0.00794188 Jy ! Component: 1800 - total flux cleaned = -0.00780159 Jy ! Component: 1850 - total flux cleaned = -0.00775575 Jy ! Component: 1900 - total flux cleaned = -0.00784757 Jy ! Component: 1950 - total flux cleaned = -0.00775656 Jy ! Component: 2000 - total flux cleaned = -0.00771159 Jy ! Component: 2050 - total flux cleaned = -0.00775625 Jy ! Component: 2100 - total flux cleaned = -0.00775601 Jy ! Component: 2150 - total flux cleaned = -0.0077554 Jy ! Component: 2200 - total flux cleaned = -0.00766833 Jy ! Component: 2250 - total flux cleaned = -0.00775414 Jy ! Component: 2300 - total flux cleaned = -0.00779671 Jy ! Component: 2350 - total flux cleaned = -0.00775442 Jy ! Component: 2400 - total flux cleaned = -0.00779616 Jy ! Component: 2450 - total flux cleaned = -0.00779599 Jy ! Component: 2500 - total flux cleaned = -0.00775433 Jy ! Component: 2550 - total flux cleaned = -0.00771344 Jy ! Component: 2600 - total flux cleaned = -0.00775399 Jy ! Component: 2650 - total flux cleaned = -0.00775397 Jy ! Component: 2700 - total flux cleaned = -0.00779387 Jy ! Component: 2750 - total flux cleaned = -0.00771459 Jy ! Component: 2800 - total flux cleaned = -0.00775425 Jy ! Component: 2850 - total flux cleaned = -0.00767654 Jy ! Component: 2900 - total flux cleaned = -0.00767665 Jy ! Component: 2950 - total flux cleaned = -0.00767613 Jy ! Component: 3000 - total flux cleaned = -0.00760033 Jy ! Component: 3050 - total flux cleaned = -0.00756302 Jy ! Component: 3100 - total flux cleaned = -0.00760049 Jy ! Component: 3150 - total flux cleaned = -0.00767465 Jy ! Component: 3200 - total flux cleaned = -0.00763712 Jy ! Component: 3250 - total flux cleaned = -0.00763698 Jy ! Component: 3300 - total flux cleaned = -0.00763669 Jy ! Component: 3350 - total flux cleaned = -0.00752817 Jy ! Component: 3400 - total flux cleaned = -0.00742047 Jy ! Component: 3450 - total flux cleaned = -0.00742098 Jy ! Component: 3500 - total flux cleaned = -0.00735029 Jy ! Component: 3550 - total flux cleaned = -0.00731528 Jy ! Component: 3600 - total flux cleaned = -0.00735007 Jy ! Component: 3650 - total flux cleaned = -0.00721124 Jy ! Component: 3700 - total flux cleaned = -0.00717693 Jy ! Component: 3750 - total flux cleaned = -0.00721077 Jy ! Component: 3800 - total flux cleaned = -0.00714244 Jy ! Component: 3850 - total flux cleaned = -0.00700706 Jy ! Component: 3900 - total flux cleaned = -0.00693975 Jy ! Component: 3950 - total flux cleaned = -0.00680594 Jy ! Component: 4000 - total flux cleaned = -0.0067728 Jy ! Component: 4050 - total flux cleaned = -0.00664047 Jy ! Total flux subtracted in 4096 components = -0.00654176 Jy ! Clean residual min=-0.001946 max=0.001786 Jy/beam ! Clean residual mean=0.000006 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.963719 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 535 components and 0.963719 Jy ![Exited script file: muppet] wmap "J1513-1012_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.659 x 18.25 at -17.75 degrees (North through East) ! Clean map min=-0.0054821 max=0.77123 Jy/beam ! Writing clean map to FITS file: J1513-1012_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.771234 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000617784 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.24031 0.24031 0.48062 0.96124 1.92248 3.84496 7.68992 15.3798 30.7597 61.5194 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.771 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.659 x 18.25 at -17.75 degrees (North through East) ! Clean map min=-0.0054821 max=0.77123 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1513-1012_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:00:44 2019