! Started logfile: J1513-1012_S_2017_09_26_pus_uvs.log on Sat May 11 13:02:09 2019 obs J1513-1012_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1513-1012_S_2017_09_26_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.673077 visibilities/baseline/integration-bin. ! Found source: J1513-1012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 1260 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1513-1012_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.254092Jy sigma=0.002027 ! Fit after self-cal, rms=0.222511Jy sigma=0.001801 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=25.32 mas, bpa=-14.51 degrees ! Estimated noise=3357.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.624303 Jy ! Component: 100 - total flux cleaned = 0.777403 Jy ! Total flux subtracted in 100 components = 0.777403 Jy ! Clean residual min=-0.031727 max=0.062909 Jy/beam ! Clean residual mean=-0.000175 rms=0.012028 Jy/beam ! Combined flux in latest and established models = 0.777403 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.777403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154223Jy sigma=0.001245 ! Fit after self-cal, rms=0.154177Jy sigma=0.001245 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.424 mas, bmaj=24.18 mas, bpa=-13.87 degrees ! Estimated noise=2766.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0831424 Jy ! Component: 100 - total flux cleaned = 0.123423 Jy ! Component: 150 - total flux cleaned = 0.148215 Jy ! Component: 200 - total flux cleaned = 0.164374 Jy ! Total flux subtracted in 200 components = 0.164374 Jy ! Clean residual min=-0.021301 max=0.030536 Jy/beam ! Clean residual mean=-0.000056 rms=0.006771 Jy/beam ! Combined flux in latest and established models = 0.941777 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 75 components and 0.941777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104243Jy sigma=0.000823 ! Fit after self-cal, rms=0.103976Jy sigma=0.000821 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 0.98 KP 1.03 ! LA 0.99 MK 1.01 NL 0.95 OV 1.05 ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.98 KP 1.02 ! LA 0.95 MK 1.00 NL 1.11 OV 1.10 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.01 KP 0.99 ! LA 0.96 MK 1.02 NL 1.08 OV 0.99 ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.94 KP 1.00* ! LA 1.00* MK 1.06 NL 1.00* OV 1.00* ! PT 0.97 ! ! ! Fit before self-cal, rms=0.103976Jy sigma=0.000821 ! Fit after self-cal, rms=0.087097Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=24.29 mas, bpa=-13.84 degrees ! Estimated noise=2756.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196242 Jy ! Component: 100 - total flux cleaned = 0.0226129 Jy ! Component: 150 - total flux cleaned = 0.0214583 Jy ! Component: 200 - total flux cleaned = 0.0205875 Jy ! Total flux subtracted in 200 components = 0.0205875 Jy ! Clean residual min=-0.006475 max=0.009757 Jy/beam ! Clean residual mean=-0.000001 rms=0.002105 Jy/beam ! Combined flux in latest and established models = 0.962364 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 115 components and 0.962364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082182Jy sigma=0.000642 ! Fit after self-cal, rms=0.081930Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081930Jy sigma=0.000641 ! Fit after self-cal, rms=0.081269Jy sigma=0.000638 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=24.23 mas, bpa=-13.84 degrees ! Estimated noise=2745.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463499 Jy ! Component: 100 - total flux cleaned = 0.0053644 Jy ! Component: 150 - total flux cleaned = 0.00524685 Jy ! Component: 200 - total flux cleaned = 0.00489875 Jy ! Total flux subtracted in 200 components = 0.00489875 Jy ! Clean residual min=-0.004626 max=0.006556 Jy/beam ! Clean residual mean=0.000001 rms=0.001429 Jy/beam ! Combined flux in latest and established models = 0.967263 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 151 components and 0.967263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080580Jy sigma=0.000633 ! Fit after self-cal, rms=0.080527Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000992449 Jy ! Component: 100 - total flux cleaned = 0.000703121 Jy ! Component: 150 - total flux cleaned = 0.00025649 Jy ! Component: 200 - total flux cleaned = -0.000299714 Jy ! Total flux subtracted in 200 components = -0.000299714 Jy ! Clean residual min=-0.004026 max=0.005685 Jy/beam ! Clean residual mean=0.000002 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.966963 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 178 components and 0.966963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080313Jy sigma=0.000631 ! Fit after self-cal, rms=0.080305Jy sigma=0.000631 ! Inverting map ! Added new window around map position (71.5, 33.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286631 Jy ! Component: 100 - total flux cleaned = 0.00228892 Jy ! Component: 150 - total flux cleaned = 0.00160733 Jy ! Component: 200 - total flux cleaned = 0.00185355 Jy ! Total flux subtracted in 200 components = 0.00185355 Jy ! Clean residual min=-0.003408 max=0.004101 Jy/beam ! Clean residual mean=0.000002 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.968817 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 216 components and 0.968817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079888Jy sigma=0.000628 ! Fit after self-cal, rms=0.079878Jy sigma=0.000628 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079878Jy sigma=0.000628 ! Fit after self-cal, rms=0.079796Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=24.21 mas, bpa=-13.83 degrees ! Estimated noise=2743.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000813067 Jy ! Component: 100 - total flux cleaned = 0.00120232 Jy ! Component: 150 - total flux cleaned = 0.00141154 Jy ! Component: 200 - total flux cleaned = 0.00166733 Jy ! Total flux subtracted in 200 components = 0.00166733 Jy ! Clean residual min=-0.003476 max=0.003291 Jy/beam ! Clean residual mean=0.000001 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.970484 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 249 components and 0.970484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079647Jy sigma=0.000627 ! Fit after self-cal, rms=0.079646Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269441 Jy ! Component: 100 - total flux cleaned = -3.33733e-05 Jy ! Component: 150 - total flux cleaned = -3.22557e-05 Jy ! Component: 200 - total flux cleaned = 0.000172296 Jy ! Total flux subtracted in 200 components = 0.000172296 Jy ! Clean residual min=-0.003461 max=0.003178 Jy/beam ! Clean residual mean=0.000001 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.970656 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 268 components and 0.970656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079565Jy sigma=0.000626 ! Fit after self-cal, rms=0.079566Jy sigma=0.000626 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079566Jy sigma=0.000626 ! Fit after self-cal, rms=0.079516Jy sigma=0.000626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.745 mas, bmaj=24.58 mas, bpa=-6.461 degrees ! Estimated noise=3213.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104376 Jy ! Component: 100 - total flux cleaned = 0.00161353 Jy ! Component: 150 - total flux cleaned = 0.00208612 Jy ! Component: 200 - total flux cleaned = 0.00244316 Jy ! Total flux subtracted in 200 components = 0.00244316 Jy ! Clean residual min=-0.002768 max=0.002520 Jy/beam ! Clean residual mean=-0.000000 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.9731 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 303 components and 0.9731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079477Jy sigma=0.000626 ! Fit after self-cal, rms=0.079478Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00043694 Jy ! Component: 100 - total flux cleaned = 0.000799856 Jy ! Component: 150 - total flux cleaned = 0.00117061 Jy ! Component: 200 - total flux cleaned = 0.00145374 Jy ! Total flux subtracted in 200 components = 0.00145374 Jy ! Clean residual min=-0.002671 max=0.002507 Jy/beam ! Clean residual mean=0.000000 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.974553 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 333 components and 0.974553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079458Jy sigma=0.000626 ! Fit after self-cal, rms=0.079459Jy sigma=0.000626 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=24.2 mas, bpa=-13.83 degrees ! Estimated noise=2742.5 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.462 x 24.2 at -13.83 degrees (North through East) ! Clean map min=-0.0068651 max=0.80462 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079459Jy sigma=0.000626 ! Fit after self-cal, rms=0.073170Jy sigma=0.000571 ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=24.2 mas, bpa=-13.83 degrees ! Estimated noise=2741.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.16239e-05 Jy ! Component: 100 - total flux cleaned = 0.000335216 Jy ! Component: 150 - total flux cleaned = 0.000420908 Jy ! Component: 200 - total flux cleaned = 0.000460799 Jy ! Total flux subtracted in 200 components = 0.000460799 Jy ! Clean residual min=-0.003180 max=0.002748 Jy/beam ! Clean residual mean=0.000001 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.975014 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 368 components and 0.975014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073108Jy sigma=0.000571 ! Fit after self-cal, rms=0.073109Jy sigma=0.000571 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.82847e-05 Jy ! Component: 100 - total flux cleaned = 0.000245219 Jy ! Component: 150 - total flux cleaned = 0.000432335 Jy ! Component: 200 - total flux cleaned = 0.000431011 Jy ! Total flux subtracted in 200 components = 0.000431011 Jy ! Clean residual min=-0.003130 max=0.002692 Jy/beam ! Clean residual mean=0.000002 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.975445 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 387 components and 0.975445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073067Jy sigma=0.000570 ! Fit after self-cal, rms=0.073068Jy sigma=0.000570 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073068Jy sigma=0.000570 ! Fit after self-cal, rms=0.073064Jy sigma=0.000570 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=25.32 mas, bpa=-14.48 degrees ! Estimated noise=3353.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.619712 Jy ! Component: 100 - total flux cleaned = 0.769149 Jy ! Component: 150 - total flux cleaned = 0.832395 Jy ! Component: 200 - total flux cleaned = 0.866831 Jy ! Total flux subtracted in 200 components = 0.866831 Jy ! Clean residual min=-0.016375 max=0.021681 Jy/beam ! Clean residual mean=-0.000066 rms=0.005309 Jy/beam ! Combined flux in latest and established models = 0.866831 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.866831 Jy ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=24.2 mas, bpa=-13.83 degrees ! Estimated noise=2741.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0301492 Jy ! Component: 100 - total flux cleaned = 0.0507977 Jy ! Component: 150 - total flux cleaned = 0.0661312 Jy ! Component: 200 - total flux cleaned = 0.0773082 Jy ! Total flux subtracted in 200 components = 0.0773082 Jy ! Clean residual min=-0.009394 max=0.010308 Jy/beam ! Clean residual mean=-0.000027 rms=0.002690 Jy/beam ! Combined flux in latest and established models = 0.944139 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 104 components and 0.944139 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.743 mas, bmaj=24.58 mas, bpa=-6.455 degrees ! Estimated noise=3212.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127254 Jy ! Component: 100 - total flux cleaned = 0.0211806 Jy ! Component: 150 - total flux cleaned = 0.0254495 Jy ! Component: 200 - total flux cleaned = 0.027997 Jy ! Total flux subtracted in 200 components = 0.027997 Jy ! Clean residual min=-0.005444 max=0.005943 Jy/beam ! Clean residual mean=-0.000013 rms=0.001646 Jy/beam ! Combined flux in latest and established models = 0.972136 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171264 Jy ! Component: 100 - total flux cleaned = 0.00273863 Jy ! Component: 150 - total flux cleaned = 0.00397466 Jy ! Component: 200 - total flux cleaned = 0.0050884 Jy ! Total flux subtracted in 200 components = 0.0050884 Jy ! Clean residual min=-0.004296 max=0.004028 Jy/beam ! Clean residual mean=-0.000006 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.977225 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 197 components and 0.977224 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=24.2 mas, bpa=-13.83 degrees ! Estimated noise=2741.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000881396 Jy ! Component: 100 - total flux cleaned = -0.000342834 Jy ! Component: 150 - total flux cleaned = 7.18314e-05 Jy ! Component: 200 - total flux cleaned = 0.000674706 Jy ! Total flux subtracted in 200 components = 0.000674706 Jy ! Clean residual min=-0.004496 max=0.003716 Jy/beam ! Clean residual mean=0.000001 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.977899 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 224 components and 0.977899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073674Jy sigma=0.000574 ! Fit after self-cal, rms=0.073626Jy sigma=0.000574 wmodel J1513-1012_S_2017_09_26_pus_map.mod ! Writing 224 model components to file: J1513-1012_S_2017_09_26_pus_map.mod wobs J1513-1012_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1513-1012_S_2017_09_26_pus_uvs.fits wwins J1513-1012_S_2017_09_26_pus_map.win ! wwins: Wrote 3 windows to J1513-1012_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118873 Jy ! Component: 100 - total flux cleaned = -0.00144119 Jy ! Component: 150 - total flux cleaned = -0.000976714 Jy ! Component: 200 - total flux cleaned = -0.000649163 Jy ! Component: 250 - total flux cleaned = -0.000289542 Jy ! Component: 300 - total flux cleaned = -0.000142786 Jy ! Component: 350 - total flux cleaned = -0.00032428 Jy ! Component: 400 - total flux cleaned = -0.000545886 Jy ! Component: 450 - total flux cleaned = -0.000802601 Jy ! Component: 500 - total flux cleaned = -0.00109181 Jy ! Component: 550 - total flux cleaned = -0.00137378 Jy ! Component: 600 - total flux cleaned = -0.00180516 Jy ! Component: 650 - total flux cleaned = -0.00218574 Jy ! Component: 700 - total flux cleaned = -0.00244532 Jy ! Component: 750 - total flux cleaned = -0.00259039 Jy ! Component: 800 - total flux cleaned = -0.00283659 Jy ! Component: 850 - total flux cleaned = -0.0030083 Jy ! Component: 900 - total flux cleaned = -0.00327652 Jy ! Component: 950 - total flux cleaned = -0.00344073 Jy ! Component: 1000 - total flux cleaned = -0.00369817 Jy ! Component: 1050 - total flux cleaned = -0.00385545 Jy ! Component: 1100 - total flux cleaned = -0.00410252 Jy ! Component: 1150 - total flux cleaned = -0.00428454 Jy ! Component: 1200 - total flux cleaned = -0.00455145 Jy ! Component: 1250 - total flux cleaned = -0.00472565 Jy ! Component: 1300 - total flux cleaned = -0.00489691 Jy ! Component: 1350 - total flux cleaned = -0.00506539 Jy ! Component: 1400 - total flux cleaned = -0.00509293 Jy ! Component: 1450 - total flux cleaned = -0.00517532 Jy ! Component: 1500 - total flux cleaned = -0.0053103 Jy ! Component: 1550 - total flux cleaned = -0.0053903 Jy ! Component: 1600 - total flux cleaned = -0.00549596 Jy ! Component: 1650 - total flux cleaned = -0.00562711 Jy ! Component: 1700 - total flux cleaned = -0.00567909 Jy ! Component: 1750 - total flux cleaned = -0.00575672 Jy ! Component: 1800 - total flux cleaned = -0.00583367 Jy ! Component: 1850 - total flux cleaned = -0.0059096 Jy ! Component: 1900 - total flux cleaned = -0.00595979 Jy ! Component: 1950 - total flux cleaned = -0.00598487 Jy ! Component: 2000 - total flux cleaned = -0.00600966 Jy ! Component: 2050 - total flux cleaned = -0.00600943 Jy ! Component: 2100 - total flux cleaned = -0.0059848 Jy ! Component: 2150 - total flux cleaned = -0.00603445 Jy ! Component: 2200 - total flux cleaned = -0.00598488 Jy ! Component: 2250 - total flux cleaned = -0.0060342 Jy ! Component: 2300 - total flux cleaned = -0.00613312 Jy ! Component: 2350 - total flux cleaned = -0.00613301 Jy ! Component: 2400 - total flux cleaned = -0.00620734 Jy ! Component: 2450 - total flux cleaned = -0.00620736 Jy ! Component: 2500 - total flux cleaned = -0.00628195 Jy ! Component: 2550 - total flux cleaned = -0.00628199 Jy ! Component: 2600 - total flux cleaned = -0.00633195 Jy ! Component: 2650 - total flux cleaned = -0.00635694 Jy ! Component: 2700 - total flux cleaned = -0.00640691 Jy ! Component: 2750 - total flux cleaned = -0.00640687 Jy ! Component: 2800 - total flux cleaned = -0.00645734 Jy ! Component: 2850 - total flux cleaned = -0.00643201 Jy ! Component: 2900 - total flux cleaned = -0.0064318 Jy ! Component: 2950 - total flux cleaned = -0.00638067 Jy ! Component: 3000 - total flux cleaned = -0.00630356 Jy ! Component: 3050 - total flux cleaned = -0.00625157 Jy ! Component: 3100 - total flux cleaned = -0.00619951 Jy ! Component: 3150 - total flux cleaned = -0.00612083 Jy ! Component: 3200 - total flux cleaned = -0.00604153 Jy ! Component: 3250 - total flux cleaned = -0.00598825 Jy ! Component: 3300 - total flux cleaned = -0.00593488 Jy ! Component: 3350 - total flux cleaned = -0.00588089 Jy ! Component: 3400 - total flux cleaned = -0.00577247 Jy ! Component: 3450 - total flux cleaned = -0.00569012 Jy ! Component: 3500 - total flux cleaned = -0.0056072 Jy ! Component: 3550 - total flux cleaned = -0.00549581 Jy ! Component: 3600 - total flux cleaned = -0.00543919 Jy ! Component: 3650 - total flux cleaned = -0.00535406 Jy ! Component: 3700 - total flux cleaned = -0.00526793 Jy ! Component: 3750 - total flux cleaned = -0.00518115 Jy ! Component: 3800 - total flux cleaned = -0.00509336 Jy ! Component: 3850 - total flux cleaned = -0.00503392 Jy ! Component: 3900 - total flux cleaned = -0.00494405 Jy ! Component: 3950 - total flux cleaned = -0.00491383 Jy ! Component: 4000 - total flux cleaned = -0.00485259 Jy ! Component: 4050 - total flux cleaned = -0.00475974 Jy ! Total flux subtracted in 4096 components = -0.00466527 Jy ! Clean residual min=-0.001756 max=0.001664 Jy/beam ! Clean residual mean=0.000000 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.973234 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 482 components and 0.973234 Jy ![Exited script file: muppet] wmap "J1513-1012_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.462 x 24.2 at -13.83 degrees (North through East) ! Clean map min=-0.0068221 max=0.81147 Jy/beam ! Writing clean map to FITS file: J1513-1012_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.811471 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000596611 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.220567 0.220567 0.441133 0.882267 1.76453 3.52907 7.05813 14.1163 28.2325 56.4651 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.811 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.462 x 24.2 at -13.83 degrees (North through East) ! Clean map min=-0.0068221 max=0.81147 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1513-1012_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:02:14 2019