! Started logfile: J1513-1012_S_2017_07_16_pus_uvs.log on Thu May 9 11:12:18 2019 obs J1513-1012_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1513-1012_S_2017_07_16_pus_uva.fits ! AN table 1: 22 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.587879 visibilities/baseline/integration-bin. ! Found source: J1513-1012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 2328 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1513-1012_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.385691Jy sigma=0.002881 ! Fit after self-cal, rms=0.335427Jy sigma=0.002446 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.732 mas, bmaj=6.541 mas, bpa=-0.5628 degrees ! Estimated noise=2765.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.554493 Jy ! Component: 100 - total flux cleaned = 0.678355 Jy ! Total flux subtracted in 100 components = 0.678355 Jy ! Clean residual min=-0.034046 max=0.068928 Jy/beam ! Clean residual mean=0.000105 rms=0.012162 Jy/beam ! Combined flux in latest and established models = 0.678355 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.678355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194368Jy sigma=0.001452 ! Fit after self-cal, rms=0.194339Jy sigma=0.001451 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=7.245 mas, bpa=-0.9329 degrees ! Estimated noise=2318.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0686669 Jy ! Component: 100 - total flux cleaned = 0.103179 Jy ! Component: 150 - total flux cleaned = 0.121951 Jy ! Component: 200 - total flux cleaned = 0.132248 Jy ! Total flux subtracted in 200 components = 0.132248 Jy ! Clean residual min=-0.026917 max=0.044050 Jy/beam ! Clean residual mean=0.000082 rms=0.009634 Jy/beam ! Combined flux in latest and established models = 0.810604 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 30 components and 0.810604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175260Jy sigma=0.001207 ! Fit after self-cal, rms=0.174914Jy sigma=0.001205 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.74 FD 1.00* HN 0.98 KP 1.02 ! LA 0.99 MK 1.03 NL 0.92 OV 0.98 ! PT 0.97 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.01 KP 0.98 ! LA 0.93 MK 0.99 NL 1.08 OV 1.03 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 0.95 ! LA 0.95 MK 1.04 NL 1.02 OV 0.94 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.174914Jy sigma=0.001205 ! Fit after self-cal, rms=0.169612Jy sigma=0.000969 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=7.342 mas, bpa=0.2873 degrees ! Estimated noise=2325.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298111 Jy ! Component: 100 - total flux cleaned = 0.00214047 Jy ! Component: 150 - total flux cleaned = 0.00192143 Jy ! Component: 200 - total flux cleaned = 0.00172872 Jy ! Total flux subtracted in 200 components = 0.00172872 Jy ! Clean residual min=-0.027209 max=0.030184 Jy/beam ! Clean residual mean=0.000039 rms=0.007054 Jy/beam ! Combined flux in latest and established models = 0.812332 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.812332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169015Jy sigma=0.000959 ! Fit after self-cal, rms=0.168975Jy sigma=0.000958 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168975Jy sigma=0.000958 ! Fit after self-cal, rms=0.124450Jy sigma=0.000765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=7.369 mas, bpa=0.2156 degrees ! Estimated noise=2324.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319003 Jy ! Component: 100 - total flux cleaned = 0.00316274 Jy ! Component: 150 - total flux cleaned = 0.00383931 Jy ! Component: 200 - total flux cleaned = 0.00425582 Jy ! Total flux subtracted in 200 components = 0.00425582 Jy ! Clean residual min=-0.013114 max=0.024824 Jy/beam ! Clean residual mean=0.000021 rms=0.004390 Jy/beam ! Combined flux in latest and established models = 0.816588 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.816588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123406Jy sigma=0.000754 ! Fit after self-cal, rms=0.123358Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0228626 Jy ! Component: 100 - total flux cleaned = 0.0297145 Jy ! Component: 150 - total flux cleaned = 0.0309641 Jy ! Component: 200 - total flux cleaned = 0.0312313 Jy ! Total flux subtracted in 200 components = 0.0312313 Jy ! Clean residual min=-0.010436 max=0.015699 Jy/beam ! Clean residual mean=0.000012 rms=0.003067 Jy/beam ! Combined flux in latest and established models = 0.84782 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 63 components and 0.84782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118706Jy sigma=0.000707 ! Fit after self-cal, rms=0.118484Jy sigma=0.000704 ! Inverting map ! Added new window around map position (19.5, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141979 Jy ! Component: 100 - total flux cleaned = 0.021829 Jy ! Component: 150 - total flux cleaned = 0.0249757 Jy ! Component: 200 - total flux cleaned = 0.0268781 Jy ! Total flux subtracted in 200 components = 0.0268781 Jy ! Clean residual min=-0.009014 max=0.007640 Jy/beam ! Clean residual mean=0.000005 rms=0.002091 Jy/beam ! Combined flux in latest and established models = 0.874698 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 86 components and 0.874698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116746Jy sigma=0.000682 ! Fit after self-cal, rms=0.116674Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116674Jy sigma=0.000681 ! Fit after self-cal, rms=0.116820Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=7.354 mas, bpa=0.1713 degrees ! Estimated noise=2316.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00550589 Jy ! Component: 100 - total flux cleaned = 0.00702113 Jy ! Component: 150 - total flux cleaned = 0.00836769 Jy ! Component: 200 - total flux cleaned = 0.00931836 Jy ! Total flux subtracted in 200 components = 0.00931836 Jy ! Clean residual min=-0.007578 max=0.006109 Jy/beam ! Clean residual mean=0.000002 rms=0.001741 Jy/beam ! Combined flux in latest and established models = 0.884016 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 100 components and 0.884016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116325Jy sigma=0.000674 ! Fit after self-cal, rms=0.116305Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221879 Jy ! Component: 100 - total flux cleaned = 0.00281681 Jy ! Component: 150 - total flux cleaned = 0.00337227 Jy ! Component: 200 - total flux cleaned = 0.00368327 Jy ! Total flux subtracted in 200 components = 0.00368327 Jy ! Clean residual min=-0.007239 max=0.005539 Jy/beam ! Clean residual mean=0.000001 rms=0.001618 Jy/beam ! Combined flux in latest and established models = 0.887699 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 108 components and 0.887699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116075Jy sigma=0.000672 ! Fit after self-cal, rms=0.116068Jy sigma=0.000672 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116068Jy sigma=0.000672 ! Fit after self-cal, rms=0.116266Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.852 mas, bmaj=14.5 mas, bpa=-2.128 degrees ! Estimated noise=3071.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00574966 Jy ! Component: 100 - total flux cleaned = 0.00857875 Jy ! Component: 150 - total flux cleaned = 0.00929895 Jy ! Component: 200 - total flux cleaned = 0.00973072 Jy ! Total flux subtracted in 200 components = 0.00973072 Jy ! Clean residual min=-0.006346 max=0.006903 Jy/beam ! Clean residual mean=-0.000002 rms=0.001690 Jy/beam ! Combined flux in latest and established models = 0.89743 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 119 components and 0.89743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116168Jy sigma=0.000671 ! Fit after self-cal, rms=0.116154Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158984 Jy ! Component: 100 - total flux cleaned = 0.00173403 Jy ! Component: 150 - total flux cleaned = 0.00199334 Jy ! Component: 200 - total flux cleaned = 0.00222757 Jy ! Total flux subtracted in 200 components = 0.00222757 Jy ! Clean residual min=-0.005976 max=0.006149 Jy/beam ! Clean residual mean=-0.000004 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 0.899658 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 130 components and 0.899658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116158Jy sigma=0.000671 ! Fit after self-cal, rms=0.116155Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=7.348 mas, bpa=0.1218 degrees ! Estimated noise=2316.45 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.069 x 7.348 at 0.1218 degrees (North through East) ! Clean map min=-0.0090125 max=0.71879 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116155Jy sigma=0.000671 ! Fit after self-cal, rms=0.110684Jy sigma=0.000599 ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=7.344 mas, bpa=0.1625 degrees ! Estimated noise=2314.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000555531 Jy ! Component: 100 - total flux cleaned = -0.000536446 Jy ! Component: 150 - total flux cleaned = -0.000921936 Jy ! Component: 200 - total flux cleaned = -0.00100477 Jy ! Total flux subtracted in 200 components = -0.00100477 Jy ! Clean residual min=-0.007031 max=0.005480 Jy/beam ! Clean residual mean=0.000001 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.898653 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 144 components and 0.898653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110484Jy sigma=0.000597 ! Fit after self-cal, rms=0.110474Jy sigma=0.000597 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110973 Jy ! Component: 100 - total flux cleaned = 3.28882e-05 Jy ! Component: 150 - total flux cleaned = -0.00018663 Jy ! Component: 200 - total flux cleaned = -0.000186547 Jy ! Total flux subtracted in 200 components = -0.000186547 Jy ! Clean residual min=-0.006743 max=0.005331 Jy/beam ! Clean residual mean=0.000001 rms=0.001353 Jy/beam ! Combined flux in latest and established models = 0.898466 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 157 components and 0.898466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110362Jy sigma=0.000595 ! Fit after self-cal, rms=0.110356Jy sigma=0.000595 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110356Jy sigma=0.000595 ! Fit after self-cal, rms=0.110447Jy sigma=0.000595 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.724 mas, bmaj=6.573 mas, bpa=0.4532 degrees ! Estimated noise=2795.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.555946 Jy ! Component: 100 - total flux cleaned = 0.685114 Jy ! Component: 150 - total flux cleaned = 0.742899 Jy ! Component: 200 - total flux cleaned = 0.778629 Jy ! Total flux subtracted in 200 components = 0.778629 Jy ! Clean residual min=-0.013173 max=0.018734 Jy/beam ! Clean residual mean=0.000038 rms=0.003858 Jy/beam ! Combined flux in latest and established models = 0.778629 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.778629 Jy ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=7.344 mas, bpa=0.1228 degrees ! Estimated noise=2316 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0286148 Jy ! Component: 100 - total flux cleaned = 0.0459896 Jy ! Component: 150 - total flux cleaned = 0.0591723 Jy ! Component: 200 - total flux cleaned = 0.0697958 Jy ! Total flux subtracted in 200 components = 0.0697958 Jy ! Clean residual min=-0.009565 max=0.009796 Jy/beam ! Clean residual mean=0.000024 rms=0.002652 Jy/beam ! Combined flux in latest and established models = 0.848425 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 69 components and 0.848425 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.846 mas, bmaj=14.48 mas, bpa=-2.109 degrees ! Estimated noise=3074.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171306 Jy ! Component: 100 - total flux cleaned = 0.0285078 Jy ! Component: 150 - total flux cleaned = 0.0367085 Jy ! Component: 200 - total flux cleaned = 0.0428658 Jy ! Total flux subtracted in 200 components = 0.0428658 Jy ! Clean residual min=-0.007050 max=0.006461 Jy/beam ! Clean residual mean=0.000009 rms=0.002037 Jy/beam ! Combined flux in latest and established models = 0.891291 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00472597 Jy ! Component: 100 - total flux cleaned = 0.00714632 Jy ! Component: 150 - total flux cleaned = 0.00878576 Jy ! Component: 200 - total flux cleaned = 0.0100816 Jy ! Total flux subtracted in 200 components = 0.0100816 Jy ! Clean residual min=-0.005783 max=0.005885 Jy/beam ! Clean residual mean=-0.000001 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.901372 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 146 components and 0.901372 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=7.344 mas, bpa=0.1228 degrees ! Estimated noise=2316 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134413 Jy ! Component: 100 - total flux cleaned = 0.000612717 Jy ! Component: 150 - total flux cleaned = 0.000753243 Jy ! Component: 200 - total flux cleaned = 0.00074818 Jy ! Total flux subtracted in 200 components = 0.00074818 Jy ! Clean residual min=-0.006104 max=0.004879 Jy/beam ! Clean residual mean=0.000000 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 0.902121 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 163 components and 0.902121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110537Jy sigma=0.000595 ! Fit after self-cal, rms=0.110388Jy sigma=0.000595 wmodel J1513-1012_S_2017_07_16_pus_map.mod ! Writing 163 model components to file: J1513-1012_S_2017_07_16_pus_map.mod wobs J1513-1012_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1513-1012_S_2017_07_16_pus_uvs.fits wwins J1513-1012_S_2017_07_16_pus_map.win ! wwins: Wrote 4 windows to J1513-1012_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0027387 Jy ! Component: 100 - total flux cleaned = -0.00457585 Jy ! Component: 150 - total flux cleaned = -0.00590063 Jy ! Component: 200 - total flux cleaned = -0.00705899 Jy ! Component: 250 - total flux cleaned = -0.00791541 Jy ! Component: 300 - total flux cleaned = -0.00887856 Jy ! Component: 350 - total flux cleaned = -0.0097299 Jy ! Component: 400 - total flux cleaned = -0.0103433 Jy ! Component: 450 - total flux cleaned = -0.0109347 Jy ! Component: 500 - total flux cleaned = -0.0115675 Jy ! Component: 550 - total flux cleaned = -0.0118748 Jy ! Component: 600 - total flux cleaned = -0.0121729 Jy ! Component: 650 - total flux cleaned = -0.0124614 Jy ! Component: 700 - total flux cleaned = -0.0126844 Jy ! Component: 750 - total flux cleaned = -0.012685 Jy ! Component: 800 - total flux cleaned = -0.0125796 Jy ! Component: 850 - total flux cleaned = -0.0124269 Jy ! Component: 900 - total flux cleaned = -0.0123769 Jy ! Component: 950 - total flux cleaned = -0.0121811 Jy ! Component: 1000 - total flux cleaned = -0.0121329 Jy ! Component: 1050 - total flux cleaned = -0.0120863 Jy ! Component: 1100 - total flux cleaned = -0.0119482 Jy ! Component: 1150 - total flux cleaned = -0.0118129 Jy ! Component: 1200 - total flux cleaned = -0.0117686 Jy ! Component: 1250 - total flux cleaned = -0.0115959 Jy ! Component: 1300 - total flux cleaned = -0.011426 Jy ! Component: 1350 - total flux cleaned = -0.0113011 Jy ! Component: 1400 - total flux cleaned = -0.0111368 Jy ! Component: 1450 - total flux cleaned = -0.0109759 Jy ! Component: 1500 - total flux cleaned = -0.0108179 Jy ! Component: 1550 - total flux cleaned = -0.0107392 Jy ! Component: 1600 - total flux cleaned = -0.0105847 Jy ! Component: 1650 - total flux cleaned = -0.0104714 Jy ! Component: 1700 - total flux cleaned = -0.0103592 Jy ! Component: 1750 - total flux cleaned = -0.0102118 Jy ! Component: 1800 - total flux cleaned = -0.0101759 Jy ! Component: 1850 - total flux cleaned = -0.0101402 Jy ! Component: 1900 - total flux cleaned = -0.0101398 Jy ! Component: 1950 - total flux cleaned = -0.0101047 Jy ! Component: 2000 - total flux cleaned = -0.0100701 Jy ! Component: 2050 - total flux cleaned = -0.0101728 Jy ! Component: 2100 - total flux cleaned = -0.0100704 Jy ! Component: 2150 - total flux cleaned = -0.0100706 Jy ! Component: 2200 - total flux cleaned = -0.010104 Jy ! Component: 2250 - total flux cleaned = -0.0101036 Jy ! Component: 2300 - total flux cleaned = -0.00997354 Jy ! Component: 2350 - total flux cleaned = -0.0100063 Jy ! Component: 2400 - total flux cleaned = -0.00991064 Jy ! Component: 2450 - total flux cleaned = -0.00981587 Jy ! Component: 2500 - total flux cleaned = -0.00972193 Jy ! Component: 2550 - total flux cleaned = -0.00966008 Jy ! Component: 2600 - total flux cleaned = -0.00956767 Jy ! Component: 2650 - total flux cleaned = -0.00947596 Jy ! Component: 2700 - total flux cleaned = -0.00935468 Jy ! Component: 2750 - total flux cleaned = -0.00932497 Jy ! Component: 2800 - total flux cleaned = -0.00923502 Jy ! Component: 2850 - total flux cleaned = -0.00902623 Jy ! Component: 2900 - total flux cleaned = -0.00884888 Jy ! Component: 2950 - total flux cleaned = -0.00879031 Jy ! Component: 3000 - total flux cleaned = -0.00873177 Jy ! Component: 3050 - total flux cleaned = -0.00867333 Jy ! Component: 3100 - total flux cleaned = -0.0084422 Jy ! Component: 3150 - total flux cleaned = -0.00832731 Jy ! Component: 3200 - total flux cleaned = -0.00824184 Jy ! Component: 3250 - total flux cleaned = -0.00812825 Jy ! Component: 3300 - total flux cleaned = -0.00795889 Jy ! Component: 3350 - total flux cleaned = -0.0078747 Jy ! Component: 3400 - total flux cleaned = -0.00770702 Jy ! Component: 3450 - total flux cleaned = -0.00759577 Jy ! Component: 3500 - total flux cleaned = -0.00740178 Jy ! Component: 3550 - total flux cleaned = -0.00726377 Jy ! Component: 3600 - total flux cleaned = -0.00712633 Jy ! Component: 3650 - total flux cleaned = -0.00704421 Jy ! Component: 3700 - total flux cleaned = -0.00690772 Jy ! Component: 3750 - total flux cleaned = -0.00679886 Jy ! Component: 3800 - total flux cleaned = -0.00669034 Jy ! Component: 3850 - total flux cleaned = -0.00660918 Jy ! Component: 3900 - total flux cleaned = -0.00655532 Jy ! Component: 3950 - total flux cleaned = -0.00642052 Jy ! Component: 4000 - total flux cleaned = -0.00633996 Jy ! Component: 4050 - total flux cleaned = -0.00628634 Jy ! Total flux subtracted in 4096 components = -0.00615218 Jy ! Clean residual min=-0.001660 max=0.001632 Jy/beam ! Clean residual mean=-0.000005 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.895968 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 403 components and 0.895968 Jy ![Exited script file: muppet] wmap "J1513-1012_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.067 x 7.344 at 0.1228 degrees (North through East) ! Clean map min=-0.0046246 max=0.72349 Jy/beam ! Writing clean map to FITS file: J1513-1012_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.72349 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000438539 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.181843 0.181843 0.363687 0.727373 1.45475 2.90949 5.81899 11.638 23.2759 46.5519 93.1038 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.723 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.067 x 7.344 at 0.1228 degrees (North through East) ! Clean map min=-0.0046246 max=0.72349 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1513-1012_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:12:22 2019