! Started logfile: J1513-1012_S_2017_06_10_pus_uvs.log on Mon May 6 14:56:56 2019 obs J1513-1012_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1513-1012_S_2017_06_10_pus_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.351724 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1513-1012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 1836 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1513-1012_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 139 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 206 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 206 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 256 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.380657Jy sigma=0.003432 ! Fit after self-cal, rms=0.295294Jy sigma=0.002591 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.716 mas, bmaj=7.02 mas, bpa=-1.224 degrees ! Estimated noise=2767.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.583233 Jy ! Component: 100 - total flux cleaned = 0.727108 Jy ! Total flux subtracted in 100 components = 0.727108 Jy ! Clean residual min=-0.037969 max=0.060224 Jy/beam ! Clean residual mean=-0.000120 rms=0.011679 Jy/beam ! Combined flux in latest and established models = 0.727108 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.727108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170250Jy sigma=0.001479 ! Fit after self-cal, rms=0.170216Jy sigma=0.001478 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.205 mas, bmaj=7.874 mas, bpa=-1.959 degrees ! Estimated noise=2361.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0841751 Jy ! Component: 100 - total flux cleaned = 0.126007 Jy ! Component: 150 - total flux cleaned = 0.146189 Jy ! Component: 200 - total flux cleaned = 0.149667 Jy ! Total flux subtracted in 200 components = 0.149667 Jy ! Clean residual min=-0.027369 max=0.036742 Jy/beam ! Clean residual mean=-0.000072 rms=0.008071 Jy/beam ! Combined flux in latest and established models = 0.876776 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 33 components and 0.876776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126136Jy sigma=0.001075 ! Fit after self-cal, rms=0.125878Jy sigma=0.001073 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.98 HN 1.01 KP 1.02 ! LA 0.99 MK 0.95 NL 0.93 OV 1.04 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.02 KP 0.98 ! LA 0.94 MK 0.95 NL 1.07 OV 1.07 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.03 KP 0.98 ! LA 0.95 MK 0.96 NL 1.13 OV 0.98 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00 KP 1.00* ! LA 1.00* MK 0.89 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.125878Jy sigma=0.001073 ! Fit after self-cal, rms=0.092700Jy sigma=0.000807 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=8.212 mas, bpa=-0.5146 degrees ! Estimated noise=2371.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0255787 Jy ! Component: 100 - total flux cleaned = 0.0288424 Jy ! Component: 150 - total flux cleaned = 0.0293065 Jy ! Component: 200 - total flux cleaned = 0.0283569 Jy ! Total flux subtracted in 200 components = 0.0283569 Jy ! Clean residual min=-0.011780 max=0.015094 Jy/beam ! Clean residual mean=0.000010 rms=0.003338 Jy/beam ! Combined flux in latest and established models = 0.905133 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 55 components and 0.905133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084459Jy sigma=0.000735 ! Fit after self-cal, rms=0.083920Jy sigma=0.000731 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083920Jy sigma=0.000731 ! Fit after self-cal, rms=0.082670Jy sigma=0.000727 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=8.183 mas, bpa=-0.4051 degrees ! Estimated noise=2360.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0054609 Jy ! Component: 100 - total flux cleaned = 0.00630283 Jy ! Component: 150 - total flux cleaned = 0.00584553 Jy ! Component: 200 - total flux cleaned = 0.00564568 Jy ! Total flux subtracted in 200 components = 0.00564568 Jy ! Clean residual min=-0.010279 max=0.013588 Jy/beam ! Clean residual mean=0.000001 rms=0.002861 Jy/beam ! Combined flux in latest and established models = 0.910779 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.910779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080914Jy sigma=0.000713 ! Fit after self-cal, rms=0.080737Jy sigma=0.000712 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013265 Jy ! Component: 100 - total flux cleaned = 0.0169321 Jy ! Component: 150 - total flux cleaned = 0.0185 Jy ! Component: 200 - total flux cleaned = 0.020384 Jy ! Total flux subtracted in 200 components = 0.020384 Jy ! Clean residual min=-0.008408 max=0.008481 Jy/beam ! Clean residual mean=0.000008 rms=0.002088 Jy/beam ! Combined flux in latest and established models = 0.931163 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 85 components and 0.931163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078114Jy sigma=0.000691 ! Fit after self-cal, rms=0.078015Jy sigma=0.000690 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078015Jy sigma=0.000690 ! Fit after self-cal, rms=0.077418Jy sigma=0.000688 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=8.168 mas, bpa=-0.3255 degrees ! Estimated noise=2353.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00506179 Jy ! Component: 100 - total flux cleaned = 0.00713457 Jy ! Component: 150 - total flux cleaned = 0.00773465 Jy ! Component: 200 - total flux cleaned = 0.00787252 Jy ! Total flux subtracted in 200 components = 0.00787252 Jy ! Clean residual min=-0.007540 max=0.008029 Jy/beam ! Clean residual mean=0.000005 rms=0.001797 Jy/beam ! Combined flux in latest and established models = 0.939035 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 96 components and 0.939035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076679Jy sigma=0.000682 ! Fit after self-cal, rms=0.076631Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-62.5, -30). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00720424 Jy ! Component: 100 - total flux cleaned = 0.0102137 Jy ! Component: 150 - total flux cleaned = 0.0119474 Jy ! Component: 200 - total flux cleaned = 0.0132708 Jy ! Total flux subtracted in 200 components = 0.0132708 Jy ! Clean residual min=-0.006495 max=0.005675 Jy/beam ! Clean residual mean=0.000007 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 0.952306 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 116 components and 0.952306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075728Jy sigma=0.000674 ! Fit after self-cal, rms=0.075707Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075707Jy sigma=0.000674 ! Fit after self-cal, rms=0.075620Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.898 mas, bmaj=16.25 mas, bpa=6.141 degrees ! Estimated noise=2963.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345664 Jy ! Component: 100 - total flux cleaned = 0.00479331 Jy ! Component: 150 - total flux cleaned = 0.00532565 Jy ! Component: 200 - total flux cleaned = 0.00552523 Jy ! Total flux subtracted in 200 components = 0.00552523 Jy ! Clean residual min=-0.005100 max=0.005282 Jy/beam ! Clean residual mean=0.000014 rms=0.001567 Jy/beam ! Combined flux in latest and established models = 0.957831 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 139 components and 0.957831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075443Jy sigma=0.000673 ! Fit after self-cal, rms=0.075422Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190432 Jy ! Component: 100 - total flux cleaned = 0.000734385 Jy ! Component: 150 - total flux cleaned = 0.000789822 Jy ! Component: 200 - total flux cleaned = 0.000894573 Jy ! Total flux subtracted in 200 components = 0.000894573 Jy ! Clean residual min=-0.005030 max=0.005290 Jy/beam ! Clean residual mean=0.000014 rms=0.001544 Jy/beam ! Combined flux in latest and established models = 0.958726 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 149 components and 0.958726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075331Jy sigma=0.000672 ! Fit after self-cal, rms=0.075322Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.138 mas, bmaj=8.164 mas, bpa=-0.3113 degrees ! Estimated noise=2352.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.138 x 8.164 at -0.3113 degrees (North through East) ! Clean map min=-0.012522 max=0.72955 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075322Jy sigma=0.000672 ! Fit after self-cal, rms=0.070602Jy sigma=0.000622 ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=8.163 mas, bpa=-0.298 degrees ! Estimated noise=2352.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000589841 Jy ! Component: 100 - total flux cleaned = -0.000825613 Jy ! Component: 150 - total flux cleaned = -0.00114651 Jy ! Component: 200 - total flux cleaned = -0.00134269 Jy ! Total flux subtracted in 200 components = -0.00134269 Jy ! Clean residual min=-0.005876 max=0.005178 Jy/beam ! Clean residual mean=0.000005 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 0.957383 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 161 components and 0.957383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070242Jy sigma=0.000620 ! Fit after self-cal, rms=0.070239Jy sigma=0.000620 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.42698e-05 Jy ! Component: 100 - total flux cleaned = -9.35216e-05 Jy ! Component: 150 - total flux cleaned = -0.00017612 Jy ! Component: 200 - total flux cleaned = -0.000255366 Jy ! Total flux subtracted in 200 components = -0.000255366 Jy ! Clean residual min=-0.005743 max=0.005117 Jy/beam ! Clean residual mean=0.000005 rms=0.001272 Jy/beam ! Combined flux in latest and established models = 0.957128 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 167 components and 0.957128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070039Jy sigma=0.000618 ! Fit after self-cal, rms=0.070038Jy sigma=0.000618 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070038Jy sigma=0.000618 ! Fit after self-cal, rms=0.070058Jy sigma=0.000618 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=7.206 mas, bpa=-0.4161 degrees ! Estimated noise=2724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.573034 Jy ! Component: 100 - total flux cleaned = 0.714504 Jy ! Component: 150 - total flux cleaned = 0.780053 Jy ! Component: 200 - total flux cleaned = 0.818358 Jy ! Total flux subtracted in 200 components = 0.818358 Jy ! Clean residual min=-0.015521 max=0.019779 Jy/beam ! Clean residual mean=-0.000049 rms=0.004318 Jy/beam ! Combined flux in latest and established models = 0.818358 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.818358 Jy ! Inverting map and beam ! Estimated beam: bmin=3.138 mas, bmaj=8.165 mas, bpa=-0.3219 degrees ! Estimated noise=2352.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0321065 Jy ! Component: 100 - total flux cleaned = 0.0529451 Jy ! Component: 150 - total flux cleaned = 0.0684867 Jy ! Component: 200 - total flux cleaned = 0.0804607 Jy ! Total flux subtracted in 200 components = 0.0804607 Jy ! Clean residual min=-0.009579 max=0.008582 Jy/beam ! Clean residual mean=-0.000029 rms=0.002445 Jy/beam ! Combined flux in latest and established models = 0.898818 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 73 components and 0.898818 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.894 mas, bmaj=16.25 mas, bpa=6.126 degrees ! Estimated noise=2963.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149551 Jy ! Component: 100 - total flux cleaned = 0.024885 Jy ! Component: 150 - total flux cleaned = 0.0322174 Jy ! Component: 200 - total flux cleaned = 0.0378156 Jy ! Total flux subtracted in 200 components = 0.0378156 Jy ! Clean residual min=-0.007171 max=0.005238 Jy/beam ! Clean residual mean=-0.000016 rms=0.001879 Jy/beam ! Combined flux in latest and established models = 0.936634 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438174 Jy ! Component: 100 - total flux cleaned = 0.00784093 Jy ! Component: 150 - total flux cleaned = 0.0106004 Jy ! Component: 200 - total flux cleaned = 0.0125448 Jy ! Total flux subtracted in 200 components = 0.0125448 Jy ! Clean residual min=-0.005650 max=0.005177 Jy/beam ! Clean residual mean=-0.000005 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.949179 Jy ! Adding 101 model components to the UV plane model. ! The established model now contains 168 components and 0.949179 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.138 mas, bmaj=8.165 mas, bpa=-0.3219 degrees ! Estimated noise=2352.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188852 Jy ! Component: 100 - total flux cleaned = 0.00252834 Jy ! Component: 150 - total flux cleaned = 0.00278376 Jy ! Component: 200 - total flux cleaned = 0.00288845 Jy ! Total flux subtracted in 200 components = 0.00288845 Jy ! Clean residual min=-0.005318 max=0.004527 Jy/beam ! Clean residual mean=-0.000002 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.952067 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 195 components and 0.952067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069894Jy sigma=0.000617 ! Fit after self-cal, rms=0.069850Jy sigma=0.000617 wmodel J1513-1012_S_2017_06_10_pus_map.mod ! Writing 195 model components to file: J1513-1012_S_2017_06_10_pus_map.mod wobs J1513-1012_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1513-1012_S_2017_06_10_pus_uvs.fits wwins J1513-1012_S_2017_06_10_pus_map.win ! wwins: Wrote 4 windows to J1513-1012_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00193005 Jy ! Component: 100 - total flux cleaned = -0.00294464 Jy ! Component: 150 - total flux cleaned = -0.00387815 Jy ! Component: 200 - total flux cleaned = -0.00438489 Jy ! Component: 250 - total flux cleaned = -0.00492581 Jy ! Component: 300 - total flux cleaned = -0.00530915 Jy ! Component: 350 - total flux cleaned = -0.00561355 Jy ! Component: 400 - total flux cleaned = -0.00584528 Jy ! Component: 450 - total flux cleaned = -0.00606666 Jy ! Component: 500 - total flux cleaned = -0.0064396 Jy ! Component: 550 - total flux cleaned = -0.00654171 Jy ! Component: 600 - total flux cleaned = -0.00664205 Jy ! Component: 650 - total flux cleaned = -0.00688295 Jy ! Component: 700 - total flux cleaned = -0.0069762 Jy ! Component: 750 - total flux cleaned = -0.00706844 Jy ! Component: 800 - total flux cleaned = -0.00720322 Jy ! Component: 850 - total flux cleaned = -0.0073357 Jy ! Component: 900 - total flux cleaned = -0.00755133 Jy ! Component: 950 - total flux cleaned = -0.00763471 Jy ! Component: 1000 - total flux cleaned = -0.00767702 Jy ! Component: 1050 - total flux cleaned = -0.00779925 Jy ! Component: 1100 - total flux cleaned = -0.00787901 Jy ! Component: 1150 - total flux cleaned = -0.00811291 Jy ! Component: 1200 - total flux cleaned = -0.00815061 Jy ! Component: 1250 - total flux cleaned = -0.00811386 Jy ! Component: 1300 - total flux cleaned = -0.00830023 Jy ! Component: 1350 - total flux cleaned = -0.00837358 Jy ! Component: 1400 - total flux cleaned = -0.00855334 Jy ! Component: 1450 - total flux cleaned = -0.00858814 Jy ! Component: 1500 - total flux cleaned = -0.00865784 Jy ! Component: 1550 - total flux cleaned = -0.00869199 Jy ! Component: 1600 - total flux cleaned = -0.00879351 Jy ! Component: 1650 - total flux cleaned = -0.00876031 Jy ! Component: 1700 - total flux cleaned = -0.00879384 Jy ! Component: 1750 - total flux cleaned = -0.00889149 Jy ! Component: 1800 - total flux cleaned = -0.00895594 Jy ! Component: 1850 - total flux cleaned = -0.00901928 Jy ! Component: 1900 - total flux cleaned = -0.00911359 Jy ! Component: 1950 - total flux cleaned = -0.0092694 Jy ! Component: 2000 - total flux cleaned = -0.00933064 Jy ! Component: 2050 - total flux cleaned = -0.00942248 Jy ! Component: 2100 - total flux cleaned = -0.00951289 Jy ! Component: 2150 - total flux cleaned = -0.00960217 Jy ! Component: 2200 - total flux cleaned = -0.00969063 Jy ! Component: 2250 - total flux cleaned = -0.00971978 Jy ! Component: 2300 - total flux cleaned = -0.00972003 Jy ! Component: 2350 - total flux cleaned = -0.00980664 Jy ! Component: 2400 - total flux cleaned = -0.00977824 Jy ! Component: 2450 - total flux cleaned = -0.00980666 Jy ! Component: 2500 - total flux cleaned = -0.00977862 Jy ! Component: 2550 - total flux cleaned = -0.00980661 Jy ! Component: 2600 - total flux cleaned = -0.00977882 Jy ! Component: 2650 - total flux cleaned = -0.00977868 Jy ! Component: 2700 - total flux cleaned = -0.00977876 Jy ! Component: 2750 - total flux cleaned = -0.00977882 Jy ! Component: 2800 - total flux cleaned = -0.00977874 Jy ! Component: 2850 - total flux cleaned = -0.0097516 Jy ! Component: 2900 - total flux cleaned = -0.00975141 Jy ! Component: 2950 - total flux cleaned = -0.0097245 Jy ! Component: 3000 - total flux cleaned = -0.00969764 Jy ! Component: 3050 - total flux cleaned = -0.00972455 Jy ! Component: 3100 - total flux cleaned = -0.00964459 Jy ! Component: 3150 - total flux cleaned = -0.00961804 Jy ! Component: 3200 - total flux cleaned = -0.0095916 Jy ! Component: 3250 - total flux cleaned = -0.00959153 Jy ! Component: 3300 - total flux cleaned = -0.00956513 Jy ! Component: 3350 - total flux cleaned = -0.00953861 Jy ! Component: 3400 - total flux cleaned = -0.00945948 Jy ! Component: 3450 - total flux cleaned = -0.00948576 Jy ! Component: 3500 - total flux cleaned = -0.00945935 Jy ! Component: 3550 - total flux cleaned = -0.0094067 Jy ! Component: 3600 - total flux cleaned = -0.00938043 Jy ! Component: 3650 - total flux cleaned = -0.00935414 Jy ! Component: 3700 - total flux cleaned = -0.00927532 Jy ! Component: 3750 - total flux cleaned = -0.00924917 Jy ! Component: 3800 - total flux cleaned = -0.00922294 Jy ! Component: 3850 - total flux cleaned = -0.0092229 Jy ! Component: 3900 - total flux cleaned = -0.0091966 Jy ! Component: 3950 - total flux cleaned = -0.00917029 Jy ! Component: 4000 - total flux cleaned = -0.00911764 Jy ! Component: 4050 - total flux cleaned = -0.00911755 Jy ! Total flux subtracted in 4096 components = -0.00906475 Jy ! Clean residual min=-0.001996 max=0.001513 Jy/beam ! Clean residual mean=-0.000002 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.943002 Jy keep ! Adding 228 model components to the UV plane model. ! The established model now contains 423 components and 0.943002 Jy ![Exited script file: muppet] wmap "J1513-1012_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.138 x 8.165 at -0.3219 degrees (North through East) ! Clean map min=-0.0037839 max=0.75058 Jy/beam ! Writing clean map to FITS file: J1513-1012_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.750576 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000417526 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.166882 0.166882 0.333764 0.667528 1.33506 2.67011 5.34023 10.6805 21.3609 42.7218 85.4436 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.75 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.138 x 8.165 at -0.3219 degrees (North through East) ! Clean map min=-0.0037839 max=0.75058 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1513-1012_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:57:00 2019