! Started logfile: J1513-1012_S_2017_03_23_pus_uvs.log on Mon May 13 10:02:29 2019 obs J1513-1012_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1513-1012_S_2017_03_23_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.473148 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1513-1012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 2044 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1513-1012_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 151 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.341948Jy sigma=0.002281 ! Fit after self-cal, rms=0.327103Jy sigma=0.002189 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=7.728 mas, bpa=4.424 degrees ! Estimated noise=2986.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.579686 Jy ! Component: 100 - total flux cleaned = 0.731717 Jy ! Total flux subtracted in 100 components = 0.731717 Jy ! Clean residual min=-0.043977 max=0.067107 Jy/beam ! Clean residual mean=-0.000259 rms=0.011711 Jy/beam ! Combined flux in latest and established models = 0.731717 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.731717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246942Jy sigma=0.001570 ! Fit after self-cal, rms=0.246765Jy sigma=0.001569 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.783 mas, bmaj=8.551 mas, bpa=6.478 degrees ! Estimated noise=2536.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0931904 Jy ! Component: 100 - total flux cleaned = 0.137553 Jy ! Component: 150 - total flux cleaned = 0.161435 Jy ! Component: 200 - total flux cleaned = 0.175326 Jy ! Total flux subtracted in 200 components = 0.175326 Jy ! Clean residual min=-0.037458 max=0.041854 Jy/beam ! Clean residual mean=-0.000076 rms=0.009839 Jy/beam ! Combined flux in latest and established models = 0.907043 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 52 components and 0.907043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207134Jy sigma=0.001356 ! Fit after self-cal, rms=0.207067Jy sigma=0.001355 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.85 HN 1.01 KP 1.05 ! LA 0.99 MK 1.02 NL 0.93 OV 1.05 ! PT 1.00 SC 0.94 ! ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.88 HN 1.04 KP 0.98 ! LA 0.96 MK 1.01 NL 1.15 OV 1.08 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.95 HN 1.03 KP 0.86 ! LA 0.74 MK 1.06 NL 1.28 OV 0.99 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.97 HN 1.05 KP 1.00* ! LA 0.69 MK 1.09 NL 1.00* OV 2.38 ! PT 1.02 SC 1.63 ! ! ! Fit before self-cal, rms=0.207067Jy sigma=0.001355 ! Fit after self-cal, rms=0.155296Jy sigma=0.000815 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.809 mas, bmaj=8.772 mas, bpa=6.133 degrees ! Estimated noise=2572.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224351 Jy ! Component: 100 - total flux cleaned = 0.0271837 Jy ! Component: 150 - total flux cleaned = 0.0275965 Jy ! Component: 200 - total flux cleaned = 0.0279726 Jy ! Total flux subtracted in 200 components = 0.0279726 Jy ! Clean residual min=-0.015075 max=0.013278 Jy/beam ! Clean residual mean=0.000049 rms=0.003735 Jy/beam ! Combined flux in latest and established models = 0.935015 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 81 components and 0.935015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151416Jy sigma=0.000781 ! Fit after self-cal, rms=0.151433Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151433Jy sigma=0.000777 ! Fit after self-cal, rms=0.120244Jy sigma=0.000693 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.81 mas, bmaj=8.805 mas, bpa=6.123 degrees ! Estimated noise=2568.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00739231 Jy ! Component: 100 - total flux cleaned = 0.00923625 Jy ! Component: 150 - total flux cleaned = 0.00924234 Jy ! Component: 200 - total flux cleaned = 0.00940977 Jy ! Total flux subtracted in 200 components = 0.00940977 Jy ! Clean residual min=-0.008217 max=0.010424 Jy/beam ! Clean residual mean=0.000029 rms=0.002087 Jy/beam ! Combined flux in latest and established models = 0.944425 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 97 components and 0.944425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119435Jy sigma=0.000687 ! Fit after self-cal, rms=0.119424Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20.5, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0091401 Jy ! Component: 100 - total flux cleaned = 0.0105581 Jy ! Component: 150 - total flux cleaned = 0.0108949 Jy ! Component: 200 - total flux cleaned = 0.0112156 Jy ! Total flux subtracted in 200 components = 0.0112156 Jy ! Clean residual min=-0.007359 max=0.008135 Jy/beam ! Clean residual mean=0.000025 rms=0.001815 Jy/beam ! Combined flux in latest and established models = 0.955641 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 130 components and 0.95564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118705Jy sigma=0.000679 ! Fit after self-cal, rms=0.118685Jy sigma=0.000679 ! Inverting map ! Added new window around map position (-15.5, 86). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00464871 Jy ! Component: 100 - total flux cleaned = 0.00384534 Jy ! Component: 150 - total flux cleaned = 0.0038381 Jy ! Component: 200 - total flux cleaned = 0.00443187 Jy ! Total flux subtracted in 200 components = 0.00443187 Jy ! Clean residual min=-0.006579 max=0.006345 Jy/beam ! Clean residual mean=0.000021 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.960072 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 150 components and 0.960072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117985Jy sigma=0.000674 ! Fit after self-cal, rms=0.117974Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117974Jy sigma=0.000673 ! Fit after self-cal, rms=0.117584Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.815 mas, bmaj=8.813 mas, bpa=6.104 degrees ! Estimated noise=2564.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323567 Jy ! Component: 100 - total flux cleaned = 0.00391484 Jy ! Component: 150 - total flux cleaned = 0.00404732 Jy ! Component: 200 - total flux cleaned = 0.00416779 Jy ! Total flux subtracted in 200 components = 0.00416779 Jy ! Clean residual min=-0.006515 max=0.005848 Jy/beam ! Clean residual mean=0.000023 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 0.96424 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 165 components and 0.96424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117297Jy sigma=0.000670 ! Fit after self-cal, rms=0.117269Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000598143 Jy ! Component: 100 - total flux cleaned = 0.000810807 Jy ! Component: 150 - total flux cleaned = 0.000912558 Jy ! Component: 200 - total flux cleaned = 0.000914246 Jy ! Total flux subtracted in 200 components = 0.000914246 Jy ! Clean residual min=-0.006235 max=0.005658 Jy/beam ! Clean residual mean=0.000023 rms=0.001442 Jy/beam ! Combined flux in latest and established models = 0.965154 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 173 components and 0.965154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117100Jy sigma=0.000669 ! Fit after self-cal, rms=0.117093Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117093Jy sigma=0.000669 ! Fit after self-cal, rms=0.117042Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.086 mas, bmaj=14.17 mas, bpa=9.93 degrees ! Estimated noise=2975.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000350517 Jy ! Component: 100 - total flux cleaned = -0.000608843 Jy ! Component: 150 - total flux cleaned = -0.0010458 Jy ! Component: 200 - total flux cleaned = -0.00156371 Jy ! Total flux subtracted in 200 components = -0.00156371 Jy ! Clean residual min=-0.006336 max=0.005252 Jy/beam ! Clean residual mean=0.000037 rms=0.001561 Jy/beam ! Combined flux in latest and established models = 0.963591 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 187 components and 0.963591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117000Jy sigma=0.000668 ! Fit after self-cal, rms=0.116967Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.19621e-05 Jy ! Component: 100 - total flux cleaned = -0.000269848 Jy ! Component: 150 - total flux cleaned = -0.000609462 Jy ! Component: 200 - total flux cleaned = -0.000715265 Jy ! Total flux subtracted in 200 components = -0.000715265 Jy ! Clean residual min=-0.006188 max=0.005053 Jy/beam ! Clean residual mean=0.000037 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 0.962875 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 201 components and 0.962875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116954Jy sigma=0.000668 ! Fit after self-cal, rms=0.116933Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.818 mas, bmaj=8.816 mas, bpa=6.08 degrees ! Estimated noise=2565.11 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.818 x 8.816 at 6.08 degrees (North through East) ! Clean map min=-0.0062597 max=0.7602 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116933Jy sigma=0.000668 ! Fit after self-cal, rms=0.112018Jy sigma=0.000616 ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=8.821 mas, bpa=6.099 degrees ! Estimated noise=2563.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000726892 Jy ! Component: 100 - total flux cleaned = -0.000359332 Jy ! Component: 150 - total flux cleaned = -0.000357607 Jy ! Component: 200 - total flux cleaned = -0.000437377 Jy ! Total flux subtracted in 200 components = -0.000437377 Jy ! Clean residual min=-0.005398 max=0.005514 Jy/beam ! Clean residual mean=0.000017 rms=0.001321 Jy/beam ! Combined flux in latest and established models = 0.962438 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 220 components and 0.962438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111860Jy sigma=0.000615 ! Fit after self-cal, rms=0.111847Jy sigma=0.000615 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.38975e-05 Jy ! Component: 100 - total flux cleaned = 8.55583e-05 Jy ! Component: 150 - total flux cleaned = -5.68616e-05 Jy ! Component: 200 - total flux cleaned = -5.62356e-05 Jy ! Total flux subtracted in 200 components = -5.62356e-05 Jy ! Clean residual min=-0.005285 max=0.005450 Jy/beam ! Clean residual mean=0.000017 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 0.962382 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 233 components and 0.962382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111747Jy sigma=0.000615 ! Fit after self-cal, rms=0.111742Jy sigma=0.000615 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111742Jy sigma=0.000615 ! Fit after self-cal, rms=0.111714Jy sigma=0.000614 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=7.972 mas, bpa=4.078 degrees ! Estimated noise=3067.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.584773 Jy ! Component: 100 - total flux cleaned = 0.731794 Jy ! Component: 150 - total flux cleaned = 0.799896 Jy ! Component: 200 - total flux cleaned = 0.83714 Jy ! Total flux subtracted in 200 components = 0.83714 Jy ! Clean residual min=-0.014751 max=0.032187 Jy/beam ! Clean residual mean=-0.000035 rms=0.004407 Jy/beam ! Combined flux in latest and established models = 0.83714 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.83714 Jy ! Inverting map and beam ! Estimated beam: bmin=3.822 mas, bmaj=8.825 mas, bpa=6.074 degrees ! Estimated noise=2563.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0356834 Jy ! Component: 100 - total flux cleaned = 0.0581553 Jy ! Component: 150 - total flux cleaned = 0.0745496 Jy ! Component: 200 - total flux cleaned = 0.0867318 Jy ! Total flux subtracted in 200 components = 0.0867318 Jy ! Clean residual min=-0.008452 max=0.008714 Jy/beam ! Clean residual mean=-0.000001 rms=0.002155 Jy/beam ! Combined flux in latest and established models = 0.923872 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 70 components and 0.923872 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.086 mas, bmaj=14.17 mas, bpa=9.866 degrees ! Estimated noise=2971.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129986 Jy ! Component: 100 - total flux cleaned = 0.0206165 Jy ! Component: 150 - total flux cleaned = 0.0250646 Jy ! Component: 200 - total flux cleaned = 0.0278299 Jy ! Total flux subtracted in 200 components = 0.0278299 Jy ! Clean residual min=-0.006629 max=0.005417 Jy/beam ! Clean residual mean=0.000012 rms=0.001686 Jy/beam ! Combined flux in latest and established models = 0.951702 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209735 Jy ! Component: 100 - total flux cleaned = 0.00333008 Jy ! Component: 150 - total flux cleaned = 0.0042868 Jy ! Component: 200 - total flux cleaned = 0.00514561 Jy ! Total flux subtracted in 200 components = 0.00514561 Jy ! Clean residual min=-0.006117 max=0.004923 Jy/beam ! Clean residual mean=0.000016 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.956847 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 159 components and 0.956847 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.822 mas, bmaj=8.825 mas, bpa=6.074 degrees ! Estimated noise=2563.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154879 Jy ! Component: 100 - total flux cleaned = 0.00222779 Jy ! Component: 150 - total flux cleaned = 0.00193021 Jy ! Component: 200 - total flux cleaned = 0.00234283 Jy ! Total flux subtracted in 200 components = 0.00234283 Jy ! Clean residual min=-0.006207 max=0.006220 Jy/beam ! Clean residual mean=0.000013 rms=0.001450 Jy/beam ! Combined flux in latest and established models = 0.95919 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 182 components and 0.95919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112398Jy sigma=0.000619 ! Fit after self-cal, rms=0.112269Jy sigma=0.000619 wmodel J1513-1012_S_2017_03_23_pus_map.mod ! Writing 182 model components to file: J1513-1012_S_2017_03_23_pus_map.mod wobs J1513-1012_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1513-1012_S_2017_03_23_pus_uvs.fits wwins J1513-1012_S_2017_03_23_pus_map.win ! wwins: Wrote 5 windows to J1513-1012_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115887 Jy ! Component: 100 - total flux cleaned = -0.00146517 Jy ! Component: 150 - total flux cleaned = -0.001751 Jy ! Component: 200 - total flux cleaned = -0.00202111 Jy ! Component: 250 - total flux cleaned = -0.00210845 Jy ! Component: 300 - total flux cleaned = -0.00219047 Jy ! Component: 350 - total flux cleaned = -0.00218925 Jy ! Component: 400 - total flux cleaned = -0.00218863 Jy ! Component: 450 - total flux cleaned = -0.0021115 Jy ! Component: 500 - total flux cleaned = -0.00203575 Jy ! Component: 550 - total flux cleaned = -0.00188884 Jy ! Component: 600 - total flux cleaned = -0.00174445 Jy ! Component: 650 - total flux cleaned = -0.00160341 Jy ! Component: 700 - total flux cleaned = -0.00174069 Jy ! Component: 750 - total flux cleaned = -0.00126339 Jy ! Component: 800 - total flux cleaned = -0.00133162 Jy ! Component: 850 - total flux cleaned = -0.00113535 Jy ! Component: 900 - total flux cleaned = -0.00107165 Jy ! Component: 950 - total flux cleaned = -0.00132717 Jy ! Component: 1000 - total flux cleaned = -0.00119986 Jy ! Component: 1050 - total flux cleaned = -0.000950758 Jy ! Component: 1100 - total flux cleaned = -0.000706114 Jy ! Component: 1150 - total flux cleaned = -0.00076665 Jy ! Component: 1200 - total flux cleaned = -0.00064701 Jy ! Component: 1250 - total flux cleaned = -0.000470803 Jy ! Component: 1300 - total flux cleaned = -0.000645227 Jy ! Component: 1350 - total flux cleaned = -0.000530274 Jy ! Component: 1400 - total flux cleaned = -0.000643985 Jy ! Component: 1450 - total flux cleaned = -0.000868725 Jy ! Component: 1500 - total flux cleaned = -0.000867864 Jy ! Component: 1550 - total flux cleaned = -0.00108753 Jy ! Component: 1600 - total flux cleaned = -0.00125055 Jy ! Component: 1650 - total flux cleaned = -0.00124984 Jy ! Component: 1700 - total flux cleaned = -0.00146287 Jy ! Component: 1750 - total flux cleaned = -0.00167408 Jy ! Component: 1800 - total flux cleaned = -0.00193412 Jy ! Component: 1850 - total flux cleaned = -0.00203724 Jy ! Component: 1900 - total flux cleaned = -0.00213888 Jy ! Component: 1950 - total flux cleaned = -0.00218906 Jy ! Component: 2000 - total flux cleaned = -0.00233863 Jy ! Component: 2050 - total flux cleaned = -0.00233796 Jy ! Component: 2100 - total flux cleaned = -0.00233807 Jy ! Component: 2150 - total flux cleaned = -0.00233838 Jy ! Component: 2200 - total flux cleaned = -0.00229081 Jy ! Component: 2250 - total flux cleaned = -0.00224311 Jy ! Component: 2300 - total flux cleaned = -0.0022434 Jy ! Component: 2350 - total flux cleaned = -0.00219616 Jy ! Component: 2400 - total flux cleaned = -0.00201039 Jy ! Component: 2450 - total flux cleaned = -0.00205635 Jy ! Component: 2500 - total flux cleaned = -0.0020566 Jy ! Component: 2550 - total flux cleaned = -0.00196638 Jy ! Component: 2600 - total flux cleaned = -0.00196595 Jy ! Component: 2650 - total flux cleaned = -0.00174409 Jy ! Component: 2700 - total flux cleaned = -0.00148029 Jy ! Component: 2750 - total flux cleaned = -0.00152438 Jy ! Component: 2800 - total flux cleaned = -0.00135114 Jy ! Component: 2850 - total flux cleaned = -0.0013082 Jy ! Component: 2900 - total flux cleaned = -0.00135052 Jy ! Component: 2950 - total flux cleaned = -0.0013502 Jy ! Component: 3000 - total flux cleaned = -0.00139209 Jy ! Component: 3050 - total flux cleaned = -0.00122516 Jy ! Component: 3100 - total flux cleaned = -0.00134923 Jy ! Component: 3150 - total flux cleaned = -0.00118436 Jy ! Component: 3200 - total flux cleaned = -0.00106129 Jy ! Component: 3250 - total flux cleaned = -0.000939569 Jy ! Component: 3300 - total flux cleaned = -0.000819371 Jy ! Component: 3350 - total flux cleaned = -0.00073976 Jy ! Component: 3400 - total flux cleaned = -0.000700194 Jy ! Component: 3450 - total flux cleaned = -0.000699956 Jy ! Component: 3500 - total flux cleaned = -0.000660865 Jy ! Component: 3550 - total flux cleaned = -0.000582818 Jy ! Component: 3600 - total flux cleaned = -0.00054361 Jy ! Component: 3650 - total flux cleaned = -0.000505053 Jy ! Component: 3700 - total flux cleaned = -0.000428607 Jy ! Component: 3750 - total flux cleaned = -0.000428486 Jy ! Component: 3800 - total flux cleaned = -0.000390663 Jy ! Component: 3850 - total flux cleaned = -0.000240171 Jy ! Component: 3900 - total flux cleaned = -0.000239943 Jy ! Component: 3950 - total flux cleaned = -0.000239857 Jy ! Component: 4000 - total flux cleaned = -0.000203045 Jy ! Component: 4050 - total flux cleaned = -0.000129397 Jy ! Total flux subtracted in 4096 components = -9.24354e-05 Jy ! Clean residual min=-0.002040 max=0.002119 Jy/beam ! Clean residual mean=0.000006 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.959098 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 453 components and 0.959097 Jy ![Exited script file: muppet] wmap "J1513-1012_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.822 x 8.825 at 6.074 degrees (North through East) ! Clean map min=-0.0046759 max=0.76593 Jy/beam ! Writing clean map to FITS file: J1513-1012_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.765927 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000645717 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.252916 0.252916 0.505831 1.01166 2.02332 4.04665 8.0933 16.1866 32.3732 64.7464 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.765 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.822 x 8.825 at 6.074 degrees (North through East) ! Clean map min=-0.0046759 max=0.76593 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1513-1012_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:02:35 2019