! Started logfile: J1513-1012_S_2017_02_24_pus_uvs.log on Sat May 4 11:29:20 2019 obs J1513-1012_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1513-1012_S_2017_02_24_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.436111 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1513-1012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 628 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1513-1012_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.188987Jy sigma=0.001443 ! Fit after self-cal, rms=0.158958Jy sigma=0.001220 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.321 mas, bmaj=18.97 mas, bpa=-26.29 degrees ! Estimated noise=4651.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.689739 Jy ! Component: 100 - total flux cleaned = 0.841985 Jy ! Total flux subtracted in 100 components = 0.841985 Jy ! Clean residual min=-0.025611 max=0.050097 Jy/beam ! Clean residual mean=-0.000041 rms=0.011798 Jy/beam ! Combined flux in latest and established models = 0.841985 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.841985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136252Jy sigma=0.000973 ! Fit after self-cal, rms=0.136171Jy sigma=0.000973 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.08 mas, bmaj=19.41 mas, bpa=-26.19 degrees ! Estimated noise=4043.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0611511 Jy ! Component: 100 - total flux cleaned = 0.0863145 Jy ! Component: 150 - total flux cleaned = 0.0877331 Jy ! Component: 200 - total flux cleaned = 0.0854385 Jy ! Total flux subtracted in 200 components = 0.0854385 Jy ! Clean residual min=-0.013920 max=0.025022 Jy/beam ! Clean residual mean=-0.000107 rms=0.005883 Jy/beam ! Combined flux in latest and established models = 0.927424 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 43 components and 0.927424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106379Jy sigma=0.000770 ! Fit after self-cal, rms=0.106181Jy sigma=0.000769 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.03 HN 1.00* KP 0.99 ! LA 0.99 MK 1.00* NL 0.99 OV 1.07 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 HN 1.00* KP 0.95 ! LA 0.93 MK 1.00* NL 0.94 OV 1.11 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.00* KP 1.04 ! LA 1.04 MK 1.00* NL 1.04 OV 0.99 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.00* KP 1.00* ! LA 0.95 MK 1.00* NL 1.00* OV 1.06 ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.106181Jy sigma=0.000769 ! Fit after self-cal, rms=0.085747Jy sigma=0.000638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.07 mas, bmaj=19.33 mas, bpa=-26.41 degrees ! Estimated noise=4023.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00431085 Jy ! Component: 100 - total flux cleaned = 0.00529283 Jy ! Component: 150 - total flux cleaned = 0.00505952 Jy ! Component: 200 - total flux cleaned = 0.00495515 Jy ! Total flux subtracted in 200 components = 0.00495515 Jy ! Clean residual min=-0.009786 max=0.012460 Jy/beam ! Clean residual mean=0.000002 rms=0.003009 Jy/beam ! Combined flux in latest and established models = 0.932379 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 65 components and 0.932379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085138Jy sigma=0.000633 ! Fit after self-cal, rms=0.085060Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085060Jy sigma=0.000633 ! Fit after self-cal, rms=0.085060Jy sigma=0.000632 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.06 mas, bmaj=19.32 mas, bpa=-26.42 degrees ! Estimated noise=4029.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298705 Jy ! Component: 100 - total flux cleaned = 0.0033622 Jy ! Component: 150 - total flux cleaned = 0.00336921 Jy ! Component: 200 - total flux cleaned = 0.00330774 Jy ! Total flux subtracted in 200 components = 0.00330774 Jy ! Clean residual min=-0.009660 max=0.010838 Jy/beam ! Clean residual mean=-0.000000 rms=0.002826 Jy/beam ! Combined flux in latest and established models = 0.935687 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 87 components and 0.935687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084857Jy sigma=0.000631 ! Fit after self-cal, rms=0.084806Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167725 Jy ! Component: 100 - total flux cleaned = 5.10548e-05 Jy ! Component: 150 - total flux cleaned = 0.000100293 Jy ! Component: 200 - total flux cleaned = 0.000146017 Jy ! Total flux subtracted in 200 components = 0.000146017 Jy ! Clean residual min=-0.009634 max=0.010327 Jy/beam ! Clean residual mean=0.000003 rms=0.002763 Jy/beam ! Combined flux in latest and established models = 0.935833 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 105 components and 0.935833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084748Jy sigma=0.000630 ! Fit after self-cal, rms=0.084711Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084711Jy sigma=0.000630 ! Fit after self-cal, rms=0.084685Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.05 mas, bmaj=19.32 mas, bpa=-26.42 degrees ! Estimated noise=4030.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217226 Jy ! Component: 100 - total flux cleaned = 0.00259091 Jy ! Component: 150 - total flux cleaned = 0.00277478 Jy ! Component: 200 - total flux cleaned = 0.00290294 Jy ! Total flux subtracted in 200 components = 0.00290294 Jy ! Clean residual min=-0.009791 max=0.009852 Jy/beam ! Clean residual mean=-0.000002 rms=0.002685 Jy/beam ! Combined flux in latest and established models = 0.938736 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 120 components and 0.938736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084621Jy sigma=0.000629 ! Fit after self-cal, rms=0.084595Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.73841e-05 Jy ! Component: 100 - total flux cleaned = 0.000174226 Jy ! Component: 150 - total flux cleaned = 0.000253439 Jy ! Component: 200 - total flux cleaned = 0.000290387 Jy ! Total flux subtracted in 200 components = 0.000290387 Jy ! Clean residual min=-0.009868 max=0.009629 Jy/beam ! Clean residual mean=0.000000 rms=0.002651 Jy/beam ! Combined flux in latest and established models = 0.939026 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 128 components and 0.939027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084564Jy sigma=0.000629 ! Fit after self-cal, rms=0.084548Jy sigma=0.000629 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084548Jy sigma=0.000629 ! Fit after self-cal, rms=0.084518Jy sigma=0.000629 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.62 mas, bmaj=19.44 mas, bpa=-28.15 degrees ! Estimated noise=4085.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221046 Jy ! Component: 100 - total flux cleaned = 0.00293139 Jy ! Component: 150 - total flux cleaned = 0.00312845 Jy ! Component: 200 - total flux cleaned = 0.00323522 Jy ! Total flux subtracted in 200 components = 0.00323522 Jy ! Clean residual min=-0.010219 max=0.009876 Jy/beam ! Clean residual mean=0.000003 rms=0.002765 Jy/beam ! Combined flux in latest and established models = 0.942262 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 140 components and 0.942262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084485Jy sigma=0.000628 ! Fit after self-cal, rms=0.084463Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225249 Jy ! Component: 100 - total flux cleaned = 0.000155578 Jy ! Component: 150 - total flux cleaned = 0.000187028 Jy ! Component: 200 - total flux cleaned = 0.000218073 Jy ! Total flux subtracted in 200 components = 0.000218073 Jy ! Clean residual min=-0.010205 max=0.009633 Jy/beam ! Clean residual mean=0.000004 rms=0.002736 Jy/beam ! Combined flux in latest and established models = 0.94248 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 149 components and 0.94248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084450Jy sigma=0.000628 ! Fit after self-cal, rms=0.084435Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=10.04 mas, bmaj=19.31 mas, bpa=-26.42 degrees ! Estimated noise=4031.68 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.04 x 19.31 at -26.42 degrees (North through East) ! Clean map min=-0.010002 max=0.87878 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084435Jy sigma=0.000628 ! Fit after self-cal, rms=0.077495Jy sigma=0.000574 ! Inverting map and beam ! Estimated beam: bmin=10.04 mas, bmaj=19.3 mas, bpa=-26.42 degrees ! Estimated noise=4033.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151968 Jy ! Component: 100 - total flux cleaned = 0.00213161 Jy ! Component: 150 - total flux cleaned = 0.0022702 Jy ! Component: 200 - total flux cleaned = 0.0023688 Jy ! Total flux subtracted in 200 components = 0.0023688 Jy ! Clean residual min=-0.009609 max=0.009063 Jy/beam ! Clean residual mean=-0.000012 rms=0.002474 Jy/beam ! Combined flux in latest and established models = 0.944849 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 170 components and 0.944849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077457Jy sigma=0.000574 ! Fit after self-cal, rms=0.077454Jy sigma=0.000574 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.78829e-05 Jy ! Component: 100 - total flux cleaned = -8.0118e-06 Jy ! Component: 150 - total flux cleaned = -6.1499e-06 Jy ! Component: 200 - total flux cleaned = 5.2317e-05 Jy ! Total flux subtracted in 200 components = 5.2317e-05 Jy ! Clean residual min=-0.009513 max=0.009101 Jy/beam ! Clean residual mean=-0.000011 rms=0.002459 Jy/beam ! Combined flux in latest and established models = 0.944901 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 179 components and 0.944901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077435Jy sigma=0.000574 ! Fit after self-cal, rms=0.077430Jy sigma=0.000574 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077430Jy sigma=0.000574 ! Fit after self-cal, rms=0.077410Jy sigma=0.000574 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.298 mas, bmaj=18.81 mas, bpa=-26.45 degrees ! Estimated noise=4654.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.686646 Jy ! Component: 100 - total flux cleaned = 0.839713 Jy ! Component: 150 - total flux cleaned = 0.893324 Jy ! Component: 200 - total flux cleaned = 0.916419 Jy ! Total flux subtracted in 200 components = 0.916419 Jy ! Clean residual min=-0.010996 max=0.013187 Jy/beam ! Clean residual mean=-0.000060 rms=0.003886 Jy/beam ! Combined flux in latest and established models = 0.916419 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.916419 Jy ! Inverting map and beam ! Estimated beam: bmin=10.04 mas, bmaj=19.29 mas, bpa=-26.42 degrees ! Estimated noise=4034.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170855 Jy ! Component: 100 - total flux cleaned = 0.0253694 Jy ! Component: 150 - total flux cleaned = 0.0273348 Jy ! Component: 200 - total flux cleaned = 0.0283265 Jy ! Total flux subtracted in 200 components = 0.0283265 Jy ! Clean residual min=-0.008636 max=0.010586 Jy/beam ! Clean residual mean=-0.000036 rms=0.002742 Jy/beam ! Combined flux in latest and established models = 0.944746 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 68 components and 0.944746 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.61 mas, bmaj=19.42 mas, bpa=-28.16 degrees ! Estimated noise=4089.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142708 Jy ! Component: 100 - total flux cleaned = 0.00164163 Jy ! Component: 150 - total flux cleaned = 0.00190626 Jy ! Component: 200 - total flux cleaned = 0.00213964 Jy ! Total flux subtracted in 200 components = 0.00213964 Jy ! Clean residual min=-0.009451 max=0.010257 Jy/beam ! Clean residual mean=-0.000026 rms=0.002751 Jy/beam ! Combined flux in latest and established models = 0.946885 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202937 Jy ! Component: 100 - total flux cleaned = 0.00032355 Jy ! Component: 150 - total flux cleaned = 0.000484949 Jy ! Component: 200 - total flux cleaned = 0.000583386 Jy ! Total flux subtracted in 200 components = 0.000583386 Jy ! Clean residual min=-0.009516 max=0.009857 Jy/beam ! Clean residual mean=-0.000021 rms=0.002698 Jy/beam ! Combined flux in latest and established models = 0.947469 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 101 components and 0.947468 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=10.04 mas, bmaj=19.29 mas, bpa=-26.42 degrees ! Estimated noise=4034.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.93685e-05 Jy ! Component: 100 - total flux cleaned = 0.00017596 Jy ! Component: 150 - total flux cleaned = 0.000135778 Jy ! Component: 200 - total flux cleaned = 0.000176323 Jy ! Total flux subtracted in 200 components = 0.000176323 Jy ! Clean residual min=-0.009287 max=0.009129 Jy/beam ! Clean residual mean=-0.000018 rms=0.002538 Jy/beam ! Combined flux in latest and established models = 0.947645 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 118 components and 0.947645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077571Jy sigma=0.000575 ! Fit after self-cal, rms=0.077536Jy sigma=0.000575 wmodel J1513-1012_S_2017_02_24_pus_map.mod ! Writing 118 model components to file: J1513-1012_S_2017_02_24_pus_map.mod wobs J1513-1012_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1513-1012_S_2017_02_24_pus_uvs.fits wwins J1513-1012_S_2017_02_24_pus_map.win ! wwins: Wrote 1 windows to J1513-1012_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000958531 Jy ! Component: 100 - total flux cleaned = 0.0015019 Jy ! Component: 150 - total flux cleaned = 0.0014105 Jy ! Component: 200 - total flux cleaned = 0.000734483 Jy ! Component: 250 - total flux cleaned = 0.00108443 Jy ! Component: 300 - total flux cleaned = 0.00116073 Jy ! Component: 350 - total flux cleaned = 0.0013771 Jy ! Component: 400 - total flux cleaned = 0.00117808 Jy ! Component: 450 - total flux cleaned = 0.000867791 Jy ! Component: 500 - total flux cleaned = 0.000692838 Jy ! Component: 550 - total flux cleaned = 0.000744016 Jy ! Component: 600 - total flux cleaned = 0.000640109 Jy ! Component: 650 - total flux cleaned = 0.000489722 Jy ! Component: 700 - total flux cleaned = 0.000201921 Jy ! Component: 750 - total flux cleaned = -3.05557e-05 Jy ! Component: 800 - total flux cleaned = -0.000344636 Jy ! Component: 850 - total flux cleaned = -0.000647771 Jy ! Component: 900 - total flux cleaned = -0.000817604 Jy ! Component: 950 - total flux cleaned = -0.00118594 Jy ! Component: 1000 - total flux cleaned = -0.0015035 Jy ! Component: 1050 - total flux cleaned = -0.00181288 Jy ! Component: 1100 - total flux cleaned = -0.00211446 Jy ! Component: 1150 - total flux cleaned = -0.00240916 Jy ! Component: 1200 - total flux cleaned = -0.0025892 Jy ! Component: 1250 - total flux cleaned = -0.00269578 Jy ! Component: 1300 - total flux cleaned = -0.00286969 Jy ! Component: 1350 - total flux cleaned = -0.00307389 Jy ! Component: 1400 - total flux cleaned = -0.00317398 Jy ! Component: 1450 - total flux cleaned = -0.00323987 Jy ! Component: 1500 - total flux cleaned = -0.00336977 Jy ! Component: 1550 - total flux cleaned = -0.00346579 Jy ! Component: 1600 - total flux cleaned = -0.00365609 Jy ! Component: 1650 - total flux cleaned = -0.00381316 Jy ! Component: 1700 - total flux cleaned = -0.00396942 Jy ! Component: 1750 - total flux cleaned = -0.00409369 Jy ! Component: 1800 - total flux cleaned = -0.00421763 Jy ! Component: 1850 - total flux cleaned = -0.00431044 Jy ! Component: 1900 - total flux cleaned = -0.00431065 Jy ! Component: 1950 - total flux cleaned = -0.00424839 Jy ! Component: 2000 - total flux cleaned = -0.00424902 Jy ! Component: 2050 - total flux cleaned = -0.00421742 Jy ! Component: 2100 - total flux cleaned = -0.00421739 Jy ! Component: 2150 - total flux cleaned = -0.00421736 Jy ! Component: 2200 - total flux cleaned = -0.00415081 Jy ! Component: 2250 - total flux cleaned = -0.00411629 Jy ! Component: 2300 - total flux cleaned = -0.00411669 Jy ! Component: 2350 - total flux cleaned = -0.00408179 Jy ! Component: 2400 - total flux cleaned = -0.00400962 Jy ! Component: 2450 - total flux cleaned = -0.00401035 Jy ! Component: 2500 - total flux cleaned = -0.00401064 Jy ! Component: 2550 - total flux cleaned = -0.00401045 Jy ! Component: 2600 - total flux cleaned = -0.00401018 Jy ! Component: 2650 - total flux cleaned = -0.00396928 Jy ! Component: 2700 - total flux cleaned = -0.00396982 Jy ! Component: 2750 - total flux cleaned = -0.00396944 Jy ! Component: 2800 - total flux cleaned = -0.00396965 Jy ! Component: 2850 - total flux cleaned = -0.00392507 Jy ! Component: 2900 - total flux cleaned = -0.00392578 Jy ! Component: 2950 - total flux cleaned = -0.00387919 Jy ! Component: 3000 - total flux cleaned = -0.003879 Jy ! Component: 3050 - total flux cleaned = -0.00387974 Jy ! Component: 3100 - total flux cleaned = -0.00377804 Jy ! Component: 3150 - total flux cleaned = -0.00377804 Jy ! Component: 3200 - total flux cleaned = -0.00377738 Jy ! Component: 3250 - total flux cleaned = -0.00377708 Jy ! Component: 3300 - total flux cleaned = -0.00377623 Jy ! Component: 3350 - total flux cleaned = -0.00377645 Jy ! Component: 3400 - total flux cleaned = -0.00371666 Jy ! Component: 3450 - total flux cleaned = -0.00371556 Jy ! Component: 3500 - total flux cleaned = -0.00377863 Jy ! Component: 3550 - total flux cleaned = -0.0037133 Jy ! Component: 3600 - total flux cleaned = -0.00371388 Jy ! Component: 3650 - total flux cleaned = -0.00371457 Jy ! Component: 3700 - total flux cleaned = -0.00371508 Jy ! Component: 3750 - total flux cleaned = -0.00364389 Jy ! Component: 3800 - total flux cleaned = -0.00364397 Jy ! Component: 3850 - total flux cleaned = -0.00364237 Jy ! Component: 3900 - total flux cleaned = -0.00364248 Jy ! Component: 3950 - total flux cleaned = -0.00364246 Jy ! Component: 4000 - total flux cleaned = -0.00364291 Jy ! Component: 4050 - total flux cleaned = -0.0036442 Jy ! Total flux subtracted in 4096 components = -0.00364436 Jy ! Clean residual min=-0.004366 max=0.004340 Jy/beam ! Clean residual mean=0.000021 rms=0.001288 Jy/beam ! Combined flux in latest and established models = 0.944001 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 398 components and 0.944 Jy ![Exited script file: muppet] wmap "J1513-1012_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.04 x 19.29 at -26.42 degrees (North through East) ! Clean map min=-0.013158 max=0.877 Jy/beam ! Writing clean map to FITS file: J1513-1012_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.877001 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00146942 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.502652 0.502652 1.0053 2.01061 4.02121 8.04243 16.0849 32.1697 64.3394 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0044 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.877 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.04 x 19.29 at -26.42 degrees (North through East) ! Clean map min=-0.013158 max=0.877 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1513-1012_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:29:24 2019