! Started logfile: J1513-1012_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:16:16 2019 obs J1513-1012_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1513-1012_S_2017_01_16_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.684722 visibilities/baseline/integration-bin. ! Found source: J1513-1012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 1972 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1513-1012_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.351787Jy sigma=0.002120 ! Fit after self-cal, rms=0.339695Jy sigma=0.002033 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=9.15 mas, bpa=18.56 degrees ! Estimated noise=3085.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.583017 Jy ! Component: 100 - total flux cleaned = 0.719032 Jy ! Total flux subtracted in 100 components = 0.719032 Jy ! Clean residual min=-0.030214 max=0.054126 Jy/beam ! Clean residual mean=0.000093 rms=0.010375 Jy/beam ! Combined flux in latest and established models = 0.719032 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.719032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.280685Jy sigma=0.001221 ! Fit after self-cal, rms=0.280637Jy sigma=0.001220 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.539 mas, bmaj=11.05 mas, bpa=19.37 degrees ! Estimated noise=2426.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.072139 Jy ! Component: 100 - total flux cleaned = 0.112074 Jy ! Component: 150 - total flux cleaned = 0.137811 Jy ! Component: 200 - total flux cleaned = 0.154874 Jy ! Total flux subtracted in 200 components = 0.154874 Jy ! Clean residual min=-0.023122 max=0.041546 Jy/beam ! Clean residual mean=-0.000011 rms=0.008174 Jy/beam ! Combined flux in latest and established models = 0.873907 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 34 components and 0.873907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250482Jy sigma=0.001026 ! Fit after self-cal, rms=0.250173Jy sigma=0.001023 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.91 HN 0.95 KP 1.01 ! LA 1.00 MK 1.00* NL 0.98 OV 1.00 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.94 HN 0.99 KP 0.97 ! LA 0.98 MK 1.00* NL 1.10 OV 1.05 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 0.98 HN 0.98 KP 1.01 ! LA 1.01 MK 1.00* NL 1.08 OV 0.95 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.01 HN 0.95 KP 0.68 ! LA 0.86 MK 1.00* NL 1.00* OV 0.99 ! PT 0.95 SC 1.09 ! ! ! Fit before self-cal, rms=0.250173Jy sigma=0.001023 ! Fit after self-cal, rms=0.173230Jy sigma=0.000857 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.548 mas, bmaj=11.05 mas, bpa=18.72 degrees ! Estimated noise=2433.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0295149 Jy ! Component: 100 - total flux cleaned = 0.0380524 Jy ! Component: 150 - total flux cleaned = 0.0423117 Jy ! Component: 200 - total flux cleaned = 0.0449188 Jy ! Total flux subtracted in 200 components = 0.0449188 Jy ! Clean residual min=-0.016429 max=0.022763 Jy/beam ! Clean residual mean=-0.000023 rms=0.004420 Jy/beam ! Combined flux in latest and established models = 0.918826 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 68 components and 0.918826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166557Jy sigma=0.000799 ! Fit after self-cal, rms=0.166096Jy sigma=0.000794 ! Inverting map ! Added new window around map position (-43, 51.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144238 Jy ! Component: 100 - total flux cleaned = 0.0195592 Jy ! Component: 150 - total flux cleaned = 0.0215259 Jy ! Component: 200 - total flux cleaned = 0.0225723 Jy ! Total flux subtracted in 200 components = 0.0225723 Jy ! Clean residual min=-0.014221 max=0.014512 Jy/beam ! Clean residual mean=-0.000041 rms=0.003667 Jy/beam ! Combined flux in latest and established models = 0.941398 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 95 components and 0.941398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162577Jy sigma=0.000769 ! Fit after self-cal, rms=0.162403Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162403Jy sigma=0.000767 ! Fit after self-cal, rms=0.117624Jy sigma=0.000673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.533 mas, bmaj=11 mas, bpa=18.71 degrees ! Estimated noise=2417.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00507257 Jy ! Component: 100 - total flux cleaned = 0.00457621 Jy ! Component: 150 - total flux cleaned = 0.00393027 Jy ! Component: 200 - total flux cleaned = 0.00297761 Jy ! Total flux subtracted in 200 components = 0.00297761 Jy ! Clean residual min=-0.007562 max=0.009300 Jy/beam ! Clean residual mean=-0.000030 rms=0.001928 Jy/beam ! Combined flux in latest and established models = 0.944376 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 119 components and 0.944376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116635Jy sigma=0.000665 ! Fit after self-cal, rms=0.116548Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (98.5, 39.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052959 Jy ! Component: 100 - total flux cleaned = 0.00488565 Jy ! Component: 150 - total flux cleaned = 0.00473653 Jy ! Component: 200 - total flux cleaned = 0.00428706 Jy ! Total flux subtracted in 200 components = 0.00428706 Jy ! Clean residual min=-0.006270 max=0.006167 Jy/beam ! Clean residual mean=-0.000027 rms=0.001716 Jy/beam ! Combined flux in latest and established models = 0.948663 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 143 components and 0.948663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115702Jy sigma=0.000659 ! Fit after self-cal, rms=0.115676Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115676Jy sigma=0.000659 ! Fit after self-cal, rms=0.115908Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.527 mas, bmaj=11 mas, bpa=18.75 degrees ! Estimated noise=2417.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002072 Jy ! Component: 100 - total flux cleaned = 0.00192371 Jy ! Component: 150 - total flux cleaned = 0.00163878 Jy ! Component: 200 - total flux cleaned = 0.00112402 Jy ! Total flux subtracted in 200 components = 0.00112402 Jy ! Clean residual min=-0.006222 max=0.005764 Jy/beam ! Clean residual mean=-0.000026 rms=0.001590 Jy/beam ! Combined flux in latest and established models = 0.949787 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 159 components and 0.949787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115522Jy sigma=0.000656 ! Fit after self-cal, rms=0.115515Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.82229e-05 Jy ! Component: 100 - total flux cleaned = -0.000443848 Jy ! Component: 150 - total flux cleaned = -0.000661653 Jy ! Component: 200 - total flux cleaned = -0.000866764 Jy ! Total flux subtracted in 200 components = -0.000866764 Jy ! Clean residual min=-0.006042 max=0.005665 Jy/beam ! Clean residual mean=-0.000026 rms=0.001527 Jy/beam ! Combined flux in latest and established models = 0.94892 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 172 components and 0.94892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115300Jy sigma=0.000654 ! Fit after self-cal, rms=0.115298Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115298Jy sigma=0.000654 ! Fit after self-cal, rms=0.115437Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.382 mas, bmaj=14.44 mas, bpa=8.855 degrees ! Estimated noise=2770.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000823876 Jy ! Component: 100 - total flux cleaned = 0.000195582 Jy ! Component: 150 - total flux cleaned = -7.89265e-05 Jy ! Component: 200 - total flux cleaned = 1.02751e-07 Jy ! Total flux subtracted in 200 components = 1.02751e-07 Jy ! Clean residual min=-0.006341 max=0.006142 Jy/beam ! Clean residual mean=-0.000041 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.94892 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 199 components and 0.94892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115313Jy sigma=0.000653 ! Fit after self-cal, rms=0.115312Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108913 Jy ! Component: 100 - total flux cleaned = 0.000108605 Jy ! Component: 150 - total flux cleaned = 0.000106885 Jy ! Component: 200 - total flux cleaned = 0.000109557 Jy ! Total flux subtracted in 200 components = 0.000109557 Jy ! Clean residual min=-0.006108 max=0.005989 Jy/beam ! Clean residual mean=-0.000041 rms=0.001635 Jy/beam ! Combined flux in latest and established models = 0.94903 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 215 components and 0.94903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115233Jy sigma=0.000652 ! Fit after self-cal, rms=0.115233Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.524 mas, bmaj=11.01 mas, bpa=18.78 degrees ! Estimated noise=2417.34 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.524 x 11.01 at 18.78 degrees (North through East) ! Clean map min=-0.0056889 max=0.7411 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115233Jy sigma=0.000652 ! Fit after self-cal, rms=0.109949Jy sigma=0.000605 ! Inverting map and beam ! Estimated beam: bmin=4.526 mas, bmaj=11.01 mas, bpa=18.73 degrees ! Estimated noise=2418.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00053107 Jy ! Component: 100 - total flux cleaned = 0.000534714 Jy ! Component: 150 - total flux cleaned = 0.000441775 Jy ! Component: 200 - total flux cleaned = 0.000185055 Jy ! Total flux subtracted in 200 components = 0.000185055 Jy ! Clean residual min=-0.005607 max=0.004983 Jy/beam ! Clean residual mean=-0.000023 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 0.949215 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 234 components and 0.949215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109735Jy sigma=0.000604 ! Fit after self-cal, rms=0.109732Jy sigma=0.000604 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025534 Jy ! Component: 100 - total flux cleaned = 0.000173534 Jy ! Component: 150 - total flux cleaned = 0.000174234 Jy ! Component: 200 - total flux cleaned = 0.000102792 Jy ! Total flux subtracted in 200 components = 0.000102792 Jy ! Clean residual min=-0.005523 max=0.004933 Jy/beam ! Clean residual mean=-0.000024 rms=0.001363 Jy/beam ! Combined flux in latest and established models = 0.949318 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 244 components and 0.949318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109596Jy sigma=0.000603 ! Fit after self-cal, rms=0.109596Jy sigma=0.000603 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109596Jy sigma=0.000603 ! Fit after self-cal, rms=0.109644Jy sigma=0.000603 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.808 mas, bmaj=9.071 mas, bpa=17.66 degrees ! Estimated noise=3049.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.575458 Jy ! Component: 100 - total flux cleaned = 0.712281 Jy ! Component: 150 - total flux cleaned = 0.773999 Jy ! Component: 200 - total flux cleaned = 0.807739 Jy ! Total flux subtracted in 200 components = 0.807739 Jy ! Clean residual min=-0.013381 max=0.018106 Jy/beam ! Clean residual mean=-0.000006 rms=0.003923 Jy/beam ! Combined flux in latest and established models = 0.807739 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.807739 Jy ! Inverting map and beam ! Estimated beam: bmin=4.523 mas, bmaj=11.02 mas, bpa=18.77 degrees ! Estimated noise=2418.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0328978 Jy ! Component: 100 - total flux cleaned = 0.0542138 Jy ! Component: 150 - total flux cleaned = 0.0698683 Jy ! Component: 200 - total flux cleaned = 0.0821199 Jy ! Total flux subtracted in 200 components = 0.0821199 Jy ! Clean residual min=-0.008624 max=0.010172 Jy/beam ! Clean residual mean=-0.000024 rms=0.002549 Jy/beam ! Combined flux in latest and established models = 0.889859 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 91 components and 0.889859 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.377 mas, bmaj=14.46 mas, bpa=8.828 degrees ! Estimated noise=2771.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141802 Jy ! Component: 100 - total flux cleaned = 0.0242256 Jy ! Component: 150 - total flux cleaned = 0.0317706 Jy ! Component: 200 - total flux cleaned = 0.0377972 Jy ! Total flux subtracted in 200 components = 0.0377972 Jy ! Clean residual min=-0.007080 max=0.007994 Jy/beam ! Clean residual mean=-0.000031 rms=0.002045 Jy/beam ! Combined flux in latest and established models = 0.927656 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376463 Jy ! Component: 100 - total flux cleaned = 0.00595505 Jy ! Component: 150 - total flux cleaned = 0.00757575 Jy ! Component: 200 - total flux cleaned = 0.00926388 Jy ! Total flux subtracted in 200 components = 0.00926388 Jy ! Clean residual min=-0.006432 max=0.007034 Jy/beam ! Clean residual mean=-0.000030 rms=0.001771 Jy/beam ! Combined flux in latest and established models = 0.93692 Jy ! Adding 102 model components to the UV plane model. ! The established model now contains 188 components and 0.93692 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.523 mas, bmaj=11.02 mas, bpa=18.77 degrees ! Estimated noise=2418.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184958 Jy ! Component: 100 - total flux cleaned = 0.00229955 Jy ! Component: 150 - total flux cleaned = 0.00270189 Jy ! Component: 200 - total flux cleaned = 0.00306912 Jy ! Total flux subtracted in 200 components = 0.00306912 Jy ! Clean residual min=-0.005814 max=0.005971 Jy/beam ! Clean residual mean=-0.000018 rms=0.001455 Jy/beam ! Combined flux in latest and established models = 0.939989 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 215 components and 0.939989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110168Jy sigma=0.000606 ! Fit after self-cal, rms=0.110129Jy sigma=0.000605 wmodel J1513-1012_S_2017_01_16_pus_map.mod ! Writing 215 model components to file: J1513-1012_S_2017_01_16_pus_map.mod wobs J1513-1012_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1513-1012_S_2017_01_16_pus_uvs.fits wwins J1513-1012_S_2017_01_16_pus_map.win ! wwins: Wrote 4 windows to J1513-1012_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319701 Jy ! Component: 100 - total flux cleaned = -0.00078968 Jy ! Component: 150 - total flux cleaned = -0.00123547 Jy ! Component: 200 - total flux cleaned = -0.00174454 Jy ! Component: 250 - total flux cleaned = -0.00223206 Jy ! Component: 300 - total flux cleaned = -0.00270268 Jy ! Component: 350 - total flux cleaned = -0.003078 Jy ! Component: 400 - total flux cleaned = -0.0033672 Jy ! Component: 450 - total flux cleaned = -0.00378965 Jy ! Component: 500 - total flux cleaned = -0.00413177 Jy ! Component: 550 - total flux cleaned = -0.00433035 Jy ! Component: 600 - total flux cleaned = -0.00439596 Jy ! Component: 650 - total flux cleaned = -0.00464896 Jy ! Component: 700 - total flux cleaned = -0.00495807 Jy ! Component: 750 - total flux cleaned = -0.00520029 Jy ! Component: 800 - total flux cleaned = -0.00526014 Jy ! Component: 850 - total flux cleaned = -0.00532028 Jy ! Component: 900 - total flux cleaned = -0.00549385 Jy ! Component: 950 - total flux cleaned = -0.00549432 Jy ! Component: 1000 - total flux cleaned = -0.00566277 Jy ! Component: 1050 - total flux cleaned = -0.00571764 Jy ! Component: 1100 - total flux cleaned = -0.00571845 Jy ! Component: 1150 - total flux cleaned = -0.00577286 Jy ! Component: 1200 - total flux cleaned = -0.005773 Jy ! Component: 1250 - total flux cleaned = -0.00582511 Jy ! Component: 1300 - total flux cleaned = -0.00582564 Jy ! Component: 1350 - total flux cleaned = -0.00597683 Jy ! Component: 1400 - total flux cleaned = -0.00582628 Jy ! Component: 1450 - total flux cleaned = -0.00572758 Jy ! Component: 1500 - total flux cleaned = -0.00568005 Jy ! Component: 1550 - total flux cleaned = -0.0057277 Jy ! Component: 1600 - total flux cleaned = -0.0055857 Jy ! Component: 1650 - total flux cleaned = -0.00558621 Jy ! Component: 1700 - total flux cleaned = -0.00549397 Jy ! Component: 1750 - total flux cleaned = -0.00558504 Jy ! Component: 1800 - total flux cleaned = -0.00544966 Jy ! Component: 1850 - total flux cleaned = -0.00540524 Jy ! Component: 1900 - total flux cleaned = -0.00540495 Jy ! Component: 1950 - total flux cleaned = -0.00522992 Jy ! Component: 2000 - total flux cleaned = -0.00518649 Jy ! Component: 2050 - total flux cleaned = -0.00497326 Jy ! Component: 2100 - total flux cleaned = -0.00510009 Jy ! Component: 2150 - total flux cleaned = -0.004975 Jy ! Component: 2200 - total flux cleaned = -0.004892 Jy ! Component: 2250 - total flux cleaned = -0.00489186 Jy ! Component: 2300 - total flux cleaned = -0.00481019 Jy ! Component: 2350 - total flux cleaned = -0.00472957 Jy ! Component: 2400 - total flux cleaned = -0.0046099 Jy ! Component: 2450 - total flux cleaned = -0.00457057 Jy ! Component: 2500 - total flux cleaned = -0.00445319 Jy ! Component: 2550 - total flux cleaned = -0.00445342 Jy ! Component: 2600 - total flux cleaned = -0.00429954 Jy ! Component: 2650 - total flux cleaned = -0.00426143 Jy ! Component: 2700 - total flux cleaned = -0.00422373 Jy ! Component: 2750 - total flux cleaned = -0.0041117 Jy ! Component: 2800 - total flux cleaned = -0.00399979 Jy ! Component: 2850 - total flux cleaned = -0.00392597 Jy ! Component: 2900 - total flux cleaned = -0.00370662 Jy ! Component: 2950 - total flux cleaned = -0.00367036 Jy ! Component: 3000 - total flux cleaned = -0.00356213 Jy ! Component: 3050 - total flux cleaned = -0.00345463 Jy ! Component: 3100 - total flux cleaned = -0.00338373 Jy ! Component: 3150 - total flux cleaned = -0.00324253 Jy ! Component: 3200 - total flux cleaned = -0.00317243 Jy ! Component: 3250 - total flux cleaned = -0.00306833 Jy ! Component: 3300 - total flux cleaned = -0.00286109 Jy ! Component: 3350 - total flux cleaned = -0.00275835 Jy ! Component: 3400 - total flux cleaned = -0.00275866 Jy ! Component: 3450 - total flux cleaned = -0.00258927 Jy ! Component: 3500 - total flux cleaned = -0.00242132 Jy ! Component: 3550 - total flux cleaned = -0.00228812 Jy ! Component: 3600 - total flux cleaned = -0.00222176 Jy ! Component: 3650 - total flux cleaned = -0.00209047 Jy ! Component: 3700 - total flux cleaned = -0.00202497 Jy ! Component: 3750 - total flux cleaned = -0.00189463 Jy ! Component: 3800 - total flux cleaned = -0.00186261 Jy ! Component: 3850 - total flux cleaned = -0.00176597 Jy ! Component: 3900 - total flux cleaned = -0.00163829 Jy ! Component: 3950 - total flux cleaned = -0.00157463 Jy ! Component: 4000 - total flux cleaned = -0.00151109 Jy ! Component: 4050 - total flux cleaned = -0.00138509 Jy ! Total flux subtracted in 4096 components = -0.0012602 Jy ! Clean residual min=-0.002288 max=0.001784 Jy/beam ! Clean residual mean=-0.000002 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.938729 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 497 components and 0.938729 Jy ![Exited script file: muppet] wmap "J1513-1012_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.523 x 11.02 at 18.77 degrees (North through East) ! Clean map min=-0.0044073 max=0.75079 Jy/beam ! Writing clean map to FITS file: J1513-1012_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.750787 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000587353 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.234695 0.234695 0.46939 0.93878 1.87756 3.75512 7.51024 15.0205 30.041 60.0819 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.75 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.523 x 11.02 at 18.77 degrees (North through East) ! Clean map min=-0.0044073 max=0.75079 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1513-1012_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:16:21 2019