! Started logfile: J1512-0905_S_2017_09_26_pus_uvs.log on Sat May 11 13:02:04 2019 obs J1512-0905_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1512-0905_S_2017_09_26_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.457265 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1512-0905 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 1712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1512-0905_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.447689Jy sigma=0.020115 ! Fit after self-cal, rms=2.436702Jy sigma=0.020038 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=30.45 mas, bpa=-16.75 degrees ! Estimated noise=2719.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.60871 Jy ! Component: 100 - total flux cleaned = 3.19726 Jy ! Total flux subtracted in 100 components = 3.19726 Jy ! Clean residual min=-0.131221 max=0.214603 Jy/beam ! Clean residual mean=0.000087 rms=0.041986 Jy/beam ! Combined flux in latest and established models = 3.19726 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 3.19726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.427885Jy sigma=0.003391 ! Fit after self-cal, rms=0.427879Jy sigma=0.003391 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.758 mas, bmaj=27.89 mas, bpa=-16.54 degrees ! Estimated noise=2319.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.230773 Jy ! Component: 100 - total flux cleaned = 0.306664 Jy ! Component: 150 - total flux cleaned = 0.30243 Jy ! Component: 200 - total flux cleaned = 0.297576 Jy ! Total flux subtracted in 200 components = 0.297576 Jy ! Clean residual min=-0.053966 max=0.065065 Jy/beam ! Clean residual mean=-0.000107 rms=0.014024 Jy/beam ! Combined flux in latest and established models = 3.49484 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 33 components and 3.49484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295876Jy sigma=0.002334 ! Fit after self-cal, rms=0.295837Jy sigma=0.002334 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 0.95 KP 1.06 ! LA 1.00 MK 0.97 NL 0.90 OV 1.03 ! PT 0.99 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.99 KP 1.01 ! LA 0.96 MK 0.97 NL 1.05 OV 1.06 ! PT 0.97 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.98 KP 1.00 ! LA 0.98 MK 1.00 NL 1.02 OV 0.97 ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.00* KP 1.00* ! LA 1.29 MK 1.32 NL 1.00* OV 1.00* ! PT 0.98 ! ! ! Fit before self-cal, rms=0.295837Jy sigma=0.002334 ! Fit after self-cal, rms=0.102007Jy sigma=0.000805 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.766 mas, bmaj=27.52 mas, bpa=-16.56 degrees ! Estimated noise=2343.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238957 Jy ! Component: 100 - total flux cleaned = 0.00238751 Jy ! Component: 150 - total flux cleaned = 0.00177532 Jy ! Component: 200 - total flux cleaned = 0.00257329 Jy ! Total flux subtracted in 200 components = 0.00257329 Jy ! Clean residual min=-0.011353 max=0.013462 Jy/beam ! Clean residual mean=-0.000037 rms=0.003439 Jy/beam ! Combined flux in latest and established models = 3.49741 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 3.49741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099792Jy sigma=0.000786 ! Fit after self-cal, rms=0.099883Jy sigma=0.000785 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099883Jy sigma=0.000785 ! Fit after self-cal, rms=0.092525Jy sigma=0.000728 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=27.54 mas, bpa=-16.57 degrees ! Estimated noise=2342.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257562 Jy ! Component: 100 - total flux cleaned = 0.00125067 Jy ! Component: 150 - total flux cleaned = 0.0021277 Jy ! Component: 200 - total flux cleaned = 0.00338195 Jy ! Total flux subtracted in 200 components = 0.00338195 Jy ! Clean residual min=-0.009344 max=0.008431 Jy/beam ! Clean residual mean=-0.000010 rms=0.002491 Jy/beam ! Combined flux in latest and established models = 3.50079 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 66 components and 3.50079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091799Jy sigma=0.000721 ! Fit after self-cal, rms=0.091776Jy sigma=0.000721 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010304 Jy ! Component: 100 - total flux cleaned = 0.0019417 Jy ! Component: 150 - total flux cleaned = 0.00278408 Jy ! Component: 200 - total flux cleaned = 0.00346095 Jy ! Total flux subtracted in 200 components = 0.00346095 Jy ! Clean residual min=-0.008853 max=0.008073 Jy/beam ! Clean residual mean=-0.000011 rms=0.002367 Jy/beam ! Combined flux in latest and established models = 3.50425 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 91 components and 3.50425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091473Jy sigma=0.000719 ! Fit after self-cal, rms=0.091469Jy sigma=0.000719 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091469Jy sigma=0.000719 ! Fit after self-cal, rms=0.091350Jy sigma=0.000718 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=27.53 mas, bpa=-16.57 degrees ! Estimated noise=2341.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000394678 Jy ! Component: 100 - total flux cleaned = 0.000459902 Jy ! Component: 150 - total flux cleaned = 0.00156245 Jy ! Component: 200 - total flux cleaned = 0.00248465 Jy ! Total flux subtracted in 200 components = 0.00248465 Jy ! Clean residual min=-0.008480 max=0.007560 Jy/beam ! Clean residual mean=-0.000008 rms=0.002215 Jy/beam ! Combined flux in latest and established models = 3.50674 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 113 components and 3.50674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091083Jy sigma=0.000716 ! Fit after self-cal, rms=0.091085Jy sigma=0.000716 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000866594 Jy ! Component: 100 - total flux cleaned = 0.00167737 Jy ! Component: 150 - total flux cleaned = 0.00235465 Jy ! Component: 200 - total flux cleaned = 0.00299183 Jy ! Total flux subtracted in 200 components = 0.00299183 Jy ! Clean residual min=-0.008211 max=0.007279 Jy/beam ! Clean residual mean=-0.000009 rms=0.002156 Jy/beam ! Combined flux in latest and established models = 3.50973 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 128 components and 3.50973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090945Jy sigma=0.000715 ! Fit after self-cal, rms=0.090947Jy sigma=0.000715 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090947Jy sigma=0.000715 ! Fit after self-cal, rms=0.090856Jy sigma=0.000714 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.585 mas, bmaj=26.6 mas, bpa=-13.2 degrees ! Estimated noise=2734.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141399 Jy ! Component: 100 - total flux cleaned = 0.00227707 Jy ! Component: 150 - total flux cleaned = 0.00304701 Jy ! Component: 200 - total flux cleaned = 0.00375064 Jy ! Total flux subtracted in 200 components = 0.00375064 Jy ! Clean residual min=-0.008769 max=0.007440 Jy/beam ! Clean residual mean=-0.000015 rms=0.002549 Jy/beam ! Combined flux in latest and established models = 3.51348 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 153 components and 3.51348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090737Jy sigma=0.000713 ! Fit after self-cal, rms=0.090740Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000916477 Jy ! Component: 100 - total flux cleaned = 0.0014504 Jy ! Component: 150 - total flux cleaned = 0.00206955 Jy ! Component: 200 - total flux cleaned = 0.00241704 Jy ! Total flux subtracted in 200 components = 0.00241704 Jy ! Clean residual min=-0.008570 max=0.007097 Jy/beam ! Clean residual mean=-0.000016 rms=0.002509 Jy/beam ! Combined flux in latest and established models = 3.5159 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 161 components and 3.5159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090682Jy sigma=0.000713 ! Fit after self-cal, rms=0.090687Jy sigma=0.000713 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=27.52 mas, bpa=-16.57 degrees ! Estimated noise=2341.11 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.767 x 27.52 at -16.57 degrees (North through East) ! Clean map min=-0.018185 max=3.3795 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090687Jy sigma=0.000713 ! Fit after self-cal, rms=0.074105Jy sigma=0.000584 ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=27.51 mas, bpa=-16.57 degrees ! Estimated noise=2340.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000824486 Jy ! Component: 100 - total flux cleaned = 0.000913814 Jy ! Component: 150 - total flux cleaned = 0.00120406 Jy ! Component: 200 - total flux cleaned = 0.00160807 Jy ! Total flux subtracted in 200 components = 0.00160807 Jy ! Clean residual min=-0.006933 max=0.006197 Jy/beam ! Clean residual mean=-0.000009 rms=0.001933 Jy/beam ! Combined flux in latest and established models = 3.51751 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 180 components and 3.51751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073955Jy sigma=0.000583 ! Fit after self-cal, rms=0.073951Jy sigma=0.000583 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000392375 Jy ! Component: 100 - total flux cleaned = 0.000696001 Jy ! Component: 150 - total flux cleaned = 0.00109778 Jy ! Component: 200 - total flux cleaned = 0.00147673 Jy ! Total flux subtracted in 200 components = 0.00147673 Jy ! Clean residual min=-0.006663 max=0.006105 Jy/beam ! Clean residual mean=-0.000009 rms=0.001901 Jy/beam ! Combined flux in latest and established models = 3.51898 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 186 components and 3.51898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073874Jy sigma=0.000582 ! Fit after self-cal, rms=0.073869Jy sigma=0.000582 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073869Jy sigma=0.000582 ! Fit after self-cal, rms=0.073829Jy sigma=0.000582 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=30.01 mas, bpa=-16.83 degrees ! Estimated noise=2708.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.58766 Jy ! Component: 100 - total flux cleaned = 3.16038 Jy ! Component: 150 - total flux cleaned = 3.36138 Jy ! Component: 200 - total flux cleaned = 3.45241 Jy ! Total flux subtracted in 200 components = 3.45241 Jy ! Clean residual min=-0.029875 max=0.042092 Jy/beam ! Clean residual mean=0.000038 rms=0.008006 Jy/beam ! Combined flux in latest and established models = 3.45241 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 3.45241 Jy ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=27.51 mas, bpa=-16.57 degrees ! Estimated noise=2340.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410458 Jy ! Component: 100 - total flux cleaned = 0.0451948 Jy ! Component: 150 - total flux cleaned = 0.0466783 Jy ! Component: 200 - total flux cleaned = 0.0477517 Jy ! Total flux subtracted in 200 components = 0.0477517 Jy ! Clean residual min=-0.011607 max=0.010165 Jy/beam ! Clean residual mean=0.000004 rms=0.003022 Jy/beam ! Combined flux in latest and established models = 3.50016 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 57 components and 3.50016 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.586 mas, bmaj=26.59 mas, bpa=-13.2 degrees ! Estimated noise=2733.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101804 Jy ! Component: 100 - total flux cleaned = 0.0134477 Jy ! Component: 150 - total flux cleaned = 0.0149504 Jy ! Component: 200 - total flux cleaned = 0.015742 Jy ! Total flux subtracted in 200 components = 0.015742 Jy ! Clean residual min=-0.009257 max=0.007780 Jy/beam ! Clean residual mean=-0.000014 rms=0.002546 Jy/beam ! Combined flux in latest and established models = 3.51591 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000414843 Jy ! Component: 100 - total flux cleaned = 0.000783942 Jy ! Component: 150 - total flux cleaned = 0.00111178 Jy ! Component: 200 - total flux cleaned = 0.00149778 Jy ! Total flux subtracted in 200 components = 0.00149778 Jy ! Clean residual min=-0.008764 max=0.007482 Jy/beam ! Clean residual mean=-0.000013 rms=0.002441 Jy/beam ! Combined flux in latest and established models = 3.5174 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 107 components and 3.5174 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=27.51 mas, bpa=-16.57 degrees ! Estimated noise=2340.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00167028 Jy ! Component: 100 - total flux cleaned = -0.00143254 Jy ! Component: 150 - total flux cleaned = -0.00162287 Jy ! Component: 200 - total flux cleaned = -0.00161884 Jy ! Total flux subtracted in 200 components = -0.00161884 Jy ! Clean residual min=-0.007537 max=0.007470 Jy/beam ! Clean residual mean=-0.000006 rms=0.002017 Jy/beam ! Combined flux in latest and established models = 3.51579 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 126 components and 3.51579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074236Jy sigma=0.000585 ! Fit after self-cal, rms=0.074201Jy sigma=0.000585 wmodel J1512-0905_S_2017_09_26_pus_map.mod ! Writing 126 model components to file: J1512-0905_S_2017_09_26_pus_map.mod wobs J1512-0905_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1512-0905_S_2017_09_26_pus_uvs.fits wwins J1512-0905_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1512-0905_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107875 Jy ! Component: 100 - total flux cleaned = -0.00120013 Jy ! Component: 150 - total flux cleaned = -0.00159874 Jy ! Component: 200 - total flux cleaned = -0.00123518 Jy ! Component: 250 - total flux cleaned = -0.00123542 Jy ! Component: 300 - total flux cleaned = -0.00107588 Jy ! Component: 350 - total flux cleaned = -0.000922428 Jy ! Component: 400 - total flux cleaned = -0.00070599 Jy ! Component: 450 - total flux cleaned = -0.000567734 Jy ! Component: 500 - total flux cleaned = -0.000368918 Jy ! Component: 550 - total flux cleaned = -0.000619616 Jy ! Component: 600 - total flux cleaned = -0.00074033 Jy ! Component: 650 - total flux cleaned = -0.000976332 Jy ! Component: 700 - total flux cleaned = -0.00103421 Jy ! Component: 750 - total flux cleaned = -0.000925058 Jy ! Component: 800 - total flux cleaned = -0.000980086 Jy ! Component: 850 - total flux cleaned = -0.000981014 Jy ! Component: 900 - total flux cleaned = -0.00103213 Jy ! Component: 950 - total flux cleaned = -0.00118034 Jy ! Component: 1000 - total flux cleaned = -0.00137243 Jy ! Component: 1050 - total flux cleaned = -0.00141968 Jy ! Component: 1100 - total flux cleaned = -0.00169542 Jy ! Component: 1150 - total flux cleaned = -0.00183041 Jy ! Component: 1200 - total flux cleaned = -0.00209173 Jy ! Component: 1250 - total flux cleaned = -0.00230406 Jy ! Component: 1300 - total flux cleaned = -0.00242848 Jy ! Component: 1350 - total flux cleaned = -0.00258977 Jy ! Component: 1400 - total flux cleaned = -0.00254859 Jy ! Component: 1450 - total flux cleaned = -0.00266443 Jy ! Component: 1500 - total flux cleaned = -0.0026268 Jy ! Component: 1550 - total flux cleaned = -0.00266446 Jy ! Component: 1600 - total flux cleaned = -0.00273736 Jy ! Component: 1650 - total flux cleaned = -0.00295058 Jy ! Component: 1700 - total flux cleaned = -0.00309008 Jy ! Component: 1750 - total flux cleaned = -0.00329665 Jy ! Component: 1800 - total flux cleaned = -0.0034662 Jy ! Component: 1850 - total flux cleaned = -0.00366607 Jy ! Component: 1900 - total flux cleaned = -0.00382948 Jy ! Component: 1950 - total flux cleaned = -0.00399109 Jy ! Component: 2000 - total flux cleaned = -0.0041188 Jy ! Component: 2050 - total flux cleaned = -0.00430748 Jy ! Component: 2100 - total flux cleaned = -0.00430776 Jy ! Component: 2150 - total flux cleaned = -0.00436957 Jy ! Component: 2200 - total flux cleaned = -0.00446105 Jy ! Component: 2250 - total flux cleaned = -0.00452113 Jy ! Component: 2300 - total flux cleaned = -0.00458066 Jy ! Component: 2350 - total flux cleaned = -0.00469845 Jy ! Component: 2400 - total flux cleaned = -0.0048153 Jy ! Component: 2450 - total flux cleaned = -0.0049022 Jy ! Component: 2500 - total flux cleaned = -0.00501708 Jy ! Component: 2550 - total flux cleaned = -0.00518775 Jy ! Component: 2600 - total flux cleaned = -0.00530066 Jy ! Component: 2650 - total flux cleaned = -0.00541267 Jy ! Component: 2700 - total flux cleaned = -0.00557915 Jy ! Component: 2750 - total flux cleaned = -0.00574399 Jy ! Component: 2800 - total flux cleaned = -0.00579874 Jy ! Component: 2850 - total flux cleaned = -0.00596159 Jy ! Component: 2900 - total flux cleaned = -0.00612307 Jy ! Component: 2950 - total flux cleaned = -0.0061497 Jy ! Component: 3000 - total flux cleaned = -0.0062296 Jy ! Component: 3050 - total flux cleaned = -0.00638814 Jy ! Component: 3100 - total flux cleaned = -0.00646699 Jy ! Component: 3150 - total flux cleaned = -0.00651939 Jy ! Component: 3200 - total flux cleaned = -0.0066235 Jy ! Component: 3250 - total flux cleaned = -0.00677859 Jy ! Component: 3300 - total flux cleaned = -0.00680434 Jy ! Component: 3350 - total flux cleaned = -0.00690632 Jy ! Component: 3400 - total flux cleaned = -0.00693183 Jy ! Component: 3450 - total flux cleaned = -0.00693195 Jy ! Component: 3500 - total flux cleaned = -0.00693193 Jy ! Component: 3550 - total flux cleaned = -0.00688142 Jy ! Component: 3600 - total flux cleaned = -0.0068563 Jy ! Component: 3650 - total flux cleaned = -0.00690636 Jy ! Component: 3700 - total flux cleaned = -0.00685596 Jy ! Component: 3750 - total flux cleaned = -0.00685597 Jy ! Component: 3800 - total flux cleaned = -0.0068559 Jy ! Component: 3850 - total flux cleaned = -0.00685577 Jy ! Component: 3900 - total flux cleaned = -0.00683086 Jy ! Component: 3950 - total flux cleaned = -0.00688051 Jy ! Component: 4000 - total flux cleaned = -0.00692989 Jy ! Component: 4050 - total flux cleaned = -0.00690509 Jy ! Total flux subtracted in 4096 components = -0.00692985 Jy ! Clean residual min=-0.001419 max=0.001387 Jy/beam ! Clean residual mean=0.000008 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 3.50886 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 434 components and 3.50886 Jy ![Exited script file: muppet] wmap "J1512-0905_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.767 x 27.51 at -16.57 degrees (North through East) ! Clean map min=-0.019048 max=3.3757 Jy/beam ! Writing clean map to FITS file: J1512-0905_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.37567 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000415317 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0369098 0.0369098 0.0738195 0.147639 0.295278 0.590556 1.18111 2.36223 4.72445 9.4489 18.8978 37.7956 75.5912 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 3.375 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.767 x 27.51 at -16.57 degrees (North through East) ! Clean map min=-0.019048 max=3.3757 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1512-0905_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:02:09 2019