! Started logfile: J1512-0905_S_2017_05_27_pus_uvs.log on Fri May 3 11:09:52 2019 obs J1512-0905_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1512-0905_S_2017_05_27_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.108333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1512-0905 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 156 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1512-0905_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=3.531226Jy sigma=0.020519 ! Fit after self-cal, rms=3.546615Jy sigma=0.020530 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.792 mas, bmaj=11.33 mas, bpa=33.71 degrees ! Estimated noise=14021.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.51907 Jy ! Component: 100 - total flux cleaned = 4.19578 Jy ! Total flux subtracted in 100 components = 4.19578 Jy ! Clean residual min=-0.281655 max=0.286319 Jy/beam ! Clean residual mean=-0.000073 rms=0.097129 Jy/beam ! Combined flux in latest and established models = 4.19578 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 4.19578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.587053Jy sigma=0.003248 ! Fit after self-cal, rms=0.586816Jy sigma=0.003245 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=12.53 mas, bpa=34.58 degrees ! Estimated noise=12371 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.173949 Jy ! Component: 100 - total flux cleaned = 0.211246 Jy ! Component: 150 - total flux cleaned = 0.251729 Jy ! Component: 200 - total flux cleaned = 0.309088 Jy ! Total flux subtracted in 200 components = 0.309088 Jy ! Clean residual min=-0.138163 max=0.139307 Jy/beam ! Clean residual mean=-0.000091 rms=0.039454 Jy/beam ! Combined flux in latest and established models = 4.50487 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 50 components and 4.50487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311729Jy sigma=0.001895 ! Fit after self-cal, rms=0.306053Jy sigma=0.001864 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.95 KP 1.00* ! LA 1.00* MK 1.00* NL 0.94 OV 1.00* ! PT 1.00* SC 1.06 ! ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.00 KP 1.00* ! LA 1.00* MK 1.00* NL 1.08 OV 1.00* ! PT 1.00* SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.306053Jy sigma=0.001864 ! Fit after self-cal, rms=0.157160Jy sigma=0.000900 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.007 mas, bmaj=11.78 mas, bpa=32.61 degrees ! Estimated noise=15511.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127793 Jy ! Component: 100 - total flux cleaned = 0.00814424 Jy ! Component: 150 - total flux cleaned = 0.0189881 Jy ! Component: 200 - total flux cleaned = 0.0304212 Jy ! Total flux subtracted in 200 components = 0.0304212 Jy ! Clean residual min=-0.032986 max=0.034233 Jy/beam ! Clean residual mean=-0.000018 rms=0.010162 Jy/beam ! Combined flux in latest and established models = 4.53529 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 81 components and 4.53529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117857Jy sigma=0.000700 ! Fit after self-cal, rms=0.111700Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111700Jy sigma=0.000659 ! Fit after self-cal, rms=0.109494Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.007 mas, bmaj=11.78 mas, bpa=32.61 degrees ! Estimated noise=15492.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000559849 Jy ! Component: 100 - total flux cleaned = -0.000606735 Jy ! Component: 150 - total flux cleaned = -0.00190791 Jy ! Component: 200 - total flux cleaned = -0.00455661 Jy ! Total flux subtracted in 200 components = -0.00455661 Jy ! Clean residual min=-0.011776 max=0.011246 Jy/beam ! Clean residual mean=-0.000001 rms=0.003439 Jy/beam ! Combined flux in latest and established models = 4.53074 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 104 components and 4.53074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106951Jy sigma=0.000624 ! Fit after self-cal, rms=0.106691Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00028961 Jy ! Component: 100 - total flux cleaned = 0.000243727 Jy ! Component: 150 - total flux cleaned = -0.00300492 Jy ! Component: 200 - total flux cleaned = -0.00583044 Jy ! Total flux subtracted in 200 components = -0.00583044 Jy ! Clean residual min=-0.010026 max=0.010136 Jy/beam ! Clean residual mean=-0.000001 rms=0.003178 Jy/beam ! Combined flux in latest and established models = 4.52491 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 126 components and 4.52491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106082Jy sigma=0.000622 ! Fit after self-cal, rms=0.105903Jy sigma=0.000621 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105903Jy sigma=0.000621 ! Fit after self-cal, rms=0.105788Jy sigma=0.000620 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.007 mas, bmaj=11.78 mas, bpa=32.61 degrees ! Estimated noise=15489.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00217637 Jy ! Component: 100 - total flux cleaned = -0.00220612 Jy ! Component: 150 - total flux cleaned = -0.00316802 Jy ! Component: 200 - total flux cleaned = -0.00412073 Jy ! Total flux subtracted in 200 components = -0.00412073 Jy ! Clean residual min=-0.008871 max=0.008745 Jy/beam ! Clean residual mean=0.000001 rms=0.002729 Jy/beam ! Combined flux in latest and established models = 4.52079 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 135 components and 4.52079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105852Jy sigma=0.000619 ! Fit after self-cal, rms=0.105682Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.45148e-06 Jy ! Component: 100 - total flux cleaned = -1.39668e-06 Jy ! Component: 150 - total flux cleaned = -0.00316334 Jy ! Component: 200 - total flux cleaned = -0.00221681 Jy ! Total flux subtracted in 200 components = -0.00221681 Jy ! Clean residual min=-0.008586 max=0.008582 Jy/beam ! Clean residual mean=-0.000001 rms=0.002599 Jy/beam ! Combined flux in latest and established models = 4.51857 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 143 components and 4.51857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105652Jy sigma=0.000619 ! Fit after self-cal, rms=0.105505Jy sigma=0.000618 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105505Jy sigma=0.000618 ! Fit after self-cal, rms=0.105381Jy sigma=0.000618 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.868 mas, bmaj=13.16 mas, bpa=28.53 degrees ! Estimated noise=19200.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00235268 Jy ! Component: 100 - total flux cleaned = -0.00232765 Jy ! Component: 150 - total flux cleaned = 0.000786349 Jy ! Component: 200 - total flux cleaned = 0.00629558 Jy ! Total flux subtracted in 200 components = 0.00629558 Jy ! Clean residual min=-0.011538 max=0.011425 Jy/beam ! Clean residual mean=-0.000001 rms=0.003461 Jy/beam ! Combined flux in latest and established models = 4.52486 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 152 components and 4.52486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105454Jy sigma=0.000617 ! Fit after self-cal, rms=0.105334Jy sigma=0.000616 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00172151 Jy ! Component: 100 - total flux cleaned = -0.00277774 Jy ! Component: 150 - total flux cleaned = -0.00528432 Jy ! Component: 200 - total flux cleaned = -0.0102293 Jy ! Total flux subtracted in 200 components = -0.0102293 Jy ! Clean residual min=-0.007511 max=0.007243 Jy/beam ! Clean residual mean=0.000001 rms=0.002644 Jy/beam ! Combined flux in latest and established models = 4.51463 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 171 components and 4.51463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104773Jy sigma=0.000614 ! Fit after self-cal, rms=0.104745Jy sigma=0.000613 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=11.78 mas, bpa=32.61 degrees ! Estimated noise=15485.9 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.006 x 11.78 at 32.61 degrees (North through East) ! Clean map min=-0.18592 max=4.0543 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104745Jy sigma=0.000613 ! Fit after self-cal, rms=0.078796Jy sigma=0.000430 ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=11.78 mas, bpa=32.62 degrees ! Estimated noise=15483.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00172425 Jy ! Component: 100 - total flux cleaned = -0.00148389 Jy ! Component: 150 - total flux cleaned = -0.00124085 Jy ! Component: 200 - total flux cleaned = -0.00171935 Jy ! Total flux subtracted in 200 components = -0.00171935 Jy ! Clean residual min=-0.004351 max=0.004474 Jy/beam ! Clean residual mean=0.000000 rms=0.001434 Jy/beam ! Combined flux in latest and established models = 4.51291 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 181 components and 4.51291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078841Jy sigma=0.000429 ! Fit after self-cal, rms=0.078796Jy sigma=0.000429 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000320013 Jy ! Component: 100 - total flux cleaned = -0.000313183 Jy ! Component: 150 - total flux cleaned = -0.000307128 Jy ! Component: 200 - total flux cleaned = 0.000200336 Jy ! Total flux subtracted in 200 components = 0.000200336 Jy ! Clean residual min=-0.004576 max=0.004443 Jy/beam ! Clean residual mean=-0.000000 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 4.51311 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 191 components and 4.51311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078780Jy sigma=0.000429 ! Fit after self-cal, rms=0.078715Jy sigma=0.000429 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078715Jy sigma=0.000429 ! Fit after self-cal, rms=0.078694Jy sigma=0.000429 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=11.28 mas, bpa=33.68 degrees ! Estimated noise=16323.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.45928 Jy ! Component: 100 - total flux cleaned = 4.25605 Jy ! Component: 150 - total flux cleaned = 4.38649 Jy ! Component: 200 - total flux cleaned = 4.34787 Jy ! Total flux subtracted in 200 components = 4.34787 Jy ! Clean residual min=-0.154314 max=0.154531 Jy/beam ! Clean residual mean=-0.000026 rms=0.043832 Jy/beam ! Combined flux in latest and established models = 4.34787 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 4.34787 Jy ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=11.78 mas, bpa=32.62 degrees ! Estimated noise=15482.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0887834 Jy ! Component: 100 - total flux cleaned = 0.118193 Jy ! Component: 150 - total flux cleaned = 0.112682 Jy ! Component: 200 - total flux cleaned = 0.102798 Jy ! Total flux subtracted in 200 components = 0.102798 Jy ! Clean residual min=-0.040331 max=0.039744 Jy/beam ! Clean residual mean=-0.000033 rms=0.013618 Jy/beam ! Combined flux in latest and established models = 4.45067 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 62 components and 4.45067 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.867 mas, bmaj=13.15 mas, bpa=28.55 degrees ! Estimated noise=19204.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0104236 Jy ! Component: 100 - total flux cleaned = -0.0279908 Jy ! Component: 150 - total flux cleaned = -0.0398955 Jy ! Component: 200 - total flux cleaned = -0.041865 Jy ! Total flux subtracted in 200 components = -0.041865 Jy ! Clean residual min=-0.015568 max=0.015694 Jy/beam ! Clean residual mean=-0.000034 rms=0.006184 Jy/beam ! Combined flux in latest and established models = 4.40881 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013045 Jy ! Component: 100 - total flux cleaned = 0.0273757 Jy ! Component: 150 - total flux cleaned = 0.0444025 Jy ! Component: 200 - total flux cleaned = 0.0628183 Jy ! Total flux subtracted in 200 components = 0.0628183 Jy ! Clean residual min=-0.018550 max=0.018690 Jy/beam ! Clean residual mean=-0.000042 rms=0.006946 Jy/beam ! Combined flux in latest and established models = 4.47162 Jy ! Adding 107 model components to the UV plane model. ! The established model now contains 167 components and 4.47162 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=11.78 mas, bpa=32.62 degrees ! Estimated noise=15482.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00515621 Jy ! Component: 100 - total flux cleaned = -0.0062135 Jy ! Component: 150 - total flux cleaned = -0.00672637 Jy ! Component: 200 - total flux cleaned = -0.00924745 Jy ! Total flux subtracted in 200 components = -0.00924745 Jy ! Clean residual min=-0.008493 max=0.008398 Jy/beam ! Clean residual mean=0.000009 rms=0.002317 Jy/beam ! Combined flux in latest and established models = 4.46238 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 203 components and 4.46238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079264Jy sigma=0.000433 ! Fit after self-cal, rms=0.079166Jy sigma=0.000433 wmodel J1512-0905_S_2017_05_27_pus_map.mod ! Writing 203 model components to file: J1512-0905_S_2017_05_27_pus_map.mod wobs J1512-0905_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1512-0905_S_2017_05_27_pus_uvs.fits wwins J1512-0905_S_2017_05_27_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1512-0905_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.006 x 11.78 at 32.62 degrees (North through East) ! Clean map min=-0.099701 max=3.8322 Jy/beam ! Writing clean map to FITS file: J1512-0905_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.83215 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00203614 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.159399 0.159399 0.318799 0.637597 1.27519 2.55039 5.10078 10.2016 20.4031 40.8062 81.6124 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0061 print "peak=",int(1000*peak_flux)/1000 ! peak= 3.832 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.006 x 11.78 at 32.62 degrees (North through East) ! Clean map min=-0.099701 max=3.8322 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1512-0905_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:09:55 2019