! Started logfile: J1512-0905_S_2017_05_01_pus_uvs.log on Wed May 1 18:39:07 2019 obs J1512-0905_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1512-0905_S_2017_05_01_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.582222 visibilities/baseline/integration-bin. ! Found source: J1512-0905 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 1048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1512-0905_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=4.098052Jy sigma=0.026432 ! Fit after self-cal, rms=4.094867Jy sigma=0.026405 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.827 mas, bmaj=11.77 mas, bpa=-15.53 degrees ! Estimated noise=4320.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.77628 Jy ! Component: 100 - total flux cleaned = 4.59978 Jy ! Total flux subtracted in 100 components = 4.59978 Jy ! Clean residual min=-0.266416 max=0.408994 Jy/beam ! Clean residual mean=0.000007 rms=0.091086 Jy/beam ! Combined flux in latest and established models = 4.59978 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 4.59978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.979965Jy sigma=0.005485 ! Fit after self-cal, rms=0.979962Jy sigma=0.005485 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.728 mas, bmaj=11.85 mas, bpa=-11.95 degrees ! Estimated noise=3643.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.258164 Jy ! Component: 100 - total flux cleaned = 0.331907 Jy ! Component: 150 - total flux cleaned = 0.35125 Jy ! Component: 200 - total flux cleaned = 0.360073 Jy ! Total flux subtracted in 200 components = 0.360073 Jy ! Clean residual min=-0.280233 max=0.298398 Jy/beam ! Clean residual mean=0.000226 rms=0.071950 Jy/beam ! Combined flux in latest and established models = 4.95985 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 4.95985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.882880Jy sigma=0.005122 ! Fit after self-cal, rms=0.882781Jy sigma=0.005121 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.84 HN 1.00* KP 1.01 ! LA 0.99 MK 1.00 NL 0.95 OV 1.02 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.89 HN 1.00* KP 0.97 ! LA 0.95 MK 1.00 NL 1.20 OV 1.04 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.93 HN 1.00* KP 0.99 ! LA 0.97 MK 1.04 NL 1.48 OV 0.95 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.57 HN 1.00* KP 1.00* ! LA 1.00* MK 0.95 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.882781Jy sigma=0.005121 ! Fit after self-cal, rms=0.143193Jy sigma=0.000966 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.723 mas, bmaj=11.73 mas, bpa=-11.15 degrees ! Estimated noise=3622.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-42, 32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0534473 Jy ! Component: 100 - total flux cleaned = 0.0612339 Jy ! Component: 150 - total flux cleaned = 0.060657 Jy ! Component: 200 - total flux cleaned = 0.0599946 Jy ! Total flux subtracted in 200 components = 0.0599946 Jy ! Clean residual min=-0.019779 max=0.025259 Jy/beam ! Clean residual mean=0.000032 rms=0.005889 Jy/beam ! Combined flux in latest and established models = 5.01985 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 50 components and 5.01985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114816Jy sigma=0.000763 ! Fit after self-cal, rms=0.114205Jy sigma=0.000757 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114205Jy sigma=0.000757 ! Fit after self-cal, rms=0.112583Jy sigma=0.000744 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.717 mas, bmaj=11.71 mas, bpa=-11.17 degrees ! Estimated noise=3620.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165152 Jy ! Component: 100 - total flux cleaned = 0.0161843 Jy ! Component: 150 - total flux cleaned = 0.0154946 Jy ! Component: 200 - total flux cleaned = 0.0145411 Jy ! Total flux subtracted in 200 components = 0.0145411 Jy ! Clean residual min=-0.016639 max=0.017601 Jy/beam ! Clean residual mean=0.000036 rms=0.004392 Jy/beam ! Combined flux in latest and established models = 5.03439 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 73 components and 5.03439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109154Jy sigma=0.000718 ! Fit after self-cal, rms=0.109149Jy sigma=0.000717 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112184 Jy ! Component: 100 - total flux cleaned = -0.00114397 Jy ! Component: 150 - total flux cleaned = -0.00159942 Jy ! Component: 200 - total flux cleaned = -0.0015889 Jy ! Total flux subtracted in 200 components = -0.0015889 Jy ! Clean residual min=-0.016153 max=0.015526 Jy/beam ! Clean residual mean=0.000035 rms=0.004088 Jy/beam ! Combined flux in latest and established models = 5.0328 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 85 components and 5.0328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108277Jy sigma=0.000711 ! Fit after self-cal, rms=0.108280Jy sigma=0.000711 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108280Jy sigma=0.000711 ! Fit after self-cal, rms=0.108152Jy sigma=0.000710 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.715 mas, bmaj=11.71 mas, bpa=-11.17 degrees ! Estimated noise=3619.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00531234 Jy ! Component: 100 - total flux cleaned = 0.00513199 Jy ! Component: 150 - total flux cleaned = 0.00496465 Jy ! Component: 200 - total flux cleaned = 0.00481507 Jy ! Total flux subtracted in 200 components = 0.00481507 Jy ! Clean residual min=-0.015571 max=0.014132 Jy/beam ! Clean residual mean=0.000036 rms=0.003838 Jy/beam ! Combined flux in latest and established models = 5.03761 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 101 components and 5.03761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107647Jy sigma=0.000706 ! Fit after self-cal, rms=0.107644Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269616 Jy ! Component: 100 - total flux cleaned = -0.000270061 Jy ! Component: 150 - total flux cleaned = -0.000394948 Jy ! Component: 200 - total flux cleaned = -0.000517112 Jy ! Total flux subtracted in 200 components = -0.000517112 Jy ! Clean residual min=-0.015205 max=0.013632 Jy/beam ! Clean residual mean=0.000037 rms=0.003742 Jy/beam ! Combined flux in latest and established models = 5.0371 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 108 components and 5.0371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107369Jy sigma=0.000704 ! Fit after self-cal, rms=0.107368Jy sigma=0.000704 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107368Jy sigma=0.000704 ! Fit after self-cal, rms=0.107349Jy sigma=0.000703 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.085 mas, bmaj=15.11 mas, bpa=14.83 degrees ! Estimated noise=4185.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101418 Jy ! Component: 100 - total flux cleaned = 0.000781122 Jy ! Component: 150 - total flux cleaned = 0.000684305 Jy ! Component: 200 - total flux cleaned = 0.000771102 Jy ! Total flux subtracted in 200 components = 0.000771102 Jy ! Clean residual min=-0.017956 max=0.017756 Jy/beam ! Clean residual mean=0.000061 rms=0.004808 Jy/beam ! Combined flux in latest and established models = 5.03787 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 129 components and 5.03787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107217Jy sigma=0.000703 ! Fit after self-cal, rms=0.107198Jy sigma=0.000703 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128718 Jy ! Component: 100 - total flux cleaned = -5.01804e-05 Jy ! Component: 150 - total flux cleaned = -5.26151e-05 Jy ! Component: 200 - total flux cleaned = -0.000130757 Jy ! Total flux subtracted in 200 components = -0.000130757 Jy ! Clean residual min=-0.017865 max=0.017429 Jy/beam ! Clean residual mean=0.000061 rms=0.004747 Jy/beam ! Combined flux in latest and established models = 5.03774 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 135 components and 5.03774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107100Jy sigma=0.000702 ! Fit after self-cal, rms=0.107095Jy sigma=0.000702 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.714 mas, bmaj=11.71 mas, bpa=-11.17 degrees ! Estimated noise=3620.72 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.714 x 11.71 at -11.17 degrees (North through East) ! Clean map min=-0.025555 max=4.7608 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107095Jy sigma=0.000702 ! Fit after self-cal, rms=0.093505Jy sigma=0.000609 ! Inverting map and beam ! Estimated beam: bmin=4.713 mas, bmaj=11.71 mas, bpa=-11.18 degrees ! Estimated noise=3620.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102825 Jy ! Component: 100 - total flux cleaned = 0.00103808 Jy ! Component: 150 - total flux cleaned = 0.000940513 Jy ! Component: 200 - total flux cleaned = 0.000938788 Jy ! Total flux subtracted in 200 components = 0.000938788 Jy ! Clean residual min=-0.014233 max=0.012757 Jy/beam ! Clean residual mean=0.000038 rms=0.003530 Jy/beam ! Combined flux in latest and established models = 5.03868 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 143 components and 5.03867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093289Jy sigma=0.000608 ! Fit after self-cal, rms=0.093292Jy sigma=0.000608 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.02047e-05 Jy ! Component: 100 - total flux cleaned = -5.98873e-05 Jy ! Component: 150 - total flux cleaned = -0.000226091 Jy ! Component: 200 - total flux cleaned = -0.000385717 Jy ! Total flux subtracted in 200 components = -0.000385717 Jy ! Clean residual min=-0.014009 max=0.012617 Jy/beam ! Clean residual mean=0.000038 rms=0.003495 Jy/beam ! Combined flux in latest and established models = 5.03829 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 151 components and 5.03829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093149Jy sigma=0.000607 ! Fit after self-cal, rms=0.093150Jy sigma=0.000607 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093150Jy sigma=0.000607 ! Fit after self-cal, rms=0.093131Jy sigma=0.000607 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.835 mas, bmaj=11.53 mas, bpa=-14.75 degrees ! Estimated noise=4313.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.77052 Jy ! Component: 100 - total flux cleaned = 4.59274 Jy ! Component: 150 - total flux cleaned = 4.79933 Jy ! Component: 200 - total flux cleaned = 4.89457 Jy ! Total flux subtracted in 200 components = 4.89457 Jy ! Clean residual min=-0.030781 max=0.047638 Jy/beam ! Clean residual mean=0.000038 rms=0.011269 Jy/beam ! Combined flux in latest and established models = 4.89457 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 4.89457 Jy ! Inverting map and beam ! Estimated beam: bmin=4.713 mas, bmaj=11.71 mas, bpa=-11.18 degrees ! Estimated noise=3621.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0606548 Jy ! Component: 100 - total flux cleaned = 0.0960187 Jy ! Component: 150 - total flux cleaned = 0.114016 Jy ! Component: 200 - total flux cleaned = 0.122094 Jy ! Total flux subtracted in 200 components = 0.122094 Jy ! Clean residual min=-0.016977 max=0.017232 Jy/beam ! Clean residual mean=0.000065 rms=0.004948 Jy/beam ! Combined flux in latest and established models = 5.01666 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 63 components and 5.01666 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.083 mas, bmaj=15.11 mas, bpa=14.82 degrees ! Estimated noise=4187.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145882 Jy ! Component: 100 - total flux cleaned = 0.0169744 Jy ! Component: 150 - total flux cleaned = 0.0176332 Jy ! Component: 200 - total flux cleaned = 0.0182294 Jy ! Total flux subtracted in 200 components = 0.0182294 Jy ! Clean residual min=-0.014967 max=0.018691 Jy/beam ! Clean residual mean=0.000082 rms=0.005455 Jy/beam ! Combined flux in latest and established models = 5.03489 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000544089 Jy ! Component: 100 - total flux cleaned = 0.000787539 Jy ! Component: 150 - total flux cleaned = 0.00100101 Jy ! Component: 200 - total flux cleaned = 0.000999735 Jy ! Total flux subtracted in 200 components = 0.000999735 Jy ! Clean residual min=-0.014617 max=0.017779 Jy/beam ! Clean residual mean=0.000082 rms=0.005022 Jy/beam ! Combined flux in latest and established models = 5.03589 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 88 components and 5.03589 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.713 mas, bmaj=11.71 mas, bpa=-11.18 degrees ! Estimated noise=3621.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000238284 Jy ! Component: 100 - total flux cleaned = 0.000413111 Jy ! Component: 150 - total flux cleaned = 0.00111758 Jy ! Component: 200 - total flux cleaned = 0.00188085 Jy ! Total flux subtracted in 200 components = 0.00188085 Jy ! Clean residual min=-0.013801 max=0.013108 Jy/beam ! Clean residual mean=0.000053 rms=0.003704 Jy/beam ! Combined flux in latest and established models = 5.03777 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 102 components and 5.03777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093732Jy sigma=0.000611 ! Fit after self-cal, rms=0.093407Jy sigma=0.000609 wmodel J1512-0905_S_2017_05_01_pus_map.mod ! Writing 102 model components to file: J1512-0905_S_2017_05_01_pus_map.mod wobs J1512-0905_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1512-0905_S_2017_05_01_pus_uvs.fits wwins J1512-0905_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J1512-0905_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420921 Jy ! Component: 100 - total flux cleaned = 0.00140911 Jy ! Component: 150 - total flux cleaned = 0.00140544 Jy ! Component: 200 - total flux cleaned = 0.000920345 Jy ! Component: 250 - total flux cleaned = 0.000917785 Jy ! Component: 300 - total flux cleaned = 0.00176659 Jy ! Component: 350 - total flux cleaned = 0.0025654 Jy ! Component: 400 - total flux cleaned = 0.00306712 Jy ! Component: 450 - total flux cleaned = 0.00342617 Jy ! Component: 500 - total flux cleaned = 0.00376119 Jy ! Component: 550 - total flux cleaned = 0.00354119 Jy ! Component: 600 - total flux cleaned = 0.00323286 Jy ! Component: 650 - total flux cleaned = 0.00274216 Jy ! Component: 700 - total flux cleaned = 0.00236851 Jy ! Component: 750 - total flux cleaned = 0.00201 Jy ! Component: 800 - total flux cleaned = 0.00141098 Jy ! Component: 850 - total flux cleaned = 0.000917072 Jy ! Component: 900 - total flux cleaned = 0.000278527 Jy ! Component: 950 - total flux cleaned = -0.000257722 Jy ! Component: 1000 - total flux cleaned = -0.00092482 Jy ! Component: 1050 - total flux cleaned = -0.00142382 Jy ! Component: 1100 - total flux cleaned = -0.00204898 Jy ! Component: 1150 - total flux cleaned = -0.00238759 Jy ! Component: 1200 - total flux cleaned = -0.0025865 Jy ! Component: 1250 - total flux cleaned = -0.00296939 Jy ! Component: 1300 - total flux cleaned = -0.00290524 Jy ! Component: 1350 - total flux cleaned = -0.00284492 Jy ! Component: 1400 - total flux cleaned = -0.00296446 Jy ! Component: 1450 - total flux cleaned = -0.00278994 Jy ! Component: 1500 - total flux cleaned = -0.00273296 Jy ! Component: 1550 - total flux cleaned = -0.0026202 Jy ! Component: 1600 - total flux cleaned = -0.00223885 Jy ! Component: 1650 - total flux cleaned = -0.00202573 Jy ! Component: 1700 - total flux cleaned = -0.00176378 Jy ! Component: 1750 - total flux cleaned = -0.00160853 Jy ! Component: 1800 - total flux cleaned = -0.00140375 Jy ! Component: 1850 - total flux cleaned = -0.00115198 Jy ! Component: 1900 - total flux cleaned = -0.0010028 Jy ! Component: 1950 - total flux cleaned = -0.000758304 Jy ! Component: 2000 - total flux cleaned = -0.000661503 Jy ! Component: 2050 - total flux cleaned = -0.000469391 Jy ! Component: 2100 - total flux cleaned = -0.000279695 Jy ! Component: 2150 - total flux cleaned = -4.48415e-05 Jy ! Component: 2200 - total flux cleaned = 0.000233632 Jy ! Component: 2250 - total flux cleaned = 0.000325723 Jy ! Component: 2300 - total flux cleaned = 0.000508645 Jy ! Component: 2350 - total flux cleaned = 0.000599499 Jy ! Component: 2400 - total flux cleaned = 0.000644463 Jy ! Component: 2450 - total flux cleaned = 0.000734014 Jy ! Component: 2500 - total flux cleaned = 0.000689433 Jy ! Component: 2550 - total flux cleaned = 0.00064493 Jy ! Component: 2600 - total flux cleaned = 0.000556277 Jy ! Component: 2650 - total flux cleaned = 0.000423487 Jy ! Component: 2700 - total flux cleaned = 0.000379326 Jy ! Component: 2750 - total flux cleaned = 0.000290977 Jy ! Component: 2800 - total flux cleaned = 0.00029085 Jy ! Component: 2850 - total flux cleaned = 0.000114526 Jy ! Component: 2900 - total flux cleaned = 7.03271e-05 Jy ! Component: 2950 - total flux cleaned = -1.8244e-05 Jy ! Component: 3000 - total flux cleaned = -0.000151956 Jy ! Component: 3050 - total flux cleaned = -0.000196772 Jy ! Component: 3100 - total flux cleaned = -0.000331974 Jy ! Component: 3150 - total flux cleaned = -0.000467611 Jy ! Component: 3200 - total flux cleaned = -0.000740984 Jy ! Component: 3250 - total flux cleaned = -0.000924614 Jy ! Component: 3300 - total flux cleaned = -0.00115578 Jy ! Component: 3350 - total flux cleaned = -0.00138857 Jy ! Component: 3400 - total flux cleaned = -0.0016233 Jy ! Component: 3450 - total flux cleaned = -0.00181289 Jy ! Component: 3500 - total flux cleaned = -0.00190861 Jy ! Component: 3550 - total flux cleaned = -0.00205274 Jy ! Component: 3600 - total flux cleaned = -0.00219907 Jy ! Component: 3650 - total flux cleaned = -0.00224804 Jy ! Component: 3700 - total flux cleaned = -0.00239689 Jy ! Component: 3750 - total flux cleaned = -0.00249744 Jy ! Component: 3800 - total flux cleaned = -0.00249819 Jy ! Component: 3850 - total flux cleaned = -0.00270342 Jy ! Component: 3900 - total flux cleaned = -0.00285935 Jy ! Component: 3950 - total flux cleaned = -0.00301734 Jy ! Component: 4000 - total flux cleaned = -0.00317742 Jy ! Component: 4050 - total flux cleaned = -0.00328517 Jy ! Total flux subtracted in 4096 components = -0.00344962 Jy ! Clean residual min=-0.003297 max=0.003115 Jy/beam ! Clean residual mean=0.000016 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 5.03432 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 406 components and 5.03432 Jy ![Exited script file: muppet] wmap "J1512-0905_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.713 x 11.71 at -11.18 degrees (North through East) ! Clean map min=-0.011425 max=4.8296 Jy/beam ! Writing clean map to FITS file: J1512-0905_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 4.82956 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00110318 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0685264 0.0685264 0.137053 0.274106 0.548211 1.09642 2.19284 4.38569 8.77138 17.5428 35.0855 70.171 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(1000*peak_flux)/1000 ! peak= 4.829 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.713 x 11.71 at -11.18 degrees (North through East) ! Clean map min=-0.011425 max=4.8296 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1512-0905_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:39:11 2019