! Started logfile: J1512-0905_S_2017_02_24_pus_uvs.log on Sat May 4 11:29:15 2019 obs J1512-0905_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1512-0905_S_2017_02_24_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.436111 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1512-0905 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 628 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1512-0905_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=3.752237Jy sigma=0.029604 ! Fit after self-cal, rms=3.730516Jy sigma=0.029428 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.159 mas, bmaj=17.48 mas, bpa=-32.01 degrees ! Estimated noise=4559.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.66009 Jy ! Component: 100 - total flux cleaned = 4.45823 Jy ! Total flux subtracted in 100 components = 4.45823 Jy ! Clean residual min=-0.097902 max=0.222586 Jy/beam ! Clean residual mean=0.001281 rms=0.047564 Jy/beam ! Combined flux in latest and established models = 4.45823 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 4.45823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.407596Jy sigma=0.002984 ! Fit after self-cal, rms=0.407596Jy sigma=0.002984 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.21 mas, bmaj=18.4 mas, bpa=-26.51 degrees ! Estimated noise=3834.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.184984 Jy ! Component: 100 - total flux cleaned = 0.211411 Jy ! Component: 150 - total flux cleaned = 0.211444 Jy ! Component: 200 - total flux cleaned = 0.211454 Jy ! Total flux subtracted in 200 components = 0.211454 Jy ! Clean residual min=-0.069130 max=0.091689 Jy/beam ! Clean residual mean=0.000616 rms=0.024010 Jy/beam ! Combined flux in latest and established models = 4.66968 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 4.66968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303354Jy sigma=0.002317 ! Fit after self-cal, rms=0.303296Jy sigma=0.002317 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.08 HN 1.00* KP 0.99 ! LA 0.97 MK 1.00* NL 0.99 OV 1.03 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.00* KP 0.93 ! LA 0.93 MK 1.00* NL 0.95 OV 1.07 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.00* KP 1.02 ! LA 1.01 MK 1.00* NL 1.05 OV 0.97 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 HN 1.00* KP 1.00* ! LA 0.93 MK 1.00* NL 1.00* OV 1.00 ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.303296Jy sigma=0.002317 ! Fit after self-cal, rms=0.088389Jy sigma=0.000692 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.19 mas, bmaj=18.51 mas, bpa=-26.46 degrees ! Estimated noise=3826.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00204576 Jy ! Component: 100 - total flux cleaned = -0.00230967 Jy ! Component: 150 - total flux cleaned = -0.00233138 Jy ! Component: 200 - total flux cleaned = -0.00233219 Jy ! Total flux subtracted in 200 components = -0.00233219 Jy ! Clean residual min=-0.012993 max=0.015781 Jy/beam ! Clean residual mean=0.000048 rms=0.004393 Jy/beam ! Combined flux in latest and established models = 4.66735 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 62 components and 4.66735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086648Jy sigma=0.000681 ! Fit after self-cal, rms=0.086596Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086596Jy sigma=0.000680 ! Fit after self-cal, rms=0.086264Jy sigma=0.000678 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.19 mas, bmaj=18.52 mas, bpa=-26.47 degrees ! Estimated noise=3827.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000751203 Jy ! Component: 100 - total flux cleaned = 0.000528209 Jy ! Component: 150 - total flux cleaned = 0.000516775 Jy ! Component: 200 - total flux cleaned = 0.000654447 Jy ! Total flux subtracted in 200 components = 0.000654447 Jy ! Clean residual min=-0.011980 max=0.013758 Jy/beam ! Clean residual mean=0.000049 rms=0.003926 Jy/beam ! Combined flux in latest and established models = 4.668 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 4.668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085449Jy sigma=0.000673 ! Fit after self-cal, rms=0.085438Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.40653e-05 Jy ! Component: 100 - total flux cleaned = 0.000320541 Jy ! Component: 150 - total flux cleaned = 0.000623642 Jy ! Component: 200 - total flux cleaned = 0.00080728 Jy ! Total flux subtracted in 200 components = 0.00080728 Jy ! Clean residual min=-0.012066 max=0.013397 Jy/beam ! Clean residual mean=0.000054 rms=0.003830 Jy/beam ! Combined flux in latest and established models = 4.66881 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 79 components and 4.66881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085166Jy sigma=0.000671 ! Fit after self-cal, rms=0.085160Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085160Jy sigma=0.000671 ! Fit after self-cal, rms=0.084919Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.19 mas, bmaj=18.52 mas, bpa=-26.48 degrees ! Estimated noise=3826.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107308 Jy ! Component: 100 - total flux cleaned = 0.00119611 Jy ! Component: 150 - total flux cleaned = 0.00118855 Jy ! Component: 200 - total flux cleaned = 0.00128063 Jy ! Total flux subtracted in 200 components = 0.00128063 Jy ! Clean residual min=-0.011186 max=0.011847 Jy/beam ! Clean residual mean=0.000048 rms=0.003529 Jy/beam ! Combined flux in latest and established models = 4.67009 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 81 components and 4.67009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084582Jy sigma=0.000668 ! Fit after self-cal, rms=0.084581Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.28071e-05 Jy ! Component: 100 - total flux cleaned = 0.000288493 Jy ! Component: 150 - total flux cleaned = 0.000483257 Jy ! Component: 200 - total flux cleaned = 0.000663746 Jy ! Total flux subtracted in 200 components = 0.000663746 Jy ! Clean residual min=-0.011213 max=0.011591 Jy/beam ! Clean residual mean=0.000051 rms=0.003487 Jy/beam ! Combined flux in latest and established models = 4.67076 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 4.67076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084470Jy sigma=0.000667 ! Fit after self-cal, rms=0.084468Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084468Jy sigma=0.000667 ! Fit after self-cal, rms=0.084367Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.78 mas, bmaj=18.71 mas, bpa=-28.35 degrees ! Estimated noise=3863.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000991246 Jy ! Component: 100 - total flux cleaned = 0.00106951 Jy ! Component: 150 - total flux cleaned = 0.00119407 Jy ! Component: 200 - total flux cleaned = 0.00136826 Jy ! Total flux subtracted in 200 components = 0.00136826 Jy ! Clean residual min=-0.010699 max=0.011388 Jy/beam ! Clean residual mean=0.000056 rms=0.003671 Jy/beam ! Combined flux in latest and established models = 4.67212 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 99 components and 4.67212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084233Jy sigma=0.000665 ! Fit after self-cal, rms=0.084233Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159856 Jy ! Component: 100 - total flux cleaned = 0.000360197 Jy ! Component: 150 - total flux cleaned = 0.000605016 Jy ! Component: 200 - total flux cleaned = 0.000796578 Jy ! Total flux subtracted in 200 components = 0.000796578 Jy ! Clean residual min=-0.010673 max=0.011105 Jy/beam ! Clean residual mean=0.000059 rms=0.003644 Jy/beam ! Combined flux in latest and established models = 4.67292 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 108 components and 4.67292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084178Jy sigma=0.000665 ! Fit after self-cal, rms=0.084177Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=10.19 mas, bmaj=18.52 mas, bpa=-26.49 degrees ! Estimated noise=3826.46 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.19 x 18.52 at -26.49 degrees (North through East) ! Clean map min=-0.012364 max=4.6762 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084177Jy sigma=0.000665 ! Fit after self-cal, rms=0.074293Jy sigma=0.000584 ! Inverting map and beam ! Estimated beam: bmin=10.19 mas, bmaj=18.52 mas, bpa=-26.49 degrees ! Estimated noise=3825.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000812418 Jy ! Component: 100 - total flux cleaned = 0.000888482 Jy ! Component: 150 - total flux cleaned = 0.00094787 Jy ! Component: 200 - total flux cleaned = 0.00100625 Jy ! Total flux subtracted in 200 components = 0.00100625 Jy ! Clean residual min=-0.010620 max=0.010845 Jy/beam ! Clean residual mean=0.000051 rms=0.003279 Jy/beam ! Combined flux in latest and established models = 4.67393 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 113 components and 4.67393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074171Jy sigma=0.000584 ! Fit after self-cal, rms=0.074170Jy sigma=0.000584 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.29777e-05 Jy ! Component: 100 - total flux cleaned = 0.000353243 Jy ! Component: 150 - total flux cleaned = 0.000602709 Jy ! Component: 200 - total flux cleaned = 0.000796007 Jy ! Total flux subtracted in 200 components = 0.000796007 Jy ! Clean residual min=-0.010565 max=0.010603 Jy/beam ! Clean residual mean=0.000054 rms=0.003250 Jy/beam ! Combined flux in latest and established models = 4.67472 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 118 components and 4.67472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074107Jy sigma=0.000583 ! Fit after self-cal, rms=0.074106Jy sigma=0.000583 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074106Jy sigma=0.000583 ! Fit after self-cal, rms=0.074084Jy sigma=0.000583 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.204 mas, bmaj=17.56 mas, bpa=-31.96 degrees ! Estimated noise=4572.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.6552 Jy ! Component: 100 - total flux cleaned = 4.45227 Jy ! Component: 150 - total flux cleaned = 4.62609 Jy ! Component: 200 - total flux cleaned = 4.66652 Jy ! Total flux subtracted in 200 components = 4.66652 Jy ! Clean residual min=-0.017470 max=0.015906 Jy/beam ! Clean residual mean=0.000099 rms=0.005558 Jy/beam ! Combined flux in latest and established models = 4.66652 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 4.66652 Jy ! Inverting map and beam ! Estimated beam: bmin=10.19 mas, bmaj=18.52 mas, bpa=-26.49 degrees ! Estimated noise=3825.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153138 Jy ! Component: 100 - total flux cleaned = 0.0196055 Jy ! Component: 150 - total flux cleaned = 0.0218836 Jy ! Component: 200 - total flux cleaned = 0.0225632 Jy ! Total flux subtracted in 200 components = 0.0225632 Jy ! Clean residual min=-0.008785 max=0.010906 Jy/beam ! Clean residual mean=0.000098 rms=0.003374 Jy/beam ! Combined flux in latest and established models = 4.68908 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 48 components and 4.68908 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.78 mas, bmaj=18.71 mas, bpa=-28.35 degrees ! Estimated noise=3862.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.22989e-05 Jy ! Component: 100 - total flux cleaned = -4.24168e-05 Jy ! Component: 150 - total flux cleaned = 0.000214766 Jy ! Component: 200 - total flux cleaned = 0.000318105 Jy ! Total flux subtracted in 200 components = 0.000318105 Jy ! Clean residual min=-0.009133 max=0.011172 Jy/beam ! Clean residual mean=0.000095 rms=0.003475 Jy/beam ! Combined flux in latest and established models = 4.6894 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.59781e-05 Jy ! Component: 100 - total flux cleaned = 8.68491e-05 Jy ! Component: 150 - total flux cleaned = 8.40393e-05 Jy ! Component: 200 - total flux cleaned = 1.95971e-05 Jy ! Total flux subtracted in 200 components = 1.95971e-05 Jy ! Clean residual min=-0.009014 max=0.011297 Jy/beam ! Clean residual mean=0.000089 rms=0.003409 Jy/beam ! Combined flux in latest and established models = 4.68942 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 107 components and 4.68942 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=10.19 mas, bmaj=18.52 mas, bpa=-26.49 degrees ! Estimated noise=3825.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0005238 Jy ! Component: 100 - total flux cleaned = 0.000723679 Jy ! Component: 150 - total flux cleaned = 0.000766257 Jy ! Component: 200 - total flux cleaned = 0.000846471 Jy ! Total flux subtracted in 200 components = 0.000846471 Jy ! Clean residual min=-0.008649 max=0.010563 Jy/beam ! Clean residual mean=0.000076 rms=0.003079 Jy/beam ! Combined flux in latest and established models = 4.69026 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 127 components and 4.69026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073834Jy sigma=0.000581 ! Fit after self-cal, rms=0.073828Jy sigma=0.000581 wmodel J1512-0905_S_2017_02_24_pus_map.mod ! Writing 127 model components to file: J1512-0905_S_2017_02_24_pus_map.mod wobs J1512-0905_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1512-0905_S_2017_02_24_pus_uvs.fits wwins J1512-0905_S_2017_02_24_pus_map.win ! wwins: Wrote 1 windows to J1512-0905_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388292 Jy ! Component: 100 - total flux cleaned = 0.0047687 Jy ! Component: 150 - total flux cleaned = 0.00579786 Jy ! Component: 200 - total flux cleaned = 0.00695705 Jy ! Component: 250 - total flux cleaned = 0.00769721 Jy ! Component: 300 - total flux cleaned = 0.00817567 Jy ! Component: 350 - total flux cleaned = 0.00861536 Jy ! Component: 400 - total flux cleaned = 0.00918123 Jy ! Component: 450 - total flux cleaned = 0.00947874 Jy ! Component: 500 - total flux cleaned = 0.00975618 Jy ! Component: 550 - total flux cleaned = 0.00994838 Jy ! Component: 600 - total flux cleaned = 0.00994878 Jy ! Component: 650 - total flux cleaned = 0.00972189 Jy ! Component: 700 - total flux cleaned = 0.00950948 Jy ! Component: 750 - total flux cleaned = 0.00935954 Jy ! Component: 800 - total flux cleaned = 0.00926312 Jy ! Component: 850 - total flux cleaned = 0.0091253 Jy ! Component: 900 - total flux cleaned = 0.00903733 Jy ! Component: 950 - total flux cleaned = 0.00890908 Jy ! Component: 1000 - total flux cleaned = 0.00874292 Jy ! Component: 1050 - total flux cleaned = 0.00853936 Jy ! Component: 1100 - total flux cleaned = 0.00834008 Jy ! Component: 1150 - total flux cleaned = 0.0081833 Jy ! Component: 1200 - total flux cleaned = 0.00795236 Jy ! Component: 1250 - total flux cleaned = 0.00772574 Jy ! Component: 1300 - total flux cleaned = 0.00753909 Jy ! Component: 1350 - total flux cleaned = 0.00742835 Jy ! Component: 1400 - total flux cleaned = 0.00735516 Jy ! Component: 1450 - total flux cleaned = 0.0073192 Jy ! Component: 1500 - total flux cleaned = 0.00728282 Jy ! Component: 1550 - total flux cleaned = 0.00728296 Jy ! Component: 1600 - total flux cleaned = 0.00721022 Jy ! Component: 1650 - total flux cleaned = 0.00713768 Jy ! Component: 1700 - total flux cleaned = 0.00713788 Jy ! Component: 1750 - total flux cleaned = 0.00706547 Jy ! Component: 1800 - total flux cleaned = 0.00702918 Jy ! Component: 1850 - total flux cleaned = 0.0069203 Jy ! Component: 1900 - total flux cleaned = 0.00688398 Jy ! Component: 1950 - total flux cleaned = 0.00681071 Jy ! Component: 2000 - total flux cleaned = 0.00677435 Jy ! Component: 2050 - total flux cleaned = 0.00677428 Jy ! Component: 2100 - total flux cleaned = 0.00673706 Jy ! Component: 2150 - total flux cleaned = 0.00670055 Jy ! Component: 2200 - total flux cleaned = 0.00658657 Jy ! Component: 2250 - total flux cleaned = 0.00647108 Jy ! Component: 2300 - total flux cleaned = 0.00635359 Jy ! Component: 2350 - total flux cleaned = 0.00623439 Jy ! Component: 2400 - total flux cleaned = 0.00611369 Jy ! Component: 2450 - total flux cleaned = 0.00599061 Jy ! Component: 2500 - total flux cleaned = 0.00582372 Jy ! Component: 2550 - total flux cleaned = 0.00573816 Jy ! Component: 2600 - total flux cleaned = 0.00569518 Jy ! Component: 2650 - total flux cleaned = 0.00560737 Jy ! Component: 2700 - total flux cleaned = 0.00551762 Jy ! Component: 2750 - total flux cleaned = 0.00542684 Jy ! Component: 2800 - total flux cleaned = 0.00533341 Jy ! Component: 2850 - total flux cleaned = 0.00523822 Jy ! Component: 2900 - total flux cleaned = 0.00518875 Jy ! Component: 2950 - total flux cleaned = 0.00508842 Jy ! Component: 3000 - total flux cleaned = 0.00503792 Jy ! Component: 3050 - total flux cleaned = 0.00493308 Jy ! Component: 3100 - total flux cleaned = 0.00487944 Jy ! Component: 3150 - total flux cleaned = 0.0047693 Jy ! Component: 3200 - total flux cleaned = 0.00471216 Jy ! Component: 3250 - total flux cleaned = 0.00465441 Jy ! Component: 3300 - total flux cleaned = 0.00453545 Jy ! Component: 3350 - total flux cleaned = 0.00447466 Jy ! Component: 3400 - total flux cleaned = 0.00435014 Jy ! Component: 3450 - total flux cleaned = 0.00428681 Jy ! Component: 3500 - total flux cleaned = 0.00421971 Jy ! Component: 3550 - total flux cleaned = 0.00421896 Jy ! Component: 3600 - total flux cleaned = 0.00414947 Jy ! Component: 3650 - total flux cleaned = 0.00407775 Jy ! Component: 3700 - total flux cleaned = 0.00400492 Jy ! Component: 3750 - total flux cleaned = 0.00392882 Jy ! Component: 3800 - total flux cleaned = 0.00400589 Jy ! Component: 3850 - total flux cleaned = 0.00392802 Jy ! Component: 3900 - total flux cleaned = 0.0039261 Jy ! Component: 3950 - total flux cleaned = 0.00392496 Jy ! Component: 4000 - total flux cleaned = 0.00392358 Jy ! Component: 4050 - total flux cleaned = 0.00401319 Jy ! Total flux subtracted in 4096 components = 0.00401462 Jy ! Clean residual min=-0.005396 max=0.004724 Jy/beam ! Clean residual mean=-0.000002 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 4.69428 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 406 components and 4.69428 Jy ![Exited script file: muppet] wmap "J1512-0905_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.19 x 18.52 at -26.49 degrees (North through East) ! Clean map min=-0.011633 max=4.6762 Jy/beam ! Writing clean map to FITS file: J1512-0905_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 4.6762 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00141588 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0908354 0.0908354 0.181671 0.363341 0.726683 1.45337 2.90673 5.81346 11.6269 23.2539 46.5077 93.0154 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0042 print "peak=",int(1000*peak_flux)/1000 ! peak= 4.676 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.19 x 18.52 at -26.49 degrees (North through East) ! Clean map min=-0.011633 max=4.6762 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1512-0905_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:29:20 2019