! Started logfile: J1512-0905_S_2017_02_19_pus_uvs.log on Sat May 4 18:53:25 2019 obs J1512-0905_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1512-0905_S_2017_02_19_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.408333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1512-0905 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 588 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1512-0905_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=3.476496Jy sigma=0.024144 ! Fit after self-cal, rms=3.471471Jy sigma=0.024120 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=10.5 mas, bpa=-14.14 degrees ! Estimated noise=4726.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.23338 Jy ! Component: 100 - total flux cleaned = 3.93978 Jy ! Total flux subtracted in 100 components = 3.93978 Jy ! Clean residual min=-0.272870 max=0.300935 Jy/beam ! Clean residual mean=0.000531 rms=0.080271 Jy/beam ! Combined flux in latest and established models = 3.93978 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 3.93978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.858468Jy sigma=0.005315 ! Fit after self-cal, rms=0.858464Jy sigma=0.005315 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.592 mas, bmaj=10.92 mas, bpa=-13.66 degrees ! Estimated noise=4487.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.317523 Jy ! Component: 100 - total flux cleaned = 0.492964 Jy ! Component: 150 - total flux cleaned = 0.605962 Jy ! Component: 200 - total flux cleaned = 0.681059 Jy ! Total flux subtracted in 200 components = 0.681059 Jy ! Clean residual min=-0.212080 max=0.187879 Jy/beam ! Clean residual mean=0.000185 rms=0.052087 Jy/beam ! Combined flux in latest and established models = 4.62084 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 59 components and 4.62084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.671748Jy sigma=0.004523 ! Fit after self-cal, rms=0.671718Jy sigma=0.004523 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.00* KP 1.06 ! LA 1.02 MK 0.96 NL 0.87 OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.06 HN 1.00* KP 1.00 ! LA 0.99 MK 0.97 NL 1.03 OV 1.07 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.08 HN 1.00* KP 0.87 ! LA 0.78 MK 0.99 NL 1.15 OV 0.97 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.25 HN 1.00* KP 1.00* ! LA 0.80 MK 1.17 NL 1.00* OV 1.01 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.671718Jy sigma=0.004523 ! Fit after self-cal, rms=0.098313Jy sigma=0.000709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=11.02 mas, bpa=-13.78 degrees ! Estimated noise=4478.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0105348 Jy ! Component: 100 - total flux cleaned = -0.0135669 Jy ! Component: 150 - total flux cleaned = -0.0152373 Jy ! Component: 200 - total flux cleaned = -0.0156159 Jy ! Total flux subtracted in 200 components = -0.0156159 Jy ! Clean residual min=-0.018643 max=0.021231 Jy/beam ! Clean residual mean=0.000026 rms=0.005297 Jy/beam ! Combined flux in latest and established models = 4.60522 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 68 components and 4.60522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096345Jy sigma=0.000689 ! Fit after self-cal, rms=0.096176Jy sigma=0.000688 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096176Jy sigma=0.000688 ! Fit after self-cal, rms=0.095586Jy sigma=0.000685 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=11.03 mas, bpa=-13.79 degrees ! Estimated noise=4477.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0076199 Jy ! Component: 100 - total flux cleaned = -0.00967365 Jy ! Component: 150 - total flux cleaned = -0.0111624 Jy ! Component: 200 - total flux cleaned = -0.0119217 Jy ! Total flux subtracted in 200 components = -0.0119217 Jy ! Clean residual min=-0.017705 max=0.019574 Jy/beam ! Clean residual mean=0.000026 rms=0.004890 Jy/beam ! Combined flux in latest and established models = 4.5933 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 4.5933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094989Jy sigma=0.000678 ! Fit after self-cal, rms=0.094987Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000667714 Jy ! Component: 100 - total flux cleaned = -0.000775457 Jy ! Component: 150 - total flux cleaned = -0.000980614 Jy ! Component: 200 - total flux cleaned = -0.00117501 Jy ! Total flux subtracted in 200 components = -0.00117501 Jy ! Clean residual min=-0.017592 max=0.019399 Jy/beam ! Clean residual mean=0.000027 rms=0.004833 Jy/beam ! Combined flux in latest and established models = 4.59213 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 82 components and 4.59213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094806Jy sigma=0.000676 ! Fit after self-cal, rms=0.094805Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094805Jy sigma=0.000676 ! Fit after self-cal, rms=0.094401Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=11.04 mas, bpa=-13.79 degrees ! Estimated noise=4476.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00554017 Jy ! Component: 100 - total flux cleaned = -0.00803496 Jy ! Component: 150 - total flux cleaned = -0.00893172 Jy ! Component: 200 - total flux cleaned = -0.00937951 Jy ! Total flux subtracted in 200 components = -0.00937951 Jy ! Clean residual min=-0.016894 max=0.018179 Jy/beam ! Clean residual mean=0.000026 rms=0.004576 Jy/beam ! Combined flux in latest and established models = 4.58275 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 86 components and 4.58275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094122Jy sigma=0.000671 ! Fit after self-cal, rms=0.094117Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000293737 Jy ! Component: 100 - total flux cleaned = -0.000375972 Jy ! Component: 150 - total flux cleaned = -0.000452986 Jy ! Component: 200 - total flux cleaned = -0.000600818 Jy ! Total flux subtracted in 200 components = -0.000600818 Jy ! Clean residual min=-0.016709 max=0.018057 Jy/beam ! Clean residual mean=0.000026 rms=0.004536 Jy/beam ! Combined flux in latest and established models = 4.58215 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 87 components and 4.58215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094008Jy sigma=0.000670 ! Fit after self-cal, rms=0.094007Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094007Jy sigma=0.000670 ! Fit after self-cal, rms=0.093729Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.018 mas, bmaj=13.65 mas, bpa=13.2 degrees ! Estimated noise=5683.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00427481 Jy ! Component: 100 - total flux cleaned = -0.00540044 Jy ! Component: 150 - total flux cleaned = -0.00587985 Jy ! Component: 200 - total flux cleaned = -0.0063995 Jy ! Total flux subtracted in 200 components = -0.0063995 Jy ! Clean residual min=-0.023155 max=0.021091 Jy/beam ! Clean residual mean=0.000042 rms=0.006244 Jy/beam ! Combined flux in latest and established models = 4.57575 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 94 components and 4.57575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093676Jy sigma=0.000669 ! Fit after self-cal, rms=0.093660Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000427066 Jy ! Component: 100 - total flux cleaned = -0.000630492 Jy ! Component: 150 - total flux cleaned = -0.000695182 Jy ! Component: 200 - total flux cleaned = -0.000816645 Jy ! Total flux subtracted in 200 components = -0.000816645 Jy ! Clean residual min=-0.023005 max=0.020890 Jy/beam ! Clean residual mean=0.000042 rms=0.006201 Jy/beam ! Combined flux in latest and established models = 4.57493 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 98 components and 4.57493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093689Jy sigma=0.000669 ! Fit after self-cal, rms=0.093684Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=11.05 mas, bpa=-13.8 degrees ! Estimated noise=4475.46 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.617 x 11.05 at -13.8 degrees (North through East) ! Clean map min=-0.016749 max=4.2485 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093684Jy sigma=0.000669 ! Fit after self-cal, rms=0.081366Jy sigma=0.000581 ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=11.05 mas, bpa=-13.79 degrees ! Estimated noise=4475.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0039036 Jy ! Component: 100 - total flux cleaned = -0.00464452 Jy ! Component: 150 - total flux cleaned = -0.00473625 Jy ! Component: 200 - total flux cleaned = -0.00490761 Jy ! Total flux subtracted in 200 components = -0.00490761 Jy ! Clean residual min=-0.016289 max=0.015814 Jy/beam ! Clean residual mean=0.000027 rms=0.004142 Jy/beam ! Combined flux in latest and established models = 4.57002 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 107 components and 4.57002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081116Jy sigma=0.000578 ! Fit after self-cal, rms=0.081115Jy sigma=0.000578 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.61955e-05 Jy ! Component: 100 - total flux cleaned = -0.000219859 Jy ! Component: 150 - total flux cleaned = -0.000285548 Jy ! Component: 200 - total flux cleaned = -0.000412238 Jy ! Total flux subtracted in 200 components = -0.000412238 Jy ! Clean residual min=-0.015978 max=0.015900 Jy/beam ! Clean residual mean=0.000027 rms=0.004109 Jy/beam ! Combined flux in latest and established models = 4.56961 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 109 components and 4.56961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081026Jy sigma=0.000577 ! Fit after self-cal, rms=0.081025Jy sigma=0.000577 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081025Jy sigma=0.000577 ! Fit after self-cal, rms=0.080801Jy sigma=0.000576 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=10.67 mas, bpa=-14.31 degrees ! Estimated noise=4819.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.29704 Jy ! Component: 100 - total flux cleaned = 4.01601 Jy ! Component: 150 - total flux cleaned = 4.21236 Jy ! Component: 200 - total flux cleaned = 4.3212 Jy ! Total flux subtracted in 200 components = 4.3212 Jy ! Clean residual min=-0.047457 max=0.066653 Jy/beam ! Clean residual mean=0.000186 rms=0.016404 Jy/beam ! Combined flux in latest and established models = 4.3212 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 4.3212 Jy ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=11.06 mas, bpa=-13.79 degrees ! Estimated noise=4475.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0896364 Jy ! Component: 100 - total flux cleaned = 0.146497 Jy ! Component: 150 - total flux cleaned = 0.183454 Jy ! Component: 200 - total flux cleaned = 0.207701 Jy ! Total flux subtracted in 200 components = 0.207701 Jy ! Clean residual min=-0.015923 max=0.018704 Jy/beam ! Clean residual mean=0.000056 rms=0.005205 Jy/beam ! Combined flux in latest and established models = 4.5289 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 78 components and 4.5289 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.022 mas, bmaj=13.66 mas, bpa=13.19 degrees ! Estimated noise=5680.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214556 Jy ! Component: 100 - total flux cleaned = 0.0315667 Jy ! Component: 150 - total flux cleaned = 0.0371174 Jy ! Component: 200 - total flux cleaned = 0.0403883 Jy ! Total flux subtracted in 200 components = 0.0403883 Jy ! Clean residual min=-0.021237 max=0.018024 Jy/beam ! Clean residual mean=0.000042 rms=0.005614 Jy/beam ! Combined flux in latest and established models = 4.56929 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121019 Jy ! Component: 100 - total flux cleaned = 0.00121569 Jy ! Component: 150 - total flux cleaned = 0.00115278 Jy ! Component: 200 - total flux cleaned = 0.00109893 Jy ! Total flux subtracted in 200 components = 0.00109893 Jy ! Clean residual min=-0.021016 max=0.017956 Jy/beam ! Clean residual mean=0.000039 rms=0.005572 Jy/beam ! Combined flux in latest and established models = 4.57039 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 113 components and 4.57039 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=11.06 mas, bpa=-13.79 degrees ! Estimated noise=4475.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256445 Jy ! Component: 100 - total flux cleaned = 0.00230911 Jy ! Component: 150 - total flux cleaned = 0.00211954 Jy ! Component: 200 - total flux cleaned = 0.00225859 Jy ! Total flux subtracted in 200 components = 0.00225859 Jy ! Clean residual min=-0.017108 max=0.015117 Jy/beam ! Clean residual mean=0.000021 rms=0.003921 Jy/beam ! Combined flux in latest and established models = 4.57265 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 142 components and 4.57265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080537Jy sigma=0.000575 ! Fit after self-cal, rms=0.080521Jy sigma=0.000574 wmodel J1512-0905_S_2017_02_19_pus_map.mod ! Writing 142 model components to file: J1512-0905_S_2017_02_19_pus_map.mod wobs J1512-0905_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1512-0905_S_2017_02_19_pus_uvs.fits wwins J1512-0905_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J1512-0905_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00144631 Jy ! Component: 100 - total flux cleaned = -0.000722882 Jy ! Component: 150 - total flux cleaned = -0.000702504 Jy ! Component: 200 - total flux cleaned = -1.36824e-05 Jy ! Component: 250 - total flux cleaned = 0.00109951 Jy ! Component: 300 - total flux cleaned = 0.00210938 Jy ! Component: 350 - total flux cleaned = 0.00302924 Jy ! Component: 400 - total flux cleaned = 0.00412226 Jy ! Component: 450 - total flux cleaned = 0.00525061 Jy ! Component: 500 - total flux cleaned = 0.00609374 Jy ! Component: 550 - total flux cleaned = 0.00658853 Jy ! Component: 600 - total flux cleaned = 0.00733799 Jy ! Component: 650 - total flux cleaned = 0.00805047 Jy ! Component: 700 - total flux cleaned = 0.00881614 Jy ! Component: 750 - total flux cleaned = 0.00970661 Jy ! Component: 800 - total flux cleaned = 0.0104048 Jy ! Component: 850 - total flux cleaned = 0.0110741 Jy ! Component: 900 - total flux cleaned = 0.0115752 Jy ! Component: 950 - total flux cleaned = 0.0119883 Jy ! Component: 1000 - total flux cleaned = 0.0123207 Jy ! Component: 1050 - total flux cleaned = 0.0126418 Jy ! Component: 1100 - total flux cleaned = 0.0128915 Jy ! Component: 1150 - total flux cleaned = 0.0131332 Jy ! Component: 1200 - total flux cleaned = 0.013428 Jy ! Component: 1250 - total flux cleaned = 0.0137721 Jy ! Component: 1300 - total flux cleaned = 0.013661 Jy ! Component: 1350 - total flux cleaned = 0.0137718 Jy ! Component: 1400 - total flux cleaned = 0.0138261 Jy ! Component: 1450 - total flux cleaned = 0.0139842 Jy ! Component: 1500 - total flux cleaned = 0.014036 Jy ! Component: 1550 - total flux cleaned = 0.0140356 Jy ! Component: 1600 - total flux cleaned = 0.0139349 Jy ! Component: 1650 - total flux cleaned = 0.0138858 Jy ! Component: 1700 - total flux cleaned = 0.0138858 Jy ! Component: 1750 - total flux cleaned = 0.0138378 Jy ! Component: 1800 - total flux cleaned = 0.0136961 Jy ! Component: 1850 - total flux cleaned = 0.0136027 Jy ! Component: 1900 - total flux cleaned = 0.0134637 Jy ! Component: 1950 - total flux cleaned = 0.0132345 Jy ! Component: 2000 - total flux cleaned = 0.0130978 Jy ! Component: 2050 - total flux cleaned = 0.0130526 Jy ! Component: 2100 - total flux cleaned = 0.0128278 Jy ! Component: 2150 - total flux cleaned = 0.0127387 Jy ! Component: 2200 - total flux cleaned = 0.0126942 Jy ! Component: 2250 - total flux cleaned = 0.0127385 Jy ! Component: 2300 - total flux cleaned = 0.0127388 Jy ! Component: 2350 - total flux cleaned = 0.0127834 Jy ! Component: 2400 - total flux cleaned = 0.0129166 Jy ! Component: 2450 - total flux cleaned = 0.0130942 Jy ! Component: 2500 - total flux cleaned = 0.0132729 Jy ! Component: 2550 - total flux cleaned = 0.0134068 Jy ! Component: 2600 - total flux cleaned = 0.0135418 Jy ! Component: 2650 - total flux cleaned = 0.0136778 Jy ! Component: 2700 - total flux cleaned = 0.0137237 Jy ! Component: 2750 - total flux cleaned = 0.013631 Jy ! Component: 2800 - total flux cleaned = 0.013537 Jy ! Component: 2850 - total flux cleaned = 0.0134414 Jy ! Component: 2900 - total flux cleaned = 0.0132957 Jy ! Component: 2950 - total flux cleaned = 0.013196 Jy ! Component: 3000 - total flux cleaned = 0.0130949 Jy ! Component: 3050 - total flux cleaned = 0.012991 Jy ! Component: 3100 - total flux cleaned = 0.0129384 Jy ! Component: 3150 - total flux cleaned = 0.0128314 Jy ! Component: 3200 - total flux cleaned = 0.0127218 Jy ! Component: 3250 - total flux cleaned = 0.0126106 Jy ! Component: 3300 - total flux cleaned = 0.0124968 Jy ! Component: 3350 - total flux cleaned = 0.0123233 Jy ! Component: 3400 - total flux cleaned = 0.0121444 Jy ! Component: 3450 - total flux cleaned = 0.0120241 Jy ! Component: 3500 - total flux cleaned = 0.0119 Jy ! Component: 3550 - total flux cleaned = 0.0117095 Jy ! Component: 3600 - total flux cleaned = 0.0115139 Jy ! Component: 3650 - total flux cleaned = 0.0113136 Jy ! Component: 3700 - total flux cleaned = 0.0111085 Jy ! Component: 3750 - total flux cleaned = 0.0109689 Jy ! Component: 3800 - total flux cleaned = 0.0106823 Jy ! Component: 3850 - total flux cleaned = 0.0105354 Jy ! Component: 3900 - total flux cleaned = 0.010235 Jy ! Component: 3950 - total flux cleaned = 0.0100042 Jy ! Component: 4000 - total flux cleaned = 0.00976686 Jy ! Component: 4050 - total flux cleaned = 0.00960495 Jy ! Total flux subtracted in 4096 components = 0.00935514 Jy ! Clean residual min=-0.005346 max=0.004812 Jy/beam ! Clean residual mean=0.000001 rms=0.001313 Jy/beam ! Combined flux in latest and established models = 4.582 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 382 components and 4.582 Jy ![Exited script file: muppet] wmap "J1512-0905_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.618 x 11.06 at -13.79 degrees (North through East) ! Clean map min=-0.0068179 max=4.2592 Jy/beam ! Writing clean map to FITS file: J1512-0905_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 4.25918 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00140849 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0992085 0.0992085 0.198417 0.396834 0.793668 1.58734 3.17467 6.34934 12.6987 25.3974 50.7947 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0042 print "peak=",int(1000*peak_flux)/1000 ! peak= 4.259 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.618 x 11.06 at -13.79 degrees (North through East) ! Clean map min=-0.0068179 max=4.2592 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1512-0905_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:53:30 2019