! Started logfile: J1511+0518_S_2017_02_19_pus_uvs.log on Sat May 4 18:53:15 2019 obs J1511+0518_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1511+0518_S_2017_02_19_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.707937 visibilities/baseline/integration-bin. ! Found source: J1511+0518 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 10704 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1511+0518_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 388 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.751021Jy sigma=0.006174 ! Fit after self-cal, rms=0.738110Jy sigma=0.006072 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=6.427 mas, bpa=-3.785 degrees ! Estimated noise=1225.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.198456 Jy ! Component: 100 - total flux cleaned = 0.250698 Jy ! Total flux subtracted in 100 components = 0.250698 Jy ! Clean residual min=-0.009637 max=0.021173 Jy/beam ! Clean residual mean=-0.000021 rms=0.003019 Jy/beam ! Combined flux in latest and established models = 0.250698 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.250698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110293Jy sigma=0.000784 ! Fit after self-cal, rms=0.110248Jy sigma=0.000784 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225396 Jy ! Component: 100 - total flux cleaned = 0.0343748 Jy ! Total flux subtracted in 100 components = 0.0343748 Jy ! Clean residual min=-0.008140 max=0.016474 Jy/beam ! Clean residual mean=-0.000019 rms=0.002334 Jy/beam ! Combined flux in latest and established models = 0.285073 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 21 components and 0.285073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103608Jy sigma=0.000747 ! Fit after self-cal, rms=0.103576Jy sigma=0.000746 ! Inverting map ! Added new window around map position (5, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135073 Jy ! Component: 100 - total flux cleaned = 0.019838 Jy ! Total flux subtracted in 100 components = 0.019838 Jy ! Clean residual min=-0.007958 max=0.007622 Jy/beam ! Clean residual mean=-0.000019 rms=0.002059 Jy/beam ! Combined flux in latest and established models = 0.304911 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.304911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101339Jy sigma=0.000734 ! Fit after self-cal, rms=0.101158Jy sigma=0.000732 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=7.08 mas, bpa=-3.021 degrees ! Estimated noise=931.295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00577499 Jy ! Component: 100 - total flux cleaned = 0.00897867 Jy ! Component: 150 - total flux cleaned = 0.0101673 Jy ! Component: 200 - total flux cleaned = 0.0110498 Jy ! Total flux subtracted in 200 components = 0.0110498 Jy ! Clean residual min=-0.006982 max=0.006508 Jy/beam ! Clean residual mean=-0.000022 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 0.315961 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 43 components and 0.315961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100511Jy sigma=0.000731 ! Fit after self-cal, rms=0.100480Jy sigma=0.000731 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.02 KP 1.09 ! LA 1.06 MK 0.98 NL 0.90 OV 1.07 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 1.05 KP 1.03 ! LA 1.01 MK 0.94 NL 1.05 OV 1.09 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 0.99 KP 0.90 ! LA 0.79 MK 0.94 NL 1.19 OV 0.98 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.89 KP 1.00* ! LA 0.84 MK 1.56 NL 1.00* OV 1.07 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.100480Jy sigma=0.000731 ! Fit after self-cal, rms=0.092801Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.221 mas, bmaj=7.12 mas, bpa=-2.905 degrees ! Estimated noise=935.358 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000308483 Jy ! Component: 100 - total flux cleaned = 0.000415175 Jy ! Component: 150 - total flux cleaned = 0.000290506 Jy ! Component: 200 - total flux cleaned = 0.000143072 Jy ! Total flux subtracted in 200 components = 0.000143072 Jy ! Clean residual min=-0.005583 max=0.005006 Jy/beam ! Clean residual mean=-0.000030 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.316104 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 0.316104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092729Jy sigma=0.000684 ! Fit after self-cal, rms=0.092715Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092715Jy sigma=0.000684 ! Fit after self-cal, rms=0.089850Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=7.129 mas, bpa=-2.74 degrees ! Estimated noise=937.429 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.7266e-05 Jy ! Component: 100 - total flux cleaned = -0.000142408 Jy ! Component: 150 - total flux cleaned = -0.000221773 Jy ! Component: 200 - total flux cleaned = -0.00025857 Jy ! Total flux subtracted in 200 components = -0.00025857 Jy ! Clean residual min=-0.003002 max=0.003074 Jy/beam ! Clean residual mean=-0.000007 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.315845 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 65 components and 0.315845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089815Jy sigma=0.000667 ! Fit after self-cal, rms=0.089838Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.52938e-05 Jy ! Component: 100 - total flux cleaned = -4.37646e-05 Jy ! Component: 150 - total flux cleaned = -7.10229e-05 Jy ! Component: 200 - total flux cleaned = -7.04288e-05 Jy ! Total flux subtracted in 200 components = -7.04288e-05 Jy ! Clean residual min=-0.002972 max=0.003015 Jy/beam ! Clean residual mean=-0.000007 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.315775 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 76 components and 0.315775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089822Jy sigma=0.000667 ! Fit after self-cal, rms=0.089822Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089822Jy sigma=0.000667 ! Fit after self-cal, rms=0.089945Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.233 mas, bmaj=7.133 mas, bpa=-2.675 degrees ! Estimated noise=938.525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00035388 Jy ! Component: 100 - total flux cleaned = -0.000412789 Jy ! Component: 150 - total flux cleaned = -0.000439337 Jy ! Component: 200 - total flux cleaned = -0.000466312 Jy ! Total flux subtracted in 200 components = -0.000466312 Jy ! Clean residual min=-0.002888 max=0.002779 Jy/beam ! Clean residual mean=-0.000005 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.315309 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.315309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089929Jy sigma=0.000666 ! Fit after self-cal, rms=0.089934Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.90041e-05 Jy ! Component: 100 - total flux cleaned = -8.26232e-05 Jy ! Component: 150 - total flux cleaned = -8.33906e-05 Jy ! Component: 200 - total flux cleaned = -0.000105175 Jy ! Total flux subtracted in 200 components = -0.000105175 Jy ! Clean residual min=-0.002866 max=0.002718 Jy/beam ! Clean residual mean=-0.000005 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.315203 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 84 components and 0.315203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089924Jy sigma=0.000666 ! Fit after self-cal, rms=0.089924Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089924Jy sigma=0.000666 ! Fit after self-cal, rms=0.090002Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.059 mas, bmaj=10.46 mas, bpa=4.25 degrees ! Estimated noise=1219.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000798549 Jy ! Component: 100 - total flux cleaned = -0.00101654 Jy ! Component: 150 - total flux cleaned = -0.00112045 Jy ! Component: 200 - total flux cleaned = -0.00121272 Jy ! Total flux subtracted in 200 components = -0.00121272 Jy ! Clean residual min=-0.003202 max=0.003350 Jy/beam ! Clean residual mean=-0.000008 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.313991 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 88 components and 0.313991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090002Jy sigma=0.000666 ! Fit after self-cal, rms=0.090002Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208932 Jy ! Component: 100 - total flux cleaned = -0.000223939 Jy ! Component: 150 - total flux cleaned = -0.000249264 Jy ! Component: 200 - total flux cleaned = -0.000296373 Jy ! Total flux subtracted in 200 components = -0.000296373 Jy ! Clean residual min=-0.003202 max=0.003308 Jy/beam ! Clean residual mean=-0.000008 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.313694 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 96 components and 0.313694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090002Jy sigma=0.000666 ! Fit after self-cal, rms=0.090002Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=7.134 mas, bpa=-2.609 degrees ! Estimated noise=939.456 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.236 x 7.134 at -2.609 degrees (North through East) ! Clean map min=-0.0026774 max=0.26155 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.812 mas, bmaj=6.474 mas, bpa=-3.233 degrees ! Estimated noise=1242.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.201079 Jy ! Component: 100 - total flux cleaned = 0.252837 Jy ! Component: 150 - total flux cleaned = 0.277846 Jy ! Component: 200 - total flux cleaned = 0.292679 Jy ! Total flux subtracted in 200 components = 0.292679 Jy ! Clean residual min=-0.005342 max=0.007589 Jy/beam ! Clean residual mean=-0.000007 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 0.292678 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.292678 Jy ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=7.134 mas, bpa=-2.609 degrees ! Estimated noise=939.456 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00973399 Jy ! Component: 100 - total flux cleaned = 0.0152096 Jy ! Component: 150 - total flux cleaned = 0.0185695 Jy ! Component: 200 - total flux cleaned = 0.0207089 Jy ! Total flux subtracted in 200 components = 0.0207089 Jy ! Clean residual min=-0.003123 max=0.003006 Jy/beam ! Clean residual mean=-0.000004 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.313387 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 51 components and 0.313387 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.059 mas, bmaj=10.46 mas, bpa=4.25 degrees ! Estimated noise=1219.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000534722 Jy ! Component: 100 - total flux cleaned = 0.000581254 Jy ! Component: 150 - total flux cleaned = 0.000524431 Jy ! Component: 200 - total flux cleaned = 0.00048159 Jy ! Total flux subtracted in 200 components = 0.00048159 Jy ! Clean residual min=-0.003175 max=0.003348 Jy/beam ! Clean residual mean=-0.000008 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.313869 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.77518e-05 Jy ! Component: 100 - total flux cleaned = -4.88575e-05 Jy ! Component: 150 - total flux cleaned = -7.67808e-05 Jy ! Component: 200 - total flux cleaned = -8.91663e-05 Jy ! Total flux subtracted in 200 components = -8.91663e-05 Jy ! Clean residual min=-0.003148 max=0.003300 Jy/beam ! Clean residual mean=-0.000008 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.31378 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 71 components and 0.31378 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=7.134 mas, bpa=-2.609 degrees ! Estimated noise=939.456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000380943 Jy ! Component: 100 - total flux cleaned = 0.000380209 Jy ! Component: 150 - total flux cleaned = 0.000379461 Jy ! Component: 200 - total flux cleaned = 0.000412941 Jy ! Total flux subtracted in 200 components = 0.000412941 Jy ! Clean residual min=-0.002889 max=0.002836 Jy/beam ! Clean residual mean=-0.000004 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.314193 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.314193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090029Jy sigma=0.000666 ! Fit after self-cal, rms=0.090025Jy sigma=0.000666 wmodel J1511+0518_S_2017_02_19_pus_map.mod ! Writing 82 model components to file: J1511+0518_S_2017_02_19_pus_map.mod wobs J1511+0518_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1511+0518_S_2017_02_19_pus_uvs.fits wwins J1511+0518_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J1511+0518_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.2511e-05 Jy ! Component: 100 - total flux cleaned = -0.000408355 Jy ! Component: 150 - total flux cleaned = -0.000876781 Jy ! Component: 200 - total flux cleaned = -0.00116426 Jy ! Component: 250 - total flux cleaned = -0.00144249 Jy ! Component: 300 - total flux cleaned = -0.00171192 Jy ! Component: 350 - total flux cleaned = -0.00208444 Jy ! Component: 400 - total flux cleaned = -0.00230214 Jy ! Component: 450 - total flux cleaned = -0.00258492 Jy ! Component: 500 - total flux cleaned = -0.00282638 Jy ! Component: 550 - total flux cleaned = -0.00299505 Jy ! Component: 600 - total flux cleaned = -0.00316056 Jy ! Component: 650 - total flux cleaned = -0.00335406 Jy ! Component: 700 - total flux cleaned = -0.00347998 Jy ! Component: 750 - total flux cleaned = -0.00354234 Jy ! Component: 800 - total flux cleaned = -0.0036934 Jy ! Component: 850 - total flux cleaned = -0.0038114 Jy ! Component: 900 - total flux cleaned = -0.00378191 Jy ! Component: 950 - total flux cleaned = -0.00383814 Jy ! Component: 1000 - total flux cleaned = -0.00381044 Jy ! Component: 1050 - total flux cleaned = -0.00381067 Jy ! Component: 1100 - total flux cleaned = -0.00378386 Jy ! Component: 1150 - total flux cleaned = -0.00373072 Jy ! Component: 1200 - total flux cleaned = -0.00380967 Jy ! Component: 1250 - total flux cleaned = -0.00380957 Jy ! Component: 1300 - total flux cleaned = -0.00388502 Jy ! Component: 1350 - total flux cleaned = -0.00385979 Jy ! Component: 1400 - total flux cleaned = -0.00390913 Jy ! Component: 1450 - total flux cleaned = -0.00398208 Jy ! Component: 1500 - total flux cleaned = -0.00402959 Jy ! Component: 1550 - total flux cleaned = -0.00405351 Jy ! Component: 1600 - total flux cleaned = -0.00424078 Jy ! Component: 1650 - total flux cleaned = -0.00419462 Jy ! Component: 1700 - total flux cleaned = -0.00435484 Jy ! Component: 1750 - total flux cleaned = -0.0043993 Jy ! Component: 1800 - total flux cleaned = -0.00433226 Jy ! Component: 1850 - total flux cleaned = -0.0043325 Jy ! Component: 1900 - total flux cleaned = -0.00437622 Jy ! Component: 1950 - total flux cleaned = -0.00439803 Jy ! Component: 2000 - total flux cleaned = -0.00437672 Jy ! Component: 2050 - total flux cleaned = -0.00431312 Jy ! Component: 2100 - total flux cleaned = -0.00437554 Jy ! Component: 2150 - total flux cleaned = -0.00431329 Jy ! Component: 2200 - total flux cleaned = -0.0042312 Jy ! Component: 2250 - total flux cleaned = -0.00425123 Jy ! Component: 2300 - total flux cleaned = -0.00423072 Jy ! Component: 2350 - total flux cleaned = -0.00419103 Jy ! Component: 2400 - total flux cleaned = -0.00411213 Jy ! Component: 2450 - total flux cleaned = -0.00407307 Jy ! Component: 2500 - total flux cleaned = -0.0040731 Jy ! Component: 2550 - total flux cleaned = -0.00407282 Jy ! Component: 2600 - total flux cleaned = -0.00403501 Jy ! Component: 2650 - total flux cleaned = -0.00407264 Jy ! Component: 2700 - total flux cleaned = -0.00397985 Jy ! Component: 2750 - total flux cleaned = -0.00401666 Jy ! Component: 2800 - total flux cleaned = -0.00403499 Jy ! Component: 2850 - total flux cleaned = -0.00405296 Jy ! Component: 2900 - total flux cleaned = -0.00396362 Jy ! Component: 2950 - total flux cleaned = -0.00403486 Jy ! Component: 3000 - total flux cleaned = -0.00408762 Jy ! Component: 3050 - total flux cleaned = -0.00407022 Jy ! Component: 3100 - total flux cleaned = -0.00417403 Jy ! Component: 3150 - total flux cleaned = -0.00410504 Jy ! Component: 3200 - total flux cleaned = -0.00417355 Jy ! Component: 3250 - total flux cleaned = -0.00424108 Jy ! Component: 3300 - total flux cleaned = -0.00425789 Jy ! Component: 3350 - total flux cleaned = -0.00430799 Jy ! Component: 3400 - total flux cleaned = -0.00434119 Jy ! Component: 3450 - total flux cleaned = -0.00440683 Jy ! Component: 3500 - total flux cleaned = -0.00437396 Jy ! Component: 3550 - total flux cleaned = -0.00442245 Jy ! Component: 3600 - total flux cleaned = -0.00443837 Jy ! Component: 3650 - total flux cleaned = -0.00443832 Jy ! Component: 3700 - total flux cleaned = -0.00453296 Jy ! Component: 3750 - total flux cleaned = -0.00454848 Jy ! Component: 3800 - total flux cleaned = -0.00457943 Jy ! Component: 3850 - total flux cleaned = -0.00461026 Jy ! Component: 3900 - total flux cleaned = -0.00464077 Jy ! Component: 3950 - total flux cleaned = -0.00456471 Jy ! Component: 4000 - total flux cleaned = -0.00464029 Jy ! Component: 4050 - total flux cleaned = -0.00459544 Jy ! Total flux subtracted in 4096 components = -0.00468488 Jy ! Clean residual min=-0.000785 max=0.001012 Jy/beam ! Clean residual mean=-0.000000 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.309508 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 382 components and 0.309508 Jy ![Exited script file: muppet] wmap "J1511+0518_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.236 x 7.134 at -2.609 degrees (North through East) ! Clean map min=-0.0019329 max=0.2622 Jy/beam ! Writing clean map to FITS file: J1511+0518_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.262196 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000276096 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.315905 0.315905 0.631809 1.26362 2.52724 5.05447 10.1089 20.2179 40.4358 80.8716 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.262 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.236 x 7.134 at -2.609 degrees (North through East) ! Clean map min=-0.0019329 max=0.2622 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1511+0518_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:53:20 2019