! Started logfile: J1510-1121_S_2017_10_21_pus_uvs.log on Sat May 11 21:00:34 2019 obs J1510-1121_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1510-1121_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.89272 visibilities/baseline/integration-bin. ! Found source: J1510-1121 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 18640 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1510-1121_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 653 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.998393Jy sigma=0.008263 ! Fit after self-cal, rms=0.950472Jy sigma=0.007895 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=13.77 mas, bpa=-18.39 degrees ! Estimated noise=1203.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0421839 Jy ! Component: 100 - total flux cleaned = 0.0515558 Jy ! Total flux subtracted in 100 components = 0.0515558 Jy ! Clean residual min=-0.005849 max=0.006781 Jy/beam ! Clean residual mean=0.000012 rms=0.001481 Jy/beam ! Combined flux in latest and established models = 0.0515558 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0515558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108353Jy sigma=0.000750 ! Fit after self-cal, rms=0.107355Jy sigma=0.000740 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=16.65 mas, bpa=-17.95 degrees ! Estimated noise=760.886 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00449094 Jy ! Component: 100 - total flux cleaned = 0.00660627 Jy ! Component: 150 - total flux cleaned = 0.0066722 Jy ! Component: 200 - total flux cleaned = 0.00651933 Jy ! Total flux subtracted in 200 components = 0.00651933 Jy ! Clean residual min=-0.004718 max=0.004775 Jy/beam ! Clean residual mean=0.000018 rms=0.001249 Jy/beam ! Combined flux in latest and established models = 0.0580752 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 32 components and 0.0580751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107051Jy sigma=0.000739 ! Fit after self-cal, rms=0.106998Jy sigma=0.000739 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.33 FD 1.25 HN 1.03 KP 1.41 ! LA 1.29 MK 1.28 NL 1.11 OV 0.71 ! PT 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.24 HN 0.98 KP 1.13 ! LA 1.03 MK 1.06 NL 1.07 OV 1.13 ! PT 0.81 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.02 HN 0.98 KP 1.16 ! LA 0.86 MK 1.06 NL 1.20 OV 0.99 ! PT 0.86 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 0.73 KP 1.00* ! LA 0.78 MK 0.89 NL 1.00* OV 1.00* ! PT 0.72 ! ! ! Fit before self-cal, rms=0.106998Jy sigma=0.000739 ! Fit after self-cal, rms=0.100034Jy sigma=0.000726 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.563 mas, bmaj=15.88 mas, bpa=-17.48 degrees ! Estimated noise=767.703 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00097678 Jy ! Component: 100 - total flux cleaned = 0.0010442 Jy ! Component: 150 - total flux cleaned = 0.00115315 Jy ! Component: 200 - total flux cleaned = 0.00124272 Jy ! Total flux subtracted in 200 components = 0.00124272 Jy ! Clean residual min=-0.002839 max=0.003514 Jy/beam ! Clean residual mean=0.000009 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.0593179 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 51 components and 0.0593179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099957Jy sigma=0.000725 ! Fit after self-cal, rms=0.100877Jy sigma=0.000720 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100877Jy sigma=0.000720 ! Fit after self-cal, rms=0.121049Jy sigma=0.000714 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.595 mas, bmaj=15.47 mas, bpa=-17.73 degrees ! Estimated noise=795.444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231766 Jy ! Component: 100 - total flux cleaned = 0.00293064 Jy ! Component: 150 - total flux cleaned = 0.00304203 Jy ! Component: 200 - total flux cleaned = 0.00316558 Jy ! Total flux subtracted in 200 components = 0.00316558 Jy ! Clean residual min=-0.002766 max=0.003132 Jy/beam ! Clean residual mean=0.000015 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.0624834 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 0.0624834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120926Jy sigma=0.000713 ! Fit after self-cal, rms=0.122343Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000929226 Jy ! Component: 100 - total flux cleaned = -0.00106697 Jy ! Component: 150 - total flux cleaned = -0.00117574 Jy ! Component: 200 - total flux cleaned = -0.00128149 Jy ! Total flux subtracted in 200 components = -0.00128149 Jy ! Clean residual min=-0.002607 max=0.002412 Jy/beam ! Clean residual mean=0.000012 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0612019 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.0612019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122340Jy sigma=0.000711 ! Fit after self-cal, rms=0.122330Jy sigma=0.000711 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122330Jy sigma=0.000711 ! Fit after self-cal, rms=0.131431Jy sigma=0.000710 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=15.22 mas, bpa=-17.85 degrees ! Estimated noise=813.145 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156683 Jy ! Component: 100 - total flux cleaned = 0.00186919 Jy ! Component: 150 - total flux cleaned = 0.00195205 Jy ! Component: 200 - total flux cleaned = 0.00201961 Jy ! Total flux subtracted in 200 components = 0.00201961 Jy ! Clean residual min=-0.002374 max=0.002195 Jy/beam ! Clean residual mean=0.000014 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.0632216 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.0632216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131369Jy sigma=0.000710 ! Fit after self-cal, rms=0.131783Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000298595 Jy ! Component: 100 - total flux cleaned = -0.0003918 Jy ! Component: 150 - total flux cleaned = -0.000466835 Jy ! Component: 200 - total flux cleaned = -0.000482669 Jy ! Total flux subtracted in 200 components = -0.000482669 Jy ! Clean residual min=-0.002362 max=0.002171 Jy/beam ! Clean residual mean=0.000013 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.0627389 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 94 components and 0.0627389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131773Jy sigma=0.000709 ! Fit after self-cal, rms=0.131785Jy sigma=0.000709 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131785Jy sigma=0.000709 ! Fit after self-cal, rms=0.135551Jy sigma=0.000709 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.249 mas, bmaj=17.84 mas, bpa=-7.211 degrees ! Estimated noise=997.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118579 Jy ! Component: 100 - total flux cleaned = 0.00138458 Jy ! Component: 150 - total flux cleaned = 0.00148829 Jy ! Component: 200 - total flux cleaned = 0.00155285 Jy ! Total flux subtracted in 200 components = 0.00155285 Jy ! Clean residual min=-0.002171 max=0.002483 Jy/beam ! Clean residual mean=0.000024 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.0642917 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 111 components and 0.0642918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135523Jy sigma=0.000709 ! Fit after self-cal, rms=0.135643Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.43739e-05 Jy ! Component: 100 - total flux cleaned = 0.000146419 Jy ! Component: 150 - total flux cleaned = 0.000179355 Jy ! Component: 200 - total flux cleaned = 0.000197748 Jy ! Total flux subtracted in 200 components = 0.000197748 Jy ! Clean residual min=-0.002303 max=0.002575 Jy/beam ! Clean residual mean=0.000023 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.0644895 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 118 components and 0.0644895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135637Jy sigma=0.000709 ! Fit after self-cal, rms=0.135637Jy sigma=0.000709 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.62 mas, bmaj=15.04 mas, bpa=-17.91 degrees ! Estimated noise=829.547 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.62 x 15.04 at -17.91 degrees (North through East) ! Clean map min=-0.0049954 max=0.055519 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.035 mas, bmaj=12.16 mas, bpa=-17.84 degrees ! Estimated noise=1219.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0432953 Jy ! Component: 100 - total flux cleaned = 0.0544666 Jy ! Component: 150 - total flux cleaned = 0.0580764 Jy ! Component: 200 - total flux cleaned = 0.0597865 Jy ! Total flux subtracted in 200 components = 0.0597865 Jy ! Clean residual min=-0.003692 max=0.003394 Jy/beam ! Clean residual mean=0.000007 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.0597865 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0597865 Jy ! Inverting map and beam ! Estimated beam: bmin=3.62 mas, bmaj=15.04 mas, bpa=-17.91 degrees ! Estimated noise=829.547 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279248 Jy ! Component: 100 - total flux cleaned = 0.00341098 Jy ! Component: 150 - total flux cleaned = 0.003832 Jy ! Component: 200 - total flux cleaned = 0.00421163 Jy ! Total flux subtracted in 200 components = 0.00421163 Jy ! Clean residual min=-0.002652 max=0.002220 Jy/beam ! Clean residual mean=0.000015 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.0639981 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 39 components and 0.0639981 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.249 mas, bmaj=17.84 mas, bpa=-7.211 degrees ! Estimated noise=997.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00073263 Jy ! Component: 100 - total flux cleaned = 0.00070794 Jy ! Component: 150 - total flux cleaned = 0.000707724 Jy ! Component: 200 - total flux cleaned = 0.000706852 Jy ! Total flux subtracted in 200 components = 0.000706852 Jy ! Clean residual min=-0.002322 max=0.002650 Jy/beam ! Clean residual mean=0.000023 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.064705 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.07223e-06 Jy ! Component: 100 - total flux cleaned = -9.2012e-07 Jy ! Component: 150 - total flux cleaned = 1.01941e-05 Jy ! Component: 200 - total flux cleaned = 2.12992e-05 Jy ! Total flux subtracted in 200 components = 2.12992e-05 Jy ! Clean residual min=-0.002325 max=0.002628 Jy/beam ! Clean residual mean=0.000023 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.0647263 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 74 components and 0.0647263 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.62 mas, bmaj=15.04 mas, bpa=-17.91 degrees ! Estimated noise=829.547 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.58252e-05 Jy ! Component: 100 - total flux cleaned = -2.28194e-05 Jy ! Component: 150 - total flux cleaned = -4.46282e-05 Jy ! Component: 200 - total flux cleaned = -6.42193e-05 Jy ! Total flux subtracted in 200 components = -6.42193e-05 Jy ! Clean residual min=-0.002439 max=0.002167 Jy/beam ! Clean residual mean=0.000014 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.064662 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 84 components and 0.064662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135615Jy sigma=0.000709 ! Fit after self-cal, rms=0.135612Jy sigma=0.000709 wmodel J1510-1121_S_2017_10_21_pus_map.mod ! Writing 84 model components to file: J1510-1121_S_2017_10_21_pus_map.mod wobs J1510-1121_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1510-1121_S_2017_10_21_pus_uvs.fits wwins J1510-1121_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1510-1121_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.96435e-05 Jy ! Component: 100 - total flux cleaned = 0.000210116 Jy ! Component: 150 - total flux cleaned = 0.000387568 Jy ! Component: 200 - total flux cleaned = 0.000387686 Jy ! Component: 250 - total flux cleaned = 0.000552774 Jy ! Component: 300 - total flux cleaned = 0.000679627 Jy ! Component: 350 - total flux cleaned = 0.000771638 Jy ! Component: 400 - total flux cleaned = 0.000982514 Jy ! Component: 450 - total flux cleaned = 0.00130519 Jy ! Component: 500 - total flux cleaned = 0.00156225 Jy ! Component: 550 - total flux cleaned = 0.00186936 Jy ! Component: 600 - total flux cleaned = 0.00208794 Jy ! Component: 650 - total flux cleaned = 0.00230206 Jy ! Component: 700 - total flux cleaned = 0.00245957 Jy ! Component: 750 - total flux cleaned = 0.00264019 Jy ! Component: 800 - total flux cleaned = 0.00286776 Jy ! Component: 850 - total flux cleaned = 0.00304156 Jy ! Component: 900 - total flux cleaned = 0.00314 Jy ! Component: 950 - total flux cleaned = 0.00330836 Jy ! Component: 1000 - total flux cleaned = 0.00328499 Jy ! Component: 1050 - total flux cleaned = 0.00335531 Jy ! Component: 1100 - total flux cleaned = 0.00337872 Jy ! Component: 1150 - total flux cleaned = 0.00344674 Jy ! Component: 1200 - total flux cleaned = 0.00342406 Jy ! Component: 1250 - total flux cleaned = 0.00342403 Jy ! Component: 1300 - total flux cleaned = 0.00346799 Jy ! Component: 1350 - total flux cleaned = 0.0034894 Jy ! Component: 1400 - total flux cleaned = 0.00353194 Jy ! Component: 1450 - total flux cleaned = 0.00351126 Jy ! Component: 1500 - total flux cleaned = 0.00355308 Jy ! Component: 1550 - total flux cleaned = 0.0034916 Jy ! Component: 1600 - total flux cleaned = 0.00347157 Jy ! Component: 1650 - total flux cleaned = 0.00345193 Jy ! Component: 1700 - total flux cleaned = 0.00347175 Jy ! Component: 1750 - total flux cleaned = 0.00343228 Jy ! Component: 1800 - total flux cleaned = 0.00345162 Jy ! Component: 1850 - total flux cleaned = 0.00349001 Jy ! Component: 1900 - total flux cleaned = 0.00345203 Jy ! Component: 1950 - total flux cleaned = 0.00352762 Jy ! Component: 2000 - total flux cleaned = 0.00356474 Jy ! Component: 2050 - total flux cleaned = 0.00356471 Jy ! Component: 2100 - total flux cleaned = 0.00369324 Jy ! Component: 2150 - total flux cleaned = 0.00374747 Jy ! Component: 2200 - total flux cleaned = 0.00374734 Jy ! Component: 2250 - total flux cleaned = 0.00378322 Jy ! Component: 2300 - total flux cleaned = 0.00387217 Jy ! Component: 2350 - total flux cleaned = 0.00394259 Jy ! Component: 2400 - total flux cleaned = 0.00404714 Jy ! Component: 2450 - total flux cleaned = 0.00404685 Jy ! Component: 2500 - total flux cleaned = 0.0041671 Jy ! Component: 2550 - total flux cleaned = 0.00421819 Jy ! Component: 2600 - total flux cleaned = 0.0042859 Jy ! Component: 2650 - total flux cleaned = 0.00438677 Jy ! Component: 2700 - total flux cleaned = 0.00443663 Jy ! Component: 2750 - total flux cleaned = 0.00456902 Jy ! Component: 2800 - total flux cleaned = 0.00458535 Jy ! Component: 2850 - total flux cleaned = 0.00471588 Jy ! Component: 2900 - total flux cleaned = 0.0047966 Jy ! Component: 2950 - total flux cleaned = 0.00486102 Jy ! Component: 3000 - total flux cleaned = 0.00495672 Jy ! Component: 3050 - total flux cleaned = 0.00503589 Jy ! Component: 3100 - total flux cleaned = 0.00509878 Jy ! Component: 3150 - total flux cleaned = 0.00525523 Jy ! Component: 3200 - total flux cleaned = 0.00531743 Jy ! Component: 3250 - total flux cleaned = 0.00548714 Jy ! Component: 3300 - total flux cleaned = 0.00556373 Jy ! Component: 3350 - total flux cleaned = 0.00568555 Jy ! Component: 3400 - total flux cleaned = 0.00576125 Jy ! Component: 3450 - total flux cleaned = 0.00583643 Jy ! Component: 3500 - total flux cleaned = 0.00591109 Jy ! Component: 3550 - total flux cleaned = 0.00601501 Jy ! Component: 3600 - total flux cleaned = 0.00614774 Jy ! Component: 3650 - total flux cleaned = 0.00622107 Jy ! Component: 3700 - total flux cleaned = 0.00629387 Jy ! Component: 3750 - total flux cleaned = 0.00638077 Jy ! Component: 3800 - total flux cleaned = 0.00646714 Jy ! Component: 3850 - total flux cleaned = 0.00652447 Jy ! Component: 3900 - total flux cleaned = 0.00660989 Jy ! Component: 3950 - total flux cleaned = 0.00665244 Jy ! Component: 4000 - total flux cleaned = 0.00676498 Jy ! Component: 4050 - total flux cleaned = 0.00682096 Jy ! Total flux subtracted in 4096 components = 0.00690463 Jy ! Clean residual min=-0.001079 max=0.001015 Jy/beam ! Clean residual mean=0.000007 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.0715667 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 381 components and 0.0715667 Jy ![Exited script file: muppet] wmap "J1510-1121_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.62 x 15.04 at -17.91 degrees (North through East) ! Clean map min=-0.0046891 max=0.055548 Jy/beam ! Writing clean map to FITS file: J1510-1121_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0555481 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000278932 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.50643 1.50643 3.01287 6.02573 12.0515 24.1029 48.2059 96.4117 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.62 x 15.04 at -17.91 degrees (North through East) ! Clean map min=-0.0046891 max=0.055548 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1510-1121_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:00:39 2019