! Started logfile: J1510-1121_S_2017_06_10_pus_uvs.log on Mon May 6 14:56:51 2019 obs J1510-1121_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1510-1121_S_2017_06_10_pus_uva.fits ! AN table 1: 108 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.836008 visibilities/baseline/integration-bin. ! Found source: J1510-1121 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 16252 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1510-1121_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 484 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 741 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003479Jy sigma=0.008758 ! Fit after self-cal, rms=0.960898Jy sigma=0.008393 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.781 mas, bmaj=6.935 mas, bpa=-2.098 degrees ! Estimated noise=1225.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0340788 Jy ! Component: 100 - total flux cleaned = 0.0415183 Jy ! Total flux subtracted in 100 components = 0.0415183 Jy ! Clean residual min=-0.004250 max=0.003994 Jy/beam ! Clean residual mean=-0.000004 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.0415183 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0415183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080077Jy sigma=0.000667 ! Fit after self-cal, rms=0.078487Jy sigma=0.000652 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.181 mas, bmaj=8.044 mas, bpa=-2.997 degrees ! Estimated noise=814.957 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207579 Jy ! Component: 100 - total flux cleaned = 0.00184268 Jy ! Component: 150 - total flux cleaned = 0.00159122 Jy ! Component: 200 - total flux cleaned = 0.00135607 Jy ! Total flux subtracted in 200 components = 0.00135607 Jy ! Clean residual min=-0.002130 max=0.002769 Jy/beam ! Clean residual mean=0.000006 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.0428744 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 11 components and 0.0428744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078353Jy sigma=0.000651 ! Fit after self-cal, rms=0.078308Jy sigma=0.000651 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 0.84 KP 1.12 ! LA 1.09 MK 0.99 NL 1.00 OV 1.07 ! PT 1.10 SC 0.94 ! ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00 KP 1.00 ! LA 1.00 MK 0.98 NL 1.05 OV 1.10 ! PT 1.09 SC 1.00 ! ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.92 KP 0.99 ! LA 0.98 MK 0.99 NL 0.98 OV 0.99 ! PT 1.01 SC 0.95 ! ! ! Correcting IF 4. ! A total of 123 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.78 HN 0.78 KP 1.00* ! LA 1.00* MK 0.83 NL 1.00* OV 1.00* ! PT 0.88 SC 1.00* ! ! ! Fit before self-cal, rms=0.078308Jy sigma=0.000651 ! Fit after self-cal, rms=0.077622Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=7.961 mas, bpa=-3.075 degrees ! Estimated noise=821.278 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134019 Jy ! Component: 100 - total flux cleaned = 6.57538e-05 Jy ! Component: 150 - total flux cleaned = 6.50267e-05 Jy ! Component: 200 - total flux cleaned = 8.14789e-05 Jy ! Total flux subtracted in 200 components = 8.14789e-05 Jy ! Clean residual min=-0.002119 max=0.002357 Jy/beam ! Clean residual mean=0.000006 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0429558 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 0.0429558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077610Jy sigma=0.000651 ! Fit after self-cal, rms=0.077564Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077564Jy sigma=0.000651 ! Fit after self-cal, rms=0.076652Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=7.9 mas, bpa=-3.392 degrees ! Estimated noise=817.368 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.41769e-05 Jy ! Component: 100 - total flux cleaned = -0.000127837 Jy ! Component: 150 - total flux cleaned = -0.00018316 Jy ! Component: 200 - total flux cleaned = -0.000219571 Jy ! Total flux subtracted in 200 components = -0.000219571 Jy ! Clean residual min=-0.002026 max=0.002120 Jy/beam ! Clean residual mean=0.000004 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.0427363 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.0427363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076646Jy sigma=0.000650 ! Fit after self-cal, rms=0.076624Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20.5, 96). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204416 Jy ! Component: 100 - total flux cleaned = 0.00263848 Jy ! Component: 150 - total flux cleaned = 0.00263963 Jy ! Component: 200 - total flux cleaned = 0.00258484 Jy ! Total flux subtracted in 200 components = 0.00258484 Jy ! Clean residual min=-0.001828 max=0.001883 Jy/beam ! Clean residual mean=0.000002 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0453211 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 43 components and 0.0453211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076563Jy sigma=0.000649 ! Fit after self-cal, rms=0.076533Jy sigma=0.000649 ! Inverting map ! Added new window around map position (98.5, -43). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196946 Jy ! Component: 100 - total flux cleaned = 0.00269096 Jy ! Component: 150 - total flux cleaned = 0.00297302 Jy ! Component: 200 - total flux cleaned = 0.00304223 Jy ! Total flux subtracted in 200 components = 0.00304223 Jy ! Clean residual min=-0.001816 max=0.001695 Jy/beam ! Clean residual mean=0.000002 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0483633 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 58 components and 0.0483633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076467Jy sigma=0.000648 ! Fit after self-cal, rms=0.076436Jy sigma=0.000648 ! Inverting map ! Added new window around map position (-65.5, 39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159487 Jy ! Component: 100 - total flux cleaned = 0.00222189 Jy ! Component: 150 - total flux cleaned = 0.0024204 Jy ! Component: 200 - total flux cleaned = 0.00238768 Jy ! Total flux subtracted in 200 components = 0.00238768 Jy ! Clean residual min=-0.001711 max=0.001719 Jy/beam ! Clean residual mean=0.000001 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.050751 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 75 components and 0.050751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076374Jy sigma=0.000648 ! Fit after self-cal, rms=0.076347Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076347Jy sigma=0.000647 ! Fit after self-cal, rms=0.075244Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=7.865 mas, bpa=-3.41 degrees ! Estimated noise=803.511 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150207 Jy ! Component: 100 - total flux cleaned = 0.00192189 Jy ! Component: 150 - total flux cleaned = 0.0020611 Jy ! Component: 200 - total flux cleaned = 0.00206017 Jy ! Total flux subtracted in 200 components = 0.00206017 Jy ! Clean residual min=-0.001607 max=0.001623 Jy/beam ! Clean residual mean=0.000002 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0528112 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 83 components and 0.0528112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075202Jy sigma=0.000647 ! Fit after self-cal, rms=0.075200Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010416 Jy ! Component: 100 - total flux cleaned = 0.00121751 Jy ! Component: 150 - total flux cleaned = 0.00121852 Jy ! Component: 200 - total flux cleaned = 0.00116471 Jy ! Total flux subtracted in 200 components = 0.00116471 Jy ! Clean residual min=-0.001614 max=0.001659 Jy/beam ! Clean residual mean=0.000002 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0539759 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 88 components and 0.0539759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075172Jy sigma=0.000646 ! Fit after self-cal, rms=0.075163Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075163Jy sigma=0.000646 ! Fit after self-cal, rms=0.075166Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.396 mas, bmaj=14.71 mas, bpa=0.05669 degrees ! Estimated noise=1063.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000294742 Jy ! Component: 100 - total flux cleaned = 0.000449679 Jy ! Component: 150 - total flux cleaned = 0.000373025 Jy ! Component: 200 - total flux cleaned = 0.000321493 Jy ! Total flux subtracted in 200 components = 0.000321493 Jy ! Clean residual min=-0.001706 max=0.001876 Jy/beam ! Clean residual mean=0.000004 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0542974 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 109 components and 0.0542974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075157Jy sigma=0.000646 ! Fit after self-cal, rms=0.075168Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000248718 Jy ! Component: 100 - total flux cleaned = 0.000287749 Jy ! Component: 150 - total flux cleaned = 0.000253642 Jy ! Component: 200 - total flux cleaned = 0.000237684 Jy ! Total flux subtracted in 200 components = 0.000237684 Jy ! Clean residual min=-0.001740 max=0.001865 Jy/beam ! Clean residual mean=0.000004 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.0545351 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 113 components and 0.0545351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075163Jy sigma=0.000646 ! Fit after self-cal, rms=0.075162Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=7.852 mas, bpa=-3.411 degrees ! Estimated noise=802.077 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.092 x 7.852 at -3.411 degrees (North through East) ! Clean map min=-0.001554 max=0.044792 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=6.782 mas, bpa=-2.409 degrees ! Estimated noise=1164 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0339688 Jy ! Component: 100 - total flux cleaned = 0.0423486 Jy ! Component: 150 - total flux cleaned = 0.0475124 Jy ! Component: 200 - total flux cleaned = 0.0510825 Jy ! Total flux subtracted in 200 components = 0.0510825 Jy ! Clean residual min=-0.003628 max=0.003236 Jy/beam ! Clean residual mean=-0.000000 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.0510825 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0510825 Jy ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=7.852 mas, bpa=-3.411 degrees ! Estimated noise=802.077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185653 Jy ! Component: 100 - total flux cleaned = 0.00266197 Jy ! Component: 150 - total flux cleaned = 0.00297165 Jy ! Component: 200 - total flux cleaned = 0.00317427 Jy ! Total flux subtracted in 200 components = 0.00317427 Jy ! Clean residual min=-0.002150 max=0.002015 Jy/beam ! Clean residual mean=0.000002 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0542568 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 39 components and 0.0542568 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.396 mas, bmaj=14.71 mas, bpa=0.05669 degrees ! Estimated noise=1063.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000909759 Jy ! Component: 100 - total flux cleaned = 0.00112811 Jy ! Component: 150 - total flux cleaned = 0.00106053 Jy ! Component: 200 - total flux cleaned = 0.000967555 Jy ! Total flux subtracted in 200 components = 0.000967555 Jy ! Clean residual min=-0.001816 max=0.002029 Jy/beam ! Clean residual mean=0.000004 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.0552244 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.91149e-05 Jy ! Component: 100 - total flux cleaned = -0.000108864 Jy ! Component: 150 - total flux cleaned = -0.000182783 Jy ! Component: 200 - total flux cleaned = -0.000273141 Jy ! Total flux subtracted in 200 components = -0.000273141 Jy ! Clean residual min=-0.001753 max=0.001995 Jy/beam ! Clean residual mean=0.000004 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.0549512 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 75 components and 0.0549512 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=7.852 mas, bpa=-3.411 degrees ! Estimated noise=802.077 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.08746e-05 Jy ! Component: 100 - total flux cleaned = -9.73196e-05 Jy ! Component: 150 - total flux cleaned = -0.00014083 Jy ! Component: 200 - total flux cleaned = -0.000179886 Jy ! Total flux subtracted in 200 components = -0.000179886 Jy ! Clean residual min=-0.001781 max=0.001739 Jy/beam ! Clean residual mean=0.000002 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.0547713 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 96 components and 0.0547713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075202Jy sigma=0.000647 ! Fit after self-cal, rms=0.075175Jy sigma=0.000646 wmodel J1510-1121_S_2017_06_10_pus_map.mod ! Writing 96 model components to file: J1510-1121_S_2017_06_10_pus_map.mod wobs J1510-1121_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1510-1121_S_2017_06_10_pus_uvs.fits wwins J1510-1121_S_2017_06_10_pus_map.win ! wwins: Wrote 4 windows to J1510-1121_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020357 Jy ! Component: 100 - total flux cleaned = 0.000260602 Jy ! Component: 150 - total flux cleaned = 0.000339331 Jy ! Component: 200 - total flux cleaned = 0.000389361 Jy ! Component: 250 - total flux cleaned = 0.000390155 Jy ! Component: 300 - total flux cleaned = 0.000390523 Jy ! Component: 350 - total flux cleaned = 0.0004358 Jy ! Component: 400 - total flux cleaned = 0.000608434 Jy ! Component: 450 - total flux cleaned = 0.000671224 Jy ! Component: 500 - total flux cleaned = 0.00073279 Jy ! Component: 550 - total flux cleaned = 0.00081255 Jy ! Component: 600 - total flux cleaned = 0.000773724 Jy ! Component: 650 - total flux cleaned = 0.000736279 Jy ! Component: 700 - total flux cleaned = 0.000736296 Jy ! Component: 750 - total flux cleaned = 0.000700047 Jy ! Component: 800 - total flux cleaned = 0.000664549 Jy ! Component: 850 - total flux cleaned = 0.000751917 Jy ! Component: 900 - total flux cleaned = 0.000785475 Jy ! Component: 950 - total flux cleaned = 0.000768372 Jy ! Component: 1000 - total flux cleaned = 0.000800758 Jy ! Component: 1050 - total flux cleaned = 0.000784321 Jy ! Component: 1100 - total flux cleaned = 0.000831875 Jy ! Component: 1150 - total flux cleaned = 0.000909619 Jy ! Component: 1200 - total flux cleaned = 0.000940076 Jy ! Component: 1250 - total flux cleaned = 0.000955518 Jy ! Component: 1300 - total flux cleaned = 0.000985068 Jy ! Component: 1350 - total flux cleaned = 0.00101399 Jy ! Component: 1400 - total flux cleaned = 0.00101394 Jy ! Component: 1450 - total flux cleaned = 0.000999864 Jy ! Component: 1500 - total flux cleaned = 0.00102792 Jy ! Component: 1550 - total flux cleaned = 0.00101413 Jy ! Component: 1600 - total flux cleaned = 0.00104141 Jy ! Component: 1650 - total flux cleaned = 0.00104166 Jy ! Component: 1700 - total flux cleaned = 0.00104189 Jy ! Component: 1750 - total flux cleaned = 0.00110774 Jy ! Component: 1800 - total flux cleaned = 0.00108184 Jy ! Component: 1850 - total flux cleaned = 0.00114596 Jy ! Component: 1900 - total flux cleaned = 0.00112066 Jy ! Component: 1950 - total flux cleaned = 0.00113341 Jy ! Component: 2000 - total flux cleaned = 0.00118277 Jy ! Component: 2050 - total flux cleaned = 0.00124415 Jy ! Component: 2100 - total flux cleaned = 0.00125628 Jy ! Component: 2150 - total flux cleaned = 0.00132809 Jy ! Component: 2200 - total flux cleaned = 0.00135164 Jy ! Component: 2250 - total flux cleaned = 0.00141023 Jy ! Component: 2300 - total flux cleaned = 0.00145667 Jy ! Component: 2350 - total flux cleaned = 0.00147974 Jy ! Component: 2400 - total flux cleaned = 0.00153667 Jy ! Component: 2450 - total flux cleaned = 0.00158168 Jy ! Component: 2500 - total flux cleaned = 0.00158175 Jy ! Component: 2550 - total flux cleaned = 0.0016372 Jy ! Component: 2600 - total flux cleaned = 0.00171379 Jy ! Component: 2650 - total flux cleaned = 0.00174632 Jy ! Component: 2700 - total flux cleaned = 0.00176794 Jy ! Component: 2750 - total flux cleaned = 0.00179998 Jy ! Component: 2800 - total flux cleaned = 0.0018636 Jy ! Component: 2850 - total flux cleaned = 0.00188452 Jy ! Component: 2900 - total flux cleaned = 0.00190536 Jy ! Component: 2950 - total flux cleaned = 0.00195708 Jy ! Component: 3000 - total flux cleaned = 0.0019981 Jy ! Component: 3050 - total flux cleaned = 0.00201848 Jy ! Component: 3100 - total flux cleaned = 0.00203861 Jy ! Component: 3150 - total flux cleaned = 0.00212885 Jy ! Component: 3200 - total flux cleaned = 0.00214871 Jy ! Component: 3250 - total flux cleaned = 0.00218823 Jy ! Component: 3300 - total flux cleaned = 0.00222755 Jy ! Component: 3350 - total flux cleaned = 0.00226651 Jy ! Component: 3400 - total flux cleaned = 0.00231491 Jy ! Component: 3450 - total flux cleaned = 0.00234388 Jy ! Component: 3500 - total flux cleaned = 0.00241075 Jy ! Component: 3550 - total flux cleaned = 0.00245827 Jy ! Component: 3600 - total flux cleaned = 0.00249607 Jy ! Component: 3650 - total flux cleaned = 0.00254293 Jy ! Component: 3700 - total flux cleaned = 0.00258953 Jy ! Component: 3750 - total flux cleaned = 0.00263585 Jy ! Component: 3800 - total flux cleaned = 0.00266354 Jy ! Component: 3850 - total flux cleaned = 0.00273692 Jy ! Component: 3900 - total flux cleaned = 0.00274604 Jy ! Component: 3950 - total flux cleaned = 0.00281853 Jy ! Component: 4000 - total flux cleaned = 0.00285454 Jy ! Component: 4050 - total flux cleaned = 0.00289932 Jy ! Total flux subtracted in 4096 components = 0.00295272 Jy ! Clean residual min=-0.000571 max=0.000553 Jy/beam ! Clean residual mean=0.000001 rms=0.000158 Jy/beam ! Combined flux in latest and established models = 0.0577241 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 373 components and 0.0577241 Jy ![Exited script file: muppet] wmap "J1510-1121_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.092 x 7.852 at -3.411 degrees (North through East) ! Clean map min=-0.0012588 max=0.04394 Jy/beam ! Writing clean map to FITS file: J1510-1121_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0439398 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000153653 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04907 1.04907 2.09814 4.19628 8.39256 16.7851 33.5703 67.1405 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.043 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.092 x 7.852 at -3.411 degrees (North through East) ! Clean map min=-0.0012588 max=0.04394 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1510-1121_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:56:56 2019