! Started logfile: J1510+5702_S_2017_07_16_pus_uvs.log on Thu May 9 11:12:14 2019 obs J1510+5702_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1510+5702_S_2017_07_16_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.706667 visibilities/baseline/integration-bin. ! Found source: J1510+5702 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 1272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1510+5702_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.828044Jy sigma=0.008494 ! Fit after self-cal, rms=0.824389Jy sigma=0.008456 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.362 mas, bmaj=9.374 mas, bpa=5.027 degrees ! Estimated noise=2605.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137791 Jy ! Component: 100 - total flux cleaned = 0.168429 Jy ! Total flux subtracted in 100 components = 0.168429 Jy ! Clean residual min=-0.010110 max=0.011213 Jy/beam ! Clean residual mean=0.000005 rms=0.002722 Jy/beam ! Combined flux in latest and established models = 0.168429 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.168429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073683Jy sigma=0.000711 ! Fit after self-cal, rms=0.073683Jy sigma=0.000711 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.849 mas, bmaj=9.885 mas, bpa=5.574 degrees ! Estimated noise=2204.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101875 Jy ! Component: 100 - total flux cleaned = 0.0148926 Jy ! Component: 150 - total flux cleaned = 0.0167791 Jy ! Component: 200 - total flux cleaned = 0.017632 Jy ! Total flux subtracted in 200 components = 0.017632 Jy ! Clean residual min=-0.007483 max=0.006164 Jy/beam ! Clean residual mean=-0.000007 rms=0.001714 Jy/beam ! Combined flux in latest and established models = 0.186061 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 0.186061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072142Jy sigma=0.000699 ! Fit after self-cal, rms=0.072150Jy sigma=0.000699 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.95 KP 1.08 ! LA 1.07 MK 1.03 NL 0.88 OV 1.01 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.03 KP 1.00 ! LA 0.95 MK 1.04 NL 1.02 OV 1.00 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.69 FD 1.00* HN 1.05 KP 1.02 ! LA 1.05 MK 1.05 NL 0.97 OV 0.95 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.19 KP 1.00* ! LA 1.02 MK 0.95 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.072150Jy sigma=0.000699 ! Fit after self-cal, rms=0.068648Jy sigma=0.000674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=9.783 mas, bpa=5.697 degrees ! Estimated noise=2205.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165341 Jy ! Component: 100 - total flux cleaned = 0.0018258 Jy ! Component: 150 - total flux cleaned = 0.0021018 Jy ! Component: 200 - total flux cleaned = 0.00232188 Jy ! Total flux subtracted in 200 components = 0.00232188 Jy ! Clean residual min=-0.004612 max=0.004789 Jy/beam ! Clean residual mean=0.000001 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.188383 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.188383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068453Jy sigma=0.000672 ! Fit after self-cal, rms=0.068465Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068465Jy sigma=0.000672 ! Fit after self-cal, rms=0.068382Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=9.75 mas, bpa=5.713 degrees ! Estimated noise=2200.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183622 Jy ! Component: 100 - total flux cleaned = 0.000350158 Jy ! Component: 150 - total flux cleaned = 0.000566639 Jy ! Component: 200 - total flux cleaned = 0.000709183 Jy ! Total flux subtracted in 200 components = 0.000709183 Jy ! Clean residual min=-0.004528 max=0.004486 Jy/beam ! Clean residual mean=0.000000 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.189092 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 36 components and 0.189092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068302Jy sigma=0.000671 ! Fit after self-cal, rms=0.068301Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147669 Jy ! Component: 100 - total flux cleaned = 0.000227045 Jy ! Component: 150 - total flux cleaned = 0.000321489 Jy ! Component: 200 - total flux cleaned = 0.00042425 Jy ! Total flux subtracted in 200 components = 0.00042425 Jy ! Clean residual min=-0.004467 max=0.004489 Jy/beam ! Clean residual mean=-0.000000 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.189516 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.189516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068281Jy sigma=0.000670 ! Fit after self-cal, rms=0.068280Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068280Jy sigma=0.000670 ! Fit after self-cal, rms=0.068290Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=9.727 mas, bpa=5.722 degrees ! Estimated noise=2197.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000513716 Jy ! Component: 100 - total flux cleaned = -0.000456842 Jy ! Component: 150 - total flux cleaned = -0.00036194 Jy ! Component: 200 - total flux cleaned = -0.000281369 Jy ! Total flux subtracted in 200 components = -0.000281369 Jy ! Clean residual min=-0.004477 max=0.004406 Jy/beam ! Clean residual mean=-0.000000 rms=0.001132 Jy/beam ! Combined flux in latest and established models = 0.189235 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.189235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068262Jy sigma=0.000670 ! Fit after self-cal, rms=0.068262Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.82748e-05 Jy ! Component: 100 - total flux cleaned = 0.000135395 Jy ! Component: 150 - total flux cleaned = 0.000190583 Jy ! Component: 200 - total flux cleaned = 0.000240962 Jy ! Total flux subtracted in 200 components = 0.000240962 Jy ! Clean residual min=-0.004469 max=0.004402 Jy/beam ! Clean residual mean=-0.000001 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.189476 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 54 components and 0.189476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068255Jy sigma=0.000670 ! Fit after self-cal, rms=0.068254Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068254Jy sigma=0.000670 ! Fit after self-cal, rms=0.068305Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.612 mas, bmaj=10.54 mas, bpa=1.569 degrees ! Estimated noise=2835.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000615537 Jy ! Component: 100 - total flux cleaned = 0.000641686 Jy ! Component: 150 - total flux cleaned = 0.000609065 Jy ! Component: 200 - total flux cleaned = 0.000595818 Jy ! Total flux subtracted in 200 components = 0.000595818 Jy ! Clean residual min=-0.003128 max=0.003344 Jy/beam ! Clean residual mean=-0.000004 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.190072 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 67 components and 0.190072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068312Jy sigma=0.000670 ! Fit after self-cal, rms=0.068309Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.30349e-06 Jy ! Component: 100 - total flux cleaned = -2.03085e-05 Jy ! Component: 150 - total flux cleaned = -4.21576e-05 Jy ! Component: 200 - total flux cleaned = -4.18595e-05 Jy ! Total flux subtracted in 200 components = -4.18595e-05 Jy ! Clean residual min=-0.003154 max=0.003386 Jy/beam ! Clean residual mean=-0.000004 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.19003 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 70 components and 0.19003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068316Jy sigma=0.000670 ! Fit after self-cal, rms=0.068314Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=9.716 mas, bpa=5.718 degrees ! Estimated noise=2195.22 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.916 x 9.716 at 5.718 degrees (North through East) ! Clean map min=-0.0041975 max=0.17646 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.416 mas, bmaj=9.294 mas, bpa=5.227 degrees ! Estimated noise=2618.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137698 Jy ! Component: 100 - total flux cleaned = 0.167821 Jy ! Component: 150 - total flux cleaned = 0.177129 Jy ! Component: 200 - total flux cleaned = 0.181693 Jy ! Total flux subtracted in 200 components = 0.181693 Jy ! Clean residual min=-0.006503 max=0.005722 Jy/beam ! Clean residual mean=0.000003 rms=0.001606 Jy/beam ! Combined flux in latest and established models = 0.181693 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.181693 Jy ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=9.716 mas, bpa=5.718 degrees ! Estimated noise=2195.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00335888 Jy ! Component: 100 - total flux cleaned = 0.00459482 Jy ! Component: 150 - total flux cleaned = 0.00528824 Jy ! Component: 200 - total flux cleaned = 0.00579823 Jy ! Total flux subtracted in 200 components = 0.00579823 Jy ! Clean residual min=-0.004537 max=0.004409 Jy/beam ! Clean residual mean=0.000001 rms=0.001147 Jy/beam ! Combined flux in latest and established models = 0.187491 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 0.187491 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.612 mas, bmaj=10.54 mas, bpa=1.569 degrees ! Estimated noise=2835.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170731 Jy ! Component: 100 - total flux cleaned = 0.0022752 Jy ! Component: 150 - total flux cleaned = 0.00234589 Jy ! Component: 200 - total flux cleaned = 0.00239306 Jy ! Total flux subtracted in 200 components = 0.00239306 Jy ! Clean residual min=-0.003184 max=0.003421 Jy/beam ! Clean residual mean=-0.000003 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.189884 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.11346e-05 Jy ! Component: 100 - total flux cleaned = 3.05764e-05 Jy ! Component: 150 - total flux cleaned = 4.79034e-05 Jy ! Component: 200 - total flux cleaned = 4.78721e-05 Jy ! Total flux subtracted in 200 components = 4.78721e-05 Jy ! Clean residual min=-0.003156 max=0.003424 Jy/beam ! Clean residual mean=-0.000004 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.189932 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 43 components and 0.189932 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=9.716 mas, bpa=5.718 degrees ! Estimated noise=2195.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00046697 Jy ! Component: 100 - total flux cleaned = -0.000665446 Jy ! Component: 150 - total flux cleaned = -0.0008304 Jy ! Component: 200 - total flux cleaned = -0.000914998 Jy ! Total flux subtracted in 200 components = -0.000914998 Jy ! Clean residual min=-0.004443 max=0.004290 Jy/beam ! Clean residual mean=-0.000001 rms=0.001130 Jy/beam ! Combined flux in latest and established models = 0.189017 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.189017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068354Jy sigma=0.000670 ! Fit after self-cal, rms=0.068344Jy sigma=0.000670 wmodel J1510+5702_S_2017_07_16_pus_map.mod ! Writing 50 model components to file: J1510+5702_S_2017_07_16_pus_map.mod wobs J1510+5702_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1510+5702_S_2017_07_16_pus_uvs.fits wwins J1510+5702_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J1510+5702_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.43131e-06 Jy ! Component: 100 - total flux cleaned = -7.83276e-06 Jy ! Component: 150 - total flux cleaned = -0.000347722 Jy ! Component: 200 - total flux cleaned = -0.000539548 Jy ! Component: 250 - total flux cleaned = -0.000663532 Jy ! Component: 300 - total flux cleaned = -0.000781137 Jy ! Component: 350 - total flux cleaned = -0.000779609 Jy ! Component: 400 - total flux cleaned = -0.000994967 Jy ! Component: 450 - total flux cleaned = -0.00115109 Jy ! Component: 500 - total flux cleaned = -0.00140551 Jy ! Component: 550 - total flux cleaned = -0.00160296 Jy ! Component: 600 - total flux cleaned = -0.001748 Jy ! Component: 650 - total flux cleaned = -0.00188942 Jy ! Component: 700 - total flux cleaned = -0.00202571 Jy ! Component: 750 - total flux cleaned = -0.00215803 Jy ! Component: 800 - total flux cleaned = -0.00220138 Jy ! Component: 850 - total flux cleaned = -0.00232745 Jy ! Component: 900 - total flux cleaned = -0.002162 Jy ! Component: 950 - total flux cleaned = -0.00208214 Jy ! Component: 1000 - total flux cleaned = -0.0019645 Jy ! Component: 1050 - total flux cleaned = -0.0019644 Jy ! Component: 1100 - total flux cleaned = -0.00196307 Jy ! Component: 1150 - total flux cleaned = -0.00199989 Jy ! Component: 1200 - total flux cleaned = -0.00196339 Jy ! Component: 1250 - total flux cleaned = -0.00203548 Jy ! Component: 1300 - total flux cleaned = -0.0021061 Jy ! Component: 1350 - total flux cleaned = -0.00214103 Jy ! Component: 1400 - total flux cleaned = -0.00217607 Jy ! Component: 1450 - total flux cleaned = -0.00237845 Jy ! Component: 1500 - total flux cleaned = -0.00241122 Jy ! Component: 1550 - total flux cleaned = -0.00247666 Jy ! Component: 1600 - total flux cleaned = -0.00254083 Jy ! Component: 1650 - total flux cleaned = -0.00260441 Jy ! Component: 1700 - total flux cleaned = -0.00257317 Jy ! Component: 1750 - total flux cleaned = -0.00272849 Jy ! Component: 1800 - total flux cleaned = -0.00269816 Jy ! Component: 1850 - total flux cleaned = -0.00275815 Jy ! Component: 1900 - total flux cleaned = -0.00278811 Jy ! Component: 1950 - total flux cleaned = -0.00278795 Jy ! Component: 2000 - total flux cleaned = -0.00275864 Jy ! Component: 2050 - total flux cleaned = -0.00275905 Jy ! Component: 2100 - total flux cleaned = -0.00281634 Jy ! Component: 2150 - total flux cleaned = -0.00287297 Jy ! Component: 2200 - total flux cleaned = -0.00290093 Jy ! Component: 2250 - total flux cleaned = -0.00295569 Jy ! Component: 2300 - total flux cleaned = -0.00303763 Jy ! Component: 2350 - total flux cleaned = -0.00303757 Jy ! Component: 2400 - total flux cleaned = -0.00311829 Jy ! Component: 2450 - total flux cleaned = -0.00325161 Jy ! Component: 2500 - total flux cleaned = -0.00340952 Jy ! Component: 2550 - total flux cleaned = -0.00353988 Jy ! Component: 2600 - total flux cleaned = -0.00359165 Jy ! Component: 2650 - total flux cleaned = -0.00364314 Jy ! Component: 2700 - total flux cleaned = -0.00377053 Jy ! Component: 2750 - total flux cleaned = -0.00382102 Jy ! Component: 2800 - total flux cleaned = -0.00387106 Jy ! Component: 2850 - total flux cleaned = -0.00392082 Jy ! Component: 2900 - total flux cleaned = -0.0039951 Jy ! Component: 2950 - total flux cleaned = -0.00406905 Jy ! Component: 3000 - total flux cleaned = -0.00416659 Jy ! Component: 3050 - total flux cleaned = -0.00428765 Jy ! Component: 3100 - total flux cleaned = -0.00433564 Jy ! Component: 3150 - total flux cleaned = -0.00435956 Jy ! Component: 3200 - total flux cleaned = -0.00445489 Jy ! Component: 3250 - total flux cleaned = -0.00447861 Jy ! Component: 3300 - total flux cleaned = -0.00454927 Jy ! Component: 3350 - total flux cleaned = -0.00464304 Jy ! Component: 3400 - total flux cleaned = -0.00461957 Jy ! Component: 3450 - total flux cleaned = -0.0047126 Jy ! Component: 3500 - total flux cleaned = -0.00473578 Jy ! Component: 3550 - total flux cleaned = -0.00485111 Jy ! Component: 3600 - total flux cleaned = -0.004828 Jy ! Component: 3650 - total flux cleaned = -0.0049195 Jy ! Component: 3700 - total flux cleaned = -0.00487385 Jy ! Component: 3750 - total flux cleaned = -0.00489657 Jy ! Component: 3800 - total flux cleaned = -0.00491924 Jy ! Component: 3850 - total flux cleaned = -0.00494179 Jy ! Component: 3900 - total flux cleaned = -0.00498684 Jy ! Component: 3950 - total flux cleaned = -0.00503172 Jy ! Component: 4000 - total flux cleaned = -0.00500927 Jy ! Component: 4050 - total flux cleaned = -0.00505405 Jy ! Total flux subtracted in 4096 components = -0.0051211 Jy ! Clean residual min=-0.001233 max=0.001256 Jy/beam ! Clean residual mean=0.000000 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.183896 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 322 components and 0.183896 Jy ![Exited script file: muppet] wmap "J1510+5702_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.916 x 9.716 at 5.718 degrees (North through East) ! Clean map min=-0.0028889 max=0.17603 Jy/beam ! Writing clean map to FITS file: J1510+5702_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.176028 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000360993 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.615233 0.615233 1.23047 2.46093 4.92186 9.84372 19.6874 39.3749 78.7498 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.176 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.916 x 9.716 at 5.718 degrees (North through East) ! Clean map min=-0.0028889 max=0.17603 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1510+5702_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:12:18 2019