! Started logfile: J1509+1611_S_2017_08_05_pus_uvs.log on Thu May 9 19:32:24 2019 obs J1509+1611_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1509+1611_S_2017_08_05_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.958201 visibilities/baseline/integration-bin. ! Found source: J1509+1611 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 14488 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1509+1611_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 521 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.917336Jy sigma=0.008952 ! Fit after self-cal, rms=0.911799Jy sigma=0.008902 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=6.723 mas, bpa=-4.955 degrees ! Estimated noise=977.181 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0698943 Jy ! Component: 100 - total flux cleaned = 0.0851358 Jy ! Total flux subtracted in 100 components = 0.0851358 Jy ! Clean residual min=-0.003319 max=0.004252 Jy/beam ! Clean residual mean=-0.000003 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.0851358 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.0851358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074551Jy sigma=0.000674 ! Fit after self-cal, rms=0.074542Jy sigma=0.000674 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=7.535 mas, bpa=-3.91 degrees ! Estimated noise=720.076 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043476 Jy ! Component: 100 - total flux cleaned = 0.00645763 Jy ! Component: 150 - total flux cleaned = 0.00774376 Jy ! Component: 200 - total flux cleaned = 0.00832738 Jy ! Total flux subtracted in 200 components = 0.00832738 Jy ! Clean residual min=-0.002830 max=0.003534 Jy/beam ! Clean residual mean=0.000001 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.0934632 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0934632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074222Jy sigma=0.000672 ! Fit after self-cal, rms=0.074229Jy sigma=0.000672 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.07 HN 0.93 KP 1.08 ! LA 0.99 MK 1.03 NL 0.86 OV 1.02 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.14 HN 0.93 KP 1.00 ! LA 0.97 MK 1.00 NL 1.00 OV 1.02 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.21 HN 0.95 KP 0.91 ! LA 0.77 MK 1.06 NL 1.15 OV 0.99 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.21 HN 0.94 KP 1.00* ! LA 1.00* MK 1.19 NL 1.00* OV 1.00* ! PT 0.90 SC 1.00* ! ! ! Fit before self-cal, rms=0.074229Jy sigma=0.000672 ! Fit after self-cal, rms=0.072073Jy sigma=0.000665 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=7.518 mas, bpa=-3.693 degrees ! Estimated noise=719.962 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.25026e-05 Jy ! Component: 100 - total flux cleaned = 0.0001133 Jy ! Component: 150 - total flux cleaned = 0.000113387 Jy ! Component: 200 - total flux cleaned = 8.21261e-05 Jy ! Total flux subtracted in 200 components = 8.21261e-05 Jy ! Clean residual min=-0.002260 max=0.002495 Jy/beam ! Clean residual mean=-0.000000 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0935454 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.0935454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072064Jy sigma=0.000664 ! Fit after self-cal, rms=0.072086Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072086Jy sigma=0.000664 ! Fit after self-cal, rms=0.072457Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=7.525 mas, bpa=-3.582 degrees ! Estimated noise=721.437 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000182117 Jy ! Component: 100 - total flux cleaned = 0.000269706 Jy ! Component: 150 - total flux cleaned = 0.000269905 Jy ! Component: 200 - total flux cleaned = 0.000269406 Jy ! Total flux subtracted in 200 components = 0.000269406 Jy ! Clean residual min=-0.001902 max=0.001748 Jy/beam ! Clean residual mean=0.000002 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0938148 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 33 components and 0.0938148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072450Jy sigma=0.000661 ! Fit after self-cal, rms=0.072483Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.26336e-07 Jy ! Component: 100 - total flux cleaned = -1.16675e-05 Jy ! Component: 150 - total flux cleaned = -1.13394e-05 Jy ! Component: 200 - total flux cleaned = -3.25096e-05 Jy ! Total flux subtracted in 200 components = -3.25096e-05 Jy ! Clean residual min=-0.001916 max=0.001777 Jy/beam ! Clean residual mean=0.000002 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0937823 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.0937823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072480Jy sigma=0.000660 ! Fit after self-cal, rms=0.072479Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072479Jy sigma=0.000660 ! Fit after self-cal, rms=0.072811Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=7.524 mas, bpa=-3.563 degrees ! Estimated noise=721.293 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.75519e-07 Jy ! Component: 100 - total flux cleaned = 9.93483e-06 Jy ! Component: 150 - total flux cleaned = 9.80256e-06 Jy ! Component: 200 - total flux cleaned = 9.36536e-07 Jy ! Total flux subtracted in 200 components = 9.36536e-07 Jy ! Clean residual min=-0.001750 max=0.001770 Jy/beam ! Clean residual mean=0.000003 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0937832 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.0937832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072809Jy sigma=0.000660 ! Fit after self-cal, rms=0.072822Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.03117e-05 Jy ! Component: 100 - total flux cleaned = -1.89954e-05 Jy ! Component: 150 - total flux cleaned = -3.48763e-05 Jy ! Component: 200 - total flux cleaned = -4.23464e-05 Jy ! Total flux subtracted in 200 components = -4.23464e-05 Jy ! Clean residual min=-0.001761 max=0.001764 Jy/beam ! Clean residual mean=0.000003 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0937409 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.0937408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072820Jy sigma=0.000660 ! Fit after self-cal, rms=0.072820Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072820Jy sigma=0.000660 ! Fit after self-cal, rms=0.072891Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.266 mas, bmaj=11.22 mas, bpa=-9 degrees ! Estimated noise=913.564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0001201 Jy ! Component: 100 - total flux cleaned = -8.7414e-05 Jy ! Component: 150 - total flux cleaned = -6.28664e-05 Jy ! Component: 200 - total flux cleaned = -4.42489e-05 Jy ! Total flux subtracted in 200 components = -4.42489e-05 Jy ! Clean residual min=-0.001864 max=0.001987 Jy/beam ! Clean residual mean=0.000008 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0936966 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 42 components and 0.0936966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072892Jy sigma=0.000660 ! Fit after self-cal, rms=0.072892Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.49961e-05 Jy ! Component: 100 - total flux cleaned = 9.3999e-06 Jy ! Component: 150 - total flux cleaned = 2.72056e-05 Jy ! Component: 200 - total flux cleaned = 3.42703e-05 Jy ! Total flux subtracted in 200 components = 3.42703e-05 Jy ! Clean residual min=-0.001868 max=0.001990 Jy/beam ! Clean residual mean=0.000008 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0937309 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.0937309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072894Jy sigma=0.000660 ! Fit after self-cal, rms=0.072893Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=7.523 mas, bpa=-3.543 degrees ! Estimated noise=721.618 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.251 x 7.523 at -3.543 degrees (North through East) ! Clean map min=-0.001692 max=0.089481 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.777 mas, bmaj=6.735 mas, bpa=-4.554 degrees ! Estimated noise=987.656 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.070515 Jy ! Component: 100 - total flux cleaned = 0.0860021 Jy ! Component: 150 - total flux cleaned = 0.0898565 Jy ! Component: 200 - total flux cleaned = 0.0915018 Jy ! Total flux subtracted in 200 components = 0.0915018 Jy ! Clean residual min=-0.002488 max=0.002527 Jy/beam ! Clean residual mean=0.000002 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.0915018 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0915018 Jy ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=7.523 mas, bpa=-3.543 degrees ! Estimated noise=721.618 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000756476 Jy ! Component: 100 - total flux cleaned = 0.00111571 Jy ! Component: 150 - total flux cleaned = 0.00134463 Jy ! Component: 200 - total flux cleaned = 0.00153129 Jy ! Total flux subtracted in 200 components = 0.00153129 Jy ! Clean residual min=-0.001788 max=0.001730 Jy/beam ! Clean residual mean=0.000003 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0930331 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 27 components and 0.0930331 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.266 mas, bmaj=11.22 mas, bpa=-9 degrees ! Estimated noise=913.564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000197134 Jy ! Component: 100 - total flux cleaned = 0.00026026 Jy ! Component: 150 - total flux cleaned = 0.000322203 Jy ! Component: 200 - total flux cleaned = 0.000354296 Jy ! Total flux subtracted in 200 components = 0.000354296 Jy ! Clean residual min=-0.001875 max=0.001986 Jy/beam ! Clean residual mean=0.000008 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.0933874 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.8733e-05 Jy ! Component: 100 - total flux cleaned = 6.56456e-05 Jy ! Component: 150 - total flux cleaned = 9.86839e-05 Jy ! Component: 200 - total flux cleaned = 0.00012144 Jy ! Total flux subtracted in 200 components = 0.00012144 Jy ! Clean residual min=-0.001875 max=0.001991 Jy/beam ! Clean residual mean=0.000008 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.0935088 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 39 components and 0.0935088 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=7.523 mas, bpa=-3.543 degrees ! Estimated noise=721.618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.67863e-05 Jy ! Component: 100 - total flux cleaned = 6.80166e-05 Jy ! Component: 150 - total flux cleaned = 6.83237e-05 Jy ! Component: 200 - total flux cleaned = 6.85942e-05 Jy ! Total flux subtracted in 200 components = 6.85942e-05 Jy ! Clean residual min=-0.001779 max=0.001740 Jy/beam ! Clean residual mean=0.000004 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0935774 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.0935774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072898Jy sigma=0.000660 ! Fit after self-cal, rms=0.072894Jy sigma=0.000660 wmodel J1509+1611_S_2017_08_05_pus_map.mod ! Writing 45 model components to file: J1509+1611_S_2017_08_05_pus_map.mod wobs J1509+1611_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1509+1611_S_2017_08_05_pus_uvs.fits wwins J1509+1611_S_2017_08_05_pus_map.win ! wwins: Wrote 1 windows to J1509+1611_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000302074 Jy ! Component: 100 - total flux cleaned = -0.000543018 Jy ! Component: 150 - total flux cleaned = -0.000888622 Jy ! Component: 200 - total flux cleaned = -0.00119304 Jy ! Component: 250 - total flux cleaned = -0.00146129 Jy ! Component: 300 - total flux cleaned = -0.00167092 Jy ! Component: 350 - total flux cleaned = -0.0018752 Jy ! Component: 400 - total flux cleaned = -0.00212434 Jy ! Component: 450 - total flux cleaned = -0.00227053 Jy ! Component: 500 - total flux cleaned = -0.00243794 Jy ! Component: 550 - total flux cleaned = -0.00257889 Jy ! Component: 600 - total flux cleaned = -0.0026713 Jy ! Component: 650 - total flux cleaned = -0.0027843 Jy ! Component: 700 - total flux cleaned = -0.00287307 Jy ! Component: 750 - total flux cleaned = -0.00296011 Jy ! Component: 800 - total flux cleaned = -0.00302439 Jy ! Component: 850 - total flux cleaned = -0.00308791 Jy ! Component: 900 - total flux cleaned = -0.00323357 Jy ! Component: 950 - total flux cleaned = -0.00337743 Jy ! Component: 1000 - total flux cleaned = -0.00347869 Jy ! Component: 1050 - total flux cleaned = -0.00361837 Jy ! Component: 1100 - total flux cleaned = -0.00371698 Jy ! Component: 1150 - total flux cleaned = -0.00383405 Jy ! Component: 1200 - total flux cleaned = -0.00394934 Jy ! Component: 1250 - total flux cleaned = -0.00400646 Jy ! Component: 1300 - total flux cleaned = -0.00419431 Jy ! Component: 1350 - total flux cleaned = -0.00432418 Jy ! Component: 1400 - total flux cleaned = -0.00447065 Jy ! Component: 1450 - total flux cleaned = -0.00461535 Jy ! Component: 1500 - total flux cleaned = -0.00470479 Jy ! Component: 1550 - total flux cleaned = -0.00479334 Jy ! Component: 1600 - total flux cleaned = -0.00489859 Jy ! Component: 1650 - total flux cleaned = -0.00500282 Jy ! Component: 1700 - total flux cleaned = -0.00510601 Jy ! Component: 1750 - total flux cleaned = -0.0051569 Jy ! Component: 1800 - total flux cleaned = -0.005258 Jy ! Component: 1850 - total flux cleaned = -0.00534125 Jy ! Component: 1900 - total flux cleaned = -0.00539081 Jy ! Component: 1950 - total flux cleaned = -0.00545609 Jy ! Component: 2000 - total flux cleaned = -0.00553684 Jy ! Component: 2050 - total flux cleaned = -0.00560088 Jy ! Component: 2100 - total flux cleaned = -0.0056486 Jy ! Component: 2150 - total flux cleaned = -0.00574326 Jy ! Component: 2200 - total flux cleaned = -0.00575883 Jy ! Component: 2250 - total flux cleaned = -0.00586727 Jy ! Component: 2300 - total flux cleaned = -0.00585196 Jy ! Component: 2350 - total flux cleaned = -0.00594323 Jy ! Component: 2400 - total flux cleaned = -0.00592808 Jy ! Component: 2450 - total flux cleaned = -0.00600287 Jy ! Component: 2500 - total flux cleaned = -0.00601752 Jy ! Component: 2550 - total flux cleaned = -0.00609111 Jy ! Component: 2600 - total flux cleaned = -0.00612015 Jy ! Component: 2650 - total flux cleaned = -0.00616354 Jy ! Component: 2700 - total flux cleaned = -0.00623523 Jy ! Component: 2750 - total flux cleaned = -0.00626371 Jy ! Component: 2800 - total flux cleaned = -0.00626368 Jy ! Component: 2850 - total flux cleaned = -0.00629159 Jy ! Component: 2900 - total flux cleaned = -0.00630568 Jy ! Component: 2950 - total flux cleaned = -0.00634728 Jy ! Component: 3000 - total flux cleaned = -0.00631968 Jy ! Component: 3050 - total flux cleaned = -0.00640137 Jy ! Component: 3100 - total flux cleaned = -0.00637423 Jy ! Component: 3150 - total flux cleaned = -0.00638751 Jy ! Component: 3200 - total flux cleaned = -0.00637414 Jy ! Component: 3250 - total flux cleaned = -0.00630778 Jy ! Component: 3300 - total flux cleaned = -0.00638678 Jy ! Component: 3350 - total flux cleaned = -0.00638691 Jy ! Component: 3400 - total flux cleaned = -0.00637394 Jy ! Component: 3450 - total flux cleaned = -0.00637383 Jy ! Component: 3500 - total flux cleaned = -0.00638671 Jy ! Component: 3550 - total flux cleaned = -0.00645063 Jy ! Component: 3600 - total flux cleaned = -0.00646318 Jy ! Component: 3650 - total flux cleaned = -0.0064759 Jy ! Component: 3700 - total flux cleaned = -0.00650085 Jy ! Component: 3750 - total flux cleaned = -0.00646341 Jy ! Component: 3800 - total flux cleaned = -0.0064758 Jy ! Component: 3850 - total flux cleaned = -0.00653718 Jy ! Component: 3900 - total flux cleaned = -0.0065495 Jy ! Component: 3950 - total flux cleaned = -0.00659818 Jy ! Component: 4000 - total flux cleaned = -0.00659822 Jy ! Component: 4050 - total flux cleaned = -0.0066221 Jy ! Total flux subtracted in 4096 components = -0.00663396 Jy ! Clean residual min=-0.000694 max=0.000699 Jy/beam ! Clean residual mean=0.000002 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.0869434 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 359 components and 0.0869434 Jy ![Exited script file: muppet] wmap "J1509+1611_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.251 x 7.523 at -3.543 degrees (North through East) ! Clean map min=-0.0015057 max=0.089547 Jy/beam ! Writing clean map to FITS file: J1509+1611_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0895471 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000226064 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.757359 0.757359 1.51472 3.02943 6.05887 12.1177 24.2355 48.471 96.9419 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.089 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.251 x 7.523 at -3.543 degrees (North through East) ! Clean map min=-0.0015057 max=0.089547 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1509+1611_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:32:30 2019