! Started logfile: J1508-4953_S_2017_06_15_pus_uvs.log on Tue May 7 15:22:25 2019 obs J1508-4953_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1508-4953_S_2017_06_15_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.31433 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1508-4953 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 8204 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1508-4953_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 606 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 606 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 809 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1039 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.566416Jy sigma=0.003408 ! Fit after self-cal, rms=0.561469Jy sigma=0.003380 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.578 mas, bmaj=25.73 mas, bpa=-16.18 degrees ! Estimated noise=2531.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.311121 Jy ! Component: 100 - total flux cleaned = 0.395497 Jy ! Total flux subtracted in 100 components = 0.395497 Jy ! Clean residual min=-0.025874 max=0.041960 Jy/beam ! Clean residual mean=-0.001122 rms=0.010384 Jy/beam ! Combined flux in latest and established models = 0.395497 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.395497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185691Jy sigma=0.001020 ! Fit after self-cal, rms=0.185658Jy sigma=0.001019 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=28.44 mas, bpa=-15.71 degrees ! Estimated noise=1619.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0882698 Jy ! Component: 100 - total flux cleaned = 0.137384 Jy ! Component: 150 - total flux cleaned = 0.167809 Jy ! Component: 200 - total flux cleaned = 0.186886 Jy ! Total flux subtracted in 200 components = 0.186886 Jy ! Clean residual min=-0.017165 max=0.021974 Jy/beam ! Clean residual mean=-0.000042 rms=0.007991 Jy/beam ! Combined flux in latest and established models = 0.582384 Jy ! Performing phase self-cal ! Adding 82 model components to the UV plane model. ! The established model now contains 104 components and 0.582384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130185Jy sigma=0.000758 ! Fit after self-cal, rms=0.129957Jy sigma=0.000758 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.00* KP 0.99 ! LA 0.98 MK 1.03 NL 1.00* OV 1.28 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00* KP 0.95 ! LA 0.94 MK 1.01 NL 1.00* OV 1.26 ! PT 0.95 SC 1.00* ! ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 0.94 ! LA 1.34 MK 1.04 NL 1.00* OV 1.12 ! PT 0.92 SC 1.00* ! ! ! Correcting IF 4. ! A total of 411 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.129957Jy sigma=0.000758 ! Fit after self-cal, rms=0.121092Jy sigma=0.000676 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.396 mas, bmaj=29.38 mas, bpa=-15.88 degrees ! Estimated noise=1721.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00642868 Jy ! Component: 100 - total flux cleaned = -0.00760094 Jy ! Component: 150 - total flux cleaned = -0.00835309 Jy ! Component: 200 - total flux cleaned = -0.00899455 Jy ! Total flux subtracted in 200 components = -0.00899455 Jy ! Clean residual min=-0.011335 max=0.009337 Jy/beam ! Clean residual mean=0.000091 rms=0.003367 Jy/beam ! Combined flux in latest and established models = 0.573389 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 115 components and 0.573389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119778Jy sigma=0.000670 ! Fit after self-cal, rms=0.119849Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119849Jy sigma=0.000670 ! Fit after self-cal, rms=0.120338Jy sigma=0.000669 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.396 mas, bmaj=29.48 mas, bpa=-15.88 degrees ! Estimated noise=1722.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0037594 Jy ! Component: 100 - total flux cleaned = -0.0046386 Jy ! Component: 150 - total flux cleaned = -0.00558254 Jy ! Component: 200 - total flux cleaned = -0.00622817 Jy ! Total flux subtracted in 200 components = -0.00622817 Jy ! Clean residual min=-0.009627 max=0.008739 Jy/beam ! Clean residual mean=0.000105 rms=0.002948 Jy/beam ! Combined flux in latest and established models = 0.567161 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 121 components and 0.567161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119562Jy sigma=0.000666 ! Fit after self-cal, rms=0.119557Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00057855 Jy ! Component: 100 - total flux cleaned = -0.00118722 Jy ! Component: 150 - total flux cleaned = -0.00140305 Jy ! Component: 200 - total flux cleaned = -0.00158968 Jy ! Total flux subtracted in 200 components = -0.00158968 Jy ! Clean residual min=-0.008755 max=0.008579 Jy/beam ! Clean residual mean=0.000087 rms=0.002901 Jy/beam ! Combined flux in latest and established models = 0.565571 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 131 components and 0.565571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119293Jy sigma=0.000665 ! Fit after self-cal, rms=0.119284Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119284Jy sigma=0.000665 ! Fit after self-cal, rms=0.118580Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=29.65 mas, bpa=-15.87 degrees ! Estimated noise=1726.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00240671 Jy ! Component: 100 - total flux cleaned = -0.00278449 Jy ! Component: 150 - total flux cleaned = -0.00311442 Jy ! Component: 200 - total flux cleaned = -0.00321295 Jy ! Total flux subtracted in 200 components = -0.00321295 Jy ! Clean residual min=-0.006234 max=0.004033 Jy/beam ! Clean residual mean=0.000098 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 0.562358 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 152 components and 0.562358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118318Jy sigma=0.000655 ! Fit after self-cal, rms=0.118308Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000190919 Jy ! Component: 100 - total flux cleaned = -0.000357179 Jy ! Component: 150 - total flux cleaned = -0.000431304 Jy ! Component: 200 - total flux cleaned = -0.000502668 Jy ! Total flux subtracted in 200 components = -0.000502668 Jy ! Clean residual min=-0.005729 max=0.003950 Jy/beam ! Clean residual mean=0.000089 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 0.561856 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 155 components and 0.561856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118182Jy sigma=0.000655 ! Fit after self-cal, rms=0.118177Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118177Jy sigma=0.000655 ! Fit after self-cal, rms=0.118629Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.08 mas, bmaj=48.54 mas, bpa=-4.46 degrees ! Estimated noise=2120.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000586575 Jy ! Component: 100 - total flux cleaned = -0.000827551 Jy ! Component: 150 - total flux cleaned = -0.00105344 Jy ! Component: 200 - total flux cleaned = -0.00119551 Jy ! Total flux subtracted in 200 components = -0.00119551 Jy ! Clean residual min=-0.005982 max=0.004339 Jy/beam ! Clean residual mean=0.000151 rms=0.001870 Jy/beam ! Combined flux in latest and established models = 0.56066 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 166 components and 0.56066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118494Jy sigma=0.000654 ! Fit after self-cal, rms=0.118499Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000205887 Jy ! Component: 100 - total flux cleaned = -0.000395879 Jy ! Component: 150 - total flux cleaned = -0.000517534 Jy ! Component: 200 - total flux cleaned = -0.000688692 Jy ! Total flux subtracted in 200 components = -0.000688692 Jy ! Clean residual min=-0.005811 max=0.004201 Jy/beam ! Clean residual mean=0.000135 rms=0.001817 Jy/beam ! Combined flux in latest and established models = 0.559971 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 175 components and 0.559971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118436Jy sigma=0.000654 ! Fit after self-cal, rms=0.118433Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=29.7 mas, bpa=-15.87 degrees ! Estimated noise=1728.75 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.391 x 29.7 at -15.87 degrees (North through East) ! Clean map min=-0.0076353 max=0.36385 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=26.39 mas, bpa=-16.26 degrees ! Estimated noise=2680.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.328403 Jy ! Component: 100 - total flux cleaned = 0.423298 Jy ! Component: 150 - total flux cleaned = 0.474319 Jy ! Component: 200 - total flux cleaned = 0.502544 Jy ! Total flux subtracted in 200 components = 0.502544 Jy ! Clean residual min=-0.009888 max=0.014557 Jy/beam ! Clean residual mean=-0.000378 rms=0.003692 Jy/beam ! Combined flux in latest and established models = 0.502544 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.502544 Jy ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=29.7 mas, bpa=-15.87 degrees ! Estimated noise=1728.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0255655 Jy ! Component: 100 - total flux cleaned = 0.0385922 Jy ! Component: 150 - total flux cleaned = 0.0460258 Jy ! Component: 200 - total flux cleaned = 0.0503659 Jy ! Total flux subtracted in 200 components = 0.0503659 Jy ! Clean residual min=-0.006177 max=0.006035 Jy/beam ! Clean residual mean=-0.000048 rms=0.001954 Jy/beam ! Combined flux in latest and established models = 0.55291 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 94 components and 0.55291 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.08 mas, bmaj=48.54 mas, bpa=-4.46 degrees ! Estimated noise=2120.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197135 Jy ! Component: 100 - total flux cleaned = 0.00209791 Jy ! Component: 150 - total flux cleaned = 0.00221303 Jy ! Component: 200 - total flux cleaned = 0.0022112 Jy ! Total flux subtracted in 200 components = 0.0022112 Jy ! Clean residual min=-0.006757 max=0.005614 Jy/beam ! Clean residual mean=-0.000027 rms=0.002432 Jy/beam ! Combined flux in latest and established models = 0.555121 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.97629e-05 Jy ! Component: 100 - total flux cleaned = 0.000199 Jy ! Component: 150 - total flux cleaned = 0.000287955 Jy ! Component: 200 - total flux cleaned = 0.00037094 Jy ! Total flux subtracted in 200 components = 0.00037094 Jy ! Clean residual min=-0.005956 max=0.005253 Jy/beam ! Clean residual mean=-0.000011 rms=0.002263 Jy/beam ! Combined flux in latest and established models = 0.555492 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 101 components and 0.555492 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=29.7 mas, bpa=-15.87 degrees ! Estimated noise=1728.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.16155e-05 Jy ! Component: 100 - total flux cleaned = 0.000212386 Jy ! Component: 150 - total flux cleaned = 0.000348536 Jy ! Component: 200 - total flux cleaned = 0.000410401 Jy ! Total flux subtracted in 200 components = 0.000410401 Jy ! Clean residual min=-0.004967 max=0.004965 Jy/beam ! Clean residual mean=-0.000000 rms=0.001563 Jy/beam ! Combined flux in latest and established models = 0.555902 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 126 components and 0.555903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118288Jy sigma=0.000655 ! Fit after self-cal, rms=0.118266Jy sigma=0.000655 wmodel J1508-4953_S_2017_06_15_pus_map.mod ! Writing 126 model components to file: J1508-4953_S_2017_06_15_pus_map.mod wobs J1508-4953_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1508-4953_S_2017_06_15_pus_uvs.fits wwins J1508-4953_S_2017_06_15_pus_map.win ! wwins: Wrote 1 windows to J1508-4953_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000519084 Jy ! Component: 100 - total flux cleaned = 0.00155854 Jy ! Component: 150 - total flux cleaned = 0.00206411 Jy ! Component: 200 - total flux cleaned = 0.00246285 Jy ! Component: 250 - total flux cleaned = 0.00295736 Jy ! Component: 300 - total flux cleaned = 0.00318826 Jy ! Component: 350 - total flux cleaned = 0.00329537 Jy ! Component: 400 - total flux cleaned = 0.00345158 Jy ! Component: 450 - total flux cleaned = 0.00325898 Jy ! Component: 500 - total flux cleaned = 0.00307698 Jy ! Component: 550 - total flux cleaned = 0.00298957 Jy ! Component: 600 - total flux cleaned = 0.00252421 Jy ! Component: 650 - total flux cleaned = 0.00219896 Jy ! Component: 700 - total flux cleaned = 0.00192433 Jy ! Component: 750 - total flux cleaned = 0.00161942 Jy ! Component: 800 - total flux cleaned = 0.00117671 Jy ! Component: 850 - total flux cleaned = 0.000673962 Jy ! Component: 900 - total flux cleaned = 0.000254964 Jy ! Component: 950 - total flux cleaned = -5.2515e-05 Jy ! Component: 1000 - total flux cleaned = -0.000517626 Jy ! Component: 1050 - total flux cleaned = -0.000841387 Jy ! Component: 1100 - total flux cleaned = -0.00115825 Jy ! Component: 1150 - total flux cleaned = -0.00159193 Jy ! Component: 1200 - total flux cleaned = -0.00183464 Jy ! Component: 1250 - total flux cleaned = -0.00216202 Jy ! Component: 1300 - total flux cleaned = -0.00242415 Jy ! Component: 1350 - total flux cleaned = -0.00259554 Jy ! Component: 1400 - total flux cleaned = -0.00265205 Jy ! Component: 1450 - total flux cleaned = -0.00279126 Jy ! Component: 1500 - total flux cleaned = -0.0029817 Jy ! Component: 1550 - total flux cleaned = -0.00311574 Jy ! Component: 1600 - total flux cleaned = -0.00319512 Jy ! Component: 1650 - total flux cleaned = -0.00329929 Jy ! Component: 1700 - total flux cleaned = -0.00329967 Jy ! Component: 1750 - total flux cleaned = -0.00342612 Jy ! Component: 1800 - total flux cleaned = -0.00340055 Jy ! Component: 1850 - total flux cleaned = -0.00330168 Jy ! Component: 1900 - total flux cleaned = -0.00332628 Jy ! Component: 1950 - total flux cleaned = -0.00330184 Jy ! Component: 2000 - total flux cleaned = -0.00330199 Jy ! Component: 2050 - total flux cleaned = -0.00320699 Jy ! Component: 2100 - total flux cleaned = -0.00308928 Jy ! Component: 2150 - total flux cleaned = -0.00292641 Jy ! Component: 2200 - total flux cleaned = -0.00285717 Jy ! Component: 2250 - total flux cleaned = -0.00271943 Jy ! Component: 2300 - total flux cleaned = -0.00269668 Jy ! Component: 2350 - total flux cleaned = -0.00256014 Jy ! Component: 2400 - total flux cleaned = -0.0026053 Jy ! Component: 2450 - total flux cleaned = -0.00249235 Jy ! Component: 2500 - total flux cleaned = -0.00242505 Jy ! Component: 2550 - total flux cleaned = -0.0023802 Jy ! Component: 2600 - total flux cleaned = -0.00235784 Jy ! Component: 2650 - total flux cleaned = -0.00233548 Jy ! Component: 2700 - total flux cleaned = -0.00229083 Jy ! Component: 2750 - total flux cleaned = -0.00224617 Jy ! Component: 2800 - total flux cleaned = -0.00222387 Jy ! Component: 2850 - total flux cleaned = -0.00217918 Jy ! Component: 2900 - total flux cleaned = -0.00213448 Jy ! Component: 2950 - total flux cleaned = -0.00208978 Jy ! Component: 3000 - total flux cleaned = -0.00206728 Jy ! Component: 3050 - total flux cleaned = -0.00206718 Jy ! Component: 3100 - total flux cleaned = -0.00206716 Jy ! Component: 3150 - total flux cleaned = -0.00206716 Jy ! Component: 3200 - total flux cleaned = -0.00204444 Jy ! Component: 3250 - total flux cleaned = -0.00206724 Jy ! Component: 3300 - total flux cleaned = -0.00220468 Jy ! Component: 3350 - total flux cleaned = -0.00225086 Jy ! Component: 3400 - total flux cleaned = -0.0022971 Jy ! Component: 3450 - total flux cleaned = -0.00243634 Jy ! Component: 3500 - total flux cleaned = -0.00248322 Jy ! Component: 3550 - total flux cleaned = -0.00253012 Jy ! Component: 3600 - total flux cleaned = -0.00257725 Jy ! Component: 3650 - total flux cleaned = -0.00274298 Jy ! Component: 3700 - total flux cleaned = -0.00281432 Jy ! Component: 3750 - total flux cleaned = -0.002886 Jy ! Component: 3800 - total flux cleaned = -0.00298224 Jy ! Component: 3850 - total flux cleaned = -0.00307939 Jy ! Component: 3900 - total flux cleaned = -0.00320168 Jy ! Component: 3950 - total flux cleaned = -0.00327564 Jy ! Component: 4000 - total flux cleaned = -0.0034243 Jy ! Component: 4050 - total flux cleaned = -0.0035741 Jy ! Total flux subtracted in 4096 components = -0.00372481 Jy ! Clean residual min=-0.001416 max=0.001426 Jy/beam ! Clean residual mean=-0.000015 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.552178 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 368 components and 0.552178 Jy ![Exited script file: muppet] wmap "J1508-4953_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.391 x 29.7 at -15.87 degrees (North through East) ! Clean map min=-0.0032383 max=0.42478 Jy/beam ! Writing clean map to FITS file: J1508-4953_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.424776 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000479576 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.338702 0.338702 0.677405 1.35481 2.70962 5.41924 10.8385 21.677 43.3539 86.7078 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.424 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.391 x 29.7 at -15.87 degrees (North through East) ! Clean map min=-0.0032383 max=0.42478 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1508-4953_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:22:30 2019