! Started logfile: J1506+8319_S_2017_07_09_pus_uvs.log on Wed May 8 14:51:48 2019 obs J1506+8319_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1506+8319_S_2017_07_09_pus_uva.fits ! AN table 1: 151 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.953201 visibilities/baseline/integration-bin. ! Found source: J1506+8319 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 25908 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1506+8319_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 807 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.768370Jy sigma=0.006515 ! Fit after self-cal, rms=0.734175Jy sigma=0.006245 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=3.411 mas, bpa=47.8 degrees ! Estimated noise=955.688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.204412 Jy ! Component: 100 - total flux cleaned = 0.25017 Jy ! Total flux subtracted in 100 components = 0.25017 Jy ! Clean residual min=-0.006707 max=0.017601 Jy/beam ! Clean residual mean=-0.000071 rms=0.001833 Jy/beam ! Combined flux in latest and established models = 0.25017 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.25017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095299Jy sigma=0.000777 ! Fit after self-cal, rms=0.095291Jy sigma=0.000777 ! Inverting map ! Added new window around map position (-1, 4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190891 Jy ! Component: 100 - total flux cleaned = 0.0297492 Jy ! Total flux subtracted in 100 components = 0.0297492 Jy ! Clean residual min=-0.005862 max=0.009435 Jy/beam ! Clean residual mean=-0.000035 rms=0.001398 Jy/beam ! Combined flux in latest and established models = 0.279919 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 19 components and 0.279919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089980Jy sigma=0.000730 ! Fit after self-cal, rms=0.089855Jy sigma=0.000729 ! Inverting map ! Added new window around map position (-3.5, 9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00935991 Jy ! Component: 100 - total flux cleaned = 0.0154006 Jy ! Total flux subtracted in 100 components = 0.0154006 Jy ! Clean residual min=-0.005147 max=0.006064 Jy/beam ! Clean residual mean=-0.000019 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.29532 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.29532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088416Jy sigma=0.000716 ! Fit after self-cal, rms=0.088342Jy sigma=0.000715 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.885 mas, bmaj=4.255 mas, bpa=53.61 degrees ! Estimated noise=584.636 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00718052 Jy ! Component: 100 - total flux cleaned = 0.0113748 Jy ! Component: 150 - total flux cleaned = 0.0140173 Jy ! Component: 200 - total flux cleaned = 0.0157326 Jy ! Total flux subtracted in 200 components = 0.0157326 Jy ! Clean residual min=-0.003632 max=0.003764 Jy/beam ! Clean residual mean=-0.000011 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.311053 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 63 components and 0.311053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087699Jy sigma=0.000710 ! Fit after self-cal, rms=0.087647Jy sigma=0.000710 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.99 KP 1.03 ! LA 1.01 MK 1.03 NL 0.90 OV 1.00 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.00 KP 0.99 ! LA 0.96 MK 1.01 NL 1.03 OV 1.06 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.05 HN 1.00 KP 0.98 ! LA 0.97 MK 1.04 NL 0.98 OV 1.00 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 0.96 KP 1.00* ! LA 1.05 MK 0.99 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.087647Jy sigma=0.000710 ! Fit after self-cal, rms=0.085968Jy sigma=0.000698 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.902 mas, bmaj=4.274 mas, bpa=53.35 degrees ! Estimated noise=583.319 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266224 Jy ! Component: 100 - total flux cleaned = 0.00303478 Jy ! Component: 150 - total flux cleaned = 0.00321689 Jy ! Component: 200 - total flux cleaned = 0.00331885 Jy ! Total flux subtracted in 200 components = 0.00331885 Jy ! Clean residual min=-0.003010 max=0.003196 Jy/beam ! Clean residual mean=-0.000004 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.314371 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 80 components and 0.314371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085880Jy sigma=0.000697 ! Fit after self-cal, rms=0.085863Jy sigma=0.000697 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085863Jy sigma=0.000697 ! Fit after self-cal, rms=0.085014Jy sigma=0.000682 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.904 mas, bmaj=4.276 mas, bpa=53 degrees ! Estimated noise=584.281 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132923 Jy ! Component: 100 - total flux cleaned = 0.00148353 Jy ! Component: 150 - total flux cleaned = 0.00148495 Jy ! Component: 200 - total flux cleaned = 0.00144307 Jy ! Total flux subtracted in 200 components = 0.00144307 Jy ! Clean residual min=-0.001688 max=0.001782 Jy/beam ! Clean residual mean=-0.000009 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.315814 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 91 components and 0.315814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084984Jy sigma=0.000682 ! Fit after self-cal, rms=0.084995Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (125.5, 81.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130635 Jy ! Component: 100 - total flux cleaned = 0.00163899 Jy ! Component: 150 - total flux cleaned = 0.00175229 Jy ! Component: 200 - total flux cleaned = 0.00177645 Jy ! Total flux subtracted in 200 components = 0.00177645 Jy ! Clean residual min=-0.001540 max=0.001718 Jy/beam ! Clean residual mean=-0.000006 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.317591 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 108 components and 0.317591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084961Jy sigma=0.000681 ! Fit after self-cal, rms=0.084960Jy sigma=0.000681 ! Inverting map ! Added new window around map position (-46, 108). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178006 Jy ! Component: 100 - total flux cleaned = 0.00280568 Jy ! Component: 150 - total flux cleaned = 0.00342889 Jy ! Component: 200 - total flux cleaned = 0.00368597 Jy ! Total flux subtracted in 200 components = 0.00368597 Jy ! Clean residual min=-0.001478 max=0.001498 Jy/beam ! Clean residual mean=-0.000003 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.321277 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 125 components and 0.321277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084914Jy sigma=0.000681 ! Fit after self-cal, rms=0.084912Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084912Jy sigma=0.000681 ! Fit after self-cal, rms=0.084990Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.907 mas, bmaj=4.279 mas, bpa=53.28 degrees ! Estimated noise=584.647 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000996484 Jy ! Component: 100 - total flux cleaned = 0.00163682 Jy ! Component: 150 - total flux cleaned = 0.00187343 Jy ! Component: 200 - total flux cleaned = 0.00201551 Jy ! Total flux subtracted in 200 components = 0.00201551 Jy ! Clean residual min=-0.001462 max=0.001393 Jy/beam ! Clean residual mean=-0.000004 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.323292 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 131 components and 0.323292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084970Jy sigma=0.000681 ! Fit after self-cal, rms=0.084970Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225664 Jy ! Component: 100 - total flux cleaned = 0.00035665 Jy ! Component: 150 - total flux cleaned = 0.000437899 Jy ! Component: 200 - total flux cleaned = 0.000515072 Jy ! Total flux subtracted in 200 components = 0.000515072 Jy ! Clean residual min=-0.001449 max=0.001343 Jy/beam ! Clean residual mean=-0.000003 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.323807 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 140 components and 0.323807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084959Jy sigma=0.000680 ! Fit after self-cal, rms=0.084959Jy sigma=0.000680 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084959Jy sigma=0.000680 ! Fit after self-cal, rms=0.085022Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.596 mas, bmaj=9.163 mas, bpa=44.36 degrees ! Estimated noise=751.353 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010293 Jy ! Component: 100 - total flux cleaned = 0.00167292 Jy ! Component: 150 - total flux cleaned = 0.00186114 Jy ! Component: 200 - total flux cleaned = 0.00196891 Jy ! Total flux subtracted in 200 components = 0.00196891 Jy ! Clean residual min=-0.001516 max=0.001656 Jy/beam ! Clean residual mean=-0.000005 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.325776 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 150 components and 0.325776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085016Jy sigma=0.000680 ! Fit after self-cal, rms=0.085015Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222321 Jy ! Component: 100 - total flux cleaned = 0.000288724 Jy ! Component: 150 - total flux cleaned = 0.000323797 Jy ! Component: 200 - total flux cleaned = 0.000355564 Jy ! Total flux subtracted in 200 components = 0.000355564 Jy ! Clean residual min=-0.001546 max=0.001645 Jy/beam ! Clean residual mean=-0.000004 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.326132 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 162 components and 0.326132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085014Jy sigma=0.000680 ! Fit after self-cal, rms=0.085013Jy sigma=0.000680 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=4.28 mas, bpa=53.39 degrees ! Estimated noise=585.008 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.909 x 4.28 at 53.39 degrees (North through East) ! Clean map min=-0.0013811 max=0.26327 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=3.432 mas, bpa=49.71 degrees ! Estimated noise=962.113 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.205623 Jy ! Component: 100 - total flux cleaned = 0.25192 Jy ! Component: 150 - total flux cleaned = 0.271587 Jy ! Component: 200 - total flux cleaned = 0.283907 Jy ! Total flux subtracted in 200 components = 0.283907 Jy ! Clean residual min=-0.003261 max=0.006547 Jy/beam ! Clean residual mean=-0.000039 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.283907 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.283907 Jy ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=4.28 mas, bpa=53.39 degrees ! Estimated noise=585.008 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126165 Jy ! Component: 100 - total flux cleaned = 0.0198953 Jy ! Component: 150 - total flux cleaned = 0.0243614 Jy ! Component: 200 - total flux cleaned = 0.02737 Jy ! Total flux subtracted in 200 components = 0.02737 Jy ! Clean residual min=-0.001949 max=0.001925 Jy/beam ! Clean residual mean=-0.000025 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.311277 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 72 components and 0.311277 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.596 mas, bmaj=9.163 mas, bpa=44.36 degrees ! Estimated noise=751.353 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403677 Jy ! Component: 100 - total flux cleaned = 0.00676688 Jy ! Component: 150 - total flux cleaned = 0.00879332 Jy ! Component: 200 - total flux cleaned = 0.0103146 Jy ! Total flux subtracted in 200 components = 0.0103146 Jy ! Clean residual min=-0.001610 max=0.001848 Jy/beam ! Clean residual mean=-0.000020 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.321592 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115982 Jy ! Component: 100 - total flux cleaned = 0.00205117 Jy ! Component: 150 - total flux cleaned = 0.00258871 Jy ! Component: 200 - total flux cleaned = 0.00291809 Jy ! Total flux subtracted in 200 components = 0.00291809 Jy ! Clean residual min=-0.001494 max=0.001650 Jy/beam ! Clean residual mean=-0.000010 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.32451 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 139 components and 0.32451 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=4.28 mas, bpa=53.39 degrees ! Estimated noise=585.008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026772 Jy ! Component: 100 - total flux cleaned = 0.000492459 Jy ! Component: 150 - total flux cleaned = 0.000609475 Jy ! Component: 200 - total flux cleaned = 0.000663342 Jy ! Total flux subtracted in 200 components = 0.000663342 Jy ! Clean residual min=-0.001451 max=0.001403 Jy/beam ! Clean residual mean=-0.000003 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.325173 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 155 components and 0.325173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085046Jy sigma=0.000681 ! Fit after self-cal, rms=0.085034Jy sigma=0.000681 wmodel J1506+8319_S_2017_07_09_pus_map.mod ! Writing 155 model components to file: J1506+8319_S_2017_07_09_pus_map.mod wobs J1506+8319_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1506+8319_S_2017_07_09_pus_uvs.fits wwins J1506+8319_S_2017_07_09_pus_map.win ! wwins: Wrote 5 windows to J1506+8319_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.09173e-05 Jy ! Component: 100 - total flux cleaned = 0.000126243 Jy ! Component: 150 - total flux cleaned = 0.000173768 Jy ! Component: 200 - total flux cleaned = 5.90772e-05 Jy ! Component: 250 - total flux cleaned = 3.6745e-05 Jy ! Component: 300 - total flux cleaned = -2.9379e-05 Jy ! Component: 350 - total flux cleaned = -5.13655e-05 Jy ! Component: 400 - total flux cleaned = -0.000157702 Jy ! Component: 450 - total flux cleaned = -0.000220167 Jy ! Component: 500 - total flux cleaned = -0.000281388 Jy ! Component: 550 - total flux cleaned = -0.000301474 Jy ! Component: 600 - total flux cleaned = -0.000341269 Jy ! Component: 650 - total flux cleaned = -0.000400206 Jy ! Component: 700 - total flux cleaned = -0.000477247 Jy ! Component: 750 - total flux cleaned = -0.000400728 Jy ! Component: 800 - total flux cleaned = -0.000457866 Jy ! Component: 850 - total flux cleaned = -0.000457903 Jy ! Component: 900 - total flux cleaned = -0.000513128 Jy ! Component: 950 - total flux cleaned = -0.000440011 Jy ! Component: 1000 - total flux cleaned = -0.000439844 Jy ! Component: 1050 - total flux cleaned = -0.000421944 Jy ! Component: 1100 - total flux cleaned = -0.000333561 Jy ! Component: 1150 - total flux cleaned = -0.000368779 Jy ! Component: 1200 - total flux cleaned = -0.000299355 Jy ! Component: 1250 - total flux cleaned = -0.000282379 Jy ! Component: 1300 - total flux cleaned = -0.000333517 Jy ! Component: 1350 - total flux cleaned = -0.000316452 Jy ! Component: 1400 - total flux cleaned = -0.000349639 Jy ! Component: 1450 - total flux cleaned = -0.00033292 Jy ! Component: 1500 - total flux cleaned = -0.000349367 Jy ! Component: 1550 - total flux cleaned = -0.000365769 Jy ! Component: 1600 - total flux cleaned = -0.000382181 Jy ! Component: 1650 - total flux cleaned = -0.000381935 Jy ! Component: 1700 - total flux cleaned = -0.000413775 Jy ! Component: 1750 - total flux cleaned = -0.000461269 Jy ! Component: 1800 - total flux cleaned = -0.000508208 Jy ! Component: 1850 - total flux cleaned = -0.000523777 Jy ! Component: 1900 - total flux cleaned = -0.000616503 Jy ! Component: 1950 - total flux cleaned = -0.000693134 Jy ! Component: 2000 - total flux cleaned = -0.000723397 Jy ! Component: 2050 - total flux cleaned = -0.000798694 Jy ! Component: 2100 - total flux cleaned = -0.000858473 Jy ! Component: 2150 - total flux cleaned = -0.000873438 Jy ! Component: 2200 - total flux cleaned = -0.000917764 Jy ! Component: 2250 - total flux cleaned = -0.000917948 Jy ! Component: 2300 - total flux cleaned = -0.0010051 Jy ! Component: 2350 - total flux cleaned = -0.00100513 Jy ! Component: 2400 - total flux cleaned = -0.00107686 Jy ! Component: 2450 - total flux cleaned = -0.0011196 Jy ! Component: 2500 - total flux cleaned = -0.00113376 Jy ! Component: 2550 - total flux cleaned = -0.0011757 Jy ! Component: 2600 - total flux cleaned = -0.00121749 Jy ! Component: 2650 - total flux cleaned = -0.00123137 Jy ! Component: 2700 - total flux cleaned = -0.00119017 Jy ! Component: 2750 - total flux cleaned = -0.00123118 Jy ! Component: 2800 - total flux cleaned = -0.00125828 Jy ! Component: 2850 - total flux cleaned = -0.00127185 Jy ! Component: 2900 - total flux cleaned = -0.00124498 Jy ! Component: 2950 - total flux cleaned = -0.00121835 Jy ! Component: 3000 - total flux cleaned = -0.00123148 Jy ! Component: 3050 - total flux cleaned = -0.00120506 Jy ! Component: 3100 - total flux cleaned = -0.0011787 Jy ! Component: 3150 - total flux cleaned = -0.00117871 Jy ! Component: 3200 - total flux cleaned = -0.00106217 Jy ! Component: 3250 - total flux cleaned = -0.00106224 Jy ! Component: 3300 - total flux cleaned = -0.00106235 Jy ! Component: 3350 - total flux cleaned = -0.00107517 Jy ! Component: 3400 - total flux cleaned = -0.00103715 Jy ! Component: 3450 - total flux cleaned = -0.00101181 Jy ! Component: 3500 - total flux cleaned = -0.000999189 Jy ! Component: 3550 - total flux cleaned = -0.000936791 Jy ! Component: 3600 - total flux cleaned = -0.000912022 Jy ! Component: 3650 - total flux cleaned = -0.000862525 Jy ! Component: 3700 - total flux cleaned = -0.000825846 Jy ! Component: 3750 - total flux cleaned = -0.000862593 Jy ! Component: 3800 - total flux cleaned = -0.000813857 Jy ! Component: 3850 - total flux cleaned = -0.000825985 Jy ! Component: 3900 - total flux cleaned = -0.000826039 Jy ! Component: 3950 - total flux cleaned = -0.00077805 Jy ! Component: 4000 - total flux cleaned = -0.000813847 Jy ! Component: 4050 - total flux cleaned = -0.000790083 Jy ! Total flux subtracted in 4096 components = -0.000672103 Jy ! Clean residual min=-0.000811 max=0.000678 Jy/beam ! Clean residual mean=-0.000002 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.324501 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 451 components and 0.324501 Jy ![Exited script file: muppet] wmap "J1506+8319_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.909 x 4.28 at 53.39 degrees (North through East) ! Clean map min=-0.0010658 max=0.26233 Jy/beam ! Writing clean map to FITS file: J1506+8319_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.262326 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000212409 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.242914 0.242914 0.485828 0.971657 1.94331 3.88663 7.77325 15.5465 31.093 62.186 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.262 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.909 x 4.28 at 53.39 degrees (North through East) ! Clean map min=-0.0010658 max=0.26233 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1506+8319_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:51:53 2019