! Started logfile: J1506+3730_X_2017_08_12_pus_uvs.log on Fri May 10 15:25:41 2019 obs J1506+3730_X_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1506+3730_X_2017_08_12_pus_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.834483 visibilities/baseline/integration-bin. ! Found source: J1506+3730 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1049 lines of history. ! ! Reading 13068 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1506+3730_X_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.489837Jy sigma=0.003972 ! Fit after self-cal, rms=0.461483Jy sigma=0.003782 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.7544 mas, bmaj=1.33 mas, bpa=-1.217 degrees ! Estimated noise=1204 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.413639 Jy ! Component: 100 - total flux cleaned = 0.525499 Jy ! Total flux subtracted in 100 components = 0.525499 Jy ! Clean residual min=-0.019419 max=0.047148 Jy/beam ! Clean residual mean=-0.000091 rms=0.005738 Jy/beam ! Combined flux in latest and established models = 0.525499 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.525499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.184267Jy sigma=0.001151 ! Fit after self-cal, rms=0.184133Jy sigma=0.001150 ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.052695 Jy ! Component: 100 - total flux cleaned = 0.0833602 Jy ! Total flux subtracted in 100 components = 0.0833602 Jy ! Clean residual min=-0.016933 max=0.028488 Jy/beam ! Clean residual mean=-0.000058 rms=0.004396 Jy/beam ! Combined flux in latest and established models = 0.608859 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 17 components and 0.608859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.158626Jy sigma=0.000958 ! Fit after self-cal, rms=0.158507Jy sigma=0.000957 ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Added new window around map position (-1.2, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269042 Jy ! Component: 100 - total flux cleaned = 0.0440301 Jy ! Total flux subtracted in 100 components = 0.0440301 Jy ! Clean residual min=-0.015998 max=0.014631 Jy/beam ! Clean residual mean=-0.000035 rms=0.003985 Jy/beam ! Combined flux in latest and established models = 0.652889 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.652889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.150393Jy sigma=0.000910 ! Fit after self-cal, rms=0.150159Jy sigma=0.000907 ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.9159 mas, bmaj=1.613 mas, bpa=0.7757 degrees ! Estimated noise=785.921 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171614 Jy ! Component: 100 - total flux cleaned = 0.0278032 Jy ! Component: 150 - total flux cleaned = 0.0348933 Jy ! Component: 200 - total flux cleaned = 0.0397688 Jy ! Total flux subtracted in 200 components = 0.0397688 Jy ! Clean residual min=-0.017326 max=0.015195 Jy/beam ! Clean residual mean=0.000038 rms=0.004620 Jy/beam ! Combined flux in latest and established models = 0.692658 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 57 components and 0.692658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.146034Jy sigma=0.000898 ! Fit after self-cal, rms=0.145913Jy sigma=0.000897 ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.77 HN 1.07 KP 1.06 ! LA 1.00 MK 1.00 NL 0.98 OV 1.02 ! PT 1.05 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.78 HN 1.01 KP 1.09 ! LA 1.00 MK 0.99 NL 0.98 OV 1.01 ! PT 1.07 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.76 HN 1.00 KP 1.03 ! LA 1.02 MK 1.01 NL 0.99 OV 1.02 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.74 HN 1.05 KP 1.04 ! LA 1.02 MK 1.01 NL 0.99 OV 1.02 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.73 HN 1.00 KP 1.03 ! LA 1.02 MK 1.02 NL 1.00 OV 1.02 ! PT 1.04 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.75 HN 1.04 KP 1.05 ! LA 1.01 MK 1.00 NL 1.00 OV 1.03 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.76 HN 1.02 KP 1.05 ! LA 1.03 MK 1.01 NL 1.01 OV 1.00 ! PT 1.05 SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.80 HN 1.01 KP 1.06 ! LA 1.01 MK 1.01 NL 0.99 OV 1.01 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.76 HN 1.04 KP 1.06 ! LA 1.01 MK 0.97 NL 0.99 OV 1.01 ! PT 1.07 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.75 HN 1.06 KP 1.03 ! LA 1.05 MK 1.01 NL 1.00 OV 1.02 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.75 HN 1.04 KP 1.04 ! LA 1.04 MK 0.99 NL 1.00 OV 1.03 ! PT 1.06 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.77 HN 1.02 KP 1.04 ! LA 1.01 MK 1.04 NL 0.97 OV 1.04 ! PT 1.06 SC 1.03 ! ! ! Fit before self-cal, rms=0.145913Jy sigma=0.000897 ! Fit after self-cal, rms=0.107906Jy sigma=0.000775 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.9223 mas, bmaj=1.619 mas, bpa=0.57 degrees ! Estimated noise=785.809 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000345656 Jy ! Component: 100 - total flux cleaned = 6.58469e-05 Jy ! Component: 150 - total flux cleaned = 0.000294685 Jy ! Component: 200 - total flux cleaned = 0.000359597 Jy ! Total flux subtracted in 200 components = 0.000359597 Jy ! Clean residual min=-0.011067 max=0.011954 Jy/beam ! Clean residual mean=-0.000060 rms=0.003202 Jy/beam ! Combined flux in latest and established models = 0.693017 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 65 components and 0.693018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107739Jy sigma=0.000774 ! Fit after self-cal, rms=0.107629Jy sigma=0.000773 ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107629Jy sigma=0.000773 ! Fit after self-cal, rms=0.091172Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.9218 mas, bmaj=1.619 mas, bpa=0.5398 degrees ! Estimated noise=785.569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411246 Jy ! Component: 100 - total flux cleaned = -2.31898e-05 Jy ! Component: 150 - total flux cleaned = -0.000423416 Jy ! Component: 200 - total flux cleaned = -0.000470932 Jy ! Total flux subtracted in 200 components = -0.000470932 Jy ! Clean residual min=-0.004264 max=0.005694 Jy/beam ! Clean residual mean=0.000041 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.692547 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 69 components and 0.692547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091073Jy sigma=0.000655 ! Fit after self-cal, rms=0.091090Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.6, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00577457 Jy ! Component: 100 - total flux cleaned = 0.00938884 Jy ! Component: 150 - total flux cleaned = 0.0119163 Jy ! Component: 200 - total flux cleaned = 0.013168 Jy ! Total flux subtracted in 200 components = 0.013168 Jy ! Clean residual min=-0.003673 max=0.004489 Jy/beam ! Clean residual mean=0.000061 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.705715 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 98 components and 0.705715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090640Jy sigma=0.000651 ! Fit after self-cal, rms=0.090613Jy sigma=0.000651 ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Added new window around map position (-8.6, -7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0046514 Jy ! Component: 100 - total flux cleaned = 0.00735884 Jy ! Component: 150 - total flux cleaned = 0.00884967 Jy ! Component: 200 - total flux cleaned = 0.00974628 Jy ! Total flux subtracted in 200 components = 0.00974628 Jy ! Clean residual min=-0.003264 max=0.003200 Jy/beam ! Clean residual mean=0.000065 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.715461 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 120 components and 0.715461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090320Jy sigma=0.000649 ! Fit after self-cal, rms=0.090295Jy sigma=0.000648 ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090295Jy sigma=0.000648 ! Fit after self-cal, rms=0.090100Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.9216 mas, bmaj=1.619 mas, bpa=0.4524 degrees ! Estimated noise=784.728 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217636 Jy ! Component: 100 - total flux cleaned = 0.00309857 Jy ! Component: 150 - total flux cleaned = 0.00383298 Jy ! Component: 200 - total flux cleaned = 0.00424663 Jy ! Total flux subtracted in 200 components = 0.00424663 Jy ! Clean residual min=-0.002998 max=0.003004 Jy/beam ! Clean residual mean=0.000060 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.719708 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 129 components and 0.719708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089990Jy sigma=0.000647 ! Fit after self-cal, rms=0.089979Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, 14.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227172 Jy ! Component: 100 - total flux cleaned = 0.00311364 Jy ! Component: 150 - total flux cleaned = 0.00379525 Jy ! Component: 200 - total flux cleaned = 0.00420721 Jy ! Total flux subtracted in 200 components = 0.00420721 Jy ! Clean residual min=-0.002779 max=0.002718 Jy/beam ! Clean residual mean=0.000056 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.723915 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 150 components and 0.723915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089884Jy sigma=0.000646 ! Fit after self-cal, rms=0.089878Jy sigma=0.000646 ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089878Jy sigma=0.000646 ! Fit after self-cal, rms=0.089847Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=2.211 mas, bmaj=2.642 mas, bpa=3.863 degrees ! Estimated noise=1012.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204432 Jy ! Component: 100 - total flux cleaned = 0.00291701 Jy ! Component: 150 - total flux cleaned = 0.00347365 Jy ! Component: 200 - total flux cleaned = 0.00397971 Jy ! Total flux subtracted in 200 components = 0.00397971 Jy ! Clean residual min=-0.002741 max=0.002535 Jy/beam ! Clean residual mean=0.000121 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.727894 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 165 components and 0.727894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089832Jy sigma=0.000646 ! Fit after self-cal, rms=0.089822Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00073163 Jy ! Component: 100 - total flux cleaned = 0.00122882 Jy ! Component: 150 - total flux cleaned = 0.00162647 Jy ! Component: 200 - total flux cleaned = 0.00185386 Jy ! Total flux subtracted in 200 components = 0.00185386 Jy ! Clean residual min=-0.002690 max=0.002363 Jy/beam ! Clean residual mean=0.000122 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.729748 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 178 components and 0.729748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089822Jy sigma=0.000646 ! Fit after self-cal, rms=0.089820Jy sigma=0.000646 ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.9217 mas, bmaj=1.619 mas, bpa=0.4394 degrees ! Estimated noise=784.867 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9217 x 1.619 at 0.4394 degrees (North through East) ! Clean map min=-0.0022926 max=0.54323 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089820Jy sigma=0.000646 ! Fit after self-cal, rms=0.085167Jy sigma=0.000602 ! Inverting map and beam ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.9216 mas, bmaj=1.619 mas, bpa=0.3829 degrees ! Estimated noise=784.534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000516038 Jy ! Component: 100 - total flux cleaned = -0.000356773 Jy ! Component: 150 - total flux cleaned = -0.000312453 Jy ! Component: 200 - total flux cleaned = -0.000311501 Jy ! Total flux subtracted in 200 components = -0.000311501 Jy ! Clean residual min=-0.002480 max=0.002489 Jy/beam ! Clean residual mean=0.000051 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.729437 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 193 components and 0.729437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085113Jy sigma=0.000602 ! Fit after self-cal, rms=0.085108Jy sigma=0.000602 ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.0401e-06 Jy ! Component: 100 - total flux cleaned = -4.55283e-05 Jy ! Component: 150 - total flux cleaned = -0.000116814 Jy ! Component: 200 - total flux cleaned = -0.000219504 Jy ! Total flux subtracted in 200 components = -0.000219504 Jy ! Clean residual min=-0.002402 max=0.002515 Jy/beam ! Clean residual mean=0.000051 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.729217 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 203 components and 0.729217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085077Jy sigma=0.000601 ! Fit after self-cal, rms=0.085072Jy sigma=0.000601 ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Added new window around map position (-2.6, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105057 Jy ! Component: 100 - total flux cleaned = 0.00122317 Jy ! Component: 150 - total flux cleaned = 0.00127403 Jy ! Component: 200 - total flux cleaned = 0.00131982 Jy ! Total flux subtracted in 200 components = 0.00131982 Jy ! Clean residual min=-0.002038 max=0.002098 Jy/beam ! Clean residual mean=0.000053 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.730537 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 217 components and 0.730537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084981Jy sigma=0.000601 ! Fit after self-cal, rms=0.084972Jy sigma=0.000601 ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084972Jy sigma=0.000601 ! Fit after self-cal, rms=0.084963Jy sigma=0.000601 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.7592 mas, bmaj=1.335 mas, bpa=-1.564 degrees ! Estimated noise=1208.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.414265 Jy ! Component: 100 - total flux cleaned = 0.529456 Jy ! Component: 150 - total flux cleaned = 0.58316 Jy ! Component: 200 - total flux cleaned = 0.613617 Jy ! Total flux subtracted in 200 components = 0.613617 Jy ! Clean residual min=-0.007607 max=0.015839 Jy/beam ! Clean residual mean=-0.000026 rms=0.002093 Jy/beam ! Combined flux in latest and established models = 0.613617 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.613617 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.9217 mas, bmaj=1.618 mas, bpa=0.3792 degrees ! Estimated noise=784.688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265359 Jy ! Component: 100 - total flux cleaned = 0.0427398 Jy ! Component: 150 - total flux cleaned = 0.0536393 Jy ! Component: 200 - total flux cleaned = 0.0619413 Jy ! Total flux subtracted in 200 components = 0.0619413 Jy ! Clean residual min=-0.003788 max=0.005136 Jy/beam ! Clean residual mean=0.000011 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.675559 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 51 components and 0.675559 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Added new window around map position (-0.4, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00683854 Jy ! Component: 100 - total flux cleaned = 0.012507 Jy ! Component: 150 - total flux cleaned = 0.0173092 Jy ! Component: 200 - total flux cleaned = 0.0215029 Jy ! Total flux subtracted in 200 components = 0.0215029 Jy ! Clean residual min=-0.003005 max=0.003070 Jy/beam ! Clean residual mean=0.000031 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.697061 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 83 components and 0.697062 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=2.212 mas, bmaj=2.642 mas, bpa=3.817 degrees ! Estimated noise=1012.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00653876 Jy ! Component: 100 - total flux cleaned = 0.0114103 Jy ! Component: 150 - total flux cleaned = 0.0152134 Jy ! Component: 200 - total flux cleaned = 0.0182457 Jy ! Total flux subtracted in 200 components = 0.0182457 Jy ! Clean residual min=-0.002998 max=0.002419 Jy/beam ! Clean residual mean=0.000099 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.715307 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246186 Jy ! Component: 100 - total flux cleaned = 0.0044887 Jy ! Component: 150 - total flux cleaned = 0.00618163 Jy ! Component: 200 - total flux cleaned = 0.00762217 Jy ! Total flux subtracted in 200 components = 0.00762217 Jy ! Clean residual min=-0.002433 max=0.002212 Jy/beam ! Clean residual mean=0.000106 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.722929 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 155 components and 0.72293 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.9217 mas, bmaj=1.618 mas, bpa=0.3792 degrees ! Estimated noise=784.688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000780528 Jy ! Component: 100 - total flux cleaned = 0.00158004 Jy ! Component: 150 - total flux cleaned = 0.00206692 Jy ! Component: 200 - total flux cleaned = 0.00235269 Jy ! Total flux subtracted in 200 components = 0.00235269 Jy ! Clean residual min=-0.002224 max=0.002244 Jy/beam ! Clean residual mean=0.000046 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.725282 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 179 components and 0.725282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085084Jy sigma=0.000602 ! Fit after self-cal, rms=0.085052Jy sigma=0.000601 wmodel J1506+3730_X_2017_08_12_pus_map.mod ! Writing 179 model components to file: J1506+3730_X_2017_08_12_pus_map.mod wobs J1506+3730_X_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1506+3730_X_2017_08_12_pus_uvs.fits wwins J1506+3730_X_2017_08_12_pus_map.win ! wwins: Wrote 7 windows to J1506+3730_X_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120017 Jy ! Component: 100 - total flux cleaned = -0.000379355 Jy ! Component: 150 - total flux cleaned = -0.000449445 Jy ! Component: 200 - total flux cleaned = -0.000515989 Jy ! Component: 250 - total flux cleaned = -0.000482756 Jy ! Component: 300 - total flux cleaned = -0.000576163 Jy ! Component: 350 - total flux cleaned = -0.000636354 Jy ! Component: 400 - total flux cleaned = -0.00069579 Jy ! Component: 450 - total flux cleaned = -0.000695983 Jy ! Component: 500 - total flux cleaned = -0.000667659 Jy ! Component: 550 - total flux cleaned = -0.000695695 Jy ! Component: 600 - total flux cleaned = -0.000556654 Jy ! Component: 650 - total flux cleaned = -0.000529233 Jy ! Component: 700 - total flux cleaned = -0.000475582 Jy ! Component: 750 - total flux cleaned = -0.000449399 Jy ! Component: 800 - total flux cleaned = -0.000423577 Jy ! Component: 850 - total flux cleaned = -0.000398512 Jy ! Component: 900 - total flux cleaned = -0.000398738 Jy ! Component: 950 - total flux cleaned = -0.000323862 Jy ! Component: 1000 - total flux cleaned = -0.000176023 Jy ! Component: 1050 - total flux cleaned = -0.000127464 Jy ! Component: 1100 - total flux cleaned = -0.000103471 Jy ! Component: 1150 - total flux cleaned = 3.94332e-05 Jy ! Component: 1200 - total flux cleaned = 0.000133671 Jy ! Component: 1250 - total flux cleaned = 0.000249678 Jy ! Component: 1300 - total flux cleaned = 0.000318603 Jy ! Component: 1350 - total flux cleaned = 0.000409581 Jy ! Component: 1400 - total flux cleaned = 0.000454165 Jy ! Component: 1450 - total flux cleaned = 0.000542997 Jy ! Component: 1500 - total flux cleaned = 0.000674896 Jy ! Component: 1550 - total flux cleaned = 0.000783321 Jy ! Component: 1600 - total flux cleaned = 0.000783588 Jy ! Component: 1650 - total flux cleaned = 0.000932601 Jy ! Component: 1700 - total flux cleaned = 0.00107958 Jy ! Component: 1750 - total flux cleaned = 0.00114191 Jy ! Component: 1800 - total flux cleaned = 0.00118345 Jy ! Component: 1850 - total flux cleaned = 0.00136721 Jy ! Component: 1900 - total flux cleaned = 0.00148876 Jy ! Component: 1950 - total flux cleaned = 0.00154853 Jy ! Component: 2000 - total flux cleaned = 0.00162793 Jy ! Total flux subtracted in 2048 components = 0.00170683 Jy ! Clean residual min=-0.001254 max=0.001214 Jy/beam ! Clean residual mean=0.000023 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.726989 Jy keep ! Adding 161 model components to the UV plane model. ! The established model now contains 340 components and 0.726989 Jy ![Exited script file: muppet] wmap "J1506+3730_X_2017_08_12_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9217 x 1.618 at 0.3792 degrees (North through East) ! Clean map min=-0.0016964 max=0.54385 Jy/beam ! Writing clean map to FITS file: J1506+3730_X_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.543845 invert ! Inverting map ! Your choice of large map pixels excluded 0.0689% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000369265 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.203697 0.203697 0.407394 0.814787 1.62957 3.25915 6.5183 13.0366 26.0732 52.1464 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.543 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9217 x 1.618 at 0.3792 degrees (North through East) ! Clean map min=-0.0016964 max=0.54385 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1506+3730_X_2017_08_12_pus_uvs.log closed on Fri May 10 15:25:43 2019