! Started logfile: J1506+3730_S_2017_08_05_pus_uvs.log on Thu May 9 19:32:14 2019 obs J1506+3730_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1506+3730_S_2017_08_05_pus_uva.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.641111 visibilities/baseline/integration-bin. ! Found source: J1506+3730 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 2308 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1506+3730_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.559540Jy sigma=0.005604 ! Fit after self-cal, rms=0.553363Jy sigma=0.005548 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.686 mas, bmaj=6.385 mas, bpa=-18.04 degrees ! Estimated noise=2084.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.343266 Jy ! Component: 100 - total flux cleaned = 0.451519 Jy ! Total flux subtracted in 100 components = 0.451519 Jy ! Clean residual min=-0.024454 max=0.047846 Jy/beam ! Clean residual mean=0.000234 rms=0.008527 Jy/beam ! Combined flux in latest and established models = 0.451519 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.451519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158017Jy sigma=0.001370 ! Fit after self-cal, rms=0.157976Jy sigma=0.001369 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=7.228 mas, bpa=-16.15 degrees ! Estimated noise=1734.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.069466 Jy ! Component: 100 - total flux cleaned = 0.106964 Jy ! Component: 150 - total flux cleaned = 0.128961 Jy ! Component: 200 - total flux cleaned = 0.142769 Jy ! Total flux subtracted in 200 components = 0.142769 Jy ! Clean residual min=-0.019801 max=0.034842 Jy/beam ! Clean residual mean=0.000135 rms=0.006003 Jy/beam ! Combined flux in latest and established models = 0.594288 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 49 components and 0.594288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118376Jy sigma=0.001033 ! Fit after self-cal, rms=0.118162Jy sigma=0.001029 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.91 HN 0.95 KP 1.04 ! LA 1.03 MK 0.99 NL 1.03 OV 1.04 ! PT 1.00 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.97 KP 0.98 ! LA 1.01 MK 0.95 NL 1.18 OV 1.05 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.96 KP 0.86 ! LA 0.79 MK 0.99 NL 1.41 OV 0.98 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.99 KP 1.00* ! LA 0.77 MK 1.53 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.118162Jy sigma=0.001029 ! Fit after self-cal, rms=0.090934Jy sigma=0.000823 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=7.223 mas, bpa=-16.12 degrees ! Estimated noise=1720 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00021169 Jy ! Component: 100 - total flux cleaned = 0.000346484 Jy ! Component: 150 - total flux cleaned = 0.000459997 Jy ! Component: 200 - total flux cleaned = 0.000362572 Jy ! Total flux subtracted in 200 components = 0.000362572 Jy ! Clean residual min=-0.014512 max=0.017412 Jy/beam ! Clean residual mean=0.000001 rms=0.004158 Jy/beam ! Combined flux in latest and established models = 0.59465 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 60 components and 0.59465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090549Jy sigma=0.000819 ! Fit after self-cal, rms=0.090524Jy sigma=0.000818 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090524Jy sigma=0.000818 ! Fit after self-cal, rms=0.080970Jy sigma=0.000755 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=7.269 mas, bpa=-15.98 degrees ! Estimated noise=1723.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00256428 Jy ! Component: 100 - total flux cleaned = -0.00322806 Jy ! Component: 150 - total flux cleaned = -0.00365724 Jy ! Component: 200 - total flux cleaned = -0.00403575 Jy ! Total flux subtracted in 200 components = -0.00403575 Jy ! Clean residual min=-0.012340 max=0.018518 Jy/beam ! Clean residual mean=-0.000002 rms=0.003474 Jy/beam ! Combined flux in latest and established models = 0.590614 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 62 components and 0.590614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080510Jy sigma=0.000751 ! Fit after self-cal, rms=0.080531Jy sigma=0.000751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19, -15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178621 Jy ! Component: 100 - total flux cleaned = 0.0232243 Jy ! Component: 150 - total flux cleaned = 0.0243797 Jy ! Component: 200 - total flux cleaned = 0.0248401 Jy ! Total flux subtracted in 200 components = 0.0248401 Jy ! Clean residual min=-0.009854 max=0.012747 Jy/beam ! Clean residual mean=-0.000014 rms=0.002591 Jy/beam ! Combined flux in latest and established models = 0.615454 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 85 components and 0.615455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076240Jy sigma=0.000705 ! Fit after self-cal, rms=0.076047Jy sigma=0.000703 ! Inverting map ! Added new window around map position (-8, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00813284 Jy ! Component: 100 - total flux cleaned = 0.00866026 Jy ! Component: 150 - total flux cleaned = 0.00910203 Jy ! Component: 200 - total flux cleaned = 0.00891843 Jy ! Total flux subtracted in 200 components = 0.00891843 Jy ! Clean residual min=-0.008326 max=0.009190 Jy/beam ! Clean residual mean=-0.000028 rms=0.002209 Jy/beam ! Combined flux in latest and established models = 0.624373 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 100 components and 0.624373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073963Jy sigma=0.000682 ! Fit after self-cal, rms=0.073729Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073729Jy sigma=0.000680 ! Fit after self-cal, rms=0.073164Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=7.278 mas, bpa=-16 degrees ! Estimated noise=1719.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457483 Jy ! Component: 100 - total flux cleaned = 0.00515223 Jy ! Component: 150 - total flux cleaned = 0.00531249 Jy ! Component: 200 - total flux cleaned = 0.00502979 Jy ! Total flux subtracted in 200 components = 0.00502979 Jy ! Clean residual min=-0.007807 max=0.008199 Jy/beam ! Clean residual mean=-0.000028 rms=0.001966 Jy/beam ! Combined flux in latest and established models = 0.629403 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 111 components and 0.629403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072264Jy sigma=0.000667 ! Fit after self-cal, rms=0.072189Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154734 Jy ! Component: 100 - total flux cleaned = 0.0011583 Jy ! Component: 150 - total flux cleaned = 0.00104087 Jy ! Component: 200 - total flux cleaned = 0.000710914 Jy ! Total flux subtracted in 200 components = 0.000710914 Jy ! Clean residual min=-0.007370 max=0.008227 Jy/beam ! Clean residual mean=-0.000028 rms=0.001874 Jy/beam ! Combined flux in latest and established models = 0.630114 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 126 components and 0.630114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071750Jy sigma=0.000662 ! Fit after self-cal, rms=0.071733Jy sigma=0.000662 ! Inverting map ! Added new window around map position (-43.5, -42). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00683808 Jy ! Component: 100 - total flux cleaned = 0.0090225 Jy ! Component: 150 - total flux cleaned = 0.0110202 Jy ! Component: 200 - total flux cleaned = 0.0122927 Jy ! Total flux subtracted in 200 components = 0.0122927 Jy ! Clean residual min=-0.006557 max=0.006770 Jy/beam ! Clean residual mean=-0.000009 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 0.642406 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 149 components and 0.642406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070906Jy sigma=0.000652 ! Fit after self-cal, rms=0.070816Jy sigma=0.000652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070816Jy sigma=0.000652 ! Fit after self-cal, rms=0.070734Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.973 mas, bmaj=10.49 mas, bpa=-18.52 degrees ! Estimated noise=2209.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00466132 Jy ! Component: 100 - total flux cleaned = 0.00605859 Jy ! Component: 150 - total flux cleaned = 0.00661624 Jy ! Component: 200 - total flux cleaned = 0.0069863 Jy ! Total flux subtracted in 200 components = 0.0069863 Jy ! Clean residual min=-0.007153 max=0.006766 Jy/beam ! Clean residual mean=-0.000013 rms=0.002017 Jy/beam ! Combined flux in latest and established models = 0.649393 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 170 components and 0.649393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070461Jy sigma=0.000648 ! Fit after self-cal, rms=0.070391Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178517 Jy ! Component: 100 - total flux cleaned = 0.00256016 Jy ! Component: 150 - total flux cleaned = 0.0024659 Jy ! Component: 200 - total flux cleaned = 0.00246683 Jy ! Total flux subtracted in 200 components = 0.00246683 Jy ! Clean residual min=-0.006840 max=0.006330 Jy/beam ! Clean residual mean=-0.000005 rms=0.001875 Jy/beam ! Combined flux in latest and established models = 0.65186 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 188 components and 0.65186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070353Jy sigma=0.000647 ! Fit after self-cal, rms=0.070331Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=7.289 mas, bpa=-16 degrees ! Estimated noise=1721.48 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.129 x 7.289 at -16 degrees (North through East) ! Clean map min=-0.011856 max=0.44615 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=6.429 mas, bpa=-17.97 degrees ! Estimated noise=2076.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.340244 Jy ! Component: 100 - total flux cleaned = 0.446896 Jy ! Component: 150 - total flux cleaned = 0.504371 Jy ! Component: 200 - total flux cleaned = 0.539652 Jy ! Total flux subtracted in 200 components = 0.539652 Jy ! Clean residual min=-0.013404 max=0.018395 Jy/beam ! Clean residual mean=0.000065 rms=0.003979 Jy/beam ! Combined flux in latest and established models = 0.539653 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.539653 Jy ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=7.289 mas, bpa=-16 degrees ! Estimated noise=1721.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0277202 Jy ! Component: 100 - total flux cleaned = 0.0464629 Jy ! Component: 150 - total flux cleaned = 0.0602981 Jy ! Component: 200 - total flux cleaned = 0.070775 Jy ! Total flux subtracted in 200 components = 0.070775 Jy ! Clean residual min=-0.008870 max=0.010036 Jy/beam ! Clean residual mean=0.000008 rms=0.002455 Jy/beam ! Combined flux in latest and established models = 0.610428 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 71 components and 0.610427 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.973 mas, bmaj=10.49 mas, bpa=-18.52 degrees ! Estimated noise=2209.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135183 Jy ! Component: 100 - total flux cleaned = 0.0224491 Jy ! Component: 150 - total flux cleaned = 0.026536 Jy ! Component: 200 - total flux cleaned = 0.0299278 Jy ! Total flux subtracted in 200 components = 0.0299278 Jy ! Clean residual min=-0.008094 max=0.008018 Jy/beam ! Clean residual mean=-0.000001 rms=0.002470 Jy/beam ! Combined flux in latest and established models = 0.640355 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263922 Jy ! Component: 100 - total flux cleaned = 0.0048895 Jy ! Component: 150 - total flux cleaned = 0.00625156 Jy ! Component: 200 - total flux cleaned = 0.0067957 Jy ! Total flux subtracted in 200 components = 0.0067957 Jy ! Clean residual min=-0.007441 max=0.006883 Jy/beam ! Clean residual mean=-0.000001 rms=0.002079 Jy/beam ! Combined flux in latest and established models = 0.647151 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 125 components and 0.647151 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=7.289 mas, bpa=-16 degrees ! Estimated noise=1721.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000515767 Jy ! Component: 100 - total flux cleaned = 0.000555328 Jy ! Component: 150 - total flux cleaned = 0.00145903 Jy ! Component: 200 - total flux cleaned = 0.00257673 Jy ! Total flux subtracted in 200 components = 0.00257673 Jy ! Clean residual min=-0.006078 max=0.006081 Jy/beam ! Clean residual mean=0.000000 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 0.649728 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 151 components and 0.649728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070460Jy sigma=0.000648 ! Fit after self-cal, rms=0.070248Jy sigma=0.000646 wmodel J1506+3730_S_2017_08_05_pus_map.mod ! Writing 151 model components to file: J1506+3730_S_2017_08_05_pus_map.mod wobs J1506+3730_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1506+3730_S_2017_08_05_pus_uvs.fits wwins J1506+3730_S_2017_08_05_pus_map.win ! wwins: Wrote 4 windows to J1506+3730_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000113828 Jy ! Component: 100 - total flux cleaned = 0.000369107 Jy ! Component: 150 - total flux cleaned = 0.00109846 Jy ! Component: 200 - total flux cleaned = 0.00152896 Jy ! Component: 250 - total flux cleaned = 0.00160773 Jy ! Component: 300 - total flux cleaned = 0.00176392 Jy ! Component: 350 - total flux cleaned = 0.00168635 Jy ! Component: 400 - total flux cleaned = 0.00168488 Jy ! Component: 450 - total flux cleaned = 0.00168465 Jy ! Component: 500 - total flux cleaned = 0.00154737 Jy ! Component: 550 - total flux cleaned = 0.00141559 Jy ! Component: 600 - total flux cleaned = 0.00141781 Jy ! Component: 650 - total flux cleaned = 0.00135445 Jy ! Component: 700 - total flux cleaned = 0.00147474 Jy ! Component: 750 - total flux cleaned = 0.00141681 Jy ! Component: 800 - total flux cleaned = 0.00159184 Jy ! Component: 850 - total flux cleaned = 0.00159175 Jy ! Component: 900 - total flux cleaned = 0.00142696 Jy ! Component: 950 - total flux cleaned = 0.00148081 Jy ! Component: 1000 - total flux cleaned = 0.00137522 Jy ! Component: 1050 - total flux cleaned = 0.00127286 Jy ! Component: 1100 - total flux cleaned = 0.00132436 Jy ! Component: 1150 - total flux cleaned = 0.00127439 Jy ! Component: 1200 - total flux cleaned = 0.00151537 Jy ! Component: 1250 - total flux cleaned = 0.00160882 Jy ! Component: 1300 - total flux cleaned = 0.00174901 Jy ! Component: 1350 - total flux cleaned = 0.00197635 Jy ! Component: 1400 - total flux cleaned = 0.00202156 Jy ! Component: 1450 - total flux cleaned = 0.00233009 Jy ! Component: 1500 - total flux cleaned = 0.00250225 Jy ! Component: 1550 - total flux cleaned = 0.00258702 Jy ! Component: 1600 - total flux cleaned = 0.00283755 Jy ! Component: 1650 - total flux cleaned = 0.00300188 Jy ! Component: 1700 - total flux cleaned = 0.00324319 Jy ! Component: 1750 - total flux cleaned = 0.00344105 Jy ! Component: 1800 - total flux cleaned = 0.00363572 Jy ! Component: 1850 - total flux cleaned = 0.00378943 Jy ! Component: 1900 - total flux cleaned = 0.00405382 Jy ! Component: 1950 - total flux cleaned = 0.00416592 Jy ! Component: 2000 - total flux cleaned = 0.00438649 Jy ! Component: 2050 - total flux cleaned = 0.00453177 Jy ! Component: 2100 - total flux cleaned = 0.00474674 Jy ! Component: 2150 - total flux cleaned = 0.00488745 Jy ! Component: 2200 - total flux cleaned = 0.00488706 Jy ! Component: 2250 - total flux cleaned = 0.00495589 Jy ! Component: 2300 - total flux cleaned = 0.004922 Jy ! Component: 2350 - total flux cleaned = 0.004922 Jy ! Component: 2400 - total flux cleaned = 0.00482295 Jy ! Component: 2450 - total flux cleaned = 0.00485655 Jy ! Component: 2500 - total flux cleaned = 0.00479228 Jy ! Component: 2550 - total flux cleaned = 0.00479212 Jy ! Component: 2600 - total flux cleaned = 0.00469733 Jy ! Component: 2650 - total flux cleaned = 0.00466608 Jy ! Component: 2700 - total flux cleaned = 0.00460387 Jy ! Component: 2750 - total flux cleaned = 0.00451119 Jy ! Component: 2800 - total flux cleaned = 0.00429773 Jy ! Component: 2850 - total flux cleaned = 0.00429783 Jy ! Component: 2900 - total flux cleaned = 0.00414888 Jy ! Component: 2950 - total flux cleaned = 0.0041488 Jy ! Component: 3000 - total flux cleaned = 0.00403182 Jy ! Component: 3050 - total flux cleaned = 0.00394529 Jy ! Component: 3100 - total flux cleaned = 0.00383057 Jy ! Component: 3150 - total flux cleaned = 0.00371722 Jy ! Component: 3200 - total flux cleaned = 0.00357674 Jy ! Component: 3250 - total flux cleaned = 0.00357699 Jy ! Component: 3300 - total flux cleaned = 0.00343921 Jy ! Component: 3350 - total flux cleaned = 0.00343893 Jy ! Component: 3400 - total flux cleaned = 0.00333011 Jy ! Component: 3450 - total flux cleaned = 0.00322295 Jy ! Component: 3500 - total flux cleaned = 0.0031962 Jy ! Component: 3550 - total flux cleaned = 0.00311711 Jy ! Component: 3600 - total flux cleaned = 0.00303888 Jy ! Component: 3650 - total flux cleaned = 0.00301266 Jy ! Component: 3700 - total flux cleaned = 0.00288483 Jy ! Component: 3750 - total flux cleaned = 0.00280907 Jy ! Component: 3800 - total flux cleaned = 0.00278433 Jy ! Component: 3850 - total flux cleaned = 0.00278435 Jy ! Component: 3900 - total flux cleaned = 0.00263651 Jy ! Component: 3950 - total flux cleaned = 0.00268558 Jy ! Component: 4000 - total flux cleaned = 0.00261263 Jy ! Component: 4050 - total flux cleaned = 0.00261268 Jy ! Total flux subtracted in 4096 components = 0.00256484 Jy ! Clean residual min=-0.001535 max=0.001402 Jy/beam ! Clean residual mean=-0.000000 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.652293 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 429 components and 0.652293 Jy ![Exited script file: muppet] wmap "J1506+3730_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.129 x 7.289 at -16 degrees (North through East) ! Clean map min=-0.0075432 max=0.44502 Jy/beam ! Writing clean map to FITS file: J1506+3730_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.445024 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000422681 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.284939 0.284939 0.569877 1.13975 2.27951 4.55902 9.11803 18.2361 36.4721 72.9443 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.445 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.129 x 7.289 at -16 degrees (North through East) ! Clean map min=-0.0075432 max=0.44502 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1506+3730_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:32:19 2019