! Started logfile: J1505+0326_S_2017_02_24_pus_uvs.log on Sat May 4 11:29:11 2019 obs J1505+0326_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1505+0326_S_2017_02_24_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.857407 visibilities/baseline/integration-bin. ! Found source: J1505+0326 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 3704 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1505+0326_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.628338Jy sigma=0.041462 ! Fit after self-cal, rms=0.625434Jy sigma=0.041453 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.978 mas, bmaj=8.016 mas, bpa=-7.754 degrees ! Estimated noise=1087.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.184017 Jy ! Component: 100 - total flux cleaned = 0.206532 Jy ! Total flux subtracted in 100 components = 0.206532 Jy ! Clean residual min=-0.083451 max=0.081070 Jy/beam ! Clean residual mean=-0.000038 rms=0.026362 Jy/beam ! Combined flux in latest and established models = 0.206532 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.206532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222985Jy sigma=0.008573 ! Fit after self-cal, rms=0.222961Jy sigma=0.008573 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.645 mas, bmaj=8.788 mas, bpa=-5.66 degrees ! Estimated noise=933.485 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153939 Jy ! Component: 100 - total flux cleaned = 0.00768858 Jy ! Component: 150 - total flux cleaned = 0.00192254 Jy ! Component: 200 - total flux cleaned = -0.00306537 Jy ! Total flux subtracted in 200 components = -0.00306537 Jy ! Clean residual min=-0.075012 max=0.072004 Jy/beam ! Clean residual mean=-0.000701 rms=0.021589 Jy/beam ! Combined flux in latest and established models = 0.203467 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 0.203467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199809Jy sigma=0.009169 ! Fit after self-cal, rms=0.199780Jy sigma=0.009169 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.81 HN 0.92 KP 0.75 ! LA 0.70 MK 0.91 NL 0.83 OV 0.77 ! PT 0.74 SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.76 HN 0.94 KP 0.70 ! LA 0.67 MK 0.88 NL 0.79 OV 0.80 ! PT 0.73 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.78 HN 0.88 KP 0.78 ! LA 0.76 MK 0.90 NL 0.89 OV 0.73 ! PT 0.71 SC 0.93 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.87 HN 0.83 KP 1.00* ! LA 36.15 MK 1.10 NL 1.00* OV 0.74 ! PT 0.74 SC 1.00* ! ! ! Fit before self-cal, rms=0.199780Jy sigma=0.009169 ! Fit after self-cal, rms=4.702029Jy sigma=0.000847 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.524 mas, bmaj=8.162 mas, bpa=-3.029 degrees ! Estimated noise=936.304 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111108 Jy ! Component: 100 - total flux cleaned = 0.0171723 Jy ! Component: 150 - total flux cleaned = 0.0202306 Jy ! Component: 200 - total flux cleaned = 0.02097 Jy ! Total flux subtracted in 200 components = 0.02097 Jy ! Clean residual min=-0.005615 max=0.005006 Jy/beam ! Clean residual mean=-0.000013 rms=0.001349 Jy/beam ! Combined flux in latest and established models = 0.224437 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 31 components and 0.224437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.700736Jy sigma=0.000833 ! Fit after self-cal, rms=4.700778Jy sigma=0.000821 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.700778Jy sigma=0.000821 ! Fit after self-cal, rms=5.142803Jy sigma=0.000794 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.488 mas, bmaj=8.074 mas, bpa=-3.091 degrees ! Estimated noise=952.068 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00694034 Jy ! Component: 100 - total flux cleaned = 0.0113272 Jy ! Component: 150 - total flux cleaned = 0.0142049 Jy ! Component: 200 - total flux cleaned = 0.0154023 Jy ! Total flux subtracted in 200 components = 0.0154023 Jy ! Clean residual min=-0.005113 max=0.003922 Jy/beam ! Clean residual mean=-0.000013 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.239839 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 47 components and 0.239839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.141542Jy sigma=0.000793 ! Fit after self-cal, rms=5.141561Jy sigma=0.000793 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000619957 Jy ! Component: 100 - total flux cleaned = 0.00113385 Jy ! Component: 150 - total flux cleaned = 0.00147518 Jy ! Component: 200 - total flux cleaned = 0.00168091 Jy ! Total flux subtracted in 200 components = 0.00168091 Jy ! Clean residual min=-0.005032 max=0.003981 Jy/beam ! Clean residual mean=-0.000013 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.24152 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 0.24152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.141421Jy sigma=0.000793 ! Fit after self-cal, rms=5.141423Jy sigma=0.000793 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.141423Jy sigma=0.000793 ! Fit after self-cal, rms=0.054939Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.481 mas, bmaj=8.048 mas, bpa=-3.09 degrees ! Estimated noise=950.676 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00087856 Jy ! Component: 100 - total flux cleaned = 0.00109809 Jy ! Component: 150 - total flux cleaned = 0.00132705 Jy ! Component: 200 - total flux cleaned = 0.0014061 Jy ! Total flux subtracted in 200 components = 0.0014061 Jy ! Clean residual min=-0.002334 max=0.002790 Jy/beam ! Clean residual mean=0.000002 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.242926 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 0.242926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054845Jy sigma=0.000672 ! Fit after self-cal, rms=0.054780Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-94, -99.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189069 Jy ! Component: 100 - total flux cleaned = 0.00210889 Jy ! Component: 150 - total flux cleaned = 0.00206239 Jy ! Component: 200 - total flux cleaned = 0.00214517 Jy ! Total flux subtracted in 200 components = 0.00214517 Jy ! Clean residual min=-0.002408 max=0.002577 Jy/beam ! Clean residual mean=0.000001 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.245071 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 90 components and 0.245071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054640Jy sigma=0.000670 ! Fit after self-cal, rms=0.054638Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054638Jy sigma=0.000670 ! Fit after self-cal, rms=0.054675Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.941 mas, bmaj=12.3 mas, bpa=3.597 degrees ! Estimated noise=1115.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146871 Jy ! Component: 100 - total flux cleaned = 0.00171353 Jy ! Component: 150 - total flux cleaned = 0.00183719 Jy ! Component: 200 - total flux cleaned = 0.00194362 Jy ! Total flux subtracted in 200 components = 0.00194362 Jy ! Clean residual min=-0.002623 max=0.002419 Jy/beam ! Clean residual mean=0.000002 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.247015 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 113 components and 0.247015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054658Jy sigma=0.000669 ! Fit after self-cal, rms=0.054651Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.01017e-05 Jy ! Component: 100 - total flux cleaned = 9.04555e-05 Jy ! Component: 150 - total flux cleaned = 0.00013005 Jy ! Component: 200 - total flux cleaned = 0.000148427 Jy ! Total flux subtracted in 200 components = 0.000148427 Jy ! Clean residual min=-0.002642 max=0.002386 Jy/beam ! Clean residual mean=0.000002 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.247163 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 125 components and 0.247163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054649Jy sigma=0.000669 ! Fit after self-cal, rms=0.054649Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=8.038 mas, bpa=-3.071 degrees ! Estimated noise=952.791 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.478 x 8.038 at -3.071 degrees (North through East) ! Clean map min=-0.0022948 max=0.26156 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=7.171 mas, bpa=-5.067 degrees ! Estimated noise=1196.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202571 Jy ! Component: 100 - total flux cleaned = 0.246751 Jy ! Component: 150 - total flux cleaned = 0.251767 Jy ! Component: 200 - total flux cleaned = 0.250227 Jy ! Total flux subtracted in 200 components = 0.250227 Jy ! Clean residual min=-0.003505 max=0.003944 Jy/beam ! Clean residual mean=0.000000 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.250227 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.250227 Jy ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=8.038 mas, bpa=-3.071 degrees ! Estimated noise=952.791 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000546084 Jy ! Component: 100 - total flux cleaned = -0.000787469 Jy ! Component: 150 - total flux cleaned = -0.00109513 Jy ! Component: 200 - total flux cleaned = -0.00127563 Jy ! Total flux subtracted in 200 components = -0.00127563 Jy ! Clean residual min=-0.002624 max=0.002772 Jy/beam ! Clean residual mean=0.000000 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.248951 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 30 components and 0.248951 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.941 mas, bmaj=12.3 mas, bpa=3.597 degrees ! Estimated noise=1115.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000327086 Jy ! Component: 100 - total flux cleaned = -0.000511138 Jy ! Component: 150 - total flux cleaned = -0.000564381 Jy ! Component: 200 - total flux cleaned = -0.000607454 Jy ! Total flux subtracted in 200 components = -0.000607454 Jy ! Clean residual min=-0.002738 max=0.002471 Jy/beam ! Clean residual mean=0.000001 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.248344 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.64353e-05 Jy ! Component: 100 - total flux cleaned = -0.000104241 Jy ! Component: 150 - total flux cleaned = -0.000167535 Jy ! Component: 200 - total flux cleaned = -0.000254467 Jy ! Total flux subtracted in 200 components = -0.000254467 Jy ! Clean residual min=-0.002724 max=0.002447 Jy/beam ! Clean residual mean=0.000001 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.24809 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 68 components and 0.24809 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=8.038 mas, bpa=-3.071 degrees ! Estimated noise=952.791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000794605 Jy ! Component: 100 - total flux cleaned = 0.00046001 Jy ! Component: 150 - total flux cleaned = 0.00029123 Jy ! Component: 200 - total flux cleaned = 0.000189045 Jy ! Total flux subtracted in 200 components = 0.000189045 Jy ! Clean residual min=-0.002325 max=0.002773 Jy/beam ! Clean residual mean=0.000001 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.248279 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 85 components and 0.248279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054798Jy sigma=0.000670 ! Fit after self-cal, rms=0.054793Jy sigma=0.000670 wmodel J1505+0326_S_2017_02_24_pus_map.mod ! Writing 85 model components to file: J1505+0326_S_2017_02_24_pus_map.mod wobs J1505+0326_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1505+0326_S_2017_02_24_pus_uvs.fits wwins J1505+0326_S_2017_02_24_pus_map.win ! wwins: Wrote 3 windows to J1505+0326_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000587077 Jy ! Component: 100 - total flux cleaned = 0.000842915 Jy ! Component: 150 - total flux cleaned = 0.00116903 Jy ! Component: 200 - total flux cleaned = 0.00152282 Jy ! Component: 250 - total flux cleaned = 0.00182877 Jy ! Component: 300 - total flux cleaned = 0.0021641 Jy ! Component: 350 - total flux cleaned = 0.00249163 Jy ! Component: 400 - total flux cleaned = 0.00274096 Jy ! Component: 450 - total flux cleaned = 0.00309038 Jy ! Component: 500 - total flux cleaned = 0.00339959 Jy ! Component: 550 - total flux cleaned = 0.00366973 Jy ! Component: 600 - total flux cleaned = 0.00400216 Jy ! Component: 650 - total flux cleaned = 0.00423139 Jy ! Component: 700 - total flux cleaned = 0.00455459 Jy ! Component: 750 - total flux cleaned = 0.00474542 Jy ! Component: 800 - total flux cleaned = 0.00490169 Jy ! Component: 850 - total flux cleaned = 0.00493289 Jy ! Component: 900 - total flux cleaned = 0.00508574 Jy ! Component: 950 - total flux cleaned = 0.00517639 Jy ! Component: 1000 - total flux cleaned = 0.00529565 Jy ! Component: 1050 - total flux cleaned = 0.00535467 Jy ! Component: 1100 - total flux cleaned = 0.00552907 Jy ! Component: 1150 - total flux cleaned = 0.00570129 Jy ! Component: 1200 - total flux cleaned = 0.00575809 Jy ! Component: 1250 - total flux cleaned = 0.00595452 Jy ! Component: 1300 - total flux cleaned = 0.00603715 Jy ! Component: 1350 - total flux cleaned = 0.00622871 Jy ! Component: 1400 - total flux cleaned = 0.00625525 Jy ! Component: 1450 - total flux cleaned = 0.00641544 Jy ! Component: 1500 - total flux cleaned = 0.006442 Jy ! Component: 1550 - total flux cleaned = 0.00662508 Jy ! Component: 1600 - total flux cleaned = 0.00662464 Jy ! Component: 1650 - total flux cleaned = 0.00672714 Jy ! Component: 1700 - total flux cleaned = 0.00687985 Jy ! Component: 1750 - total flux cleaned = 0.00693024 Jy ! Component: 1800 - total flux cleaned = 0.00700493 Jy ! Component: 1850 - total flux cleaned = 0.00700511 Jy ! Component: 1900 - total flux cleaned = 0.00717642 Jy ! Component: 1950 - total flux cleaned = 0.00712808 Jy ! Component: 2000 - total flux cleaned = 0.0072004 Jy ! Component: 2050 - total flux cleaned = 0.00727195 Jy ! Component: 2100 - total flux cleaned = 0.00734287 Jy ! Component: 2150 - total flux cleaned = 0.00731934 Jy ! Component: 2200 - total flux cleaned = 0.00736594 Jy ! Component: 2250 - total flux cleaned = 0.00750408 Jy ! Component: 2300 - total flux cleaned = 0.0075719 Jy ! Component: 2350 - total flux cleaned = 0.00750427 Jy ! Component: 2400 - total flux cleaned = 0.00761647 Jy ! Component: 2450 - total flux cleaned = 0.00763857 Jy ! Component: 2500 - total flux cleaned = 0.00772695 Jy ! Component: 2550 - total flux cleaned = 0.00777052 Jy ! Component: 2600 - total flux cleaned = 0.00774835 Jy ! Component: 2650 - total flux cleaned = 0.00764037 Jy ! Component: 2700 - total flux cleaned = 0.00768294 Jy ! Component: 2750 - total flux cleaned = 0.00772559 Jy ! Component: 2800 - total flux cleaned = 0.00781008 Jy ! Component: 2850 - total flux cleaned = 0.00785191 Jy ! Component: 2900 - total flux cleaned = 0.00781009 Jy ! Component: 2950 - total flux cleaned = 0.00778939 Jy ! Component: 3000 - total flux cleaned = 0.00778944 Jy ! Component: 3050 - total flux cleaned = 0.00776917 Jy ! Component: 3100 - total flux cleaned = 0.00780953 Jy ! Component: 3150 - total flux cleaned = 0.00778929 Jy ! Component: 3200 - total flux cleaned = 0.00774946 Jy ! Component: 3250 - total flux cleaned = 0.00772966 Jy ! Component: 3300 - total flux cleaned = 0.00770986 Jy ! Component: 3350 - total flux cleaned = 0.00763183 Jy ! Component: 3400 - total flux cleaned = 0.00759317 Jy ! Component: 3450 - total flux cleaned = 0.00761278 Jy ! Component: 3500 - total flux cleaned = 0.00761282 Jy ! Component: 3550 - total flux cleaned = 0.00763214 Jy ! Component: 3600 - total flux cleaned = 0.00765099 Jy ! Component: 3650 - total flux cleaned = 0.00766987 Jy ! Component: 3700 - total flux cleaned = 0.00763249 Jy ! Component: 3750 - total flux cleaned = 0.00770667 Jy ! Component: 3800 - total flux cleaned = 0.00763293 Jy ! Component: 3850 - total flux cleaned = 0.00766975 Jy ! Component: 3900 - total flux cleaned = 0.00774237 Jy ! Component: 3950 - total flux cleaned = 0.00763372 Jy ! Component: 4000 - total flux cleaned = 0.00772382 Jy ! Component: 4050 - total flux cleaned = 0.00775964 Jy ! Total flux subtracted in 4096 components = 0.0077062 Jy ! Clean residual min=-0.001065 max=0.001137 Jy/beam ! Clean residual mean=0.000000 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.255985 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 356 components and 0.255985 Jy ![Exited script file: muppet] wmap "J1505+0326_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.478 x 8.038 at -3.071 degrees (North through East) ! Clean map min=-0.0020889 max=0.25842 Jy/beam ! Writing clean map to FITS file: J1505+0326_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.258422 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000330475 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.383645 0.383645 0.76729 1.53458 3.06916 6.13832 12.2766 24.5533 49.1065 98.2131 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.258 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.478 x 8.038 at -3.071 degrees (North through East) ! Clean map min=-0.0020889 max=0.25842 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1505+0326_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:29:15 2019