! Started logfile: J1503+0419_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:15:54 2019 obs J1503+0419_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1503+0419_S_2017_01_16_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.765194 visibilities/baseline/integration-bin. ! Found source: J1503+0419 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 11432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1503+0419_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.866301Jy sigma=0.006986 ! Fit after self-cal, rms=0.857526Jy sigma=0.006935 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.6 mas, bmaj=9.144 mas, bpa=17.62 degrees ! Estimated noise=1180.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.116315 Jy ! Component: 100 - total flux cleaned = 0.141702 Jy ! Total flux subtracted in 100 components = 0.141702 Jy ! Clean residual min=-0.005133 max=0.007483 Jy/beam ! Clean residual mean=0.000004 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.141702 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.141702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108040Jy sigma=0.000678 ! Fit after self-cal, rms=0.107980Jy sigma=0.000678 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.324 mas, bmaj=9.851 mas, bpa=16.84 degrees ! Estimated noise=866.455 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010806 Jy ! Component: 100 - total flux cleaned = 0.0168438 Jy ! Component: 150 - total flux cleaned = 0.0203567 Jy ! Component: 200 - total flux cleaned = 0.0225032 Jy ! Total flux subtracted in 200 components = 0.0225032 Jy ! Clean residual min=-0.003239 max=0.003630 Jy/beam ! Clean residual mean=-0.000004 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.164205 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 37 components and 0.164205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107052Jy sigma=0.000666 ! Fit after self-cal, rms=0.106952Jy sigma=0.000666 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.95 HN 0.95 KP 1.00 ! LA 1.03 MK 1.00* NL 0.93 OV 0.99 ! PT 0.96 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 0.99 KP 0.95 ! LA 0.99 MK 1.00* NL 1.07 OV 1.02 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.99 KP 0.99 ! LA 1.06 MK 1.00* NL 1.04 OV 0.90 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 0.94 KP 1.80 ! LA 1.04 MK 1.00* NL 1.00* OV 0.99 ! PT 0.94 SC 1.13 ! ! ! Fit before self-cal, rms=0.106952Jy sigma=0.000666 ! Fit after self-cal, rms=0.126457Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.319 mas, bmaj=9.843 mas, bpa=16.41 degrees ! Estimated noise=865.626 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105489 Jy ! Component: 100 - total flux cleaned = 0.000906859 Jy ! Component: 150 - total flux cleaned = 0.000740643 Jy ! Component: 200 - total flux cleaned = 0.000600207 Jy ! Total flux subtracted in 200 components = 0.000600207 Jy ! Clean residual min=-0.002528 max=0.003105 Jy/beam ! Clean residual mean=-0.000007 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.164805 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.164805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126416Jy sigma=0.000659 ! Fit after self-cal, rms=0.126934Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126934Jy sigma=0.000659 ! Fit after self-cal, rms=0.130486Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.31 mas, bmaj=9.817 mas, bpa=16.42 degrees ! Estimated noise=867.638 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340035 Jy ! Component: 100 - total flux cleaned = 0.000280219 Jy ! Component: 150 - total flux cleaned = 0.000200728 Jy ! Component: 200 - total flux cleaned = 0.00017666 Jy ! Total flux subtracted in 200 components = 0.00017666 Jy ! Clean residual min=-0.002055 max=0.002703 Jy/beam ! Clean residual mean=0.000003 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.164982 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.164982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130471Jy sigma=0.000654 ! Fit after self-cal, rms=0.130549Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (93.5, -62.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195573 Jy ! Component: 100 - total flux cleaned = 0.00185144 Jy ! Component: 150 - total flux cleaned = 0.00175784 Jy ! Component: 200 - total flux cleaned = 0.00161676 Jy ! Total flux subtracted in 200 components = 0.00161676 Jy ! Clean residual min=-0.001907 max=0.002510 Jy/beam ! Clean residual mean=0.000003 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.166598 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 0.166598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130510Jy sigma=0.000653 ! Fit after self-cal, rms=0.130473Jy sigma=0.000653 ! Inverting map ! Added new window around map position (74, -82.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000761701 Jy ! Component: 100 - total flux cleaned = 0.000557863 Jy ! Component: 150 - total flux cleaned = 0.000612509 Jy ! Component: 200 - total flux cleaned = 0.000655287 Jy ! Total flux subtracted in 200 components = 0.000655287 Jy ! Clean residual min=-0.001800 max=0.002257 Jy/beam ! Clean residual mean=0.000003 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.167254 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 102 components and 0.167254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130389Jy sigma=0.000652 ! Fit after self-cal, rms=0.130364Jy sigma=0.000652 ! Inverting map ! Added new window around map position (98.5, 75.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119124 Jy ! Component: 100 - total flux cleaned = 0.00119909 Jy ! Component: 150 - total flux cleaned = 0.00102794 Jy ! Component: 200 - total flux cleaned = 0.000988001 Jy ! Total flux subtracted in 200 components = 0.000988001 Jy ! Clean residual min=-0.001738 max=0.001986 Jy/beam ! Clean residual mean=0.000003 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.168242 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 123 components and 0.168242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130306Jy sigma=0.000652 ! Fit after self-cal, rms=0.130298Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130298Jy sigma=0.000652 ! Fit after self-cal, rms=0.129157Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.301 mas, bmaj=9.801 mas, bpa=16.39 degrees ! Estimated noise=867.337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507141 Jy ! Component: 100 - total flux cleaned = 0.000468482 Jy ! Component: 150 - total flux cleaned = 0.000356908 Jy ! Component: 200 - total flux cleaned = 0.000253956 Jy ! Total flux subtracted in 200 components = 0.000253956 Jy ! Clean residual min=-0.001721 max=0.001932 Jy/beam ! Clean residual mean=0.000006 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.168496 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 136 components and 0.168496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129125Jy sigma=0.000651 ! Fit after self-cal, rms=0.129144Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.29624e-05 Jy ! Component: 100 - total flux cleaned = -6.34818e-05 Jy ! Component: 150 - total flux cleaned = -6.26421e-05 Jy ! Component: 200 - total flux cleaned = -3.30247e-05 Jy ! Total flux subtracted in 200 components = -3.30247e-05 Jy ! Clean residual min=-0.001717 max=0.001913 Jy/beam ! Clean residual mean=0.000006 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.168463 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 155 components and 0.168463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129126Jy sigma=0.000651 ! Fit after self-cal, rms=0.129128Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129128Jy sigma=0.000651 ! Fit after self-cal, rms=0.128948Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.991 mas, bmaj=12.13 mas, bpa=5.673 degrees ! Estimated noise=993.698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129794 Jy ! Component: 100 - total flux cleaned = -0.000423283 Jy ! Component: 150 - total flux cleaned = -0.000567047 Jy ! Component: 200 - total flux cleaned = -0.000698191 Jy ! Total flux subtracted in 200 components = -0.000698191 Jy ! Clean residual min=-0.002033 max=0.002034 Jy/beam ! Clean residual mean=0.000010 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.167764 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 171 components and 0.167764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128942Jy sigma=0.000651 ! Fit after self-cal, rms=0.128939Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.89389e-05 Jy ! Component: 100 - total flux cleaned = -0.000177464 Jy ! Component: 150 - total flux cleaned = -0.000270075 Jy ! Component: 200 - total flux cleaned = -0.000377742 Jy ! Total flux subtracted in 200 components = -0.000377742 Jy ! Clean residual min=-0.002026 max=0.002019 Jy/beam ! Clean residual mean=0.000010 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.167387 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 179 components and 0.167387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128935Jy sigma=0.000651 ! Fit after self-cal, rms=0.128941Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.3 mas, bmaj=9.799 mas, bpa=16.38 degrees ! Estimated noise=866.659 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.3 x 9.799 at 16.38 degrees (North through East) ! Clean map min=-0.0026986 max=0.14784 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.585 mas, bmaj=9.096 mas, bpa=17.2 degrees ! Estimated noise=1180.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11612 Jy ! Component: 100 - total flux cleaned = 0.141598 Jy ! Component: 150 - total flux cleaned = 0.150196 Jy ! Component: 200 - total flux cleaned = 0.154266 Jy ! Total flux subtracted in 200 components = 0.154266 Jy ! Clean residual min=-0.003091 max=0.003233 Jy/beam ! Clean residual mean=0.000003 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.154266 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.154266 Jy ! Inverting map and beam ! Estimated beam: bmin=4.3 mas, bmaj=9.799 mas, bpa=16.38 degrees ! Estimated noise=866.659 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504652 Jy ! Component: 100 - total flux cleaned = 0.00837443 Jy ! Component: 150 - total flux cleaned = 0.0102825 Jy ! Component: 200 - total flux cleaned = 0.0113482 Jy ! Total flux subtracted in 200 components = 0.0113482 Jy ! Clean residual min=-0.001961 max=0.001917 Jy/beam ! Clean residual mean=0.000007 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.165614 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 48 components and 0.165614 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.991 mas, bmaj=12.13 mas, bpa=5.673 degrees ! Estimated noise=993.698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161592 Jy ! Component: 100 - total flux cleaned = 0.00181918 Jy ! Component: 150 - total flux cleaned = 0.00170441 Jy ! Component: 200 - total flux cleaned = 0.0016 Jy ! Total flux subtracted in 200 components = 0.0016 Jy ! Clean residual min=-0.001971 max=0.002072 Jy/beam ! Clean residual mean=0.000011 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.167214 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000147735 Jy ! Component: 100 - total flux cleaned = -0.000147969 Jy ! Component: 150 - total flux cleaned = -0.000190707 Jy ! Component: 200 - total flux cleaned = -0.000191094 Jy ! Total flux subtracted in 200 components = -0.000191094 Jy ! Clean residual min=-0.001939 max=0.002023 Jy/beam ! Clean residual mean=0.000010 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.167023 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 104 components and 0.167023 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.3 mas, bmaj=9.799 mas, bpa=16.38 degrees ! Estimated noise=866.659 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253101 Jy ! Component: 100 - total flux cleaned = 0.000205293 Jy ! Component: 150 - total flux cleaned = 0.000251165 Jy ! Component: 200 - total flux cleaned = 0.000251199 Jy ! Total flux subtracted in 200 components = 0.000251199 Jy ! Clean residual min=-0.001668 max=0.001651 Jy/beam ! Clean residual mean=0.000006 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.167274 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 134 components and 0.167274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128959Jy sigma=0.000651 ! Fit after self-cal, rms=0.128931Jy sigma=0.000651 wmodel J1503+0419_S_2017_01_16_pus_map.mod ! Writing 134 model components to file: J1503+0419_S_2017_01_16_pus_map.mod wobs J1503+0419_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1503+0419_S_2017_01_16_pus_uvs.fits wwins J1503+0419_S_2017_01_16_pus_map.win ! wwins: Wrote 5 windows to J1503+0419_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013102 Jy ! Component: 100 - total flux cleaned = -7.08658e-05 Jy ! Component: 150 - total flux cleaned = -9.98211e-05 Jy ! Component: 200 - total flux cleaned = -0.000154956 Jy ! Component: 250 - total flux cleaned = -7.50221e-05 Jy ! Component: 300 - total flux cleaned = 8.07739e-05 Jy ! Component: 350 - total flux cleaned = 0.000233546 Jy ! Component: 400 - total flux cleaned = 0.000408299 Jy ! Component: 450 - total flux cleaned = 0.000555001 Jy ! Component: 500 - total flux cleaned = 0.000674714 Jy ! Component: 550 - total flux cleaned = 0.000769023 Jy ! Component: 600 - total flux cleaned = 0.000838653 Jy ! Component: 650 - total flux cleaned = 0.000929764 Jy ! Component: 700 - total flux cleaned = 0.000952142 Jy ! Component: 750 - total flux cleaned = 0.00104062 Jy ! Component: 800 - total flux cleaned = 0.00106188 Jy ! Component: 850 - total flux cleaned = 0.00101914 Jy ! Component: 900 - total flux cleaned = 0.001146 Jy ! Component: 950 - total flux cleaned = 0.00124963 Jy ! Component: 1000 - total flux cleaned = 0.00131079 Jy ! Component: 1050 - total flux cleaned = 0.00141223 Jy ! Component: 1100 - total flux cleaned = 0.00151235 Jy ! Component: 1150 - total flux cleaned = 0.00157171 Jy ! Component: 1200 - total flux cleaned = 0.00163068 Jy ! Component: 1250 - total flux cleaned = 0.0017469 Jy ! Component: 1300 - total flux cleaned = 0.00182325 Jy ! Component: 1350 - total flux cleaned = 0.00186113 Jy ! Component: 1400 - total flux cleaned = 0.00191769 Jy ! Component: 1450 - total flux cleaned = 0.00201035 Jy ! Component: 1500 - total flux cleaned = 0.00204711 Jy ! Component: 1550 - total flux cleaned = 0.0021375 Jy ! Component: 1600 - total flux cleaned = 0.0021552 Jy ! Component: 1650 - total flux cleaned = 0.0021556 Jy ! Component: 1700 - total flux cleaned = 0.00226129 Jy ! Component: 1750 - total flux cleaned = 0.00226119 Jy ! Component: 1800 - total flux cleaned = 0.0022784 Jy ! Component: 1850 - total flux cleaned = 0.00229602 Jy ! Component: 1900 - total flux cleaned = 0.00229611 Jy ! Component: 1950 - total flux cleaned = 0.00236343 Jy ! Component: 2000 - total flux cleaned = 0.00233027 Jy ! Component: 2050 - total flux cleaned = 0.00238011 Jy ! Component: 2100 - total flux cleaned = 0.00246208 Jy ! Component: 2150 - total flux cleaned = 0.00246203 Jy ! Component: 2200 - total flux cleaned = 0.00254251 Jy ! Component: 2250 - total flux cleaned = 0.00252659 Jy ! Component: 2300 - total flux cleaned = 0.00255843 Jy ! Component: 2350 - total flux cleaned = 0.00265252 Jy ! Component: 2400 - total flux cleaned = 0.0026682 Jy ! Component: 2450 - total flux cleaned = 0.00263742 Jy ! Component: 2500 - total flux cleaned = 0.00269903 Jy ! Component: 2550 - total flux cleaned = 0.00266867 Jy ! Component: 2600 - total flux cleaned = 0.00269902 Jy ! Component: 2650 - total flux cleaned = 0.00274415 Jy ! Component: 2700 - total flux cleaned = 0.00272933 Jy ! Component: 2750 - total flux cleaned = 0.00272937 Jy ! Component: 2800 - total flux cleaned = 0.00277376 Jy ! Component: 2850 - total flux cleaned = 0.00283217 Jy ! Component: 2900 - total flux cleaned = 0.00289025 Jy ! Component: 2950 - total flux cleaned = 0.00286153 Jy ! Component: 3000 - total flux cleaned = 0.00290465 Jy ! Component: 3050 - total flux cleaned = 0.0029901 Jy ! Component: 3100 - total flux cleaned = 0.00299011 Jy ! Component: 3150 - total flux cleaned = 0.00301815 Jy ! Component: 3200 - total flux cleaned = 0.00306012 Jy ! Component: 3250 - total flux cleaned = 0.00312947 Jy ! Component: 3300 - total flux cleaned = 0.00314325 Jy ! Component: 3350 - total flux cleaned = 0.00314341 Jy ! Component: 3400 - total flux cleaned = 0.00319785 Jy ! Component: 3450 - total flux cleaned = 0.00326555 Jy ! Component: 3500 - total flux cleaned = 0.00327892 Jy ! Component: 3550 - total flux cleaned = 0.00329246 Jy ! Component: 3600 - total flux cleaned = 0.00335894 Jy ! Component: 3650 - total flux cleaned = 0.00343824 Jy ! Component: 3700 - total flux cleaned = 0.00338562 Jy ! Component: 3750 - total flux cleaned = 0.00343804 Jy ! Component: 3800 - total flux cleaned = 0.00347711 Jy ! Component: 3850 - total flux cleaned = 0.00347714 Jy ! Component: 3900 - total flux cleaned = 0.00354155 Jy ! Component: 3950 - total flux cleaned = 0.00358007 Jy ! Component: 4000 - total flux cleaned = 0.00363109 Jy ! Component: 4050 - total flux cleaned = 0.00366903 Jy ! Total flux subtracted in 4096 components = 0.0037194 Jy ! Clean residual min=-0.000690 max=0.000780 Jy/beam ! Clean residual mean=0.000004 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.170994 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 427 components and 0.170994 Jy ![Exited script file: muppet] wmap "J1503+0419_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.3 x 9.799 at 16.38 degrees (North through East) ! Clean map min=-0.0020926 max=0.1482 Jy/beam ! Writing clean map to FITS file: J1503+0419_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.148198 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000249478 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.505024 0.505024 1.01005 2.0201 4.04019 8.08039 16.1608 32.3215 64.6431 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.148 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.3 x 9.799 at 16.38 degrees (North through East) ! Clean map min=-0.0020926 max=0.1482 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1503+0419_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:16:00 2019