! Started logfile: J1500-2358_S_2017_08_12_pus_uvs.log on Fri May 10 15:01:56 2019 obs J1500-2358_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1500-2358_S_2017_08_12_pus_uva.fits ! AN table 1: 74 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.452853 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1500-2358 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 6032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1500-2358_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 254 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 740 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.868999Jy sigma=0.006467 ! Fit after self-cal, rms=0.856546Jy sigma=0.006387 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.223 mas, bmaj=6.352 mas, bpa=-1.835 degrees ! Estimated noise=2516.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109435 Jy ! Component: 100 - total flux cleaned = 0.148524 Jy ! Total flux subtracted in 100 components = 0.148524 Jy ! Clean residual min=-0.010144 max=0.019451 Jy/beam ! Clean residual mean=-0.000158 rms=0.003728 Jy/beam ! Combined flux in latest and established models = 0.148524 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.148524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098710Jy sigma=0.000717 ! Fit after self-cal, rms=0.098525Jy sigma=0.000715 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=7.126 mas, bpa=-1.708 degrees ! Estimated noise=1440.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0256516 Jy ! Component: 100 - total flux cleaned = 0.0380027 Jy ! Component: 150 - total flux cleaned = 0.0445033 Jy ! Component: 200 - total flux cleaned = 0.0480467 Jy ! Total flux subtracted in 200 components = 0.0480467 Jy ! Clean residual min=-0.003733 max=0.003967 Jy/beam ! Clean residual mean=-0.000037 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 0.19657 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 55 components and 0.19657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092325Jy sigma=0.000667 ! Fit after self-cal, rms=0.092271Jy sigma=0.000666 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.06 ! LA 1.04 MK 1.03 NL 0.87 OV 0.97 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.99 ! LA 0.98 MK 1.00 NL 1.05 OV 1.01 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.04 ! LA 0.93 MK 1.00 NL 1.01 OV 0.93 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.092271Jy sigma=0.000666 ! Fit after self-cal, rms=0.090634Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.692 mas, bmaj=7.142 mas, bpa=-1.672 degrees ! Estimated noise=1425.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000511913 Jy ! Component: 100 - total flux cleaned = 0.000591625 Jy ! Component: 150 - total flux cleaned = 0.00055851 Jy ! Component: 200 - total flux cleaned = 0.000528315 Jy ! Total flux subtracted in 200 components = 0.000528315 Jy ! Clean residual min=-0.003375 max=0.003177 Jy/beam ! Clean residual mean=-0.000014 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.197099 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 0.197099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090603Jy sigma=0.000661 ! Fit after self-cal, rms=0.090634Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090634Jy sigma=0.000661 ! Fit after self-cal, rms=0.090653Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.689 mas, bmaj=7.137 mas, bpa=-1.652 degrees ! Estimated noise=1426.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000537978 Jy ! Component: 100 - total flux cleaned = 0.000536839 Jy ! Component: 150 - total flux cleaned = 0.000536345 Jy ! Component: 200 - total flux cleaned = 0.000510773 Jy ! Total flux subtracted in 200 components = 0.000510773 Jy ! Clean residual min=-0.003025 max=0.002858 Jy/beam ! Clean residual mean=-0.000009 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.197609 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 78 components and 0.197609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090636Jy sigma=0.000660 ! Fit after self-cal, rms=0.090641Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165928 Jy ! Component: 100 - total flux cleaned = 0.000166439 Jy ! Component: 150 - total flux cleaned = 0.000142505 Jy ! Component: 200 - total flux cleaned = 0.000121678 Jy ! Total flux subtracted in 200 components = 0.000121678 Jy ! Clean residual min=-0.003058 max=0.002856 Jy/beam ! Clean residual mean=-0.000009 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.197731 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 81 components and 0.197731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090629Jy sigma=0.000660 ! Fit after self-cal, rms=0.090627Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090627Jy sigma=0.000660 ! Fit after self-cal, rms=0.090804Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.689 mas, bmaj=7.137 mas, bpa=-1.625 degrees ! Estimated noise=1426.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000230379 Jy ! Component: 100 - total flux cleaned = 0.000230376 Jy ! Component: 150 - total flux cleaned = 0.000189358 Jy ! Component: 200 - total flux cleaned = 0.000170927 Jy ! Total flux subtracted in 200 components = 0.000170927 Jy ! Clean residual min=-0.002813 max=0.002884 Jy/beam ! Clean residual mean=-0.000005 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.197902 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 87 components and 0.197902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090794Jy sigma=0.000659 ! Fit after self-cal, rms=0.090802Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000132591 Jy ! Component: 100 - total flux cleaned = 9.29659e-05 Jy ! Component: 150 - total flux cleaned = 7.57697e-05 Jy ! Component: 200 - total flux cleaned = 5.89009e-05 Jy ! Total flux subtracted in 200 components = 5.89009e-05 Jy ! Clean residual min=-0.002792 max=0.002863 Jy/beam ! Clean residual mean=-0.000005 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.197961 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 91 components and 0.197961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090795Jy sigma=0.000659 ! Fit after self-cal, rms=0.090793Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090793Jy sigma=0.000659 ! Fit after self-cal, rms=0.090845Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.802 mas, bmaj=21.08 mas, bpa=-4.488 degrees ! Estimated noise=1988.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015168 Jy ! Component: 100 - total flux cleaned = 0.00013541 Jy ! Component: 150 - total flux cleaned = 0.000122663 Jy ! Component: 200 - total flux cleaned = 0.000131666 Jy ! Total flux subtracted in 200 components = 0.000131666 Jy ! Clean residual min=-0.002201 max=0.001750 Jy/beam ! Clean residual mean=-0.000013 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.198093 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 96 components and 0.198093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090845Jy sigma=0.000659 ! Fit after self-cal, rms=0.090844Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.45289e-05 Jy ! Component: 100 - total flux cleaned = 4.82962e-05 Jy ! Component: 150 - total flux cleaned = 4.86919e-05 Jy ! Component: 200 - total flux cleaned = 6.68101e-05 Jy ! Total flux subtracted in 200 components = 6.68101e-05 Jy ! Clean residual min=-0.002213 max=0.001768 Jy/beam ! Clean residual mean=-0.000012 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.198159 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 100 components and 0.198159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090843Jy sigma=0.000659 ! Fit after self-cal, rms=0.090842Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=7.137 mas, bpa=-1.597 degrees ! Estimated noise=1427.33 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.69 x 7.137 at -1.597 degrees (North through East) ! Clean map min=-0.0028085 max=0.14372 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.235 mas, bmaj=6.34 mas, bpa=-1.698 degrees ! Estimated noise=2489.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108275 Jy ! Component: 100 - total flux cleaned = 0.148492 Jy ! Component: 150 - total flux cleaned = 0.170594 Jy ! Component: 200 - total flux cleaned = 0.183386 Jy ! Total flux subtracted in 200 components = 0.183386 Jy ! Clean residual min=-0.006514 max=0.007307 Jy/beam ! Clean residual mean=-0.000061 rms=0.002109 Jy/beam ! Combined flux in latest and established models = 0.183386 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.183386 Jy ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=7.137 mas, bpa=-1.597 degrees ! Estimated noise=1427.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0069957 Jy ! Component: 100 - total flux cleaned = 0.0106836 Jy ! Component: 150 - total flux cleaned = 0.0128279 Jy ! Component: 200 - total flux cleaned = 0.0139059 Jy ! Total flux subtracted in 200 components = 0.0139059 Jy ! Clean residual min=-0.003045 max=0.002842 Jy/beam ! Clean residual mean=-0.000009 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.197292 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 67 components and 0.197292 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.802 mas, bmaj=21.08 mas, bpa=-4.488 degrees ! Estimated noise=1988.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000865505 Jy ! Component: 100 - total flux cleaned = 0.00088407 Jy ! Component: 150 - total flux cleaned = 0.000899466 Jy ! Component: 200 - total flux cleaned = 0.000925417 Jy ! Total flux subtracted in 200 components = 0.000925417 Jy ! Clean residual min=-0.002215 max=0.001826 Jy/beam ! Clean residual mean=-0.000013 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.198217 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.12935e-05 Jy ! Component: 100 - total flux cleaned = 3.01471e-05 Jy ! Component: 150 - total flux cleaned = 3.88233e-05 Jy ! Component: 200 - total flux cleaned = 3.12743e-05 Jy ! Total flux subtracted in 200 components = 3.12743e-05 Jy ! Clean residual min=-0.002198 max=0.001812 Jy/beam ! Clean residual mean=-0.000013 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.198249 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 88 components and 0.198249 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=7.137 mas, bpa=-1.597 degrees ! Estimated noise=1427.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127939 Jy ! Component: 100 - total flux cleaned = -6.145e-05 Jy ! Component: 150 - total flux cleaned = -6.39153e-05 Jy ! Component: 200 - total flux cleaned = -4.05791e-05 Jy ! Total flux subtracted in 200 components = -4.05791e-05 Jy ! Clean residual min=-0.002889 max=0.002945 Jy/beam ! Clean residual mean=-0.000005 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.198208 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 102 components and 0.198208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090865Jy sigma=0.000659 ! Fit after self-cal, rms=0.090861Jy sigma=0.000659 wmodel J1500-2358_S_2017_08_12_pus_map.mod ! Writing 102 model components to file: J1500-2358_S_2017_08_12_pus_map.mod wobs J1500-2358_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1500-2358_S_2017_08_12_pus_uvs.fits wwins J1500-2358_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J1500-2358_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000159726 Jy ! Component: 100 - total flux cleaned = -0.000256845 Jy ! Component: 150 - total flux cleaned = -0.000116392 Jy ! Component: 200 - total flux cleaned = -7.13532e-05 Jy ! Component: 250 - total flux cleaned = 0.000104816 Jy ! Component: 300 - total flux cleaned = 0.000272653 Jy ! Component: 350 - total flux cleaned = 0.000232627 Jy ! Component: 400 - total flux cleaned = 0.000428133 Jy ! Component: 450 - total flux cleaned = 0.000426299 Jy ! Component: 500 - total flux cleaned = 0.000390958 Jy ! Component: 550 - total flux cleaned = 0.00039206 Jy ! Component: 600 - total flux cleaned = 0.000289269 Jy ! Component: 650 - total flux cleaned = 0.000188539 Jy ! Component: 700 - total flux cleaned = 2.5785e-05 Jy ! Component: 750 - total flux cleaned = -5.62269e-06 Jy ! Component: 800 - total flux cleaned = -0.000220818 Jy ! Component: 850 - total flux cleaned = -0.000280855 Jy ! Component: 900 - total flux cleaned = -0.000456168 Jy ! Component: 950 - total flux cleaned = -0.000570493 Jy ! Component: 1000 - total flux cleaned = -0.000709807 Jy ! Component: 1050 - total flux cleaned = -0.00081855 Jy ! Component: 1100 - total flux cleaned = -0.000924328 Jy ! Component: 1150 - total flux cleaned = -0.00105372 Jy ! Component: 1200 - total flux cleaned = -0.00118008 Jy ! Component: 1250 - total flux cleaned = -0.00130431 Jy ! Component: 1300 - total flux cleaned = -0.00145095 Jy ! Component: 1350 - total flux cleaned = -0.00159419 Jy ! Component: 1400 - total flux cleaned = -0.00164113 Jy ! Component: 1450 - total flux cleaned = -0.00168795 Jy ! Component: 1500 - total flux cleaned = -0.00177903 Jy ! Component: 1550 - total flux cleaned = -0.00180175 Jy ! Component: 1600 - total flux cleaned = -0.00193349 Jy ! Component: 1650 - total flux cleaned = -0.00199834 Jy ! Component: 1700 - total flux cleaned = -0.0020195 Jy ! Component: 1750 - total flux cleaned = -0.0021037 Jy ! Component: 1800 - total flux cleaned = -0.00222838 Jy ! Component: 1850 - total flux cleaned = -0.00226938 Jy ! Component: 1900 - total flux cleaned = -0.00237048 Jy ! Component: 1950 - total flux cleaned = -0.00241037 Jy ! Component: 2000 - total flux cleaned = -0.00250915 Jy ! Component: 2050 - total flux cleaned = -0.00256745 Jy ! Component: 2100 - total flux cleaned = -0.00252907 Jy ! Component: 2150 - total flux cleaned = -0.00260549 Jy ! Component: 2200 - total flux cleaned = -0.0025867 Jy ! Component: 2250 - total flux cleaned = -0.00262433 Jy ! Component: 2300 - total flux cleaned = -0.00266179 Jy ! Component: 2350 - total flux cleaned = -0.00273547 Jy ! Component: 2400 - total flux cleaned = -0.00273551 Jy ! Component: 2450 - total flux cleaned = -0.0027536 Jy ! Component: 2500 - total flux cleaned = -0.00280756 Jy ! Component: 2550 - total flux cleaned = -0.00284334 Jy ! Component: 2600 - total flux cleaned = -0.00287867 Jy ! Component: 2650 - total flux cleaned = -0.00287864 Jy ! Component: 2700 - total flux cleaned = -0.00287853 Jy ! Component: 2750 - total flux cleaned = -0.00291354 Jy ! Component: 2800 - total flux cleaned = -0.00293085 Jy ! Component: 2850 - total flux cleaned = -0.00294824 Jy ! Component: 2900 - total flux cleaned = -0.00296559 Jy ! Component: 2950 - total flux cleaned = -0.00298282 Jy ! Component: 3000 - total flux cleaned = -0.00301717 Jy ! Component: 3050 - total flux cleaned = -0.00306838 Jy ! Component: 3100 - total flux cleaned = -0.00308546 Jy ! Component: 3150 - total flux cleaned = -0.00318712 Jy ! Component: 3200 - total flux cleaned = -0.00322077 Jy ! Component: 3250 - total flux cleaned = -0.00325441 Jy ! Component: 3300 - total flux cleaned = -0.00330474 Jy ! Component: 3350 - total flux cleaned = -0.00340525 Jy ! Component: 3400 - total flux cleaned = -0.00343865 Jy ! Component: 3450 - total flux cleaned = -0.003522 Jy ! Component: 3500 - total flux cleaned = -0.00360524 Jy ! Component: 3550 - total flux cleaned = -0.00365512 Jy ! Component: 3600 - total flux cleaned = -0.00372152 Jy ! Component: 3650 - total flux cleaned = -0.00378783 Jy ! Component: 3700 - total flux cleaned = -0.0038376 Jy ! Component: 3750 - total flux cleaned = -0.00392049 Jy ! Component: 3800 - total flux cleaned = -0.00397018 Jy ! Component: 3850 - total flux cleaned = -0.00406962 Jy ! Component: 3900 - total flux cleaned = -0.00413585 Jy ! Component: 3950 - total flux cleaned = -0.004169 Jy ! Component: 4000 - total flux cleaned = -0.00423523 Jy ! Component: 4050 - total flux cleaned = -0.00430157 Jy ! Total flux subtracted in 4096 components = -0.00440098 Jy ! Clean residual min=-0.000941 max=0.001003 Jy/beam ! Clean residual mean=-0.000005 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.193807 Jy keep ! Adding 213 model components to the UV plane model. ! The established model now contains 315 components and 0.193807 Jy ![Exited script file: muppet] wmap "J1500-2358_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.69 x 7.137 at -1.597 degrees (North through East) ! Clean map min=-0.0021943 max=0.14241 Jy/beam ! Writing clean map to FITS file: J1500-2358_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.142414 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000242471 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.510772 0.510772 1.02154 2.04309 4.08618 8.17236 16.3447 32.6894 65.3788 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.142 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.69 x 7.137 at -1.597 degrees (North through East) ! Clean map min=-0.0021943 max=0.14241 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1500-2358_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:02:01 2019