! Started logfile: J1459+4442_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:15:37 2019 obs J1459+4442_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1459+4442_S_2017_01_16_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.765608 visibilities/baseline/integration-bin. ! Found source: J1459+4442 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 11576 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1459+4442_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 296 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.880629Jy sigma=0.007935 ! Fit after self-cal, rms=0.875021Jy sigma=0.007899 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.993 mas, bmaj=5.995 mas, bpa=22.95 degrees ! Estimated noise=1207.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101436 Jy ! Component: 100 - total flux cleaned = 0.123578 Jy ! Total flux subtracted in 100 components = 0.123578 Jy ! Clean residual min=-0.005065 max=0.006216 Jy/beam ! Clean residual mean=-0.000007 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.123578 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.123578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090672Jy sigma=0.000676 ! Fit after self-cal, rms=0.090658Jy sigma=0.000676 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.782 mas, bmaj=6.73 mas, bpa=17.02 degrees ! Estimated noise=788.848 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00508078 Jy ! Component: 100 - total flux cleaned = 0.00719602 Jy ! Component: 150 - total flux cleaned = 0.00793903 Jy ! Component: 200 - total flux cleaned = 0.00803686 Jy ! Total flux subtracted in 200 components = 0.00803686 Jy ! Clean residual min=-0.003058 max=0.002860 Jy/beam ! Clean residual mean=-0.000014 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.131614 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.131614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090390Jy sigma=0.000673 ! Fit after self-cal, rms=0.090391Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.93 HN 0.94 KP 1.01 ! LA 1.04 MK 1.00* NL 0.95 OV 1.00 ! PT 0.97 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.95 KP 1.01 ! LA 0.98 MK 1.00* NL 1.02 OV 1.03 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.01 HN 0.95 KP 0.97 ! LA 0.97 MK 1.00* NL 1.01 OV 0.93 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.05 HN 0.95 KP 1.00* ! LA 1.08 MK 1.00* NL 1.00* OV 0.97 ! PT 0.97 SC 0.94 ! ! ! Fit before self-cal, rms=0.090391Jy sigma=0.000673 ! Fit after self-cal, rms=0.089274Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.768 mas, bmaj=6.696 mas, bpa=15.92 degrees ! Estimated noise=787.911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000725132 Jy ! Component: 100 - total flux cleaned = 0.000912988 Jy ! Component: 150 - total flux cleaned = 0.000946303 Jy ! Component: 200 - total flux cleaned = 0.000946519 Jy ! Total flux subtracted in 200 components = 0.000946519 Jy ! Clean residual min=-0.002757 max=0.002235 Jy/beam ! Clean residual mean=-0.000016 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.132561 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.132561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089233Jy sigma=0.000668 ! Fit after self-cal, rms=0.089256Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089256Jy sigma=0.000668 ! Fit after self-cal, rms=0.087863Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.753 mas, bmaj=6.685 mas, bpa=15.56 degrees ! Estimated noise=788.276 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000585597 Jy ! Component: 100 - total flux cleaned = 0.000636078 Jy ! Component: 150 - total flux cleaned = 0.000623726 Jy ! Component: 200 - total flux cleaned = 0.000601741 Jy ! Total flux subtracted in 200 components = 0.000601741 Jy ! Clean residual min=-0.001926 max=0.002009 Jy/beam ! Clean residual mean=-0.000011 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.133163 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.133163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087849Jy sigma=0.000664 ! Fit after self-cal, rms=0.087866Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.31886e-05 Jy ! Component: 100 - total flux cleaned = 2.18829e-05 Jy ! Component: 150 - total flux cleaned = 4.9175e-06 Jy ! Component: 200 - total flux cleaned = 4.98334e-06 Jy ! Total flux subtracted in 200 components = 4.98334e-06 Jy ! Clean residual min=-0.001958 max=0.002010 Jy/beam ! Clean residual mean=-0.000011 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.133168 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.133168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087861Jy sigma=0.000664 ! Fit after self-cal, rms=0.087861Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087861Jy sigma=0.000664 ! Fit after self-cal, rms=0.087741Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.743 mas, bmaj=6.682 mas, bpa=15.46 degrees ! Estimated noise=788.573 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000445535 Jy ! Component: 100 - total flux cleaned = 0.000478941 Jy ! Component: 150 - total flux cleaned = 0.000487481 Jy ! Component: 200 - total flux cleaned = 0.000487642 Jy ! Total flux subtracted in 200 components = 0.000487642 Jy ! Clean residual min=-0.001928 max=0.002021 Jy/beam ! Clean residual mean=-0.000011 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.133655 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 39 components and 0.133655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087736Jy sigma=0.000664 ! Fit after self-cal, rms=0.087736Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.22201e-05 Jy ! Component: 100 - total flux cleaned = 1.57827e-05 Jy ! Component: 150 - total flux cleaned = 9.67613e-06 Jy ! Component: 200 - total flux cleaned = 9.91265e-06 Jy ! Total flux subtracted in 200 components = 9.91265e-06 Jy ! Clean residual min=-0.001935 max=0.002026 Jy/beam ! Clean residual mean=-0.000011 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.133665 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.133665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087734Jy sigma=0.000664 ! Fit after self-cal, rms=0.087734Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087734Jy sigma=0.000664 ! Fit after self-cal, rms=0.087695Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.298 mas, bmaj=9.328 mas, bpa=-4.953 degrees ! Estimated noise=911.268 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000255959 Jy ! Component: 100 - total flux cleaned = 0.000318657 Jy ! Component: 150 - total flux cleaned = 0.000358219 Jy ! Component: 200 - total flux cleaned = 0.000374053 Jy ! Total flux subtracted in 200 components = 0.000374053 Jy ! Clean residual min=-0.002154 max=0.001864 Jy/beam ! Clean residual mean=-0.000018 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.134039 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.134039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087696Jy sigma=0.000664 ! Fit after self-cal, rms=0.087696Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.94667e-06 Jy ! Component: 100 - total flux cleaned = 2.47679e-05 Jy ! Component: 150 - total flux cleaned = 2.90786e-05 Jy ! Component: 200 - total flux cleaned = 3.73282e-05 Jy ! Total flux subtracted in 200 components = 3.73282e-05 Jy ! Clean residual min=-0.002154 max=0.001867 Jy/beam ! Clean residual mean=-0.000018 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.134077 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 49 components and 0.134077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087697Jy sigma=0.000664 ! Fit after self-cal, rms=0.087698Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.738 mas, bmaj=6.679 mas, bpa=15.38 degrees ! Estimated noise=788.941 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.738 x 6.679 at 15.38 degrees (North through East) ! Clean map min=-0.0019022 max=0.129 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.969 mas, bmaj=5.93 mas, bpa=21.43 degrees ! Estimated noise=1200.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100811 Jy ! Component: 100 - total flux cleaned = 0.1229 Jy ! Component: 150 - total flux cleaned = 0.128881 Jy ! Component: 200 - total flux cleaned = 0.131583 Jy ! Total flux subtracted in 200 components = 0.131583 Jy ! Clean residual min=-0.003788 max=0.003319 Jy/beam ! Clean residual mean=-0.000005 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.131583 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.131583 Jy ! Inverting map and beam ! Estimated beam: bmin=4.738 mas, bmaj=6.679 mas, bpa=15.38 degrees ! Estimated noise=788.941 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166106 Jy ! Component: 100 - total flux cleaned = 0.00201956 Jy ! Component: 150 - total flux cleaned = 0.00202126 Jy ! Component: 200 - total flux cleaned = 0.00204476 Jy ! Total flux subtracted in 200 components = 0.00204476 Jy ! Clean residual min=-0.001937 max=0.002066 Jy/beam ! Clean residual mean=-0.000011 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.133627 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 0.133627 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.298 mas, bmaj=9.328 mas, bpa=-4.953 degrees ! Estimated noise=911.268 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121876 Jy ! Component: 100 - total flux cleaned = 0.000159505 Jy ! Component: 150 - total flux cleaned = 0.00020679 Jy ! Component: 200 - total flux cleaned = 0.00022238 Jy ! Total flux subtracted in 200 components = 0.00022238 Jy ! Clean residual min=-0.002107 max=0.001872 Jy/beam ! Clean residual mean=-0.000018 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.13385 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.11834e-06 Jy ! Component: 100 - total flux cleaned = 1.37896e-05 Jy ! Component: 150 - total flux cleaned = 2.02729e-05 Jy ! Component: 200 - total flux cleaned = 2.64016e-05 Jy ! Total flux subtracted in 200 components = 2.64016e-05 Jy ! Clean residual min=-0.002117 max=0.001862 Jy/beam ! Clean residual mean=-0.000018 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.133876 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.133876 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.738 mas, bmaj=6.679 mas, bpa=15.38 degrees ! Estimated noise=788.941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000139843 Jy ! Component: 100 - total flux cleaned = -0.00015716 Jy ! Component: 150 - total flux cleaned = -0.000142812 Jy ! Component: 200 - total flux cleaned = -0.000142061 Jy ! Total flux subtracted in 200 components = -0.000142061 Jy ! Clean residual min=-0.001939 max=0.002024 Jy/beam ! Clean residual mean=-0.000010 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.133734 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.133734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087710Jy sigma=0.000664 ! Fit after self-cal, rms=0.087706Jy sigma=0.000664 wmodel J1459+4442_S_2017_01_16_pus_map.mod ! Writing 49 model components to file: J1459+4442_S_2017_01_16_pus_map.mod wobs J1459+4442_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1459+4442_S_2017_01_16_pus_uvs.fits wwins J1459+4442_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J1459+4442_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00010013 Jy ! Component: 100 - total flux cleaned = -0.000298897 Jy ! Component: 150 - total flux cleaned = -0.000484059 Jy ! Component: 200 - total flux cleaned = -0.000751643 Jy ! Component: 250 - total flux cleaned = -0.00101081 Jy ! Component: 300 - total flux cleaned = -0.00120691 Jy ! Component: 350 - total flux cleaned = -0.00142498 Jy ! Component: 400 - total flux cleaned = -0.00158473 Jy ! Component: 450 - total flux cleaned = -0.00168942 Jy ! Component: 500 - total flux cleaned = -0.00181717 Jy ! Component: 550 - total flux cleaned = -0.00196715 Jy ! Component: 600 - total flux cleaned = -0.00206525 Jy ! Component: 650 - total flux cleaned = -0.00225831 Jy ! Component: 700 - total flux cleaned = -0.00244763 Jy ! Component: 750 - total flux cleaned = -0.00263404 Jy ! Component: 800 - total flux cleaned = -0.00284031 Jy ! Component: 850 - total flux cleaned = -0.00304324 Jy ! Component: 900 - total flux cleaned = -0.00315425 Jy ! Component: 950 - total flux cleaned = -0.00332965 Jy ! Component: 1000 - total flux cleaned = -0.00350238 Jy ! Component: 1050 - total flux cleaned = -0.00365148 Jy ! Component: 1100 - total flux cleaned = -0.00375658 Jy ! Component: 1150 - total flux cleaned = -0.00394322 Jy ! Component: 1200 - total flux cleaned = -0.00408663 Jy ! Component: 1250 - total flux cleaned = -0.00426829 Jy ! Component: 1300 - total flux cleaned = -0.0043283 Jy ! Component: 1350 - total flux cleaned = -0.00448588 Jy ! Component: 1400 - total flux cleaned = -0.0046028 Jy ! Component: 1450 - total flux cleaned = -0.00475654 Jy ! Component: 1500 - total flux cleaned = -0.00485148 Jy ! Component: 1550 - total flux cleaned = -0.00498286 Jy ! Component: 1600 - total flux cleaned = -0.00513122 Jy ! Component: 1650 - total flux cleaned = -0.00520476 Jy ! Component: 1700 - total flux cleaned = -0.00525935 Jy ! Component: 1750 - total flux cleaned = -0.00545688 Jy ! Component: 1800 - total flux cleaned = -0.00554559 Jy ! Component: 1850 - total flux cleaned = -0.00558077 Jy ! Component: 1900 - total flux cleaned = -0.00570221 Jy ! Component: 1950 - total flux cleaned = -0.00582257 Jy ! Component: 2000 - total flux cleaned = -0.00594142 Jy ! Component: 2050 - total flux cleaned = -0.00599205 Jy ! Component: 2100 - total flux cleaned = -0.00607538 Jy ! Component: 2150 - total flux cleaned = -0.00619101 Jy ! Component: 2200 - total flux cleaned = -0.00625609 Jy ! Component: 2250 - total flux cleaned = -0.00627234 Jy ! Component: 2300 - total flux cleaned = -0.0063367 Jy ! Component: 2350 - total flux cleaned = -0.00635267 Jy ! Component: 2400 - total flux cleaned = -0.00644737 Jy ! Component: 2450 - total flux cleaned = -0.00652541 Jy ! Component: 2500 - total flux cleaned = -0.00657198 Jy ! Component: 2550 - total flux cleaned = -0.00657204 Jy ! Component: 2600 - total flux cleaned = -0.00670898 Jy ! Component: 2650 - total flux cleaned = -0.00673917 Jy ! Component: 2700 - total flux cleaned = -0.00679916 Jy ! Component: 2750 - total flux cleaned = -0.0068291 Jy ! Component: 2800 - total flux cleaned = -0.00691743 Jy ! Component: 2850 - total flux cleaned = -0.00701982 Jy ! Component: 2900 - total flux cleaned = -0.00703445 Jy ! Component: 2950 - total flux cleaned = -0.00714931 Jy ! Component: 3000 - total flux cleaned = -0.00723474 Jy ! Component: 3050 - total flux cleaned = -0.00724874 Jy ! Component: 3100 - total flux cleaned = -0.00727671 Jy ! Component: 3150 - total flux cleaned = -0.0073744 Jy ! Component: 3200 - total flux cleaned = -0.00742951 Jy ! Component: 3250 - total flux cleaned = -0.00749809 Jy ! Component: 3300 - total flux cleaned = -0.00751171 Jy ! Component: 3350 - total flux cleaned = -0.00759267 Jy ! Component: 3400 - total flux cleaned = -0.00760601 Jy ! Component: 3450 - total flux cleaned = -0.00767261 Jy ! Component: 3500 - total flux cleaned = -0.00768562 Jy ! Component: 3550 - total flux cleaned = -0.00771182 Jy ! Component: 3600 - total flux cleaned = -0.00777684 Jy ! Component: 3650 - total flux cleaned = -0.00775105 Jy ! Component: 3700 - total flux cleaned = -0.00778961 Jy ! Component: 3750 - total flux cleaned = -0.0078279 Jy ! Component: 3800 - total flux cleaned = -0.00784061 Jy ! Component: 3850 - total flux cleaned = -0.00787854 Jy ! Component: 3900 - total flux cleaned = -0.00794115 Jy ! Component: 3950 - total flux cleaned = -0.00796588 Jy ! Component: 4000 - total flux cleaned = -0.00797818 Jy ! Component: 4050 - total flux cleaned = -0.00801497 Jy ! Total flux subtracted in 4096 components = -0.00805157 Jy ! Clean residual min=-0.000830 max=0.000794 Jy/beam ! Clean residual mean=0.000000 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.125682 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 320 components and 0.125682 Jy ![Exited script file: muppet] wmap "J1459+4442_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.738 x 6.679 at 15.38 degrees (North through East) ! Clean map min=-0.001644 max=0.12885 Jy/beam ! Writing clean map to FITS file: J1459+4442_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.128852 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000230601 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.536899 0.536899 1.0738 2.14759 4.29519 8.59038 17.1808 34.3615 68.723 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.128 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.738 x 6.679 at 15.38 degrees (North through East) ! Clean map min=-0.001644 max=0.12885 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1459+4442_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:15:42 2019