! Started logfile: J1458+0416_S_2017_08_05_pus_uvs.log on Thu May 9 19:31:57 2019 obs J1458+0416_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1458+0416_S_2017_08_05_pus_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.733333 visibilities/baseline/integration-bin. ! Found source: J1458+0416 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 3432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1458+0416_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 184 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.864152Jy sigma=0.007748 ! Fit after self-cal, rms=0.857767Jy sigma=0.007693 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=7.854 mas, bpa=-6.7 degrees ! Estimated noise=1912.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109037 Jy ! Component: 100 - total flux cleaned = 0.13539 Jy ! Total flux subtracted in 100 components = 0.13539 Jy ! Clean residual min=-0.007648 max=0.010604 Jy/beam ! Clean residual mean=0.000043 rms=0.002119 Jy/beam ! Combined flux in latest and established models = 0.13539 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.13539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088046Jy sigma=0.000720 ! Fit after self-cal, rms=0.088044Jy sigma=0.000720 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.578 mas, bmaj=8.944 mas, bpa=-5.981 degrees ! Estimated noise=1556.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146795 Jy ! Component: 100 - total flux cleaned = 0.0224916 Jy ! Component: 150 - total flux cleaned = 0.0270556 Jy ! Component: 200 - total flux cleaned = 0.0298739 Jy ! Total flux subtracted in 200 components = 0.0298739 Jy ! Clean residual min=-0.006633 max=0.006694 Jy/beam ! Clean residual mean=0.000025 rms=0.001635 Jy/beam ! Combined flux in latest and established models = 0.165264 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 37 components and 0.165264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085243Jy sigma=0.000700 ! Fit after self-cal, rms=0.085252Jy sigma=0.000699 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.97 KP 1.01 ! LA 1.01 MK 1.00 NL 0.88 OV 1.05 ! PT 0.99 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.08 HN 1.05 KP 1.03 ! LA 0.90 MK 1.07 NL 1.01 OV 1.03 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.09 HN 1.04 KP 0.89 ! LA 0.78 MK 1.04 NL 1.16 OV 1.01 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.25 HN 1.08 KP 1.00* ! LA 1.00* MK 1.01 NL 1.00* OV 1.00* ! PT 0.88 SC 1.00* ! ! ! Fit before self-cal, rms=0.085252Jy sigma=0.000699 ! Fit after self-cal, rms=0.082236Jy sigma=0.000685 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=8.935 mas, bpa=-5.325 degrees ! Estimated noise=1575.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000292215 Jy ! Component: 100 - total flux cleaned = -0.000654075 Jy ! Component: 150 - total flux cleaned = -0.000841026 Jy ! Component: 200 - total flux cleaned = -0.00100684 Jy ! Total flux subtracted in 200 components = -0.00100684 Jy ! Clean residual min=-0.005277 max=0.005500 Jy/beam ! Clean residual mean=-0.000003 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.164257 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.164257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082187Jy sigma=0.000684 ! Fit after self-cal, rms=0.082174Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082174Jy sigma=0.000684 ! Fit after self-cal, rms=0.082122Jy sigma=0.000677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.601 mas, bmaj=8.978 mas, bpa=-5.533 degrees ! Estimated noise=1575.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000163789 Jy ! Component: 100 - total flux cleaned = -7.29315e-05 Jy ! Component: 150 - total flux cleaned = -4.48923e-05 Jy ! Component: 200 - total flux cleaned = -7.01774e-05 Jy ! Total flux subtracted in 200 components = -7.01774e-05 Jy ! Clean residual min=-0.004571 max=0.004691 Jy/beam ! Clean residual mean=-0.000006 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.164187 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.164187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082088Jy sigma=0.000677 ! Fit after self-cal, rms=0.082121Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.08986e-05 Jy ! Component: 100 - total flux cleaned = -1.33325e-05 Jy ! Component: 150 - total flux cleaned = 9.1279e-06 Jy ! Component: 200 - total flux cleaned = -1.12817e-05 Jy ! Total flux subtracted in 200 components = -1.12817e-05 Jy ! Clean residual min=-0.004561 max=0.004751 Jy/beam ! Clean residual mean=-0.000006 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.164175 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 0.164175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082105Jy sigma=0.000677 ! Fit after self-cal, rms=0.082101Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082101Jy sigma=0.000677 ! Fit after self-cal, rms=0.082568Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.612 mas, bmaj=9.008 mas, bpa=-5.656 degrees ! Estimated noise=1581.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.94679e-05 Jy ! Component: 100 - total flux cleaned = -0.000127569 Jy ! Component: 150 - total flux cleaned = -0.000146044 Jy ! Component: 200 - total flux cleaned = -0.000201747 Jy ! Total flux subtracted in 200 components = -0.000201747 Jy ! Clean residual min=-0.004499 max=0.004699 Jy/beam ! Clean residual mean=-0.000006 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.163974 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 0.163974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082552Jy sigma=0.000677 ! Fit after self-cal, rms=0.082555Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110043 Jy ! Component: 100 - total flux cleaned = -0.000129201 Jy ! Component: 150 - total flux cleaned = -0.000162921 Jy ! Component: 200 - total flux cleaned = -0.000194022 Jy ! Total flux subtracted in 200 components = -0.000194022 Jy ! Clean residual min=-0.004477 max=0.004730 Jy/beam ! Clean residual mean=-0.000006 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.16378 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.16378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082546Jy sigma=0.000677 ! Fit after self-cal, rms=0.082544Jy sigma=0.000677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082544Jy sigma=0.000677 ! Fit after self-cal, rms=0.082927Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.119 mas, bmaj=12.98 mas, bpa=-7.272 degrees ! Estimated noise=1853.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177265 Jy ! Component: 100 - total flux cleaned = 0.000317018 Jy ! Component: 150 - total flux cleaned = 0.000423372 Jy ! Component: 200 - total flux cleaned = 0.000441109 Jy ! Total flux subtracted in 200 components = 0.000441109 Jy ! Clean residual min=-0.004863 max=0.004377 Jy/beam ! Clean residual mean=-0.000011 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 0.164221 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 69 components and 0.164221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082928Jy sigma=0.000677 ! Fit after self-cal, rms=0.082920Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.49083e-05 Jy ! Component: 100 - total flux cleaned = -1.53154e-05 Jy ! Component: 150 - total flux cleaned = 2.15982e-06 Jy ! Component: 200 - total flux cleaned = 1.9191e-06 Jy ! Total flux subtracted in 200 components = 1.9191e-06 Jy ! Clean residual min=-0.004883 max=0.004295 Jy/beam ! Clean residual mean=-0.000010 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.164223 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 0.164223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082926Jy sigma=0.000677 ! Fit after self-cal, rms=0.082914Jy sigma=0.000677 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=9.036 mas, bpa=-5.748 degrees ! Estimated noise=1586.32 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.622 x 9.036 at -5.748 degrees (North through East) ! Clean map min=-0.0043224 max=0.14137 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.922 mas, bmaj=7.917 mas, bpa=-6.268 degrees ! Estimated noise=1957.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111015 Jy ! Component: 100 - total flux cleaned = 0.137877 Jy ! Component: 150 - total flux cleaned = 0.14846 Jy ! Component: 200 - total flux cleaned = 0.153627 Jy ! Total flux subtracted in 200 components = 0.153627 Jy ! Clean residual min=-0.005321 max=0.005796 Jy/beam ! Clean residual mean=0.000002 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.153627 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.153627 Jy ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=9.036 mas, bpa=-5.748 degrees ! Estimated noise=1586.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00513043 Jy ! Component: 100 - total flux cleaned = 0.00784741 Jy ! Component: 150 - total flux cleaned = 0.00896911 Jy ! Component: 200 - total flux cleaned = 0.00957295 Jy ! Total flux subtracted in 200 components = 0.00957295 Jy ! Clean residual min=-0.005042 max=0.004761 Jy/beam ! Clean residual mean=-0.000005 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 0.163199 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 51 components and 0.163199 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.119 mas, bmaj=12.98 mas, bpa=-7.272 degrees ! Estimated noise=1853.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000844551 Jy ! Component: 100 - total flux cleaned = 0.000974419 Jy ! Component: 150 - total flux cleaned = 0.00108873 Jy ! Component: 200 - total flux cleaned = 0.00112391 Jy ! Total flux subtracted in 200 components = 0.00112391 Jy ! Clean residual min=-0.004692 max=0.004115 Jy/beam ! Clean residual mean=-0.000011 rms=0.001316 Jy/beam ! Combined flux in latest and established models = 0.164323 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.15579e-08 Jy ! Component: 100 - total flux cleaned = 1.17941e-06 Jy ! Component: 150 - total flux cleaned = 5.80852e-05 Jy ! Component: 200 - total flux cleaned = 0.000111433 Jy ! Total flux subtracted in 200 components = 0.000111433 Jy ! Clean residual min=-0.004652 max=0.004172 Jy/beam ! Clean residual mean=-0.000011 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.164435 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 79 components and 0.164435 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=9.036 mas, bpa=-5.748 degrees ! Estimated noise=1586.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000388188 Jy ! Component: 100 - total flux cleaned = 0.000544713 Jy ! Component: 150 - total flux cleaned = 0.000617298 Jy ! Component: 200 - total flux cleaned = 0.000684239 Jy ! Total flux subtracted in 200 components = 0.000684239 Jy ! Clean residual min=-0.004888 max=0.004610 Jy/beam ! Clean residual mean=-0.000008 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.165119 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 95 components and 0.165119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082772Jy sigma=0.000675 ! Fit after self-cal, rms=0.082733Jy sigma=0.000675 wmodel J1458+0416_S_2017_08_05_pus_map.mod ! Writing 95 model components to file: J1458+0416_S_2017_08_05_pus_map.mod wobs J1458+0416_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1458+0416_S_2017_08_05_pus_uvs.fits wwins J1458+0416_S_2017_08_05_pus_map.win ! wwins: Wrote 2 windows to J1458+0416_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123065 Jy ! Component: 100 - total flux cleaned = 0.000126603 Jy ! Component: 150 - total flux cleaned = 5.97843e-05 Jy ! Component: 200 - total flux cleaned = 0.000189666 Jy ! Component: 250 - total flux cleaned = 0.000500186 Jy ! Component: 300 - total flux cleaned = 0.000918188 Jy ! Component: 350 - total flux cleaned = 0.00144005 Jy ! Component: 400 - total flux cleaned = 0.00200475 Jy ! Component: 450 - total flux cleaned = 0.00277333 Jy ! Component: 500 - total flux cleaned = 0.00330666 Jy ! Component: 550 - total flux cleaned = 0.00367149 Jy ! Component: 600 - total flux cleaned = 0.00413107 Jy ! Component: 650 - total flux cleaned = 0.0044791 Jy ! Component: 700 - total flux cleaned = 0.00477128 Jy ! Component: 750 - total flux cleaned = 0.00501041 Jy ! Component: 800 - total flux cleaned = 0.00524411 Jy ! Component: 850 - total flux cleaned = 0.00533749 Jy ! Component: 900 - total flux cleaned = 0.00565273 Jy ! Component: 950 - total flux cleaned = 0.00578487 Jy ! Component: 1000 - total flux cleaned = 0.00595832 Jy ! Component: 1050 - total flux cleaned = 0.00604243 Jy ! Component: 1100 - total flux cleaned = 0.0061255 Jy ! Component: 1150 - total flux cleaned = 0.00616656 Jy ! Component: 1200 - total flux cleaned = 0.0063268 Jy ! Component: 1250 - total flux cleaned = 0.00624805 Jy ! Component: 1300 - total flux cleaned = 0.00636528 Jy ! Component: 1350 - total flux cleaned = 0.00636549 Jy ! Component: 1400 - total flux cleaned = 0.00647935 Jy ! Component: 1450 - total flux cleaned = 0.00644231 Jy ! Component: 1500 - total flux cleaned = 0.0064064 Jy ! Component: 1550 - total flux cleaned = 0.00644262 Jy ! Component: 1600 - total flux cleaned = 0.00644251 Jy ! Component: 1650 - total flux cleaned = 0.00651223 Jy ! Component: 1700 - total flux cleaned = 0.00640838 Jy ! Component: 1750 - total flux cleaned = 0.00654544 Jy ! Component: 1800 - total flux cleaned = 0.00657901 Jy ! Component: 1850 - total flux cleaned = 0.00661167 Jy ! Component: 1900 - total flux cleaned = 0.00651268 Jy ! Component: 1950 - total flux cleaned = 0.00664346 Jy ! Component: 2000 - total flux cleaned = 0.00657877 Jy ! Component: 2050 - total flux cleaned = 0.00661071 Jy ! Component: 2100 - total flux cleaned = 0.00667365 Jy ! Component: 2150 - total flux cleaned = 0.00673594 Jy ! Component: 2200 - total flux cleaned = 0.00676694 Jy ! Component: 2250 - total flux cleaned = 0.00676682 Jy ! Component: 2300 - total flux cleaned = 0.00676707 Jy ! Component: 2350 - total flux cleaned = 0.00676697 Jy ! Component: 2400 - total flux cleaned = 0.00679608 Jy ! Component: 2450 - total flux cleaned = 0.00676684 Jy ! Component: 2500 - total flux cleaned = 0.00670935 Jy ! Component: 2550 - total flux cleaned = 0.00673805 Jy ! Component: 2600 - total flux cleaned = 0.00673851 Jy ! Component: 2650 - total flux cleaned = 0.00685071 Jy ! Component: 2700 - total flux cleaned = 0.00679498 Jy ! Component: 2750 - total flux cleaned = 0.00676782 Jy ! Component: 2800 - total flux cleaned = 0.00674024 Jy ! Component: 2850 - total flux cleaned = 0.00671314 Jy ! Component: 2900 - total flux cleaned = 0.00668614 Jy ! Component: 2950 - total flux cleaned = 0.0066599 Jy ! Component: 3000 - total flux cleaned = 0.00663354 Jy ! Component: 3050 - total flux cleaned = 0.00660781 Jy ! Component: 3100 - total flux cleaned = 0.00658228 Jy ! Component: 3150 - total flux cleaned = 0.00653113 Jy ! Component: 3200 - total flux cleaned = 0.00655626 Jy ! Component: 3250 - total flux cleaned = 0.00648064 Jy ! Component: 3300 - total flux cleaned = 0.00643064 Jy ! Component: 3350 - total flux cleaned = 0.00645522 Jy ! Component: 3400 - total flux cleaned = 0.00635694 Jy ! Component: 3450 - total flux cleaned = 0.006284 Jy ! Component: 3500 - total flux cleaned = 0.00628413 Jy ! Component: 3550 - total flux cleaned = 0.00637994 Jy ! Component: 3600 - total flux cleaned = 0.00626059 Jy ! Component: 3650 - total flux cleaned = 0.00621351 Jy ! Component: 3700 - total flux cleaned = 0.00616661 Jy ! Component: 3750 - total flux cleaned = 0.00614317 Jy ! Component: 3800 - total flux cleaned = 0.00614305 Jy ! Component: 3850 - total flux cleaned = 0.00616575 Jy ! Component: 3900 - total flux cleaned = 0.00602896 Jy ! Component: 3950 - total flux cleaned = 0.00605166 Jy ! Component: 4000 - total flux cleaned = 0.0060516 Jy ! Component: 4050 - total flux cleaned = 0.00598452 Jy ! Total flux subtracted in 4096 components = 0.00596232 Jy ! Clean residual min=-0.001336 max=0.001162 Jy/beam ! Clean residual mean=-0.000002 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.171081 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 366 components and 0.171081 Jy ![Exited script file: muppet] wmap "J1458+0416_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.622 x 9.036 at -5.748 degrees (North through East) ! Clean map min=-0.002746 max=0.14263 Jy/beam ! Writing clean map to FITS file: J1458+0416_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.142628 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000390258 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.820861 0.820861 1.64172 3.28345 6.56689 13.1338 26.2676 52.5351 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.142 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.622 x 9.036 at -5.748 degrees (North through East) ! Clean map min=-0.002746 max=0.14263 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1458+0416_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:32:02 2019