! Started logfile: J1458+0416_S_2017_02_19_pus_uvs.log on Sat May 4 18:53:05 2019 obs J1458+0416_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1458+0416_S_2017_02_19_pus_uva.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.624444 visibilities/baseline/integration-bin. ! Found source: J1458+0416 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 2248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1458+0416_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.841818Jy sigma=0.007389 ! Fit after self-cal, rms=0.838172Jy sigma=0.007358 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=6.721 mas, bpa=-1.179 degrees ! Estimated noise=2098.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124518 Jy ! Component: 100 - total flux cleaned = 0.153696 Jy ! Total flux subtracted in 100 components = 0.153696 Jy ! Clean residual min=-0.007967 max=0.011221 Jy/beam ! Clean residual mean=0.000017 rms=0.002183 Jy/beam ! Combined flux in latest and established models = 0.153696 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.153696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086372Jy sigma=0.000705 ! Fit after self-cal, rms=0.086358Jy sigma=0.000705 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=7.206 mas, bpa=1.33 degrees ! Estimated noise=1882.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156503 Jy ! Component: 100 - total flux cleaned = 0.0232621 Jy ! Component: 150 - total flux cleaned = 0.0275569 Jy ! Component: 200 - total flux cleaned = 0.0301235 Jy ! Total flux subtracted in 200 components = 0.0301235 Jy ! Clean residual min=-0.007204 max=0.007146 Jy/beam ! Clean residual mean=0.000011 rms=0.001608 Jy/beam ! Combined flux in latest and established models = 0.18382 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 41 components and 0.18382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083133Jy sigma=0.000684 ! Fit after self-cal, rms=0.083105Jy sigma=0.000684 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 0.98 KP 1.04 ! LA 1.02 MK 1.03 NL 0.85 OV 1.05 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 1.05 KP 0.98 ! LA 0.96 MK 1.02 NL 1.06 OV 1.03 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.98 HN 1.03 KP 0.91 ! LA 0.80 MK 0.98 NL 1.17 OV 1.04 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.06 HN 0.93 KP 1.00* ! LA 0.85 MK 1.29 NL 1.00* OV 1.11 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.083105Jy sigma=0.000684 ! Fit after self-cal, rms=0.079337Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=7.271 mas, bpa=1.733 degrees ! Estimated noise=1888.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.001052 Jy ! Component: 100 - total flux cleaned = -0.00137018 Jy ! Component: 150 - total flux cleaned = -0.00149286 Jy ! Component: 200 - total flux cleaned = -0.00154716 Jy ! Total flux subtracted in 200 components = -0.00154716 Jy ! Clean residual min=-0.005300 max=0.005015 Jy/beam ! Clean residual mean=0.000000 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 0.182273 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.182273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079285Jy sigma=0.000664 ! Fit after self-cal, rms=0.079256Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079256Jy sigma=0.000663 ! Fit after self-cal, rms=0.078677Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.208 mas, bmaj=7.279 mas, bpa=1.971 degrees ! Estimated noise=1885.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000790368 Jy ! Component: 100 - total flux cleaned = -0.00100483 Jy ! Component: 150 - total flux cleaned = -0.00105926 Jy ! Component: 200 - total flux cleaned = -0.00110866 Jy ! Total flux subtracted in 200 components = -0.00110866 Jy ! Clean residual min=-0.004996 max=0.004680 Jy/beam ! Clean residual mean=0.000006 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.181164 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.181164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078651Jy sigma=0.000655 ! Fit after self-cal, rms=0.078680Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.11852e-05 Jy ! Component: 100 - total flux cleaned = -6.44733e-05 Jy ! Component: 150 - total flux cleaned = -8.59605e-05 Jy ! Component: 200 - total flux cleaned = -0.00010809 Jy ! Total flux subtracted in 200 components = -0.00010809 Jy ! Clean residual min=-0.004987 max=0.004613 Jy/beam ! Clean residual mean=0.000006 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.181056 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.181056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078666Jy sigma=0.000654 ! Fit after self-cal, rms=0.078665Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078665Jy sigma=0.000654 ! Fit after self-cal, rms=0.078566Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=7.285 mas, bpa=2.108 degrees ! Estimated noise=1882.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000826816 Jy ! Component: 100 - total flux cleaned = -0.000973458 Jy ! Component: 150 - total flux cleaned = -0.00101565 Jy ! Component: 200 - total flux cleaned = -0.00105635 Jy ! Total flux subtracted in 200 components = -0.00105635 Jy ! Clean residual min=-0.004969 max=0.004568 Jy/beam ! Clean residual mean=0.000006 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.18 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.18 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078548Jy sigma=0.000654 ! Fit after self-cal, rms=0.078547Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.64452e-05 Jy ! Component: 100 - total flux cleaned = -3.74007e-05 Jy ! Component: 150 - total flux cleaned = -7.58875e-05 Jy ! Component: 200 - total flux cleaned = -7.53311e-05 Jy ! Total flux subtracted in 200 components = -7.53311e-05 Jy ! Clean residual min=-0.004965 max=0.004535 Jy/beam ! Clean residual mean=0.000007 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.179924 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 63 components and 0.179924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078538Jy sigma=0.000654 ! Fit after self-cal, rms=0.078538Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078538Jy sigma=0.000654 ! Fit after self-cal, rms=0.078451Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.146 mas, bmaj=10.69 mas, bpa=3.927 degrees ! Estimated noise=2420.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165826 Jy ! Component: 100 - total flux cleaned = -0.000414802 Jy ! Component: 150 - total flux cleaned = -0.00060559 Jy ! Component: 200 - total flux cleaned = -0.000726918 Jy ! Total flux subtracted in 200 components = -0.000726918 Jy ! Clean residual min=-0.005080 max=0.004118 Jy/beam ! Clean residual mean=0.000015 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.179197 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 68 components and 0.179197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078471Jy sigma=0.000654 ! Fit after self-cal, rms=0.078460Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123841 Jy ! Component: 100 - total flux cleaned = 3.68532e-05 Jy ! Component: 150 - total flux cleaned = -5.69187e-05 Jy ! Component: 200 - total flux cleaned = -0.000118404 Jy ! Total flux subtracted in 200 components = -0.000118404 Jy ! Clean residual min=-0.005039 max=0.003939 Jy/beam ! Clean residual mean=0.000015 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.179079 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 73 components and 0.179079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078488Jy sigma=0.000655 ! Fit after self-cal, rms=0.078481Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.222 mas, bmaj=7.293 mas, bpa=2.222 degrees ! Estimated noise=1879.85 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.222 x 7.293 at 2.222 degrees (North through East) ! Clean map min=-0.0046359 max=0.16083 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.811 mas, bmaj=6.773 mas, bpa=-0.2224 degrees ! Estimated noise=2118.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125576 Jy ! Component: 100 - total flux cleaned = 0.155819 Jy ! Component: 150 - total flux cleaned = 0.167883 Jy ! Component: 200 - total flux cleaned = 0.173535 Jy ! Total flux subtracted in 200 components = 0.173535 Jy ! Clean residual min=-0.006003 max=0.006143 Jy/beam ! Clean residual mean=0.000003 rms=0.001363 Jy/beam ! Combined flux in latest and established models = 0.173535 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.173535 Jy ! Inverting map and beam ! Estimated beam: bmin=3.222 mas, bmaj=7.293 mas, bpa=2.222 degrees ! Estimated noise=1879.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00458392 Jy ! Component: 100 - total flux cleaned = 0.00588628 Jy ! Component: 150 - total flux cleaned = 0.00684833 Jy ! Component: 200 - total flux cleaned = 0.00705738 Jy ! Total flux subtracted in 200 components = 0.00705738 Jy ! Clean residual min=-0.004905 max=0.004298 Jy/beam ! Clean residual mean=0.000006 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.180592 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 40 components and 0.180592 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.146 mas, bmaj=10.69 mas, bpa=3.927 degrees ! Estimated noise=2420.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118728 Jy ! Component: 100 - total flux cleaned = -0.00159356 Jy ! Component: 150 - total flux cleaned = -0.0018781 Jy ! Component: 200 - total flux cleaned = -0.00211659 Jy ! Total flux subtracted in 200 components = -0.00211659 Jy ! Clean residual min=-0.004984 max=0.003974 Jy/beam ! Clean residual mean=0.000014 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 0.178476 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000169956 Jy ! Component: 100 - total flux cleaned = -0.000372562 Jy ! Component: 150 - total flux cleaned = -0.000475065 Jy ! Component: 200 - total flux cleaned = -0.000588595 Jy ! Total flux subtracted in 200 components = -0.000588595 Jy ! Clean residual min=-0.004836 max=0.003936 Jy/beam ! Clean residual mean=0.000013 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.177887 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 71 components and 0.177887 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.222 mas, bmaj=7.293 mas, bpa=2.222 degrees ! Estimated noise=1879.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109462 Jy ! Component: 100 - total flux cleaned = 0.00113772 Jy ! Component: 150 - total flux cleaned = 0.00121095 Jy ! Component: 200 - total flux cleaned = 0.00131206 Jy ! Total flux subtracted in 200 components = 0.00131206 Jy ! Clean residual min=-0.004504 max=0.003985 Jy/beam ! Clean residual mean=0.000005 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.179199 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 88 components and 0.179199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078294Jy sigma=0.000653 ! Fit after self-cal, rms=0.078279Jy sigma=0.000653 wmodel J1458+0416_S_2017_02_19_pus_map.mod ! Writing 88 model components to file: J1458+0416_S_2017_02_19_pus_map.mod wobs J1458+0416_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1458+0416_S_2017_02_19_pus_uvs.fits wwins J1458+0416_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J1458+0416_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00153063 Jy ! Component: 100 - total flux cleaned = -0.00267839 Jy ! Component: 150 - total flux cleaned = -0.00341687 Jy ! Component: 200 - total flux cleaned = -0.00418246 Jy ! Component: 250 - total flux cleaned = -0.0049755 Jy ! Component: 300 - total flux cleaned = -0.00556306 Jy ! Component: 350 - total flux cleaned = -0.0060177 Jy ! Component: 400 - total flux cleaned = -0.00640226 Jy ! Component: 450 - total flux cleaned = -0.0067752 Jy ! Component: 500 - total flux cleaned = -0.00682669 Jy ! Component: 550 - total flux cleaned = -0.00682734 Jy ! Component: 600 - total flux cleaned = -0.00672969 Jy ! Component: 650 - total flux cleaned = -0.00668262 Jy ! Component: 700 - total flux cleaned = -0.00658936 Jy ! Component: 750 - total flux cleaned = -0.00668292 Jy ! Component: 800 - total flux cleaned = -0.00649957 Jy ! Component: 850 - total flux cleaned = -0.00645453 Jy ! Component: 900 - total flux cleaned = -0.00632248 Jy ! Component: 950 - total flux cleaned = -0.00632257 Jy ! Component: 1000 - total flux cleaned = -0.00636462 Jy ! Component: 1050 - total flux cleaned = -0.00636477 Jy ! Component: 1100 - total flux cleaned = -0.0064047 Jy ! Component: 1150 - total flux cleaned = -0.00624263 Jy ! Component: 1200 - total flux cleaned = -0.00616258 Jy ! Component: 1250 - total flux cleaned = -0.00616226 Jy ! Component: 1300 - total flux cleaned = -0.00608465 Jy ! Component: 1350 - total flux cleaned = -0.0060851 Jy ! Component: 1400 - total flux cleaned = -0.00589756 Jy ! Component: 1450 - total flux cleaned = -0.00597227 Jy ! Component: 1500 - total flux cleaned = -0.00600892 Jy ! Component: 1550 - total flux cleaned = -0.00586459 Jy ! Component: 1600 - total flux cleaned = -0.00590048 Jy ! Component: 1650 - total flux cleaned = -0.00576024 Jy ! Component: 1700 - total flux cleaned = -0.00576018 Jy ! Component: 1750 - total flux cleaned = -0.00575977 Jy ! Component: 1800 - total flux cleaned = -0.00565794 Jy ! Component: 1850 - total flux cleaned = -0.00562461 Jy ! Component: 1900 - total flux cleaned = -0.00555867 Jy ! Component: 1950 - total flux cleaned = -0.00552564 Jy ! Component: 2000 - total flux cleaned = -0.00552557 Jy ! Component: 2050 - total flux cleaned = -0.00539794 Jy ! Component: 2100 - total flux cleaned = -0.00527221 Jy ! Component: 2150 - total flux cleaned = -0.005272 Jy ! Component: 2200 - total flux cleaned = -0.00524092 Jy ! Component: 2250 - total flux cleaned = -0.00515003 Jy ! Component: 2300 - total flux cleaned = -0.00514986 Jy ! Component: 2350 - total flux cleaned = -0.00506045 Jy ! Component: 2400 - total flux cleaned = -0.00506102 Jy ! Component: 2450 - total flux cleaned = -0.00511939 Jy ! Component: 2500 - total flux cleaned = -0.00509038 Jy ! Component: 2550 - total flux cleaned = -0.00506171 Jy ! Component: 2600 - total flux cleaned = -0.00506126 Jy ! Component: 2650 - total flux cleaned = -0.00503253 Jy ! Component: 2700 - total flux cleaned = -0.00511584 Jy ! Component: 2750 - total flux cleaned = -0.00508812 Jy ! Component: 2800 - total flux cleaned = -0.00497946 Jy ! Component: 2850 - total flux cleaned = -0.00506074 Jy ! Component: 2900 - total flux cleaned = -0.00500727 Jy ! Component: 2950 - total flux cleaned = -0.00508683 Jy ! Component: 3000 - total flux cleaned = -0.00503401 Jy ! Component: 3050 - total flux cleaned = -0.00500809 Jy ! Component: 3100 - total flux cleaned = -0.00493088 Jy ! Component: 3150 - total flux cleaned = -0.00493108 Jy ! Component: 3200 - total flux cleaned = -0.00495592 Jy ! Component: 3250 - total flux cleaned = -0.0049304 Jy ! Component: 3300 - total flux cleaned = -0.00485552 Jy ! Component: 3350 - total flux cleaned = -0.00485586 Jy ! Component: 3400 - total flux cleaned = -0.00485603 Jy ! Component: 3450 - total flux cleaned = -0.00485586 Jy ! Component: 3500 - total flux cleaned = -0.0047833 Jy ! Component: 3550 - total flux cleaned = -0.00480742 Jy ! Component: 3600 - total flux cleaned = -0.00475989 Jy ! Component: 3650 - total flux cleaned = -0.00475978 Jy ! Component: 3700 - total flux cleaned = -0.00478337 Jy ! Component: 3750 - total flux cleaned = -0.00464284 Jy ! Component: 3800 - total flux cleaned = -0.00461954 Jy ! Component: 3850 - total flux cleaned = -0.00457368 Jy ! Component: 3900 - total flux cleaned = -0.00457363 Jy ! Component: 3950 - total flux cleaned = -0.00452781 Jy ! Component: 4000 - total flux cleaned = -0.00443714 Jy ! Component: 4050 - total flux cleaned = -0.00443706 Jy ! Total flux subtracted in 4096 components = -0.0043921 Jy ! Clean residual min=-0.001264 max=0.001330 Jy/beam ! Clean residual mean=0.000003 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.174807 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 369 components and 0.174807 Jy ![Exited script file: muppet] wmap "J1458+0416_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.222 x 7.293 at 2.222 degrees (North through East) ! Clean map min=-0.0030518 max=0.16087 Jy/beam ! Writing clean map to FITS file: J1458+0416_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.16087 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000392596 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.732138 0.732138 1.46428 2.92855 5.8571 11.7142 23.4284 46.8568 93.7136 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.16 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.222 x 7.293 at 2.222 degrees (North through East) ! Clean map min=-0.0030518 max=0.16087 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1458+0416_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:53:10 2019