! Started logfile: J1458+0416_S_2017_01_21_pus_uvs.log on Sun May 5 15:56:42 2019 obs J1458+0416_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1458+0416_S_2017_01_21_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.709402 visibilities/baseline/integration-bin. ! Found source: J1458+0416 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 1328 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1458+0416_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.907135Jy sigma=0.005887 ! Fit after self-cal, rms=0.868952Jy sigma=0.005605 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.63 mas, bmaj=6.413 mas, bpa=-10.19 degrees ! Estimated noise=3787.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114288 Jy ! Component: 100 - total flux cleaned = 0.140411 Jy ! Total flux subtracted in 100 components = 0.140411 Jy ! Clean residual min=-0.013347 max=0.015306 Jy/beam ! Clean residual mean=-0.000019 rms=0.003371 Jy/beam ! Combined flux in latest and established models = 0.140411 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.140411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124191Jy sigma=0.000673 ! Fit after self-cal, rms=0.124208Jy sigma=0.000673 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=6.963 mas, bpa=-8.25 degrees ! Estimated noise=3299.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00771208 Jy ! Component: 100 - total flux cleaned = 0.00824857 Jy ! Component: 150 - total flux cleaned = 0.00800029 Jy ! Component: 200 - total flux cleaned = 0.00779757 Jy ! Total flux subtracted in 200 components = 0.00779757 Jy ! Clean residual min=-0.011112 max=0.015475 Jy/beam ! Clean residual mean=-0.000029 rms=0.003164 Jy/beam ! Combined flux in latest and established models = 0.148209 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.148209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123826Jy sigma=0.000668 ! Fit after self-cal, rms=0.123850Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 0.90 LA 1.04 ! MK 0.99 NL 0.91 OV 1.45 PT 0.94 ! SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* HN 0.89 LA 0.98 ! MK 1.02 NL 0.92 OV 1.55 PT 0.94 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 1.05 LA 0.99 ! MK 1.03 NL 0.88 OV 1.82 PT 0.96 ! SC 1.05 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* HN 0.87 LA 0.78 ! MK 0.85 NL 1.00* OV 1.29 PT 1.01 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.123850Jy sigma=0.000668 ! Fit after self-cal, rms=0.147097Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.035 mas, bmaj=6.914 mas, bpa=-8.484 degrees ! Estimated noise=3280.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153527 Jy ! Component: 100 - total flux cleaned = 5.36683e-05 Jy ! Component: 150 - total flux cleaned = -0.000123825 Jy ! Component: 200 - total flux cleaned = -0.000359606 Jy ! Total flux subtracted in 200 components = -0.000359606 Jy ! Clean residual min=-0.009144 max=0.007431 Jy/beam ! Clean residual mean=0.000006 rms=0.001857 Jy/beam ! Combined flux in latest and established models = 0.147849 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 22 components and 0.147849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146858Jy sigma=0.000649 ! Fit after self-cal, rms=0.147531Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147531Jy sigma=0.000648 ! Fit after self-cal, rms=0.148574Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=6.891 mas, bpa=-8.42 degrees ! Estimated noise=3268.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.86476e-05 Jy ! Component: 100 - total flux cleaned = 2.34991e-05 Jy ! Component: 150 - total flux cleaned = -3.7064e-05 Jy ! Component: 200 - total flux cleaned = -3.76972e-05 Jy ! Total flux subtracted in 200 components = -3.76972e-05 Jy ! Clean residual min=-0.008739 max=0.007375 Jy/beam ! Clean residual mean=0.000006 rms=0.001797 Jy/beam ! Combined flux in latest and established models = 0.147811 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.147811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148420Jy sigma=0.000648 ! Fit after self-cal, rms=0.148449Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000501768 Jy ! Component: 100 - total flux cleaned = -0.000724874 Jy ! Component: 150 - total flux cleaned = -0.000725925 Jy ! Component: 200 - total flux cleaned = -0.000638693 Jy ! Total flux subtracted in 200 components = -0.000638693 Jy ! Clean residual min=-0.008433 max=0.007288 Jy/beam ! Clean residual mean=0.000004 rms=0.001778 Jy/beam ! Combined flux in latest and established models = 0.147173 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.147173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148363Jy sigma=0.000647 ! Fit after self-cal, rms=0.148377Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148377Jy sigma=0.000647 ! Fit after self-cal, rms=0.147927Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=6.874 mas, bpa=-8.336 degrees ! Estimated noise=3258.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156871 Jy ! Component: 100 - total flux cleaned = 0.000218672 Jy ! Component: 150 - total flux cleaned = 0.000308832 Jy ! Component: 200 - total flux cleaned = 0.000349746 Jy ! Total flux subtracted in 200 components = 0.000349746 Jy ! Clean residual min=-0.008112 max=0.007374 Jy/beam ! Clean residual mean=0.000004 rms=0.001743 Jy/beam ! Combined flux in latest and established models = 0.147522 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.147522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147851Jy sigma=0.000647 ! Fit after self-cal, rms=0.147861Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000332777 Jy ! Component: 100 - total flux cleaned = -0.000370763 Jy ! Component: 150 - total flux cleaned = -0.000299042 Jy ! Component: 200 - total flux cleaned = -0.00026703 Jy ! Total flux subtracted in 200 components = -0.00026703 Jy ! Clean residual min=-0.007964 max=0.007286 Jy/beam ! Clean residual mean=0.000004 rms=0.001734 Jy/beam ! Combined flux in latest and established models = 0.147255 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.147255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147818Jy sigma=0.000647 ! Fit after self-cal, rms=0.147828Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147828Jy sigma=0.000647 ! Fit after self-cal, rms=0.147959Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.907 mas, bmaj=11.15 mas, bpa=8.038 degrees ! Estimated noise=4340.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000780742 Jy ! Component: 100 - total flux cleaned = 0.000616708 Jy ! Component: 150 - total flux cleaned = 0.000614978 Jy ! Component: 200 - total flux cleaned = 0.000668418 Jy ! Total flux subtracted in 200 components = 0.000668418 Jy ! Clean residual min=-0.007775 max=0.007327 Jy/beam ! Clean residual mean=0.000012 rms=0.002163 Jy/beam ! Combined flux in latest and established models = 0.147924 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 40 components and 0.147924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147918Jy sigma=0.000647 ! Fit after self-cal, rms=0.147930Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.6092e-06 Jy ! Component: 100 - total flux cleaned = -6.9851e-05 Jy ! Component: 150 - total flux cleaned = -7.3852e-05 Jy ! Component: 200 - total flux cleaned = -2.84627e-05 Jy ! Total flux subtracted in 200 components = -2.84627e-05 Jy ! Clean residual min=-0.007736 max=0.007367 Jy/beam ! Clean residual mean=0.000012 rms=0.002153 Jy/beam ! Combined flux in latest and established models = 0.147895 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 40 components and 0.147895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147898Jy sigma=0.000647 ! Fit after self-cal, rms=0.147905Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=6.865 mas, bpa=-8.285 degrees ! Estimated noise=3259.65 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.003 x 6.865 at -8.285 degrees (North through East) ! Clean map min=-0.011857 max=0.14521 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.583 mas, bmaj=6.365 mas, bpa=-10.21 degrees ! Estimated noise=3680.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110422 Jy ! Component: 100 - total flux cleaned = 0.137763 Jy ! Component: 150 - total flux cleaned = 0.144484 Jy ! Component: 200 - total flux cleaned = 0.146088 Jy ! Total flux subtracted in 200 components = 0.146088 Jy ! Clean residual min=-0.011528 max=0.009151 Jy/beam ! Clean residual mean=-0.000001 rms=0.002294 Jy/beam ! Combined flux in latest and established models = 0.146088 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.146088 Jy ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=6.865 mas, bpa=-8.285 degrees ! Estimated noise=3259.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139847 Jy ! Component: 100 - total flux cleaned = 0.00204304 Jy ! Component: 150 - total flux cleaned = 0.00203873 Jy ! Component: 200 - total flux cleaned = 0.00169876 Jy ! Total flux subtracted in 200 components = 0.00169876 Jy ! Clean residual min=-0.008797 max=0.006973 Jy/beam ! Clean residual mean=0.000004 rms=0.001785 Jy/beam ! Combined flux in latest and established models = 0.147787 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 24 components and 0.147787 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.907 mas, bmaj=11.15 mas, bpa=8.038 degrees ! Estimated noise=4340.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117179 Jy ! Component: 100 - total flux cleaned = 0.00106629 Jy ! Component: 150 - total flux cleaned = 0.000975502 Jy ! Component: 200 - total flux cleaned = 0.000937012 Jy ! Total flux subtracted in 200 components = 0.000937012 Jy ! Clean residual min=-0.007620 max=0.007410 Jy/beam ! Clean residual mean=0.000017 rms=0.002148 Jy/beam ! Combined flux in latest and established models = 0.148724 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.13509e-05 Jy ! Component: 100 - total flux cleaned = -8.81639e-05 Jy ! Component: 150 - total flux cleaned = -8.71267e-05 Jy ! Component: 200 - total flux cleaned = -8.91481e-05 Jy ! Total flux subtracted in 200 components = -8.91481e-05 Jy ! Clean residual min=-0.007613 max=0.007452 Jy/beam ! Clean residual mean=0.000016 rms=0.002145 Jy/beam ! Combined flux in latest and established models = 0.148635 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.148635 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=6.865 mas, bpa=-8.285 degrees ! Estimated noise=3259.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000415135 Jy ! Component: 100 - total flux cleaned = -0.000410617 Jy ! Component: 150 - total flux cleaned = -0.000476274 Jy ! Component: 200 - total flux cleaned = -0.00060533 Jy ! Total flux subtracted in 200 components = -0.00060533 Jy ! Clean residual min=-0.008101 max=0.007271 Jy/beam ! Clean residual mean=0.000005 rms=0.001732 Jy/beam ! Combined flux in latest and established models = 0.14803 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.14803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147957Jy sigma=0.000647 ! Fit after self-cal, rms=0.147975Jy sigma=0.000647 wmodel J1458+0416_S_2017_01_21_pus_map.mod ! Writing 41 model components to file: J1458+0416_S_2017_01_21_pus_map.mod wobs J1458+0416_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1458+0416_S_2017_01_21_pus_uvs.fits wwins J1458+0416_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1458+0416_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00157581 Jy ! Component: 100 - total flux cleaned = -0.000903279 Jy ! Component: 150 - total flux cleaned = -0.000168794 Jy ! Component: 200 - total flux cleaned = 0.000323085 Jy ! Component: 250 - total flux cleaned = 0.000138675 Jy ! Component: 300 - total flux cleaned = -3.72392e-05 Jy ! Component: 350 - total flux cleaned = -0.000369672 Jy ! Component: 400 - total flux cleaned = -0.00100786 Jy ! Component: 450 - total flux cleaned = -0.0013945 Jy ! Component: 500 - total flux cleaned = -0.00161931 Jy ! Component: 550 - total flux cleaned = -0.00190865 Jy ! Component: 600 - total flux cleaned = -0.00197836 Jy ! Component: 650 - total flux cleaned = -0.00211264 Jy ! Component: 700 - total flux cleaned = -0.002311 Jy ! Component: 750 - total flux cleaned = -0.00257163 Jy ! Component: 800 - total flux cleaned = -0.00295303 Jy ! Component: 850 - total flux cleaned = -0.00326306 Jy ! Component: 900 - total flux cleaned = -0.00362791 Jy ! Component: 950 - total flux cleaned = -0.00410373 Jy ! Component: 1000 - total flux cleaned = -0.0045105 Jy ! Component: 1050 - total flux cleaned = -0.00485244 Jy ! Component: 1100 - total flux cleaned = -0.00530058 Jy ! Component: 1150 - total flux cleaned = -0.0057403 Jy ! Component: 1200 - total flux cleaned = -0.0064416 Jy ! Component: 1250 - total flux cleaned = -0.00670614 Jy ! Component: 1300 - total flux cleaned = -0.00707156 Jy ! Component: 1350 - total flux cleaned = -0.00738071 Jy ! Component: 1400 - total flux cleaned = -0.00753386 Jy ! Component: 1450 - total flux cleaned = -0.00773451 Jy ! Component: 1500 - total flux cleaned = -0.00778364 Jy ! Component: 1550 - total flux cleaned = -0.00773379 Jy ! Component: 1600 - total flux cleaned = -0.00768532 Jy ! Component: 1650 - total flux cleaned = -0.00778117 Jy ! Component: 1700 - total flux cleaned = -0.0077808 Jy ! Component: 1750 - total flux cleaned = -0.00773331 Jy ! Component: 1800 - total flux cleaned = -0.007733 Jy ! Component: 1850 - total flux cleaned = -0.00782569 Jy ! Component: 1900 - total flux cleaned = -0.00787171 Jy ! Component: 1950 - total flux cleaned = -0.00791753 Jy ! Component: 2000 - total flux cleaned = -0.00805388 Jy ! Component: 2050 - total flux cleaned = -0.00814381 Jy ! Component: 2100 - total flux cleaned = -0.00823353 Jy ! Component: 2150 - total flux cleaned = -0.0082779 Jy ! Component: 2200 - total flux cleaned = -0.00836659 Jy ! Component: 2250 - total flux cleaned = -0.00827804 Jy ! Component: 2300 - total flux cleaned = -0.00836614 Jy ! Component: 2350 - total flux cleaned = -0.00849764 Jy ! Component: 2400 - total flux cleaned = -0.00849753 Jy ! Component: 2450 - total flux cleaned = -0.00858486 Jy ! Component: 2500 - total flux cleaned = -0.00862832 Jy ! Component: 2550 - total flux cleaned = -0.00875883 Jy ! Component: 2600 - total flux cleaned = -0.00880208 Jy ! Component: 2650 - total flux cleaned = -0.00888818 Jy ! Component: 2700 - total flux cleaned = -0.00897463 Jy ! Component: 2750 - total flux cleaned = -0.00897464 Jy ! Component: 2800 - total flux cleaned = -0.00906107 Jy ! Component: 2850 - total flux cleaned = -0.0090612 Jy ! Component: 2900 - total flux cleaned = -0.00910476 Jy ! Component: 2950 - total flux cleaned = -0.00910481 Jy ! Component: 3000 - total flux cleaned = -0.00919178 Jy ! Component: 3050 - total flux cleaned = -0.00919196 Jy ! Component: 3100 - total flux cleaned = -0.00923566 Jy ! Component: 3150 - total flux cleaned = -0.00932301 Jy ! Component: 3200 - total flux cleaned = -0.00945422 Jy ! Component: 3250 - total flux cleaned = -0.00941022 Jy ! Component: 3300 - total flux cleaned = -0.00954195 Jy ! Component: 3350 - total flux cleaned = -0.00963004 Jy ! Component: 3400 - total flux cleaned = -0.00971829 Jy ! Component: 3450 - total flux cleaned = -0.00958593 Jy ! Component: 3500 - total flux cleaned = -0.00967453 Jy ! Component: 3550 - total flux cleaned = -0.00963015 Jy ! Component: 3600 - total flux cleaned = -0.00971894 Jy ! Component: 3650 - total flux cleaned = -0.00971914 Jy ! Component: 3700 - total flux cleaned = -0.00962945 Jy ! Component: 3750 - total flux cleaned = -0.0096296 Jy ! Component: 3800 - total flux cleaned = -0.0095392 Jy ! Component: 3850 - total flux cleaned = -0.00935789 Jy ! Component: 3900 - total flux cleaned = -0.00944865 Jy ! Component: 3950 - total flux cleaned = -0.00926593 Jy ! Component: 4000 - total flux cleaned = -0.00917409 Jy ! Component: 4050 - total flux cleaned = -0.00908189 Jy ! Total flux subtracted in 4096 components = -0.00912798 Jy ! Clean residual min=-0.002702 max=0.003050 Jy/beam ! Clean residual mean=0.000012 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.138902 Jy keep ! Adding 203 model components to the UV plane model. ! The established model now contains 244 components and 0.138902 Jy ![Exited script file: muppet] wmap "J1458+0416_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.003 x 6.865 at -8.285 degrees (North through East) ! Clean map min=-0.0094157 max=0.1432 Jy/beam ! Writing clean map to FITS file: J1458+0416_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.143198 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000793243 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.66185 1.66185 3.3237 6.64739 13.2948 26.5896 53.1791 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.143 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.003 x 6.865 at -8.285 degrees (North through East) ! Clean map min=-0.0094157 max=0.1432 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1458+0416_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:56:46 2019