! Started logfile: J1457+0749_S_2017_01_21_pus_uvs.log on Sun May 5 15:56:32 2019 obs J1457+0749_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1457+0749_S_2017_01_21_pus_uva.fits ! AN table 1: 83 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.688755 visibilities/baseline/integration-bin. ! Found source: J1457+0749 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 8232 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1457+0749_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 334 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.941824Jy sigma=0.007156 ! Fit after self-cal, rms=0.922679Jy sigma=0.007065 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.597 mas, bmaj=6.312 mas, bpa=-3.248 degrees ! Estimated noise=1460.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0634873 Jy ! Component: 100 - total flux cleaned = 0.0776726 Jy ! Total flux subtracted in 100 components = 0.0776726 Jy ! Clean residual min=-0.005439 max=0.005316 Jy/beam ! Clean residual mean=-0.000009 rms=0.001354 Jy/beam ! Combined flux in latest and established models = 0.0776726 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0776726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104427Jy sigma=0.000657 ! Fit after self-cal, rms=0.104383Jy sigma=0.000657 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.995 mas, bmaj=6.673 mas, bpa=-2.2 degrees ! Estimated noise=1151.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590657 Jy ! Component: 100 - total flux cleaned = 0.008364 Jy ! Component: 150 - total flux cleaned = 0.00875471 Jy ! Component: 200 - total flux cleaned = 0.0090217 Jy ! Total flux subtracted in 200 components = 0.0090217 Jy ! Clean residual min=-0.003359 max=0.003123 Jy/beam ! Clean residual mean=-0.000007 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.0866943 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.0866943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104108Jy sigma=0.000654 ! Fit after self-cal, rms=0.104101Jy sigma=0.000654 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.93 LA 1.03 ! MK 1.10 NL 1.00 OV 1.06 PT 0.98 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.02 LA 0.99 ! MK 1.09 NL 0.98 OV 1.18 PT 1.00 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 0.99 LA 0.94 ! MK 1.07 NL 1.03 OV 0.91 PT 1.00 ! SC 1.01 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.91 LA 0.93 ! MK 0.87 NL 1.00* OV 1.00 PT 1.07 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.104101Jy sigma=0.000654 ! Fit after self-cal, rms=0.102590Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.017 mas, bmaj=6.674 mas, bpa=-1.697 degrees ! Estimated noise=1156.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000174662 Jy ! Component: 100 - total flux cleaned = -0.000209651 Jy ! Component: 150 - total flux cleaned = -0.000127143 Jy ! Component: 200 - total flux cleaned = -5.43591e-05 Jy ! Total flux subtracted in 200 components = -5.43591e-05 Jy ! Clean residual min=-0.003087 max=0.003170 Jy/beam ! Clean residual mean=-0.000008 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.08664 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.08664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102568Jy sigma=0.000653 ! Fit after self-cal, rms=0.102550Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102550Jy sigma=0.000653 ! Fit after self-cal, rms=0.106290Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=6.641 mas, bpa=-2.076 degrees ! Estimated noise=1162.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00086162 Jy ! Component: 100 - total flux cleaned = 0.00100715 Jy ! Component: 150 - total flux cleaned = 0.00106467 Jy ! Component: 200 - total flux cleaned = 0.00108044 Jy ! Total flux subtracted in 200 components = 0.00108044 Jy ! Clean residual min=-0.002579 max=0.002968 Jy/beam ! Clean residual mean=0.000003 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.0877204 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.0877204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106269Jy sigma=0.000649 ! Fit after self-cal, rms=0.106695Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.4125e-05 Jy ! Component: 100 - total flux cleaned = -5.26963e-05 Jy ! Component: 150 - total flux cleaned = -6.6318e-05 Jy ! Component: 200 - total flux cleaned = -9.19186e-05 Jy ! Total flux subtracted in 200 components = -9.19186e-05 Jy ! Clean residual min=-0.002588 max=0.002922 Jy/beam ! Clean residual mean=0.000002 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.0876285 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 0.0876285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106692Jy sigma=0.000648 ! Fit after self-cal, rms=0.106691Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106691Jy sigma=0.000648 ! Fit after self-cal, rms=0.114710Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.975 mas, bmaj=6.625 mas, bpa=-2.174 degrees ! Estimated noise=1166.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000793769 Jy ! Component: 100 - total flux cleaned = 0.000946556 Jy ! Component: 150 - total flux cleaned = 0.000993584 Jy ! Component: 200 - total flux cleaned = 0.00103553 Jy ! Total flux subtracted in 200 components = 0.00103553 Jy ! Clean residual min=-0.002527 max=0.002897 Jy/beam ! Clean residual mean=0.000002 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.088664 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.0886641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114694Jy sigma=0.000647 ! Fit after self-cal, rms=0.114998Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.453e-05 Jy ! Component: 100 - total flux cleaned = -2.77887e-05 Jy ! Component: 150 - total flux cleaned = -6.25292e-06 Jy ! Component: 200 - total flux cleaned = 1.32479e-05 Jy ! Total flux subtracted in 200 components = 1.32479e-05 Jy ! Clean residual min=-0.002515 max=0.002866 Jy/beam ! Clean residual mean=0.000002 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.0886773 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 35 components and 0.0886773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114996Jy sigma=0.000647 ! Fit after self-cal, rms=0.114995Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114995Jy sigma=0.000647 ! Fit after self-cal, rms=0.119398Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.486 mas, bmaj=10.31 mas, bpa=1.657 degrees ! Estimated noise=1605.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000697888 Jy ! Component: 100 - total flux cleaned = 0.000991054 Jy ! Component: 150 - total flux cleaned = 0.00110183 Jy ! Component: 200 - total flux cleaned = 0.00112083 Jy ! Total flux subtracted in 200 components = 0.00112083 Jy ! Clean residual min=-0.003420 max=0.003832 Jy/beam ! Clean residual mean=0.000004 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.0897982 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.0897982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119392Jy sigma=0.000647 ! Fit after self-cal, rms=0.119469Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159272 Jy ! Component: 100 - total flux cleaned = 0.000159225 Jy ! Component: 150 - total flux cleaned = 0.000154456 Jy ! Component: 200 - total flux cleaned = 0.000150224 Jy ! Total flux subtracted in 200 components = 0.000150224 Jy ! Clean residual min=-0.003405 max=0.003841 Jy/beam ! Clean residual mean=0.000002 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.0899484 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.0899484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119469Jy sigma=0.000647 ! Fit after self-cal, rms=0.119511Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=6.611 mas, bpa=-2.238 degrees ! Estimated noise=1169.32 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.96 x 6.611 at -2.238 degrees (North through East) ! Clean map min=-0.0024229 max=0.08304 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.566 mas, bmaj=6.27 mas, bpa=-3.708 degrees ! Estimated noise=1480 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.063735 Jy ! Component: 100 - total flux cleaned = 0.0786753 Jy ! Component: 150 - total flux cleaned = 0.0849394 Jy ! Component: 200 - total flux cleaned = 0.0882605 Jy ! Total flux subtracted in 200 components = 0.0882605 Jy ! Clean residual min=-0.004250 max=0.004206 Jy/beam ! Clean residual mean=0.000000 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.0882605 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0882605 Jy ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=6.611 mas, bpa=-2.238 degrees ! Estimated noise=1169.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101625 Jy ! Component: 100 - total flux cleaned = 0.00124208 Jy ! Component: 150 - total flux cleaned = 0.00130759 Jy ! Component: 200 - total flux cleaned = 0.00136234 Jy ! Total flux subtracted in 200 components = 0.00136234 Jy ! Clean residual min=-0.002700 max=0.002926 Jy/beam ! Clean residual mean=0.000000 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.0896228 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.0896228 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.486 mas, bmaj=10.31 mas, bpa=1.657 degrees ! Estimated noise=1605.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236166 Jy ! Component: 100 - total flux cleaned = 0.000242866 Jy ! Component: 150 - total flux cleaned = 0.000259099 Jy ! Component: 200 - total flux cleaned = 0.000288261 Jy ! Total flux subtracted in 200 components = 0.000288261 Jy ! Clean residual min=-0.003405 max=0.003847 Jy/beam ! Clean residual mean=0.000002 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.0899111 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.96651e-05 Jy ! Component: 100 - total flux cleaned = 3.77926e-05 Jy ! Component: 150 - total flux cleaned = 4.35023e-05 Jy ! Component: 200 - total flux cleaned = 4.89998e-05 Jy ! Total flux subtracted in 200 components = 4.89998e-05 Jy ! Clean residual min=-0.003399 max=0.003835 Jy/beam ! Clean residual mean=0.000002 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.0899601 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.0899601 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=6.611 mas, bpa=-2.238 degrees ! Estimated noise=1169.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000270759 Jy ! Component: 100 - total flux cleaned = 0.000253501 Jy ! Component: 150 - total flux cleaned = 0.000254909 Jy ! Component: 200 - total flux cleaned = 0.000240744 Jy ! Total flux subtracted in 200 components = 0.000240744 Jy ! Clean residual min=-0.002642 max=0.002954 Jy/beam ! Clean residual mean=0.000001 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.0902008 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0902008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119506Jy sigma=0.000647 ! Fit after self-cal, rms=0.119509Jy sigma=0.000647 wmodel J1457+0749_S_2017_01_21_pus_map.mod ! Writing 37 model components to file: J1457+0749_S_2017_01_21_pus_map.mod wobs J1457+0749_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1457+0749_S_2017_01_21_pus_uvs.fits wwins J1457+0749_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1457+0749_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000801255 Jy ! Component: 100 - total flux cleaned = 0.00098979 Jy ! Component: 150 - total flux cleaned = 0.00121123 Jy ! Component: 200 - total flux cleaned = 0.00138274 Jy ! Component: 250 - total flux cleaned = 0.00154923 Jy ! Component: 300 - total flux cleaned = 0.00162936 Jy ! Component: 350 - total flux cleaned = 0.00174583 Jy ! Component: 400 - total flux cleaned = 0.00189607 Jy ! Component: 450 - total flux cleaned = 0.00207968 Jy ! Component: 500 - total flux cleaned = 0.00229548 Jy ! Component: 550 - total flux cleaned = 0.00250743 Jy ! Component: 600 - total flux cleaned = 0.00271594 Jy ! Component: 650 - total flux cleaned = 0.00292169 Jy ! Component: 700 - total flux cleaned = 0.0031907 Jy ! Component: 750 - total flux cleaned = 0.00338928 Jy ! Component: 800 - total flux cleaned = 0.00368314 Jy ! Component: 850 - total flux cleaned = 0.00403678 Jy ! Component: 900 - total flux cleaned = 0.00432223 Jy ! Component: 950 - total flux cleaned = 0.00463507 Jy ! Component: 1000 - total flux cleaned = 0.00485041 Jy ! Component: 1050 - total flux cleaned = 0.00512418 Jy ! Component: 1100 - total flux cleaned = 0.00527397 Jy ! Component: 1150 - total flux cleaned = 0.00548135 Jy ! Component: 1200 - total flux cleaned = 0.00556954 Jy ! Component: 1250 - total flux cleaned = 0.00574404 Jy ! Component: 1300 - total flux cleaned = 0.00580116 Jy ! Component: 1350 - total flux cleaned = 0.00594311 Jy ! Component: 1400 - total flux cleaned = 0.00597126 Jy ! Component: 1450 - total flux cleaned = 0.00608217 Jy ! Component: 1500 - total flux cleaned = 0.00624711 Jy ! Component: 1550 - total flux cleaned = 0.00641018 Jy ! Component: 1600 - total flux cleaned = 0.00635666 Jy ! Component: 1650 - total flux cleaned = 0.00649018 Jy ! Component: 1700 - total flux cleaned = 0.00664819 Jy ! Component: 1750 - total flux cleaned = 0.00672637 Jy ! Component: 1800 - total flux cleaned = 0.00682962 Jy ! Component: 1850 - total flux cleaned = 0.00690645 Jy ! Component: 1900 - total flux cleaned = 0.00708436 Jy ! Component: 1950 - total flux cleaned = 0.00718511 Jy ! Component: 2000 - total flux cleaned = 0.00728558 Jy ! Component: 2050 - total flux cleaned = 0.00748368 Jy ! Component: 2100 - total flux cleaned = 0.00755703 Jy ! Component: 2150 - total flux cleaned = 0.00775127 Jy ! Component: 2200 - total flux cleaned = 0.0078713 Jy ! Component: 2250 - total flux cleaned = 0.00794288 Jy ! Component: 2300 - total flux cleaned = 0.0079903 Jy ! Component: 2350 - total flux cleaned = 0.00817856 Jy ! Component: 2400 - total flux cleaned = 0.00822498 Jy ! Component: 2450 - total flux cleaned = 0.0083868 Jy ! Component: 2500 - total flux cleaned = 0.00845547 Jy ! Component: 2550 - total flux cleaned = 0.00852392 Jy ! Component: 2600 - total flux cleaned = 0.00856887 Jy ! Component: 2650 - total flux cleaned = 0.00854616 Jy ! Component: 2700 - total flux cleaned = 0.00861307 Jy ! Component: 2750 - total flux cleaned = 0.00865709 Jy ! Component: 2800 - total flux cleaned = 0.00874515 Jy ! Component: 2850 - total flux cleaned = 0.00870152 Jy ! Component: 2900 - total flux cleaned = 0.0088101 Jy ! Component: 2950 - total flux cleaned = 0.00878866 Jy ! Component: 3000 - total flux cleaned = 0.0088315 Jy ! Component: 3050 - total flux cleaned = 0.00885277 Jy ! Component: 3100 - total flux cleaned = 0.00887378 Jy ! Component: 3150 - total flux cleaned = 0.00881042 Jy ! Component: 3200 - total flux cleaned = 0.00883142 Jy ! Component: 3250 - total flux cleaned = 0.00881051 Jy ! Component: 3300 - total flux cleaned = 0.00881036 Jy ! Component: 3350 - total flux cleaned = 0.00878982 Jy ! Component: 3400 - total flux cleaned = 0.00881045 Jy ! Component: 3450 - total flux cleaned = 0.00881056 Jy ! Component: 3500 - total flux cleaned = 0.00875009 Jy ! Component: 3550 - total flux cleaned = 0.00877025 Jy ! Component: 3600 - total flux cleaned = 0.00875013 Jy ! Component: 3650 - total flux cleaned = 0.00873032 Jy ! Component: 3700 - total flux cleaned = 0.0087105 Jy ! Component: 3750 - total flux cleaned = 0.00871059 Jy ! Component: 3800 - total flux cleaned = 0.00873018 Jy ! Component: 3850 - total flux cleaned = 0.00871066 Jy ! Component: 3900 - total flux cleaned = 0.00871054 Jy ! Component: 3950 - total flux cleaned = 0.00867218 Jy ! Component: 4000 - total flux cleaned = 0.00865317 Jy ! Component: 4050 - total flux cleaned = 0.00865305 Jy ! Total flux subtracted in 4096 components = 0.00865302 Jy ! Clean residual min=-0.001194 max=0.001033 Jy/beam ! Clean residual mean=-0.000000 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.0988538 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 351 components and 0.0988539 Jy ![Exited script file: muppet] wmap "J1457+0749_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.96 x 6.611 at -2.238 degrees (North through East) ! Clean map min=-0.0022412 max=0.083312 Jy/beam ! Writing clean map to FITS file: J1457+0749_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0833122 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000350814 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.26325 1.26325 2.5265 5.05301 10.106 20.212 40.4241 80.8481 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.083 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.96 x 6.611 at -2.238 degrees (North through East) ! Clean map min=-0.0022412 max=0.083312 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1457+0749_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:56:37 2019