! Started logfile: J1454-4012_S_2017_08_12_pus_uvs.log on Fri May 10 15:01:53 2019 obs J1454-4012_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1454-4012_S_2017_08_12_pus_uva.fits ! AN table 1: 52 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.310256 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1454-4012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 2904 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1454-4012_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 520 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.750164Jy sigma=0.004492 ! Fit after self-cal, rms=0.735807Jy sigma=0.004413 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.013 mas, bmaj=6.115 mas, bpa=-1.261 degrees ! Estimated noise=3427.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.177817 Jy ! Component: 100 - total flux cleaned = 0.263052 Jy ! Total flux subtracted in 100 components = 0.263052 Jy ! Clean residual min=-0.030501 max=0.050890 Jy/beam ! Clean residual mean=-0.001009 rms=0.010456 Jy/beam ! Combined flux in latest and established models = 0.263052 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.263052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197353Jy sigma=0.001194 ! Fit after self-cal, rms=0.197128Jy sigma=0.001192 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.51 mas, bmaj=6.956 mas, bpa=-1.732 degrees ! Estimated noise=2521.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110748 Jy ! Component: 100 - total flux cleaned = 0.171042 Jy ! Component: 150 - total flux cleaned = 0.203983 Jy ! Component: 200 - total flux cleaned = 0.221974 Jy ! Total flux subtracted in 200 components = 0.221974 Jy ! Clean residual min=-0.016462 max=0.033691 Jy/beam ! Clean residual mean=-0.001034 rms=0.007446 Jy/beam ! Combined flux in latest and established models = 0.485026 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 37 components and 0.485026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125092Jy sigma=0.000746 ! Fit after self-cal, rms=0.124626Jy sigma=0.000743 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.97 ! LA 0.97 MK 1.05 NL 1.00* OV 1.16 ! PT 0.89 SC 1.15 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.94 ! LA 0.95 MK 1.07 NL 1.00* OV 1.22 ! PT 0.88 SC 1.10 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.88 ! LA 0.94 MK 0.99 NL 1.00* OV 1.12 ! PT 0.90 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.124626Jy sigma=0.000743 ! Fit after self-cal, rms=0.122421Jy sigma=0.000690 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=7.082 mas, bpa=-2.619 degrees ! Estimated noise=2558.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00238179 Jy ! Component: 100 - total flux cleaned = -0.00236237 Jy ! Component: 150 - total flux cleaned = -0.00254992 Jy ! Component: 200 - total flux cleaned = -0.00263687 Jy ! Total flux subtracted in 200 components = -0.00263687 Jy ! Clean residual min=-0.016684 max=0.019428 Jy/beam ! Clean residual mean=-0.000272 rms=0.004638 Jy/beam ! Combined flux in latest and established models = 0.48239 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.48239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122130Jy sigma=0.000689 ! Fit after self-cal, rms=0.122419Jy sigma=0.000688 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122419Jy sigma=0.000688 ! Fit after self-cal, rms=0.123569Jy sigma=0.000687 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.607 mas, bmaj=7.092 mas, bpa=-3.115 degrees ! Estimated noise=2572.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177899 Jy ! Component: 100 - total flux cleaned = -0.00176934 Jy ! Component: 150 - total flux cleaned = -0.00186425 Jy ! Component: 200 - total flux cleaned = -0.00195569 Jy ! Total flux subtracted in 200 components = -0.00195569 Jy ! Clean residual min=-0.015982 max=0.019441 Jy/beam ! Clean residual mean=-0.000252 rms=0.004611 Jy/beam ! Combined flux in latest and established models = 0.480434 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.480434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123302Jy sigma=0.000686 ! Fit after self-cal, rms=0.123304Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000261821 Jy ! Component: 100 - total flux cleaned = -0.000343932 Jy ! Component: 150 - total flux cleaned = -0.000418898 Jy ! Component: 200 - total flux cleaned = -0.000417983 Jy ! Total flux subtracted in 200 components = -0.000417983 Jy ! Clean residual min=-0.016046 max=0.019067 Jy/beam ! Clean residual mean=-0.000256 rms=0.004606 Jy/beam ! Combined flux in latest and established models = 0.480016 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.480016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123213Jy sigma=0.000685 ! Fit after self-cal, rms=0.123203Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123203Jy sigma=0.000685 ! Fit after self-cal, rms=0.121296Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.606 mas, bmaj=6.956 mas, bpa=-3.144 degrees ! Estimated noise=2546.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00156175 Jy ! Component: 100 - total flux cleaned = -0.00175515 Jy ! Component: 150 - total flux cleaned = -0.00183855 Jy ! Component: 200 - total flux cleaned = -0.00184266 Jy ! Total flux subtracted in 200 components = -0.00184266 Jy ! Clean residual min=-0.014585 max=0.018906 Jy/beam ! Clean residual mean=-0.000255 rms=0.004441 Jy/beam ! Combined flux in latest and established models = 0.478173 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.478173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121140Jy sigma=0.000677 ! Fit after self-cal, rms=0.121130Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000113903 Jy ! Component: 100 - total flux cleaned = -0.000113021 Jy ! Component: 150 - total flux cleaned = -0.000114085 Jy ! Component: 200 - total flux cleaned = -0.000112378 Jy ! Total flux subtracted in 200 components = -0.000112378 Jy ! Clean residual min=-0.014591 max=0.018617 Jy/beam ! Clean residual mean=-0.000256 rms=0.004436 Jy/beam ! Combined flux in latest and established models = 0.478061 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 0.478061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121060Jy sigma=0.000677 ! Fit after self-cal, rms=0.121030Jy sigma=0.000677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121030Jy sigma=0.000677 ! Fit after self-cal, rms=0.120339Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.959 mas, bmaj=26.58 mas, bpa=-6.146 degrees ! Estimated noise=3560.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168483 Jy ! Component: 100 - total flux cleaned = 0.00167949 Jy ! Component: 150 - total flux cleaned = 0.00167942 Jy ! Component: 200 - total flux cleaned = 0.00168054 Jy ! Total flux subtracted in 200 components = 0.00168054 Jy ! Clean residual min=-0.022040 max=0.023206 Jy/beam ! Clean residual mean=-0.000540 rms=0.008463 Jy/beam ! Combined flux in latest and established models = 0.479741 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 54 components and 0.479741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120286Jy sigma=0.000676 ! Fit after self-cal, rms=0.120229Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176125 Jy ! Component: 100 - total flux cleaned = 0.000170186 Jy ! Component: 150 - total flux cleaned = 0.000167617 Jy ! Component: 200 - total flux cleaned = 0.000165936 Jy ! Total flux subtracted in 200 components = 0.000165936 Jy ! Clean residual min=-0.021980 max=0.023000 Jy/beam ! Clean residual mean=-0.000537 rms=0.008445 Jy/beam ! Combined flux in latest and established models = 0.479907 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 54 components and 0.479907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120292Jy sigma=0.000677 ! Fit after self-cal, rms=0.120220Jy sigma=0.000677 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.602 mas, bmaj=6.939 mas, bpa=-3.358 degrees ! Estimated noise=2525.88 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.602 x 6.939 at -3.358 degrees (North through East) ! Clean map min=-0.013682 max=0.22611 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.066 mas, bmaj=5.982 mas, bpa=-2.465 degrees ! Estimated noise=3529.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.180631 Jy ! Component: 100 - total flux cleaned = 0.269063 Jy ! Component: 150 - total flux cleaned = 0.329237 Jy ! Component: 200 - total flux cleaned = 0.371304 Jy ! Total flux subtracted in 200 components = 0.371304 Jy ! Clean residual min=-0.022443 max=0.027816 Jy/beam ! Clean residual mean=-0.000473 rms=0.006284 Jy/beam ! Combined flux in latest and established models = 0.371304 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.371304 Jy ! Inverting map and beam ! Estimated beam: bmin=2.602 mas, bmaj=6.939 mas, bpa=-3.358 degrees ! Estimated noise=2525.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0516739 Jy ! Component: 100 - total flux cleaned = 0.0807435 Jy ! Component: 150 - total flux cleaned = 0.09764 Jy ! Component: 200 - total flux cleaned = 0.106862 Jy ! Total flux subtracted in 200 components = 0.106862 Jy ! Clean residual min=-0.014610 max=0.017297 Jy/beam ! Clean residual mean=-0.000218 rms=0.004299 Jy/beam ! Combined flux in latest and established models = 0.478165 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 51 components and 0.478165 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.959 mas, bmaj=26.58 mas, bpa=-6.146 degrees ! Estimated noise=3560.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.005094 Jy ! Component: 100 - total flux cleaned = 0.00512442 Jy ! Component: 150 - total flux cleaned = 0.00514104 Jy ! Component: 200 - total flux cleaned = 0.00554196 Jy ! Total flux subtracted in 200 components = 0.00554196 Jy ! Clean residual min=-0.021379 max=0.022625 Jy/beam ! Clean residual mean=-0.000443 rms=0.008096 Jy/beam ! Combined flux in latest and established models = 0.483707 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000378159 Jy ! Component: 100 - total flux cleaned = 0.000559867 Jy ! Component: 150 - total flux cleaned = 0.000896807 Jy ! Component: 200 - total flux cleaned = 0.00121369 Jy ! Total flux subtracted in 200 components = 0.00121369 Jy ! Clean residual min=-0.020796 max=0.022202 Jy/beam ! Clean residual mean=-0.000425 rms=0.007916 Jy/beam ! Combined flux in latest and established models = 0.484921 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 0.484921 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.602 mas, bmaj=6.939 mas, bpa=-3.358 degrees ! Estimated noise=2525.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00136823 Jy ! Component: 100 - total flux cleaned = -0.00139048 Jy ! Component: 150 - total flux cleaned = -0.00113921 Jy ! Component: 200 - total flux cleaned = -0.000745846 Jy ! Total flux subtracted in 200 components = -0.000745846 Jy ! Clean residual min=-0.012420 max=0.015214 Jy/beam ! Clean residual mean=-0.000181 rms=0.003917 Jy/beam ! Combined flux in latest and established models = 0.484175 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 68 components and 0.484175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116854Jy sigma=0.000660 ! Fit after self-cal, rms=0.116658Jy sigma=0.000659 wmodel J1454-4012_S_2017_08_12_pus_map.mod ! Writing 68 model components to file: J1454-4012_S_2017_08_12_pus_map.mod wobs J1454-4012_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1454-4012_S_2017_08_12_pus_uvs.fits wwins J1454-4012_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J1454-4012_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049317 Jy ! Component: 100 - total flux cleaned = 0.00625999 Jy ! Component: 150 - total flux cleaned = 0.00828778 Jy ! Component: 200 - total flux cleaned = 0.0101584 Jy ! Component: 250 - total flux cleaned = 0.0117278 Jy ! Component: 300 - total flux cleaned = 0.013365 Jy ! Component: 350 - total flux cleaned = 0.014756 Jy ! Component: 400 - total flux cleaned = 0.015785 Jy ! Component: 450 - total flux cleaned = 0.0164938 Jy ! Component: 500 - total flux cleaned = 0.0177 Jy ! Component: 550 - total flux cleaned = 0.0187241 Jy ! Component: 600 - total flux cleaned = 0.0195874 Jy ! Component: 650 - total flux cleaned = 0.0204179 Jy ! Component: 700 - total flux cleaned = 0.0213312 Jy ! Component: 750 - total flux cleaned = 0.0222109 Jy ! Component: 800 - total flux cleaned = 0.0229549 Jy ! Component: 850 - total flux cleaned = 0.0237796 Jy ! Component: 900 - total flux cleaned = 0.0246772 Jy ! Component: 950 - total flux cleaned = 0.0253581 Jy ! Component: 1000 - total flux cleaned = 0.0261148 Jy ! Component: 1050 - total flux cleaned = 0.0266671 Jy ! Component: 1100 - total flux cleaned = 0.0272045 Jy ! Component: 1150 - total flux cleaned = 0.0276403 Jy ! Component: 1200 - total flux cleaned = 0.0282313 Jy ! Component: 1250 - total flux cleaned = 0.0283948 Jy ! Component: 1300 - total flux cleaned = 0.0286378 Jy ! Component: 1350 - total flux cleaned = 0.0289532 Jy ! Component: 1400 - total flux cleaned = 0.0294146 Jy ! Component: 1450 - total flux cleaned = 0.0299401 Jy ! Component: 1500 - total flux cleaned = 0.0305243 Jy ! Component: 1550 - total flux cleaned = 0.0309547 Jy ! Component: 1600 - total flux cleaned = 0.0314457 Jy ! Component: 1650 - total flux cleaned = 0.0318585 Jy ! Component: 1700 - total flux cleaned = 0.0321966 Jy ! Component: 1750 - total flux cleaned = 0.0325949 Jy ! Component: 1800 - total flux cleaned = 0.0328564 Jy ! Component: 1850 - total flux cleaned = 0.0333047 Jy ! Component: 1900 - total flux cleaned = 0.0334289 Jy ! Component: 1950 - total flux cleaned = 0.0336764 Jy ! Component: 2000 - total flux cleaned = 0.0337978 Jy ! Component: 2050 - total flux cleaned = 0.0341585 Jy ! Component: 2100 - total flux cleaned = 0.0341003 Jy ! Component: 2150 - total flux cleaned = 0.0343907 Jy ! Component: 2200 - total flux cleaned = 0.034562 Jy ! Component: 2250 - total flux cleaned = 0.0347313 Jy ! Component: 2300 - total flux cleaned = 0.0347324 Jy ! Component: 2350 - total flux cleaned = 0.0351133 Jy ! Component: 2400 - total flux cleaned = 0.0350048 Jy ! Component: 2450 - total flux cleaned = 0.0352698 Jy ! Component: 2500 - total flux cleaned = 0.0354252 Jy ! Component: 2550 - total flux cleaned = 0.0355276 Jy ! Component: 2600 - total flux cleaned = 0.0357303 Jy ! Component: 2650 - total flux cleaned = 0.0358307 Jy ! Component: 2700 - total flux cleaned = 0.0361772 Jy ! Component: 2750 - total flux cleaned = 0.0361289 Jy ! Component: 2800 - total flux cleaned = 0.0362264 Jy ! Component: 2850 - total flux cleaned = 0.0365599 Jy ! Component: 2900 - total flux cleaned = 0.0368409 Jy ! Component: 2950 - total flux cleaned = 0.0369792 Jy ! Component: 3000 - total flux cleaned = 0.0371175 Jy ! Component: 3050 - total flux cleaned = 0.0374349 Jy ! Component: 3100 - total flux cleaned = 0.0376141 Jy ! Component: 3150 - total flux cleaned = 0.0377918 Jy ! Component: 3200 - total flux cleaned = 0.0380549 Jy ! Component: 3250 - total flux cleaned = 0.0381847 Jy ! Component: 3300 - total flux cleaned = 0.0385285 Jy ! Component: 3350 - total flux cleaned = 0.0386984 Jy ! Component: 3400 - total flux cleaned = 0.0390759 Jy ! Component: 3450 - total flux cleaned = 0.039242 Jy ! Component: 3500 - total flux cleaned = 0.0393657 Jy ! Component: 3550 - total flux cleaned = 0.0396104 Jy ! Component: 3600 - total flux cleaned = 0.0398524 Jy ! Component: 3650 - total flux cleaned = 0.0400525 Jy ! Component: 3700 - total flux cleaned = 0.0403298 Jy ! Component: 3750 - total flux cleaned = 0.0404474 Jy ! Component: 3800 - total flux cleaned = 0.0405252 Jy ! Component: 3850 - total flux cleaned = 0.040795 Jy ! Component: 3900 - total flux cleaned = 0.0409095 Jy ! Component: 3950 - total flux cleaned = 0.0410612 Jy ! Component: 4000 - total flux cleaned = 0.0412115 Jy ! Component: 4050 - total flux cleaned = 0.0414722 Jy ! Total flux subtracted in 4096 components = 0.0416196 Jy ! Clean residual min=-0.001835 max=0.002461 Jy/beam ! Clean residual mean=0.000029 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.525795 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 351 components and 0.525795 Jy ![Exited script file: muppet] wmap "J1454-4012_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.602 x 6.939 at -3.358 degrees (North through East) ! Clean map min=-0.010323 max=0.22526 Jy/beam ! Writing clean map to FITS file: J1454-4012_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.225257 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000623479 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.830359 0.830359 1.66072 3.32143 6.64287 13.2857 26.5715 53.143 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.225 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.602 x 6.939 at -3.358 degrees (North through East) ! Clean map min=-0.010323 max=0.22526 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1454-4012_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:01:56 2019