! Started logfile: J1454-4012_S_2017_08_05_pus_uvs.log on Thu May 9 19:31:53 2019 obs J1454-4012_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1454-4012_S_2017_08_05_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.208547 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1454-4012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 488 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1454-4012_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.628973Jy sigma=0.003690 ! Fit after self-cal, rms=0.637625Jy sigma=0.003660 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=49.19 mas, bpa=9.878 degrees ! Estimated noise=13326.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.304247 Jy ! Component: 100 - total flux cleaned = 0.425789 Jy ! Total flux subtracted in 100 components = 0.425789 Jy ! Clean residual min=-0.044268 max=0.056152 Jy/beam ! Clean residual mean=-0.000221 rms=0.019342 Jy/beam ! Combined flux in latest and established models = 0.425789 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.425789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151328Jy sigma=0.000842 ! Fit after self-cal, rms=0.150714Jy sigma=0.000838 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.331 mas, bmaj=48.08 mas, bpa=9.192 degrees ! Estimated noise=10800.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0596972 Jy ! Component: 100 - total flux cleaned = 0.0866832 Jy ! Component: 150 - total flux cleaned = 0.100485 Jy ! Component: 200 - total flux cleaned = 0.104482 Jy ! Total flux subtracted in 200 components = 0.104482 Jy ! Clean residual min=-0.013897 max=0.013935 Jy/beam ! Clean residual mean=-0.000125 rms=0.006065 Jy/beam ! Combined flux in latest and established models = 0.530272 Jy ! Performing phase self-cal ! Adding 105 model components to the UV plane model. ! The established model now contains 122 components and 0.530272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109084Jy sigma=0.000597 ! Fit after self-cal, rms=0.108632Jy sigma=0.000594 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 0.99 ! LA 0.92 MK 1.00* NL 1.00* OV 1.06 ! PT 1.00* SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.99 ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 0.96 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.108632Jy sigma=0.000594 ! Fit after self-cal, rms=0.109970Jy sigma=0.000598 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=46.9 mas, bpa=9.299 degrees ! Estimated noise=11660.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119101 Jy ! Component: 100 - total flux cleaned = 0.0135705 Jy ! Component: 150 - total flux cleaned = 0.0125338 Jy ! Component: 200 - total flux cleaned = 0.0122186 Jy ! Total flux subtracted in 200 components = 0.0122186 Jy ! Clean residual min=-0.004738 max=0.004816 Jy/beam ! Clean residual mean=-0.000049 rms=0.001624 Jy/beam ! Combined flux in latest and established models = 0.54249 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 186 components and 0.542491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106438Jy sigma=0.000577 ! Fit after self-cal, rms=0.106355Jy sigma=0.000576 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106355Jy sigma=0.000576 ! Fit after self-cal, rms=0.106481Jy sigma=0.000576 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=46.83 mas, bpa=9.287 degrees ! Estimated noise=11691.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00163465 Jy ! Component: 100 - total flux cleaned = -0.00154144 Jy ! Component: 150 - total flux cleaned = -0.00131563 Jy ! Component: 200 - total flux cleaned = -0.000688015 Jy ! Total flux subtracted in 200 components = -0.000688015 Jy ! Clean residual min=-0.001654 max=0.001669 Jy/beam ! Clean residual mean=-0.000010 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.541803 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 219 components and 0.541803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106278Jy sigma=0.000574 ! Fit after self-cal, rms=0.106234Jy sigma=0.000574 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000853633 Jy ! Component: 100 - total flux cleaned = 0.000673332 Jy ! Component: 150 - total flux cleaned = 0.000829292 Jy ! Component: 200 - total flux cleaned = 0.000933684 Jy ! Total flux subtracted in 200 components = 0.000933684 Jy ! Clean residual min=-0.000907 max=0.000905 Jy/beam ! Clean residual mean=-0.000004 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.542736 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 258 components and 0.542736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106193Jy sigma=0.000574 ! Fit after self-cal, rms=0.106199Jy sigma=0.000574 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106199Jy sigma=0.000574 ! Fit after self-cal, rms=0.106162Jy sigma=0.000574 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=46.83 mas, bpa=9.286 degrees ! Estimated noise=11687.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000394404 Jy ! Component: 100 - total flux cleaned = -0.000671764 Jy ! Component: 150 - total flux cleaned = -0.000793098 Jy ! Component: 200 - total flux cleaned = -0.000856192 Jy ! Total flux subtracted in 200 components = -0.000856192 Jy ! Clean residual min=-0.000576 max=0.000561 Jy/beam ! Clean residual mean=-0.000007 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.54188 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 301 components and 0.54188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106146Jy sigma=0.000574 ! Fit after self-cal, rms=0.106145Jy sigma=0.000574 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144133 Jy ! Component: 100 - total flux cleaned = -0.000117979 Jy ! Component: 150 - total flux cleaned = -0.000145261 Jy ! Component: 200 - total flux cleaned = -0.00020523 Jy ! Total flux subtracted in 200 components = -0.00020523 Jy ! Clean residual min=-0.000545 max=0.000533 Jy/beam ! Clean residual mean=-0.000006 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.541674 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 323 components and 0.541674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106135Jy sigma=0.000574 ! Fit after self-cal, rms=0.106135Jy sigma=0.000574 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106135Jy sigma=0.000574 ! Fit after self-cal, rms=0.106133Jy sigma=0.000574 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.737 mas, bmaj=47.63 mas, bpa=2.466 degrees ! Estimated noise=15065.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00042822 Jy ! Component: 100 - total flux cleaned = -0.000511782 Jy ! Component: 150 - total flux cleaned = -0.000658836 Jy ! Component: 200 - total flux cleaned = -0.000791189 Jy ! Total flux subtracted in 200 components = -0.000791189 Jy ! Clean residual min=-0.000277 max=0.000273 Jy/beam ! Clean residual mean=-0.000002 rms=0.000091 Jy/beam ! Combined flux in latest and established models = 0.540883 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 370 components and 0.540883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106129Jy sigma=0.000574 ! Fit after self-cal, rms=0.106130Jy sigma=0.000574 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.58583e-05 Jy ! Component: 100 - total flux cleaned = -7.69883e-05 Jy ! Component: 150 - total flux cleaned = -1.55541e-05 Jy ! Component: 200 - total flux cleaned = -5.19579e-06 Jy ! Total flux subtracted in 200 components = -5.19579e-06 Jy ! Clean residual min=-0.000179 max=0.000178 Jy/beam ! Clean residual mean=-0.000001 rms=0.000073 Jy/beam ! Combined flux in latest and established models = 0.540878 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 422 components and 0.540878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106126Jy sigma=0.000574 ! Fit after self-cal, rms=0.106127Jy sigma=0.000574 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=46.84 mas, bpa=9.286 degrees ! Estimated noise=11687.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.25 x 46.84 at 9.286 degrees (North through East) ! Clean map min=-0.010788 max=0.33585 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=49.11 mas, bpa=9.931 degrees ! Estimated noise=14014.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.29432 Jy ! Component: 100 - total flux cleaned = 0.408558 Jy ! Component: 150 - total flux cleaned = 0.450438 Jy ! Component: 200 - total flux cleaned = 0.462144 Jy ! Total flux subtracted in 200 components = 0.462144 Jy ! Clean residual min=-0.022143 max=0.022047 Jy/beam ! Clean residual mean=-0.000178 rms=0.009256 Jy/beam ! Combined flux in latest and established models = 0.462145 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 61 model components to the UV plane model. ! The established model now contains 61 components and 0.462145 Jy ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=46.84 mas, bpa=9.286 degrees ! Estimated noise=11687.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0092617 Jy ! Component: 100 - total flux cleaned = -0.00410404 Jy ! Component: 150 - total flux cleaned = 0.00115493 Jy ! Component: 200 - total flux cleaned = 0.00544875 Jy ! Total flux subtracted in 200 components = 0.00544875 Jy ! Clean residual min=-0.007785 max=0.007862 Jy/beam ! Clean residual mean=-0.000122 rms=0.003507 Jy/beam ! Combined flux in latest and established models = 0.467593 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 157 components and 0.467593 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.737 mas, bmaj=47.63 mas, bpa=2.466 degrees ! Estimated noise=15065.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0065421 Jy ! Component: 100 - total flux cleaned = 0.00834455 Jy ! Component: 150 - total flux cleaned = 0.00837287 Jy ! Component: 200 - total flux cleaned = 0.00642392 Jy ! Total flux subtracted in 200 components = 0.00642392 Jy ! Clean residual min=-0.002896 max=0.002921 Jy/beam ! Clean residual mean=-0.000021 rms=0.001471 Jy/beam ! Combined flux in latest and established models = 0.474017 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000475316 Jy ! Component: 100 - total flux cleaned = -0.00247146 Jy ! Component: 150 - total flux cleaned = -0.00400897 Jy ! Component: 200 - total flux cleaned = -0.00480079 Jy ! Total flux subtracted in 200 components = -0.00480079 Jy ! Clean residual min=-0.002666 max=0.002655 Jy/beam ! Clean residual mean=-0.000016 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.469216 Jy ! Adding 128 model components to the UV plane model. ! The established model now contains 274 components and 0.469216 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=46.84 mas, bpa=9.286 degrees ! Estimated noise=11687.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000312159 Jy ! Component: 100 - total flux cleaned = 0.000454722 Jy ! Component: 150 - total flux cleaned = 0.00055097 Jy ! Component: 200 - total flux cleaned = 0.000459027 Jy ! Total flux subtracted in 200 components = 0.000459027 Jy ! Clean residual min=-0.000767 max=0.000786 Jy/beam ! Clean residual mean=-0.000005 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.469675 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 318 components and 0.469676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106138Jy sigma=0.000574 ! Fit after self-cal, rms=0.106138Jy sigma=0.000574 wmodel J1454-4012_S_2017_08_05_pus_map.mod ! Writing 318 model components to file: J1454-4012_S_2017_08_05_pus_map.mod wobs J1454-4012_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1454-4012_S_2017_08_05_pus_uvs.fits wwins J1454-4012_S_2017_08_05_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1454-4012_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.25 x 46.84 at 9.286 degrees (North through East) ! Clean map min=-0.01358 max=0.33302 Jy/beam ! Writing clean map to FITS file: J1454-4012_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.333021 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000218715 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.197028 0.197028 0.394057 0.788114 1.57623 3.15246 6.30491 12.6098 25.2196 50.4393 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.333 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.25 x 46.84 at 9.286 degrees (North through East) ! Clean map min=-0.01358 max=0.33302 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1454-4012_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:31:57 2019