! Started logfile: J1454-4012_S_2017_07_16_pus_uvs.log on Thu May 9 11:12:05 2019 obs J1454-4012_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1454-4012_S_2017_07_16_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.317949 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1454-4012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 744 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1454-4012_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.740944Jy sigma=0.004533 ! Fit after self-cal, rms=0.728789Jy sigma=0.004466 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.232 mas, bmaj=6.689 mas, bpa=-8.337 degrees ! Estimated noise=5601.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.210618 Jy ! Component: 100 - total flux cleaned = 0.307631 Jy ! Total flux subtracted in 100 components = 0.307631 Jy ! Clean residual min=-0.037255 max=0.052239 Jy/beam ! Clean residual mean=-0.000164 rms=0.016158 Jy/beam ! Combined flux in latest and established models = 0.307631 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.307631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165435Jy sigma=0.001041 ! Fit after self-cal, rms=0.165228Jy sigma=0.001040 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.504 mas, bmaj=7.112 mas, bpa=-7.793 degrees ! Estimated noise=5131.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0880385 Jy ! Component: 100 - total flux cleaned = 0.139308 Jy ! Component: 150 - total flux cleaned = 0.168944 Jy ! Component: 200 - total flux cleaned = 0.189334 Jy ! Total flux subtracted in 200 components = 0.189334 Jy ! Clean residual min=-0.014650 max=0.014859 Jy/beam ! Clean residual mean=-0.000031 rms=0.006768 Jy/beam ! Combined flux in latest and established models = 0.496965 Jy ! Performing phase self-cal ! Adding 98 model components to the UV plane model. ! The established model now contains 118 components and 0.496965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106968Jy sigma=0.000658 ! Fit after self-cal, rms=0.106722Jy sigma=0.000656 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.98 ! LA 0.96 MK 1.03 NL 1.00* OV 1.04 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.95 ! LA 0.92 MK 1.04 NL 1.00* OV 1.06 ! PT 0.96 SC 1.06 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.89 ! LA 1.00* MK 1.04 NL 1.00* OV 0.94 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.106722Jy sigma=0.000656 ! Fit after self-cal, rms=0.101736Jy sigma=0.000634 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=7.191 mas, bpa=-7.917 degrees ! Estimated noise=5029.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144445 Jy ! Component: 100 - total flux cleaned = 0.0135444 Jy ! Component: 150 - total flux cleaned = 0.0117873 Jy ! Component: 200 - total flux cleaned = 0.011188 Jy ! Total flux subtracted in 200 components = 0.011188 Jy ! Clean residual min=-0.004563 max=0.004526 Jy/beam ! Clean residual mean=-0.000004 rms=0.001658 Jy/beam ! Combined flux in latest and established models = 0.508153 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 171 components and 0.508153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098283Jy sigma=0.000611 ! Fit after self-cal, rms=0.098276Jy sigma=0.000610 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098276Jy sigma=0.000610 ! Fit after self-cal, rms=0.098000Jy sigma=0.000609 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.565 mas, bmaj=7.198 mas, bpa=-7.991 degrees ! Estimated noise=5017.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223291 Jy ! Component: 100 - total flux cleaned = 0.00161492 Jy ! Component: 150 - total flux cleaned = 0.000952507 Jy ! Component: 200 - total flux cleaned = 0.000796347 Jy ! Total flux subtracted in 200 components = 0.000796347 Jy ! Clean residual min=-0.002235 max=0.002217 Jy/beam ! Clean residual mean=-0.000002 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.508949 Jy selfcal ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 220 components and 0.508949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097395Jy sigma=0.000605 ! Fit after self-cal, rms=0.097398Jy sigma=0.000605 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107277 Jy ! Component: 100 - total flux cleaned = -0.00189932 Jy ! Component: 150 - total flux cleaned = -0.00226296 Jy ! Component: 200 - total flux cleaned = -0.00292146 Jy ! Total flux subtracted in 200 components = -0.00292146 Jy ! Clean residual min=-0.001315 max=0.001314 Jy/beam ! Clean residual mean=-0.000007 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.506028 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 254 components and 0.506028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097224Jy sigma=0.000604 ! Fit after self-cal, rms=0.097228Jy sigma=0.000604 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097228Jy sigma=0.000604 ! Fit after self-cal, rms=0.097166Jy sigma=0.000604 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.566 mas, bmaj=7.198 mas, bpa=-8.051 degrees ! Estimated noise=5016.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000586601 Jy ! Component: 100 - total flux cleaned = 0.000664735 Jy ! Component: 150 - total flux cleaned = 0.000595709 Jy ! Component: 200 - total flux cleaned = 0.000596517 Jy ! Total flux subtracted in 200 components = 0.000596517 Jy ! Clean residual min=-0.001058 max=0.001047 Jy/beam ! Clean residual mean=-0.000002 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.506624 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 291 components and 0.506624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097068Jy sigma=0.000603 ! Fit after self-cal, rms=0.097071Jy sigma=0.000603 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000199527 Jy ! Component: 100 - total flux cleaned = 0.000309948 Jy ! Component: 150 - total flux cleaned = 0.000311044 Jy ! Component: 200 - total flux cleaned = 0.000406281 Jy ! Total flux subtracted in 200 components = 0.000406281 Jy ! Clean residual min=-0.000792 max=0.000795 Jy/beam ! Clean residual mean=0.000000 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.50703 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 331 components and 0.50703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097022Jy sigma=0.000603 ! Fit after self-cal, rms=0.097023Jy sigma=0.000603 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097023Jy sigma=0.000603 ! Fit after self-cal, rms=0.096856Jy sigma=0.000603 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.648 mas, bmaj=25.57 mas, bpa=-10.85 degrees ! Estimated noise=7185.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000222374 Jy ! Component: 100 - total flux cleaned = -0.000575314 Jy ! Component: 150 - total flux cleaned = -0.000455584 Jy ! Component: 200 - total flux cleaned = -0.000353296 Jy ! Total flux subtracted in 200 components = -0.000353296 Jy ! Clean residual min=-0.000441 max=0.000449 Jy/beam ! Clean residual mean=-0.000002 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.506677 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 364 components and 0.506677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096844Jy sigma=0.000603 ! Fit after self-cal, rms=0.096845Jy sigma=0.000603 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.40653e-05 Jy ! Component: 100 - total flux cleaned = -0.000212356 Jy ! Component: 150 - total flux cleaned = -0.000422716 Jy ! Component: 200 - total flux cleaned = -0.000472213 Jy ! Total flux subtracted in 200 components = -0.000472213 Jy ! Clean residual min=-0.000440 max=0.000448 Jy/beam ! Clean residual mean=0.000004 rms=0.000165 Jy/beam ! Combined flux in latest and established models = 0.506205 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 388 components and 0.506204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096838Jy sigma=0.000603 ! Fit after self-cal, rms=0.096836Jy sigma=0.000603 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.565 mas, bmaj=7.197 mas, bpa=-8.09 degrees ! Estimated noise=5008.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.565 x 7.197 at -8.09 degrees (North through East) ! Clean map min=-0.0048061 max=0.19657 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.28 mas, bmaj=6.728 mas, bpa=-8.43 degrees ! Estimated noise=5545.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.206009 Jy ! Component: 100 - total flux cleaned = 0.297663 Jy ! Component: 150 - total flux cleaned = 0.357567 Jy ! Component: 200 - total flux cleaned = 0.398104 Jy ! Total flux subtracted in 200 components = 0.398104 Jy ! Clean residual min=-0.021859 max=0.022438 Jy/beam ! Clean residual mean=-0.000022 rms=0.008150 Jy/beam ! Combined flux in latest and established models = 0.398104 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 58 model components to the UV plane model. ! The established model now contains 58 components and 0.398104 Jy ! Inverting map and beam ! Estimated beam: bmin=2.565 mas, bmaj=7.197 mas, bpa=-8.09 degrees ! Estimated noise=5008.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0364991 Jy ! Component: 100 - total flux cleaned = 0.0429794 Jy ! Component: 150 - total flux cleaned = 0.0445719 Jy ! Component: 200 - total flux cleaned = 0.0458739 Jy ! Total flux subtracted in 200 components = 0.0458739 Jy ! Clean residual min=-0.009966 max=0.010046 Jy/beam ! Clean residual mean=0.000047 rms=0.004583 Jy/beam ! Combined flux in latest and established models = 0.443978 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 150 components and 0.443978 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.648 mas, bmaj=25.57 mas, bpa=-10.85 degrees ! Estimated noise=7185.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208828 Jy ! Component: 100 - total flux cleaned = 0.0347876 Jy ! Component: 150 - total flux cleaned = 0.0471823 Jy ! Component: 200 - total flux cleaned = 0.055771 Jy ! Total flux subtracted in 200 components = 0.055771 Jy ! Clean residual min=-0.006443 max=0.006580 Jy/beam ! Clean residual mean=0.000086 rms=0.002739 Jy/beam ! Combined flux in latest and established models = 0.499749 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632654 Jy ! Component: 100 - total flux cleaned = 0.00902964 Jy ! Component: 150 - total flux cleaned = 0.00966838 Jy ! Component: 200 - total flux cleaned = 0.0103671 Jy ! Total flux subtracted in 200 components = 0.0103671 Jy ! Clean residual min=-0.006067 max=0.006117 Jy/beam ! Clean residual mean=0.000145 rms=0.002487 Jy/beam ! Combined flux in latest and established models = 0.510116 Jy ! Adding 184 model components to the UV plane model. ! The established model now contains 334 components and 0.510116 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.565 mas, bmaj=7.197 mas, bpa=-8.09 degrees ! Estimated noise=5008.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0018312 Jy ! Component: 100 - total flux cleaned = -0.00314908 Jy ! Component: 150 - total flux cleaned = -0.0031683 Jy ! Component: 200 - total flux cleaned = -0.00345892 Jy ! Total flux subtracted in 200 components = -0.00345892 Jy ! Clean residual min=-0.002317 max=0.002329 Jy/beam ! Clean residual mean=-0.000011 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.506657 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 390 components and 0.506657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097231Jy sigma=0.000605 ! Fit after self-cal, rms=0.097171Jy sigma=0.000605 wmodel J1454-4012_S_2017_07_16_pus_map.mod ! Writing 390 model components to file: J1454-4012_S_2017_07_16_pus_map.mod wobs J1454-4012_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1454-4012_S_2017_07_16_pus_uvs.fits wwins J1454-4012_S_2017_07_16_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1454-4012_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.565 x 7.197 at -8.09 degrees (North through East) ! Clean map min=-0.0048002 max=0.17947 Jy/beam ! Writing clean map to FITS file: J1454-4012_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.179472 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000699763 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.1697 1.1697 2.3394 4.67881 9.35762 18.7152 37.4305 74.8609 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.179 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.565 x 7.197 at -8.09 degrees (North through East) ! Clean map min=-0.0048002 max=0.17947 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1454-4012_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:12:08 2019