! Started logfile: J1454-4012_S_2017_07_09_pus_uvs.log on Wed May 8 14:51:44 2019 obs J1454-4012_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1454-4012_S_2017_07_09_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.441026 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1454-4012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1454-4012_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.731691Jy sigma=0.004757 ! Fit after self-cal, rms=0.715878Jy sigma=0.004652 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.281 mas, bmaj=6.711 mas, bpa=0.297 degrees ! Estimated noise=4282.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.218418 Jy ! Component: 100 - total flux cleaned = 0.328874 Jy ! Total flux subtracted in 100 components = 0.328874 Jy ! Clean residual min=-0.027405 max=0.058736 Jy/beam ! Clean residual mean=-0.001059 rms=0.013132 Jy/beam ! Combined flux in latest and established models = 0.328874 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.328874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177491Jy sigma=0.001179 ! Fit after self-cal, rms=0.176828Jy sigma=0.001175 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.707 mas, bmaj=7.632 mas, bpa=-1.332 degrees ! Estimated noise=3787.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0998804 Jy ! Component: 100 - total flux cleaned = 0.149601 Jy ! Component: 150 - total flux cleaned = 0.174896 Jy ! Component: 200 - total flux cleaned = 0.187887 Jy ! Total flux subtracted in 200 components = 0.187887 Jy ! Clean residual min=-0.018387 max=0.040312 Jy/beam ! Clean residual mean=-0.000899 rms=0.008922 Jy/beam ! Combined flux in latest and established models = 0.51676 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 54 components and 0.51676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116981Jy sigma=0.000756 ! Fit after self-cal, rms=0.116834Jy sigma=0.000755 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.00* KP 0.99 ! LA 0.95 MK 1.05 NL 1.00* OV 1.29 ! PT 0.97 SC 0.87 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 0.95 ! LA 0.93 MK 0.98 NL 1.00* OV 1.28 ! PT 0.90 SC 1.21 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.98 ! LA 0.93 MK 1.01 NL 1.00* OV 1.23 ! PT 0.87 SC 0.94 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.116834Jy sigma=0.000755 ! Fit after self-cal, rms=0.109592Jy sigma=0.000674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.731 mas, bmaj=7.687 mas, bpa=-0.02453 degrees ! Estimated noise=3836.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000937497 Jy ! Component: 100 - total flux cleaned = -0.000935513 Jy ! Component: 150 - total flux cleaned = -0.00101448 Jy ! Component: 200 - total flux cleaned = -0.00101238 Jy ! Total flux subtracted in 200 components = -0.00101238 Jy ! Clean residual min=-0.015166 max=0.023317 Jy/beam ! Clean residual mean=-0.000049 rms=0.005871 Jy/beam ! Combined flux in latest and established models = 0.515748 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 60 components and 0.515748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109419Jy sigma=0.000673 ! Fit after self-cal, rms=0.109700Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109700Jy sigma=0.000672 ! Fit after self-cal, rms=0.109012Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.721 mas, bmaj=7.671 mas, bpa=-0.1729 degrees ! Estimated noise=3807.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000656154 Jy ! Component: 100 - total flux cleaned = -0.000733933 Jy ! Component: 150 - total flux cleaned = -0.000736901 Jy ! Component: 200 - total flux cleaned = -0.000803286 Jy ! Total flux subtracted in 200 components = -0.000803286 Jy ! Clean residual min=-0.015301 max=0.022991 Jy/beam ! Clean residual mean=-0.000044 rms=0.005810 Jy/beam ! Combined flux in latest and established models = 0.514945 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.514944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108884Jy sigma=0.000672 ! Fit after self-cal, rms=0.108869Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129593 Jy ! Component: 100 - total flux cleaned = -6.00562e-05 Jy ! Component: 150 - total flux cleaned = 0.000122796 Jy ! Component: 200 - total flux cleaned = 0.000126621 Jy ! Total flux subtracted in 200 components = 0.000126621 Jy ! Clean residual min=-0.015257 max=0.022801 Jy/beam ! Clean residual mean=-0.000043 rms=0.005799 Jy/beam ! Combined flux in latest and established models = 0.515071 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 66 components and 0.515071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108792Jy sigma=0.000671 ! Fit after self-cal, rms=0.108779Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108779Jy sigma=0.000671 ! Fit after self-cal, rms=0.108143Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.711 mas, bmaj=7.656 mas, bpa=-0.3265 degrees ! Estimated noise=3782.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000501741 Jy ! Component: 100 - total flux cleaned = -0.000500418 Jy ! Component: 150 - total flux cleaned = -0.00044475 Jy ! Component: 200 - total flux cleaned = -0.000389773 Jy ! Total flux subtracted in 200 components = -0.000389773 Jy ! Clean residual min=-0.015250 max=0.022448 Jy/beam ! Clean residual mean=-0.000039 rms=0.005740 Jy/beam ! Combined flux in latest and established models = 0.514681 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.514681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108059Jy sigma=0.000671 ! Fit after self-cal, rms=0.108048Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.48202e-05 Jy ! Component: 100 - total flux cleaned = 3.35143e-05 Jy ! Component: 150 - total flux cleaned = 8.72455e-05 Jy ! Component: 200 - total flux cleaned = 0.000141081 Jy ! Total flux subtracted in 200 components = 0.000141081 Jy ! Clean residual min=-0.015215 max=0.022313 Jy/beam ! Clean residual mean=-0.000038 rms=0.005730 Jy/beam ! Combined flux in latest and established models = 0.514823 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 71 components and 0.514823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107994Jy sigma=0.000670 ! Fit after self-cal, rms=0.107980Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107980Jy sigma=0.000670 ! Fit after self-cal, rms=0.107470Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.3 mas, bmaj=29.79 mas, bpa=2.229 degrees ! Estimated noise=5223.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261953 Jy ! Component: 100 - total flux cleaned = 0.00262106 Jy ! Component: 150 - total flux cleaned = 0.00262089 Jy ! Component: 200 - total flux cleaned = 0.00262038 Jy ! Total flux subtracted in 200 components = 0.00262038 Jy ! Clean residual min=-0.022640 max=0.028915 Jy/beam ! Clean residual mean=-0.000028 rms=0.010392 Jy/beam ! Combined flux in latest and established models = 0.517443 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 73 components and 0.517443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107480Jy sigma=0.000670 ! Fit after self-cal, rms=0.107444Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120078 Jy ! Component: 100 - total flux cleaned = 0.000118264 Jy ! Component: 150 - total flux cleaned = 0.00011729 Jy ! Component: 200 - total flux cleaned = 0.000116604 Jy ! Total flux subtracted in 200 components = 0.000116604 Jy ! Clean residual min=-0.022624 max=0.028874 Jy/beam ! Clean residual mean=-0.000026 rms=0.010385 Jy/beam ! Combined flux in latest and established models = 0.51756 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 74 components and 0.51756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107509Jy sigma=0.000671 ! Fit after self-cal, rms=0.107479Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.703 mas, bmaj=7.644 mas, bpa=-0.4664 degrees ! Estimated noise=3761.27 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.703 x 7.644 at -0.4664 degrees (North through East) ! Clean map min=-0.014978 max=0.20844 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.275 mas, bmaj=6.734 mas, bpa=0.5476 degrees ! Estimated noise=4273.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.217955 Jy ! Component: 100 - total flux cleaned = 0.330478 Jy ! Component: 150 - total flux cleaned = 0.401295 Jy ! Component: 200 - total flux cleaned = 0.446458 Jy ! Total flux subtracted in 200 components = 0.446458 Jy ! Clean residual min=-0.020056 max=0.026442 Jy/beam ! Clean residual mean=-0.000264 rms=0.007684 Jy/beam ! Combined flux in latest and established models = 0.446458 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.446458 Jy ! Inverting map and beam ! Estimated beam: bmin=2.703 mas, bmaj=7.644 mas, bpa=-0.4664 degrees ! Estimated noise=3761.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0341784 Jy ! Component: 100 - total flux cleaned = 0.0512265 Jy ! Component: 150 - total flux cleaned = 0.0598858 Jy ! Component: 200 - total flux cleaned = 0.064291 Jy ! Total flux subtracted in 200 components = 0.064291 Jy ! Clean residual min=-0.015564 max=0.022715 Jy/beam ! Clean residual mean=-0.000073 rms=0.005833 Jy/beam ! Combined flux in latest and established models = 0.510749 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 65 components and 0.510749 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.3 mas, bmaj=29.79 mas, bpa=2.229 degrees ! Estimated noise=5223.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00546625 Jy ! Component: 100 - total flux cleaned = 0.00592323 Jy ! Component: 150 - total flux cleaned = 0.00592002 Jy ! Component: 200 - total flux cleaned = 0.00591978 Jy ! Total flux subtracted in 200 components = 0.00591978 Jy ! Clean residual min=-0.022478 max=0.029082 Jy/beam ! Clean residual mean=-0.000046 rms=0.010465 Jy/beam ! Combined flux in latest and established models = 0.516669 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.53342e-07 Jy ! Component: 100 - total flux cleaned = -5.95626e-06 Jy ! Component: 150 - total flux cleaned = -1.30739e-05 Jy ! Component: 200 - total flux cleaned = -2.01171e-05 Jy ! Total flux subtracted in 200 components = -2.01171e-05 Jy ! Clean residual min=-0.022506 max=0.029039 Jy/beam ! Clean residual mean=-0.000046 rms=0.010453 Jy/beam ! Combined flux in latest and established models = 0.516649 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 66 components and 0.516649 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.703 mas, bmaj=7.644 mas, bpa=-0.4664 degrees ! Estimated noise=3761.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00373337 Jy ! Component: 100 - total flux cleaned = -0.00344204 Jy ! Component: 150 - total flux cleaned = -0.00323452 Jy ! Component: 200 - total flux cleaned = -0.00323287 Jy ! Total flux subtracted in 200 components = -0.00323287 Jy ! Clean residual min=-0.015050 max=0.022882 Jy/beam ! Clean residual mean=-0.000049 rms=0.005807 Jy/beam ! Combined flux in latest and established models = 0.513416 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 78 components and 0.513416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108037Jy sigma=0.000673 ! Fit after self-cal, rms=0.107964Jy sigma=0.000673 wmodel J1454-4012_S_2017_07_09_pus_map.mod ! Writing 78 model components to file: J1454-4012_S_2017_07_09_pus_map.mod wobs J1454-4012_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1454-4012_S_2017_07_09_pus_uvs.fits wwins J1454-4012_S_2017_07_09_pus_map.win ! wwins: Wrote 1 windows to J1454-4012_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00971561 Jy ! Component: 100 - total flux cleaned = 0.0175655 Jy ! Component: 150 - total flux cleaned = 0.0210978 Jy ! Component: 200 - total flux cleaned = 0.0220594 Jy ! Component: 250 - total flux cleaned = 0.0222811 Jy ! Component: 300 - total flux cleaned = 0.022485 Jy ! Component: 350 - total flux cleaned = 0.0217382 Jy ! Component: 400 - total flux cleaned = 0.0212036 Jy ! Component: 450 - total flux cleaned = 0.0203682 Jy ! Component: 500 - total flux cleaned = 0.0198903 Jy ! Component: 550 - total flux cleaned = 0.0194362 Jy ! Component: 600 - total flux cleaned = 0.0189996 Jy ! Component: 650 - total flux cleaned = 0.0184377 Jy ! Component: 700 - total flux cleaned = 0.0178982 Jy ! Component: 750 - total flux cleaned = 0.0173783 Jy ! Component: 800 - total flux cleaned = 0.0169987 Jy ! Component: 850 - total flux cleaned = 0.0168746 Jy ! Component: 900 - total flux cleaned = 0.0165172 Jy ! Component: 950 - total flux cleaned = 0.0165168 Jy ! Component: 1000 - total flux cleaned = 0.016176 Jy ! Component: 1050 - total flux cleaned = 0.0158434 Jy ! Component: 1100 - total flux cleaned = 0.015734 Jy ! Component: 1150 - total flux cleaned = 0.0155192 Jy ! Component: 1200 - total flux cleaned = 0.0150949 Jy ! Component: 1250 - total flux cleaned = 0.0148864 Jy ! Component: 1300 - total flux cleaned = 0.014576 Jy ! Component: 1350 - total flux cleaned = 0.0145758 Jy ! Component: 1400 - total flux cleaned = 0.0143731 Jy ! Component: 1450 - total flux cleaned = 0.0141723 Jy ! Component: 1500 - total flux cleaned = 0.0139742 Jy ! Component: 1550 - total flux cleaned = 0.0137761 Jy ! Component: 1600 - total flux cleaned = 0.0134829 Jy ! Component: 1650 - total flux cleaned = 0.0131902 Jy ! Component: 1700 - total flux cleaned = 0.0128 Jy ! Component: 1750 - total flux cleaned = 0.0123103 Jy ! Component: 1800 - total flux cleaned = 0.0119137 Jy ! Component: 1850 - total flux cleaned = 0.0118134 Jy ! Component: 1900 - total flux cleaned = 0.0115114 Jy ! Component: 1950 - total flux cleaned = 0.0113067 Jy ! Component: 2000 - total flux cleaned = 0.0110997 Jy ! Component: 2050 - total flux cleaned = 0.0107797 Jy ! Component: 2100 - total flux cleaned = 0.0105613 Jy ! Component: 2150 - total flux cleaned = 0.0104503 Jy ! Component: 2200 - total flux cleaned = 0.010221 Jy ! Component: 2250 - total flux cleaned = 0.0101056 Jy ! Component: 2300 - total flux cleaned = 0.00974563 Jy ! Component: 2350 - total flux cleaned = 0.00962111 Jy ! Component: 2400 - total flux cleaned = 0.0093683 Jy ! Component: 2450 - total flux cleaned = 0.00910783 Jy ! Component: 2500 - total flux cleaned = 0.00884174 Jy ! Component: 2550 - total flux cleaned = 0.0085683 Jy ! Component: 2600 - total flux cleaned = 0.00828498 Jy ! Component: 2650 - total flux cleaned = 0.00814096 Jy ! Component: 2700 - total flux cleaned = 0.00784433 Jy ! Component: 2750 - total flux cleaned = 0.007538 Jy ! Component: 2800 - total flux cleaned = 0.00738259 Jy ! Component: 2850 - total flux cleaned = 0.00689334 Jy ! Component: 2900 - total flux cleaned = 0.00655836 Jy ! Component: 2950 - total flux cleaned = 0.00620977 Jy ! Component: 3000 - total flux cleaned = 0.00585627 Jy ! Component: 3050 - total flux cleaned = 0.00530418 Jy ! Component: 3100 - total flux cleaned = 0.00511571 Jy ! Component: 3150 - total flux cleaned = 0.00492434 Jy ! Component: 3200 - total flux cleaned = 0.00432471 Jy ! Component: 3250 - total flux cleaned = 0.00411979 Jy ! Component: 3300 - total flux cleaned = 0.00369496 Jy ! Component: 3350 - total flux cleaned = 0.00325804 Jy ! Component: 3400 - total flux cleaned = 0.00303395 Jy ! Component: 3450 - total flux cleaned = 0.00256515 Jy ! Component: 3500 - total flux cleaned = 0.00207957 Jy ! Component: 3550 - total flux cleaned = 0.00182794 Jy ! Component: 3600 - total flux cleaned = 0.0013192 Jy ! Component: 3650 - total flux cleaned = 0.000793531 Jy ! Component: 3700 - total flux cleaned = 0.000248426 Jy ! Component: 3750 - total flux cleaned = -0.000318726 Jy ! Component: 3800 - total flux cleaned = -0.00061156 Jy ! Component: 3850 - total flux cleaned = -0.00120831 Jy ! Component: 3900 - total flux cleaned = -0.00182675 Jy ! Component: 3950 - total flux cleaned = -0.00246311 Jy ! Component: 4000 - total flux cleaned = -0.00278589 Jy ! Component: 4050 - total flux cleaned = -0.00380032 Jy ! Total flux subtracted in 4096 components = -0.00414979 Jy ! Clean residual min=-0.021168 max=0.018349 Jy/beam ! Clean residual mean=0.000441 rms=0.004644 Jy/beam ! Combined flux in latest and established models = 0.509266 Jy keep ! Adding 177 model components to the UV plane model. ! The established model now contains 255 components and 0.509266 Jy ![Exited script file: muppet] wmap "J1454-4012_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.703 x 7.644 at -0.4664 degrees (North through East) ! Clean map min=-0.042701 max=0.21469 Jy/beam ! Writing clean map to FITS file: J1454-4012_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.214687 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00559554 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -7.81913 7.81913 15.6383 31.2765 62.553 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0167 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.214 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.703 x 7.644 at -0.4664 degrees (North through East) ! Clean map min=-0.042701 max=0.21469 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1454-4012_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:51:48 2019