! Started logfile: J1454-4012_S_2017_05_27_pus_uvs.log on Fri May 3 11:09:35 2019 obs J1454-4012_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1454-4012_S_2017_05_27_pus_uva.fits ! AN table 1: 23 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.378744 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1454-4012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 1568 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1454-4012_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.765680Jy sigma=0.003402 ! Fit after self-cal, rms=0.734185Jy sigma=0.003309 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.629 mas, bmaj=7.894 mas, bpa=-9.26 degrees ! Estimated noise=5289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.250027 Jy ! Component: 100 - total flux cleaned = 0.363322 Jy ! Total flux subtracted in 100 components = 0.363322 Jy ! Clean residual min=-0.047243 max=0.077473 Jy/beam ! Clean residual mean=0.000015 rms=0.016277 Jy/beam ! Combined flux in latest and established models = 0.363322 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.363322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246178Jy sigma=0.001114 ! Fit after self-cal, rms=0.245455Jy sigma=0.001112 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=9.001 mas, bpa=-9.028 degrees ! Estimated noise=4187.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0967268 Jy ! Component: 100 - total flux cleaned = 0.145295 Jy ! Component: 150 - total flux cleaned = 0.170272 Jy ! Component: 200 - total flux cleaned = 0.174855 Jy ! Total flux subtracted in 200 components = 0.174855 Jy ! Clean residual min=-0.034652 max=0.063890 Jy/beam ! Clean residual mean=-0.000331 rms=0.012237 Jy/beam ! Combined flux in latest and established models = 0.538178 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 48 components and 0.538178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216995Jy sigma=0.000866 ! Fit after self-cal, rms=0.216040Jy sigma=0.000865 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 1.57 KP 0.93 ! LA 0.90 MK 1.13 NL 2.96 OV 1.24 ! PT 0.97 SC 1.06 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.81 KP 0.86 ! LA 0.88 MK 1.27 NL 3.54 OV 1.20 ! PT 0.95 SC 1.15 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.48 KP 0.91 ! LA 0.87 MK 1.13 NL 3.16 OV 1.16 ! PT 0.92 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.08 KP 1.00* ! LA 0.77 MK 0.95 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.216040Jy sigma=0.000865 ! Fit after self-cal, rms=0.417305Jy sigma=0.000722 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=9.183 mas, bpa=-8.411 degrees ! Estimated noise=4664.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384962 Jy ! Component: 100 - total flux cleaned = 0.00423125 Jy ! Component: 150 - total flux cleaned = 0.00422753 Jy ! Component: 200 - total flux cleaned = 0.00421187 Jy ! Total flux subtracted in 200 components = 0.00421187 Jy ! Clean residual min=-0.022499 max=0.034010 Jy/beam ! Clean residual mean=0.000119 rms=0.007228 Jy/beam ! Combined flux in latest and established models = 0.54239 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.54239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.416818Jy sigma=0.000722 ! Fit after self-cal, rms=0.428398Jy sigma=0.000719 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428398Jy sigma=0.000719 ! Fit after self-cal, rms=0.434043Jy sigma=0.000702 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=9.22 mas, bpa=-8.565 degrees ! Estimated noise=4721.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231173 Jy ! Component: 100 - total flux cleaned = 0.00190853 Jy ! Component: 150 - total flux cleaned = 0.00188261 Jy ! Component: 200 - total flux cleaned = 0.0018775 Jy ! Total flux subtracted in 200 components = 0.0018775 Jy ! Clean residual min=-0.020286 max=0.029712 Jy/beam ! Clean residual mean=0.000352 rms=0.005678 Jy/beam ! Combined flux in latest and established models = 0.544267 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.544267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.433654Jy sigma=0.000701 ! Fit after self-cal, rms=0.434276Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-55, -58). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217257 Jy ! Component: 100 - total flux cleaned = 0.0218013 Jy ! Component: 150 - total flux cleaned = 0.0221701 Jy ! Component: 200 - total flux cleaned = 0.0224911 Jy ! Total flux subtracted in 200 components = 0.0224911 Jy ! Clean residual min=-0.017978 max=0.025386 Jy/beam ! Clean residual mean=0.000215 rms=0.004782 Jy/beam ! Combined flux in latest and established models = 0.566758 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 0.566758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.430745Jy sigma=0.000689 ! Fit after self-cal, rms=0.432421Jy sigma=0.000688 ! Inverting map ! Added new window around map position (-15, -19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205724 Jy ! Component: 100 - total flux cleaned = 0.0258916 Jy ! Component: 150 - total flux cleaned = 0.0259184 Jy ! Component: 200 - total flux cleaned = 0.025608 Jy ! Total flux subtracted in 200 components = 0.025608 Jy ! Clean residual min=-0.016350 max=0.017053 Jy/beam ! Clean residual mean=0.000242 rms=0.004251 Jy/beam ! Combined flux in latest and established models = 0.592366 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 98 components and 0.592366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.429285Jy sigma=0.000680 ! Fit after self-cal, rms=0.431524Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.431524Jy sigma=0.000679 ! Fit after self-cal, rms=0.398819Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.322 mas, bmaj=9.25 mas, bpa=-8.218 degrees ! Estimated noise=4673.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00918448 Jy ! Component: 100 - total flux cleaned = 0.0102952 Jy ! Component: 150 - total flux cleaned = 0.0103177 Jy ! Component: 200 - total flux cleaned = 0.0100105 Jy ! Total flux subtracted in 200 components = 0.0100105 Jy ! Clean residual min=-0.014926 max=0.016111 Jy/beam ! Clean residual mean=0.000138 rms=0.003907 Jy/beam ! Combined flux in latest and established models = 0.602377 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 112 components and 0.602377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396768Jy sigma=0.000673 ! Fit after self-cal, rms=0.397701Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000353293 Jy ! Component: 100 - total flux cleaned = 0.00159811 Jy ! Component: 150 - total flux cleaned = 0.00160105 Jy ! Component: 200 - total flux cleaned = 0.00134112 Jy ! Total flux subtracted in 200 components = 0.00134112 Jy ! Clean residual min=-0.014633 max=0.014889 Jy/beam ! Clean residual mean=0.000149 rms=0.003801 Jy/beam ! Combined flux in latest and established models = 0.603718 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 118 components and 0.603718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396220Jy sigma=0.000671 ! Fit after self-cal, rms=0.396780Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396780Jy sigma=0.000670 ! Fit after self-cal, rms=0.383838Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.852 mas, bmaj=30.68 mas, bpa=2.711 degrees ! Estimated noise=5133.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132325 Jy ! Component: 100 - total flux cleaned = 0.000819073 Jy ! Component: 150 - total flux cleaned = 0.000120865 Jy ! Component: 200 - total flux cleaned = -0.000308404 Jy ! Total flux subtracted in 200 components = -0.000308404 Jy ! Clean residual min=-0.012769 max=0.014182 Jy/beam ! Clean residual mean=0.000147 rms=0.003876 Jy/beam ! Combined flux in latest and established models = 0.603409 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 128 components and 0.603409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.382539Jy sigma=0.000669 ! Fit after self-cal, rms=0.381847Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320538 Jy ! Component: 100 - total flux cleaned = 0.000358008 Jy ! Component: 150 - total flux cleaned = 0.000154268 Jy ! Component: 200 - total flux cleaned = -0.000380117 Jy ! Total flux subtracted in 200 components = -0.000380117 Jy ! Clean residual min=-0.012978 max=0.014000 Jy/beam ! Clean residual mean=0.000169 rms=0.003679 Jy/beam ! Combined flux in latest and established models = 0.603029 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 134 components and 0.603029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.380885Jy sigma=0.000669 ! Fit after self-cal, rms=0.379564Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=9.253 mas, bpa=-7.848 degrees ! Estimated noise=4639.81 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.32 x 9.253 at -7.848 degrees (North through East) ! Clean map min=-0.034439 max=0.19571 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.757 mas, bmaj=8.035 mas, bpa=-7.784 degrees ! Estimated noise=6032.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.273069 Jy ! Component: 100 - total flux cleaned = 0.382406 Jy ! Component: 150 - total flux cleaned = 0.444825 Jy ! Component: 200 - total flux cleaned = 0.48938 Jy ! Total flux subtracted in 200 components = 0.48938 Jy ! Clean residual min=-0.028299 max=0.040165 Jy/beam ! Clean residual mean=0.000059 rms=0.008602 Jy/beam ! Combined flux in latest and established models = 0.48938 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 58 model components to the UV plane model. ! The established model now contains 58 components and 0.48938 Jy ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=9.253 mas, bpa=-7.848 degrees ! Estimated noise=4639.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0479967 Jy ! Component: 100 - total flux cleaned = 0.0767205 Jy ! Component: 150 - total flux cleaned = 0.0890805 Jy ! Component: 200 - total flux cleaned = 0.0936012 Jy ! Total flux subtracted in 200 components = 0.0936012 Jy ! Clean residual min=-0.019479 max=0.023662 Jy/beam ! Clean residual mean=0.000050 rms=0.005159 Jy/beam ! Combined flux in latest and established models = 0.582982 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 95 components and 0.582982 Jy ! Inverting map ! Added new window around map position (-5.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184308 Jy ! Component: 100 - total flux cleaned = 0.0221047 Jy ! Component: 150 - total flux cleaned = 0.0252526 Jy ! Component: 200 - total flux cleaned = 0.0280602 Jy ! Total flux subtracted in 200 components = 0.0280602 Jy ! Clean residual min=-0.014448 max=0.013641 Jy/beam ! Clean residual mean=0.000094 rms=0.003886 Jy/beam ! Combined flux in latest and established models = 0.611042 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 128 components and 0.611042 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.852 mas, bmaj=30.68 mas, bpa=2.711 degrees ! Estimated noise=5133.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227902 Jy ! Component: 100 - total flux cleaned = 0.00295997 Jy ! Component: 150 - total flux cleaned = 0.0032592 Jy ! Component: 200 - total flux cleaned = 0.00353623 Jy ! Total flux subtracted in 200 components = 0.00353623 Jy ! Clean residual min=-0.013532 max=0.014624 Jy/beam ! Clean residual mean=0.000186 rms=0.004057 Jy/beam ! Combined flux in latest and established models = 0.614578 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265869 Jy ! Component: 100 - total flux cleaned = 3.19957e-05 Jy ! Component: 150 - total flux cleaned = 3.64879e-05 Jy ! Component: 200 - total flux cleaned = 4.93262e-05 Jy ! Total flux subtracted in 200 components = 4.93262e-05 Jy ! Clean residual min=-0.013584 max=0.015223 Jy/beam ! Clean residual mean=0.000181 rms=0.003904 Jy/beam ! Combined flux in latest and established models = 0.614627 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 151 components and 0.614627 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=9.253 mas, bpa=-7.848 degrees ! Estimated noise=4639.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000341995 Jy ! Component: 100 - total flux cleaned = 0.000701476 Jy ! Component: 150 - total flux cleaned = 0.00100011 Jy ! Component: 200 - total flux cleaned = 0.00127961 Jy ! Total flux subtracted in 200 components = 0.00127961 Jy ! Clean residual min=-0.014936 max=0.013668 Jy/beam ! Clean residual mean=0.000099 rms=0.003496 Jy/beam ! Combined flux in latest and established models = 0.615907 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 173 components and 0.615907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.376601Jy sigma=0.000665 ! Fit after self-cal, rms=0.375638Jy sigma=0.000664 wmodel J1454-4012_S_2017_05_27_pus_map.mod ! Writing 173 model components to file: J1454-4012_S_2017_05_27_pus_map.mod wobs J1454-4012_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1454-4012_S_2017_05_27_pus_uvs.fits wwins J1454-4012_S_2017_05_27_pus_map.win ! wwins: Wrote 5 windows to J1454-4012_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0042167 Jy ! Component: 100 - total flux cleaned = -0.00492123 Jy ! Component: 150 - total flux cleaned = -0.00492781 Jy ! Component: 200 - total flux cleaned = -0.00553772 Jy ! Component: 250 - total flux cleaned = -0.00667996 Jy ! Component: 300 - total flux cleaned = -0.00667986 Jy ! Component: 350 - total flux cleaned = -0.00668034 Jy ! Component: 400 - total flux cleaned = -0.00702205 Jy ! Component: 450 - total flux cleaned = -0.0076817 Jy ! Component: 500 - total flux cleaned = -0.00832125 Jy ! Component: 550 - total flux cleaned = -0.00909853 Jy ! Component: 600 - total flux cleaned = -0.0100052 Jy ! Component: 650 - total flux cleaned = -0.0102975 Jy ! Component: 700 - total flux cleaned = -0.0105881 Jy ! Component: 750 - total flux cleaned = -0.0110104 Jy ! Component: 800 - total flux cleaned = -0.0114269 Jy ! Component: 850 - total flux cleaned = -0.0119691 Jy ! Component: 900 - total flux cleaned = -0.012103 Jy ! Component: 950 - total flux cleaned = -0.0123676 Jy ! Component: 1000 - total flux cleaned = -0.0122394 Jy ! Component: 1050 - total flux cleaned = -0.0124945 Jy ! Component: 1100 - total flux cleaned = -0.0124948 Jy ! Component: 1150 - total flux cleaned = -0.0127423 Jy ! Component: 1200 - total flux cleaned = -0.0127426 Jy ! Component: 1250 - total flux cleaned = -0.0131056 Jy ! Component: 1300 - total flux cleaned = -0.0131042 Jy ! Component: 1350 - total flux cleaned = -0.0133405 Jy ! Component: 1400 - total flux cleaned = -0.0131066 Jy ! Component: 1450 - total flux cleaned = -0.0134541 Jy ! Component: 1500 - total flux cleaned = -0.0133393 Jy ! Component: 1550 - total flux cleaned = -0.0135676 Jy ! Component: 1600 - total flux cleaned = -0.0137916 Jy ! Component: 1650 - total flux cleaned = -0.0140139 Jy ! Component: 1700 - total flux cleaned = -0.0140137 Jy ! Component: 1750 - total flux cleaned = -0.0140135 Jy ! Component: 1800 - total flux cleaned = -0.0140139 Jy ! Component: 1850 - total flux cleaned = -0.0139078 Jy ! Component: 1900 - total flux cleaned = -0.0141204 Jy ! Component: 1950 - total flux cleaned = -0.0142253 Jy ! Component: 2000 - total flux cleaned = -0.0143305 Jy ! Component: 2050 - total flux cleaned = -0.0146407 Jy ! Component: 2100 - total flux cleaned = -0.0143336 Jy ! Component: 2150 - total flux cleaned = -0.0141317 Jy ! Component: 2200 - total flux cleaned = -0.0139317 Jy ! Component: 2250 - total flux cleaned = -0.0141313 Jy ! Component: 2300 - total flux cleaned = -0.0138332 Jy ! Component: 2350 - total flux cleaned = -0.0134393 Jy ! Component: 2400 - total flux cleaned = -0.0132449 Jy ! Component: 2450 - total flux cleaned = -0.0130509 Jy ! Component: 2500 - total flux cleaned = -0.0128585 Jy ! Component: 2550 - total flux cleaned = -0.0125702 Jy ! Component: 2600 - total flux cleaned = -0.0121893 Jy ! Component: 2650 - total flux cleaned = -0.011811 Jy ! Component: 2700 - total flux cleaned = -0.011435 Jy ! Component: 2750 - total flux cleaned = -0.011156 Jy ! Component: 2800 - total flux cleaned = -0.0108775 Jy ! Component: 2850 - total flux cleaned = -0.0105079 Jy ! Component: 2900 - total flux cleaned = -0.0101403 Jy ! Component: 2950 - total flux cleaned = -0.0096836 Jy ! Component: 3000 - total flux cleaned = -0.00913878 Jy ! Component: 3050 - total flux cleaned = -0.00868756 Jy ! Component: 3100 - total flux cleaned = -0.00823785 Jy ! Component: 3150 - total flux cleaned = -0.00778931 Jy ! Component: 3200 - total flux cleaned = -0.00725379 Jy ! Component: 3250 - total flux cleaned = -0.00680947 Jy ! Component: 3300 - total flux cleaned = -0.00636624 Jy ! Component: 3350 - total flux cleaned = -0.00601296 Jy ! Component: 3400 - total flux cleaned = -0.0054852 Jy ! Component: 3450 - total flux cleaned = -0.00513443 Jy ! Component: 3500 - total flux cleaned = -0.00478451 Jy ! Component: 3550 - total flux cleaned = -0.00461001 Jy ! Component: 3600 - total flux cleaned = -0.00417393 Jy ! Component: 3650 - total flux cleaned = -0.00382601 Jy ! Component: 3700 - total flux cleaned = -0.00347955 Jy ! Component: 3750 - total flux cleaned = -0.00278799 Jy ! Component: 3800 - total flux cleaned = -0.00270148 Jy ! Component: 3850 - total flux cleaned = -0.00201223 Jy ! Component: 3900 - total flux cleaned = -0.00175414 Jy ! Component: 3950 - total flux cleaned = -0.00123839 Jy ! Component: 4000 - total flux cleaned = -0.000809221 Jy ! Component: 4050 - total flux cleaned = -0.000723478 Jy ! Total flux subtracted in 4096 components = -0.000208703 Jy ! Clean residual min=-0.004879 max=0.005669 Jy/beam ! Clean residual mean=0.000035 rms=0.001567 Jy/beam ! Combined flux in latest and established models = 0.615698 Jy keep ! Adding 214 model components to the UV plane model. ! The established model now contains 387 components and 0.615698 Jy ![Exited script file: muppet] wmap "J1454-4012_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.32 x 9.253 at -7.848 degrees (North through East) ! Clean map min=-0.032397 max=0.24727 Jy/beam ! Writing clean map to FITS file: J1454-4012_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.247266 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.001524 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.84902 1.84902 3.69805 7.3961 14.7922 29.5844 59.1688 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0045 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.247 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.32 x 9.253 at -7.848 degrees (North through East) ! Clean map min=-0.032397 max=0.24727 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1454-4012_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:09:39 2019