! Started logfile: J1454-4012_S_2017_04_28_pus_uvs.log on Thu May 2 16:28:08 2019 obs J1454-4012_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1454-4012_S_2017_04_28_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.295556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1454-4012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 532 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1454-4012_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.591895Jy sigma=0.003496 ! Fit after self-cal, rms=0.583490Jy sigma=0.003444 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.765 mas, bmaj=32.41 mas, bpa=-8.935 degrees ! Estimated noise=9099.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.285389 Jy ! Component: 100 - total flux cleaned = 0.431703 Jy ! Total flux subtracted in 100 components = 0.431703 Jy ! Clean residual min=-0.037553 max=0.069939 Jy/beam ! Clean residual mean=-0.000554 rms=0.019550 Jy/beam ! Combined flux in latest and established models = 0.431703 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.431703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218740Jy sigma=0.001174 ! Fit after self-cal, rms=0.217644Jy sigma=0.001169 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.159 mas, bmaj=31.3 mas, bpa=-7.575 degrees ! Estimated noise=6490.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124342 Jy ! Component: 100 - total flux cleaned = 0.182221 Jy ! Component: 150 - total flux cleaned = 0.191173 Jy ! Component: 200 - total flux cleaned = 0.181138 Jy ! Total flux subtracted in 200 components = 0.181138 Jy ! Clean residual min=-0.016823 max=0.016920 Jy/beam ! Clean residual mean=-0.000188 rms=0.006682 Jy/beam ! Combined flux in latest and established models = 0.612841 Jy ! Performing phase self-cal ! Adding 91 model components to the UV plane model. ! The established model now contains 110 components and 0.612841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126723Jy sigma=0.000690 ! Fit after self-cal, rms=0.125598Jy sigma=0.000687 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.03 ! LA 1.00 MK 1.21 NL 1.00* OV 1.05 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.00* KP 0.99 ! LA 0.94 MK 0.94 NL 1.00* OV 1.02 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00* KP 1.03 ! LA 0.99 MK 1.05 NL 1.00* OV 1.00 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.125598Jy sigma=0.000687 ! Fit after self-cal, rms=0.121749Jy sigma=0.000666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.45 mas, bmaj=30.43 mas, bpa=-7.267 degrees ! Estimated noise=6737.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129631 Jy ! Component: 100 - total flux cleaned = 0.00772729 Jy ! Component: 150 - total flux cleaned = 0.0136603 Jy ! Component: 200 - total flux cleaned = 0.0158392 Jy ! Total flux subtracted in 200 components = 0.0158392 Jy ! Clean residual min=-0.004796 max=0.004806 Jy/beam ! Clean residual mean=0.000021 rms=0.001842 Jy/beam ! Combined flux in latest and established models = 0.62868 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 151 components and 0.62868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118937Jy sigma=0.000651 ! Fit after self-cal, rms=0.118690Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118690Jy sigma=0.000650 ! Fit after self-cal, rms=0.116958Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.385 mas, bmaj=30.39 mas, bpa=-7.353 degrees ! Estimated noise=6670.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212449 Jy ! Component: 100 - total flux cleaned = 0.00284424 Jy ! Component: 150 - total flux cleaned = 0.00352551 Jy ! Component: 200 - total flux cleaned = 0.00374263 Jy ! Total flux subtracted in 200 components = 0.00374263 Jy ! Clean residual min=-0.003473 max=0.003506 Jy/beam ! Clean residual mean=-0.000003 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 0.632423 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 191 components and 0.632423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116104Jy sigma=0.000645 ! Fit after self-cal, rms=0.116063Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115169 Jy ! Component: 100 - total flux cleaned = -0.00106155 Jy ! Component: 150 - total flux cleaned = -0.00237258 Jy ! Component: 200 - total flux cleaned = -0.00382683 Jy ! Total flux subtracted in 200 components = -0.00382683 Jy ! Clean residual min=-0.002960 max=0.002959 Jy/beam ! Clean residual mean=-0.000010 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.628596 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 227 components and 0.628596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115563Jy sigma=0.000641 ! Fit after self-cal, rms=0.115547Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115547Jy sigma=0.000641 ! Fit after self-cal, rms=0.115029Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.351 mas, bmaj=30.38 mas, bpa=-7.398 degrees ! Estimated noise=6632.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00099497 Jy ! Component: 100 - total flux cleaned = 0.000360479 Jy ! Component: 150 - total flux cleaned = -0.000717264 Jy ! Component: 200 - total flux cleaned = -0.00163649 Jy ! Total flux subtracted in 200 components = -0.00163649 Jy ! Clean residual min=-0.002563 max=0.002613 Jy/beam ! Clean residual mean=-0.000014 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 0.62696 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 268 components and 0.62696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114681Jy sigma=0.000639 ! Fit after self-cal, rms=0.114684Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000521681 Jy ! Component: 100 - total flux cleaned = 0.000111912 Jy ! Component: 150 - total flux cleaned = -0.00105447 Jy ! Component: 200 - total flux cleaned = -0.00205448 Jy ! Total flux subtracted in 200 components = -0.00205448 Jy ! Clean residual min=-0.002053 max=0.002050 Jy/beam ! Clean residual mean=-0.000005 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.624905 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 296 components and 0.624905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114443Jy sigma=0.000637 ! Fit after self-cal, rms=0.114445Jy sigma=0.000637 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114445Jy sigma=0.000637 ! Fit after self-cal, rms=0.114372Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.58 mas, bmaj=46.06 mas, bpa=9.199 degrees ! Estimated noise=7454.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000539468 Jy ! Component: 100 - total flux cleaned = -0.000548663 Jy ! Component: 150 - total flux cleaned = -0.000635621 Jy ! Component: 200 - total flux cleaned = -0.000482641 Jy ! Total flux subtracted in 200 components = -0.000482641 Jy ! Clean residual min=-0.001311 max=0.001305 Jy/beam ! Clean residual mean=0.000012 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.624422 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 332 components and 0.624422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114239Jy sigma=0.000636 ! Fit after self-cal, rms=0.114243Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269587 Jy ! Component: 100 - total flux cleaned = 0.000257167 Jy ! Component: 150 - total flux cleaned = 0.000122654 Jy ! Component: 200 - total flux cleaned = -5.5679e-06 Jy ! Total flux subtracted in 200 components = -5.5679e-06 Jy ! Clean residual min=-0.001071 max=0.001069 Jy/beam ! Clean residual mean=0.000006 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.624417 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 352 components and 0.624417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114158Jy sigma=0.000635 ! Fit after self-cal, rms=0.114166Jy sigma=0.000635 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.331 mas, bmaj=30.36 mas, bpa=-7.422 degrees ! Estimated noise=6608.29 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.331 x 30.36 at -7.422 degrees (North through East) ! Clean map min=-0.010932 max=0.27751 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=31.24 mas, bpa=-9.083 degrees ! Estimated noise=8955.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.293634 Jy ! Component: 100 - total flux cleaned = 0.441321 Jy ! Component: 150 - total flux cleaned = 0.519222 Jy ! Component: 200 - total flux cleaned = 0.549874 Jy ! Total flux subtracted in 200 components = 0.549874 Jy ! Clean residual min=-0.028815 max=0.029073 Jy/beam ! Clean residual mean=-0.000046 rms=0.010224 Jy/beam ! Combined flux in latest and established models = 0.549874 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 75 model components to the UV plane model. ! The established model now contains 75 components and 0.549874 Jy ! Inverting map and beam ! Estimated beam: bmin=4.331 mas, bmaj=30.36 mas, bpa=-7.422 degrees ! Estimated noise=6608.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.050669 Jy ! Component: 100 - total flux cleaned = 0.0669531 Jy ! Component: 150 - total flux cleaned = 0.0616875 Jy ! Component: 200 - total flux cleaned = 0.0554691 Jy ! Total flux subtracted in 200 components = 0.0554691 Jy ! Clean residual min=-0.009434 max=0.009427 Jy/beam ! Clean residual mean=0.000042 rms=0.003820 Jy/beam ! Combined flux in latest and established models = 0.605343 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 145 components and 0.605343 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.58 mas, bmaj=46.06 mas, bpa=9.199 degrees ! Estimated noise=7454.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00745229 Jy ! Component: 100 - total flux cleaned = 0.00518595 Jy ! Component: 150 - total flux cleaned = 0.00487048 Jy ! Component: 200 - total flux cleaned = 0.00620354 Jy ! Total flux subtracted in 200 components = 0.00620354 Jy ! Clean residual min=-0.003432 max=0.003439 Jy/beam ! Clean residual mean=0.000041 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.611547 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000191948 Jy ! Component: 100 - total flux cleaned = 0.000965473 Jy ! Component: 150 - total flux cleaned = 0.00154347 Jy ! Component: 200 - total flux cleaned = 0.000728626 Jy ! Total flux subtracted in 200 components = 0.000728626 Jy ! Clean residual min=-0.003432 max=0.003520 Jy/beam ! Clean residual mean=0.000075 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.612275 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 232 components and 0.612276 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.331 mas, bmaj=30.36 mas, bpa=-7.422 degrees ! Estimated noise=6608.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293701 Jy ! Component: 100 - total flux cleaned = 0.00294134 Jy ! Component: 150 - total flux cleaned = 0.00314154 Jy ! Component: 200 - total flux cleaned = 0.00206179 Jy ! Total flux subtracted in 200 components = 0.00206179 Jy ! Clean residual min=-0.002888 max=0.002904 Jy/beam ! Clean residual mean=0.000029 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.614337 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 272 components and 0.614337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114996Jy sigma=0.000640 ! Fit after self-cal, rms=0.114853Jy sigma=0.000639 wmodel J1454-4012_S_2017_04_28_pus_map.mod ! Writing 272 model components to file: J1454-4012_S_2017_04_28_pus_map.mod wobs J1454-4012_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1454-4012_S_2017_04_28_pus_uvs.fits wwins J1454-4012_S_2017_04_28_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1454-4012_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.331 x 30.36 at -7.422 degrees (North through East) ! Clean map min=-0.016091 max=0.25652 Jy/beam ! Writing clean map to FITS file: J1454-4012_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.256519 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00101705 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.18944 1.18944 2.37888 4.75775 9.5155 19.031 38.062 76.124 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.256 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.331 x 30.36 at -7.422 degrees (North through East) ! Clean map min=-0.016091 max=0.25652 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1454-4012_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:28:11 2019