! Started logfile: J1454-4012_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:43:44 2019 obs J1454-4012_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1454-4012_S_2017_03_27_pus_uva.fits ! AN table 1: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1454-4012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 784 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1454-4012_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.745820Jy sigma=0.004513 ! Fit after self-cal, rms=0.737501Jy sigma=0.004471 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=7.122 mas, bpa=0.2179 degrees ! Estimated noise=5726.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.222326 Jy ! Component: 100 - total flux cleaned = 0.332079 Jy ! Total flux subtracted in 100 components = 0.332079 Jy ! Clean residual min=-0.037312 max=0.068333 Jy/beam ! Clean residual mean=-0.002745 rms=0.016645 Jy/beam ! Combined flux in latest and established models = 0.332079 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.332079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189749Jy sigma=0.001171 ! Fit after self-cal, rms=0.188950Jy sigma=0.001166 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.738 mas, bmaj=7.751 mas, bpa=1.147 degrees ! Estimated noise=5064.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0918256 Jy ! Component: 100 - total flux cleaned = 0.13854 Jy ! Component: 150 - total flux cleaned = 0.162791 Jy ! Component: 200 - total flux cleaned = 0.175436 Jy ! Total flux subtracted in 200 components = 0.175436 Jy ! Clean residual min=-0.029250 max=0.049519 Jy/beam ! Clean residual mean=-0.001291 rms=0.010469 Jy/beam ! Combined flux in latest and established models = 0.507515 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 61 components and 0.507515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150269Jy sigma=0.000830 ! Fit after self-cal, rms=0.150067Jy sigma=0.000828 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00* KP 1.04 ! LA 0.91 MK 1.19 NL 1.00* OV 1.26 ! PT 0.86 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 0.96 ! LA 0.92 MK 1.05 NL 1.00* OV 1.32 ! PT 0.86 SC 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.94 ! LA 0.88 MK 1.00 NL 2.36 OV 1.19 ! PT 0.84 SC 1.03 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.150067Jy sigma=0.000828 ! Fit after self-cal, rms=0.187521Jy sigma=0.000687 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.78 mas, bmaj=7.805 mas, bpa=3.248 degrees ! Estimated noise=5235.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111363 Jy ! Component: 100 - total flux cleaned = -0.00111003 Jy ! Component: 150 - total flux cleaned = -0.00124547 Jy ! Component: 200 - total flux cleaned = -0.00124065 Jy ! Total flux subtracted in 200 components = -0.00124065 Jy ! Clean residual min=-0.015845 max=0.023168 Jy/beam ! Clean residual mean=-0.000008 rms=0.005833 Jy/beam ! Combined flux in latest and established models = 0.506274 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 0.506274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187134Jy sigma=0.000685 ! Fit after self-cal, rms=0.188288Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188288Jy sigma=0.000684 ! Fit after self-cal, rms=0.186965Jy sigma=0.000683 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.755 mas, bmaj=7.757 mas, bpa=3.609 degrees ! Estimated noise=5151.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000547149 Jy ! Component: 100 - total flux cleaned = -0.00082503 Jy ! Component: 150 - total flux cleaned = -0.000944289 Jy ! Component: 200 - total flux cleaned = -0.00106863 Jy ! Total flux subtracted in 200 components = -0.00106863 Jy ! Clean residual min=-0.015335 max=0.022411 Jy/beam ! Clean residual mean=0.000004 rms=0.005716 Jy/beam ! Combined flux in latest and established models = 0.505206 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 0.505206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186618Jy sigma=0.000682 ! Fit after self-cal, rms=0.186656Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000294228 Jy ! Component: 100 - total flux cleaned = -0.000159874 Jy ! Component: 150 - total flux cleaned = -4.27477e-05 Jy ! Component: 200 - total flux cleaned = -4.44459e-05 Jy ! Total flux subtracted in 200 components = -4.44459e-05 Jy ! Clean residual min=-0.015411 max=0.022077 Jy/beam ! Clean residual mean=0.000004 rms=0.005681 Jy/beam ! Combined flux in latest and established models = 0.505161 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 72 components and 0.505161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186430Jy sigma=0.000681 ! Fit after self-cal, rms=0.186461Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186461Jy sigma=0.000681 ! Fit after self-cal, rms=0.184478Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.731 mas, bmaj=7.711 mas, bpa=3.995 degrees ! Estimated noise=5066.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00070068 Jy ! Component: 100 - total flux cleaned = -0.000808072 Jy ! Component: 150 - total flux cleaned = -0.000897993 Jy ! Component: 200 - total flux cleaned = -0.000989488 Jy ! Total flux subtracted in 200 components = -0.000989488 Jy ! Clean residual min=-0.015216 max=0.021225 Jy/beam ! Clean residual mean=0.000007 rms=0.005548 Jy/beam ! Combined flux in latest and established models = 0.504172 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 0.504172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184211Jy sigma=0.000680 ! Fit after self-cal, rms=0.184244Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142351 Jy ! Component: 100 - total flux cleaned = -4.48804e-05 Jy ! Component: 150 - total flux cleaned = 4.67685e-05 Jy ! Component: 200 - total flux cleaned = 4.08055e-05 Jy ! Total flux subtracted in 200 components = 4.08055e-05 Jy ! Clean residual min=-0.015294 max=0.020839 Jy/beam ! Clean residual mean=0.000007 rms=0.005524 Jy/beam ! Combined flux in latest and established models = 0.504213 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 76 components and 0.504212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184085Jy sigma=0.000679 ! Fit after self-cal, rms=0.184112Jy sigma=0.000679 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184112Jy sigma=0.000679 ! Fit after self-cal, rms=0.182375Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.932 mas, bmaj=29.82 mas, bpa=6.669 degrees ! Estimated noise=6868.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343824 Jy ! Component: 100 - total flux cleaned = 0.00351629 Jy ! Component: 150 - total flux cleaned = 0.00359921 Jy ! Component: 200 - total flux cleaned = 0.00367525 Jy ! Total flux subtracted in 200 components = 0.00367525 Jy ! Clean residual min=-0.020897 max=0.028388 Jy/beam ! Clean residual mean=0.000114 rms=0.009351 Jy/beam ! Combined flux in latest and established models = 0.507888 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 76 components and 0.507888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182187Jy sigma=0.000679 ! Fit after self-cal, rms=0.182205Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.60369e-05 Jy ! Component: 100 - total flux cleaned = 0.000170186 Jy ! Component: 150 - total flux cleaned = 0.000250171 Jy ! Component: 200 - total flux cleaned = 0.000399045 Jy ! Total flux subtracted in 200 components = 0.000399045 Jy ! Clean residual min=-0.020949 max=0.028353 Jy/beam ! Clean residual mean=0.000124 rms=0.009338 Jy/beam ! Combined flux in latest and established models = 0.508287 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 76 components and 0.508287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182026Jy sigma=0.000679 ! Fit after self-cal, rms=0.182054Jy sigma=0.000679 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.709 mas, bmaj=7.673 mas, bpa=4.343 degrees ! Estimated noise=4989.97 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.709 x 7.673 at 4.343 degrees (North through East) ! Clean map min=-0.014427 max=0.18687 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.377 mas, bmaj=7.023 mas, bpa=2.783 degrees ! Estimated noise=5747.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.22391 Jy ! Component: 100 - total flux cleaned = 0.337368 Jy ! Component: 150 - total flux cleaned = 0.40338 Jy ! Component: 200 - total flux cleaned = 0.442579 Jy ! Total flux subtracted in 200 components = 0.442579 Jy ! Clean residual min=-0.019192 max=0.027655 Jy/beam ! Clean residual mean=-0.000580 rms=0.006421 Jy/beam ! Combined flux in latest and established models = 0.442579 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.442579 Jy ! Inverting map and beam ! Estimated beam: bmin=2.709 mas, bmaj=7.673 mas, bpa=4.343 degrees ! Estimated noise=4989.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0303952 Jy ! Component: 100 - total flux cleaned = 0.0458901 Jy ! Component: 150 - total flux cleaned = 0.0538445 Jy ! Component: 200 - total flux cleaned = 0.0571869 Jy ! Total flux subtracted in 200 components = 0.0571869 Jy ! Clean residual min=-0.014979 max=0.021302 Jy/beam ! Clean residual mean=-0.000027 rms=0.005584 Jy/beam ! Combined flux in latest and established models = 0.499766 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 49 components and 0.499766 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.932 mas, bmaj=29.82 mas, bpa=6.669 degrees ! Estimated noise=6868.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00582109 Jy ! Component: 100 - total flux cleaned = 0.00650326 Jy ! Component: 150 - total flux cleaned = 0.00658913 Jy ! Component: 200 - total flux cleaned = 0.0067533 Jy ! Total flux subtracted in 200 components = 0.0067533 Jy ! Clean residual min=-0.020739 max=0.028686 Jy/beam ! Clean residual mean=0.000082 rms=0.009440 Jy/beam ! Combined flux in latest and established models = 0.506519 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.2187e-05 Jy ! Component: 100 - total flux cleaned = 0.000160652 Jy ! Component: 150 - total flux cleaned = 0.000238917 Jy ! Component: 200 - total flux cleaned = 0.000398194 Jy ! Total flux subtracted in 200 components = 0.000398194 Jy ! Clean residual min=-0.020786 max=0.028638 Jy/beam ! Clean residual mean=0.000091 rms=0.009425 Jy/beam ! Combined flux in latest and established models = 0.506917 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.506917 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.709 mas, bmaj=7.673 mas, bpa=4.343 degrees ! Estimated noise=4989.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00454332 Jy ! Component: 100 - total flux cleaned = -0.0046799 Jy ! Component: 150 - total flux cleaned = -0.00468288 Jy ! Component: 200 - total flux cleaned = -0.00457293 Jy ! Total flux subtracted in 200 components = -0.00457293 Jy ! Clean residual min=-0.014654 max=0.021111 Jy/beam ! Clean residual mean=-0.000001 rms=0.005508 Jy/beam ! Combined flux in latest and established models = 0.502344 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 62 components and 0.502344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182725Jy sigma=0.000681 ! Fit after self-cal, rms=0.182710Jy sigma=0.000681 wmodel J1454-4012_S_2017_03_27_pus_map.mod ! Writing 62 model components to file: J1454-4012_S_2017_03_27_pus_map.mod wobs J1454-4012_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1454-4012_S_2017_03_27_pus_uvs.fits wwins J1454-4012_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J1454-4012_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00930085 Jy ! Component: 100 - total flux cleaned = 0.017159 Jy ! Component: 150 - total flux cleaned = 0.020784 Jy ! Component: 200 - total flux cleaned = 0.0235815 Jy ! Component: 250 - total flux cleaned = 0.0268902 Jy ! Component: 300 - total flux cleaned = 0.0299775 Jy ! Component: 350 - total flux cleaned = 0.0324549 Jy ! Component: 400 - total flux cleaned = 0.0347918 Jy ! Component: 450 - total flux cleaned = 0.0366285 Jy ! Component: 500 - total flux cleaned = 0.038368 Jy ! Component: 550 - total flux cleaned = 0.0398651 Jy ! Component: 600 - total flux cleaned = 0.0409764 Jy ! Component: 650 - total flux cleaned = 0.0412836 Jy ! Component: 700 - total flux cleaned = 0.0418683 Jy ! Component: 750 - total flux cleaned = 0.0420068 Jy ! Component: 800 - total flux cleaned = 0.0422794 Jy ! Component: 850 - total flux cleaned = 0.0424139 Jy ! Component: 900 - total flux cleaned = 0.0424148 Jy ! Component: 950 - total flux cleaned = 0.0425411 Jy ! Component: 1000 - total flux cleaned = 0.0427844 Jy ! Component: 1050 - total flux cleaned = 0.0430229 Jy ! Component: 1100 - total flux cleaned = 0.0433756 Jy ! Component: 1150 - total flux cleaned = 0.0438374 Jy ! Component: 1200 - total flux cleaned = 0.0440651 Jy ! Component: 1250 - total flux cleaned = 0.0442902 Jy ! Component: 1300 - total flux cleaned = 0.0445131 Jy ! Component: 1350 - total flux cleaned = 0.044623 Jy ! Component: 1400 - total flux cleaned = 0.0448417 Jy ! Component: 1450 - total flux cleaned = 0.0449505 Jy ! Component: 1500 - total flux cleaned = 0.0450596 Jy ! Component: 1550 - total flux cleaned = 0.0451676 Jy ! Component: 1600 - total flux cleaned = 0.0451676 Jy ! Component: 1650 - total flux cleaned = 0.045167 Jy ! Component: 1700 - total flux cleaned = 0.0450602 Jy ! Component: 1750 - total flux cleaned = 0.0449552 Jy ! Component: 1800 - total flux cleaned = 0.0451669 Jy ! Component: 1850 - total flux cleaned = 0.0450617 Jy ! Component: 1900 - total flux cleaned = 0.0449568 Jy ! Component: 1950 - total flux cleaned = 0.0446407 Jy ! Component: 2000 - total flux cleaned = 0.0443243 Jy ! Component: 2050 - total flux cleaned = 0.0439006 Jy ! Component: 2100 - total flux cleaned = 0.0433696 Jy ! Component: 2150 - total flux cleaned = 0.0429429 Jy ! Component: 2200 - total flux cleaned = 0.0424031 Jy ! Component: 2250 - total flux cleaned = 0.0421836 Jy ! Component: 2300 - total flux cleaned = 0.0418505 Jy ! Component: 2350 - total flux cleaned = 0.0413976 Jy ! Component: 2400 - total flux cleaned = 0.0410501 Jy ! Component: 2450 - total flux cleaned = 0.0406953 Jy ! Component: 2500 - total flux cleaned = 0.0402153 Jy ! Component: 2550 - total flux cleaned = 0.0398483 Jy ! Component: 2600 - total flux cleaned = 0.0393476 Jy ! Component: 2650 - total flux cleaned = 0.0390935 Jy ! Component: 2700 - total flux cleaned = 0.0385728 Jy ! Component: 2750 - total flux cleaned = 0.0381719 Jy ! Component: 2800 - total flux cleaned = 0.0377628 Jy ! Component: 2850 - total flux cleaned = 0.0372032 Jy ! Component: 2900 - total flux cleaned = 0.036773 Jy ! Component: 2950 - total flux cleaned = 0.036186 Jy ! Component: 3000 - total flux cleaned = 0.0357329 Jy ! Component: 3050 - total flux cleaned = 0.0354242 Jy ! Component: 3100 - total flux cleaned = 0.0349467 Jy ! Component: 3150 - total flux cleaned = 0.0346175 Jy ! Component: 3200 - total flux cleaned = 0.0344492 Jy ! Component: 3250 - total flux cleaned = 0.0339375 Jy ! Component: 3300 - total flux cleaned = 0.0334076 Jy ! Component: 3350 - total flux cleaned = 0.0330445 Jy ! Component: 3400 - total flux cleaned = 0.0326732 Jy ! Component: 3450 - total flux cleaned = 0.0322943 Jy ! Component: 3500 - total flux cleaned = 0.0317083 Jy ! Component: 3550 - total flux cleaned = 0.0311053 Jy ! Component: 3600 - total flux cleaned = 0.030694 Jy ! Component: 3650 - total flux cleaned = 0.0300579 Jy ! Component: 3700 - total flux cleaned = 0.0294055 Jy ! Component: 3750 - total flux cleaned = 0.0289591 Jy ! Component: 3800 - total flux cleaned = 0.0282735 Jy ! Component: 3850 - total flux cleaned = 0.0275658 Jy ! Component: 3900 - total flux cleaned = 0.0270797 Jy ! Component: 3950 - total flux cleaned = 0.0263336 Jy ! Component: 4000 - total flux cleaned = 0.0255617 Jy ! Component: 4050 - total flux cleaned = 0.0250354 Jy ! Total flux subtracted in 4096 components = 0.0242224 Jy ! Clean residual min=-0.017940 max=0.015494 Jy/beam ! Clean residual mean=0.000391 rms=0.003850 Jy/beam ! Combined flux in latest and established models = 0.526567 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 294 components and 0.526567 Jy ![Exited script file: muppet] wmap "J1454-4012_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.709 x 7.673 at 4.343 degrees (North through East) ! Clean map min=-0.024287 max=0.19223 Jy/beam ! Writing clean map to FITS file: J1454-4012_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.192231 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00427645 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -6.67391 6.67391 13.3478 26.6956 53.3913 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0128 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.192 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.709 x 7.673 at 4.343 degrees (North through East) ! Clean map min=-0.024287 max=0.19223 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1454-4012_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:43:47 2019