! Started logfile: J1454-3400_S_2017_05_27_pus_uvs.log on Fri May 3 11:09:30 2019 obs J1454-3400_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1454-3400_S_2017_05_27_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.54029 visibilities/baseline/integration-bin. ! Found source: J1454-3400 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 11184 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1454-3400_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 312 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 312 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 312 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 872 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.826514Jy sigma=0.006474 ! Fit after self-cal, rms=0.760082Jy sigma=0.006049 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=6.437 mas, bpa=-4.153 degrees ! Estimated noise=1853.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.198221 Jy ! Component: 100 - total flux cleaned = 0.296859 Jy ! Total flux subtracted in 100 components = 0.296859 Jy ! Clean residual min=-0.030090 max=0.074317 Jy/beam ! Clean residual mean=0.000118 rms=0.012602 Jy/beam ! Combined flux in latest and established models = 0.296859 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.296859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251859Jy sigma=0.001814 ! Fit after self-cal, rms=0.251155Jy sigma=0.001812 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.281 mas, bmaj=8.262 mas, bpa=-4.952 degrees ! Estimated noise=1303.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0979152 Jy ! Component: 100 - total flux cleaned = 0.144953 Jy ! Component: 150 - total flux cleaned = 0.168006 Jy ! Component: 200 - total flux cleaned = 0.173048 Jy ! Total flux subtracted in 200 components = 0.173048 Jy ! Clean residual min=-0.043448 max=0.057258 Jy/beam ! Clean residual mean=0.000038 rms=0.014318 Jy/beam ! Combined flux in latest and established models = 0.469907 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 41 components and 0.469907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211500Jy sigma=0.002149 ! Fit after self-cal, rms=0.210477Jy sigma=0.002148 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.73 HN 2.73 KP 0.91 ! LA 0.81 MK 1.06 NL 1.43 OV 1.01 ! PT 1.03 SC 1.27 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 4.26 HN 2.35 KP 0.87 ! LA 0.88 MK 1.06 NL 1.87 OV 1.03 ! PT 0.86 SC 1.23 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.83 HN 2.51 KP 0.88 ! LA 0.81 MK 1.07 NL 1.80 OV 0.95 ! PT 0.97 SC 1.32 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.74 HN 2.37 KP 1.00* ! LA 0.72 MK 1.02 NL 1.00* OV 1.00* ! PT 1.29 SC 1.00* ! ! ! Fit before self-cal, rms=0.210477Jy sigma=0.002148 ! Fit after self-cal, rms=0.598496Jy sigma=0.001103 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=8.402 mas, bpa=-6.273 degrees ! Estimated noise=1550.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0486805 Jy ! Component: 100 - total flux cleaned = 0.065685 Jy ! Component: 150 - total flux cleaned = 0.0668244 Jy ! Component: 200 - total flux cleaned = 0.0677383 Jy ! Total flux subtracted in 200 components = 0.0677383 Jy ! Clean residual min=-0.027311 max=0.031652 Jy/beam ! Clean residual mean=0.000457 rms=0.008650 Jy/beam ! Combined flux in latest and established models = 0.537645 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 0.537645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.586596Jy sigma=0.001116 ! Fit after self-cal, rms=0.588488Jy sigma=0.001110 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.588488Jy sigma=0.001110 ! Fit after self-cal, rms=0.642621Jy sigma=0.001042 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=7.951 mas, bpa=-7.297 degrees ! Estimated noise=1591.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0382378 Jy ! Component: 100 - total flux cleaned = 0.0566481 Jy ! Component: 150 - total flux cleaned = 0.0646268 Jy ! Component: 200 - total flux cleaned = 0.066048 Jy ! Total flux subtracted in 200 components = 0.066048 Jy ! Clean residual min=-0.030296 max=0.027537 Jy/beam ! Clean residual mean=0.000462 rms=0.008573 Jy/beam ! Combined flux in latest and established models = 0.603693 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 91 components and 0.603693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.633336Jy sigma=0.001054 ! Fit after self-cal, rms=0.631754Jy sigma=0.001051 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00658624 Jy ! Component: 100 - total flux cleaned = 0.00661753 Jy ! Component: 150 - total flux cleaned = 0.00633674 Jy ! Component: 200 - total flux cleaned = 0.00608633 Jy ! Total flux subtracted in 200 components = 0.00608633 Jy ! Clean residual min=-0.028684 max=0.027734 Jy/beam ! Clean residual mean=0.000467 rms=0.008411 Jy/beam ! Combined flux in latest and established models = 0.60978 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 109 components and 0.60978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.630678Jy sigma=0.001053 ! Fit after self-cal, rms=0.630416Jy sigma=0.001052 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.630416Jy sigma=0.001052 ! Fit after self-cal, rms=0.579699Jy sigma=0.000869 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=7.895 mas, bpa=-7.485 degrees ! Estimated noise=1601.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177906 Jy ! Component: 100 - total flux cleaned = 0.0231423 Jy ! Component: 150 - total flux cleaned = 0.0239235 Jy ! Component: 200 - total flux cleaned = 0.0243809 Jy ! Total flux subtracted in 200 components = 0.0243809 Jy ! Clean residual min=-0.021777 max=0.031943 Jy/beam ! Clean residual mean=0.000092 rms=0.007695 Jy/beam ! Combined flux in latest and established models = 0.634161 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 123 components and 0.634161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.576931Jy sigma=0.000871 ! Fit after self-cal, rms=0.576177Jy sigma=0.000868 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-99.5, 59.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0320559 Jy ! Component: 100 - total flux cleaned = 0.0478352 Jy ! Component: 150 - total flux cleaned = 0.0572826 Jy ! Component: 200 - total flux cleaned = 0.0627684 Jy ! Total flux subtracted in 200 components = 0.0627684 Jy ! Clean residual min=-0.015533 max=0.020386 Jy/beam ! Clean residual mean=0.000115 rms=0.005424 Jy/beam ! Combined flux in latest and established models = 0.696929 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 173 components and 0.696929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.572713Jy sigma=0.000844 ! Fit after self-cal, rms=0.572134Jy sigma=0.000840 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.572134Jy sigma=0.000840 ! Fit after self-cal, rms=0.613987Jy sigma=0.000829 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.982 mas, bmaj=25.09 mas, bpa=1.714 degrees ! Estimated noise=1904.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0277607 Jy ! Component: 100 - total flux cleaned = 0.0421041 Jy ! Component: 150 - total flux cleaned = 0.0497233 Jy ! Component: 200 - total flux cleaned = 0.0509894 Jy ! Total flux subtracted in 200 components = 0.0509894 Jy ! Clean residual min=-0.028811 max=0.026076 Jy/beam ! Clean residual mean=0.000175 rms=0.008949 Jy/beam ! Combined flux in latest and established models = 0.747918 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 191 components and 0.747918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.610394Jy sigma=0.000834 ! Fit after self-cal, rms=0.609886Jy sigma=0.000831 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00681689 Jy ! Component: 100 - total flux cleaned = 0.00706882 Jy ! Component: 150 - total flux cleaned = 0.00708695 Jy ! Component: 200 - total flux cleaned = 0.00709001 Jy ! Total flux subtracted in 200 components = 0.00709001 Jy ! Clean residual min=-0.028970 max=0.025287 Jy/beam ! Clean residual mean=0.000179 rms=0.008600 Jy/beam ! Combined flux in latest and established models = 0.755008 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 206 components and 0.755008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.608978Jy sigma=0.000835 ! Fit after self-cal, rms=0.608913Jy sigma=0.000835 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=7.804 mas, bpa=-7.394 degrees ! Estimated noise=1623.94 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.174 x 7.804 at -7.394 degrees (North through East) ! Clean map min=-0.018756 max=0.20351 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.506 mas, bmaj=6.15 mas, bpa=-6.438 degrees ! Estimated noise=2211.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.2422 Jy ! Component: 100 - total flux cleaned = 0.376521 Jy ! Component: 150 - total flux cleaned = 0.465093 Jy ! Component: 200 - total flux cleaned = 0.524727 Jy ! Total flux subtracted in 200 components = 0.524727 Jy ! Clean residual min=-0.023041 max=0.034800 Jy/beam ! Clean residual mean=0.000006 rms=0.007655 Jy/beam ! Combined flux in latest and established models = 0.524727 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 63 model components to the UV plane model. ! The established model now contains 63 components and 0.524727 Jy ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=7.804 mas, bpa=-7.394 degrees ! Estimated noise=1623.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.066638 Jy ! Component: 100 - total flux cleaned = 0.111496 Jy ! Component: 150 - total flux cleaned = 0.144155 Jy ! Component: 200 - total flux cleaned = 0.168269 Jy ! Total flux subtracted in 200 components = 0.168269 Jy ! Clean residual min=-0.019487 max=0.021579 Jy/beam ! Clean residual mean=0.000079 rms=0.006315 Jy/beam ! Combined flux in latest and established models = 0.692995 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 133 components and 0.692996 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.982 mas, bmaj=25.09 mas, bpa=1.714 degrees ! Estimated noise=1904.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.02966 Jy ! Component: 100 - total flux cleaned = 0.046964 Jy ! Component: 150 - total flux cleaned = 0.0564533 Jy ! Component: 200 - total flux cleaned = 0.0585879 Jy ! Total flux subtracted in 200 components = 0.0585879 Jy ! Clean residual min=-0.028975 max=0.027125 Jy/beam ! Clean residual mean=0.000183 rms=0.008617 Jy/beam ! Combined flux in latest and established models = 0.751583 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101597 Jy ! Component: 100 - total flux cleaned = 0.00146123 Jy ! Component: 150 - total flux cleaned = 0.00147566 Jy ! Component: 200 - total flux cleaned = 0.00130111 Jy ! Total flux subtracted in 200 components = 0.00130111 Jy ! Clean residual min=-0.028549 max=0.026604 Jy/beam ! Clean residual mean=0.000188 rms=0.008515 Jy/beam ! Combined flux in latest and established models = 0.752885 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 188 components and 0.752885 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=7.804 mas, bpa=-7.394 degrees ! Estimated noise=1623.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.83478e-05 Jy ! Component: 100 - total flux cleaned = -0.000361001 Jy ! Component: 150 - total flux cleaned = -0.00118283 Jy ! Component: 200 - total flux cleaned = -0.00117627 Jy ! Total flux subtracted in 200 components = -0.00117627 Jy ! Clean residual min=-0.018264 max=0.017997 Jy/beam ! Clean residual mean=0.000091 rms=0.005147 Jy/beam ! Combined flux in latest and established models = 0.751708 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 204 components and 0.751708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.608471Jy sigma=0.000834 ! Fit after self-cal, rms=0.608424Jy sigma=0.000833 wmodel J1454-3400_S_2017_05_27_pus_map.mod ! Writing 204 model components to file: J1454-3400_S_2017_05_27_pus_map.mod wobs J1454-3400_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1454-3400_S_2017_05_27_pus_uvs.fits wwins J1454-3400_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J1454-3400_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000192673 Jy ! Component: 100 - total flux cleaned = -0.00184902 Jy ! Component: 150 - total flux cleaned = -0.00316712 Jy ! Component: 200 - total flux cleaned = -0.00542368 Jy ! Component: 250 - total flux cleaned = -0.00706906 Jy ! Component: 300 - total flux cleaned = -0.00728911 Jy ! Component: 350 - total flux cleaned = -0.00707564 Jy ! Component: 400 - total flux cleaned = -0.00687398 Jy ! Component: 450 - total flux cleaned = -0.00668854 Jy ! Component: 500 - total flux cleaned = -0.00631637 Jy ! Component: 550 - total flux cleaned = -0.00631145 Jy ! Component: 600 - total flux cleaned = -0.00613836 Jy ! Component: 650 - total flux cleaned = -0.00564248 Jy ! Component: 700 - total flux cleaned = -0.00565014 Jy ! Component: 750 - total flux cleaned = -0.00472949 Jy ! Component: 800 - total flux cleaned = -0.0044375 Jy ! Component: 850 - total flux cleaned = -0.00415585 Jy ! Component: 900 - total flux cleaned = -0.00360283 Jy ! Component: 950 - total flux cleaned = -0.00360781 Jy ! Component: 1000 - total flux cleaned = -0.00374112 Jy ! Component: 1050 - total flux cleaned = -0.00437919 Jy ! Component: 1100 - total flux cleaned = -0.0046236 Jy ! Component: 1150 - total flux cleaned = -0.00498301 Jy ! Component: 1200 - total flux cleaned = -0.0056797 Jy ! Component: 1250 - total flux cleaned = -0.00624516 Jy ! Component: 1300 - total flux cleaned = -0.00691051 Jy ! Component: 1350 - total flux cleaned = -0.00787961 Jy ! Component: 1400 - total flux cleaned = -0.00819252 Jy ! Component: 1450 - total flux cleaned = -0.00881147 Jy ! Component: 1500 - total flux cleaned = -0.00961508 Jy ! Component: 1550 - total flux cleaned = -0.0100059 Jy ! Component: 1600 - total flux cleaned = -0.0101975 Jy ! Component: 1650 - total flux cleaned = -0.0104814 Jy ! Component: 1700 - total flux cleaned = -0.0108494 Jy ! Component: 1750 - total flux cleaned = -0.0108493 Jy ! Component: 1800 - total flux cleaned = -0.0110283 Jy ! Component: 1850 - total flux cleaned = -0.0116339 Jy ! Component: 1900 - total flux cleaned = -0.0116349 Jy ! Component: 1950 - total flux cleaned = -0.0120527 Jy ! Component: 2000 - total flux cleaned = -0.0124607 Jy ! Component: 2050 - total flux cleaned = -0.0127003 Jy ! Component: 2100 - total flux cleaned = -0.0130165 Jy ! Component: 2150 - total flux cleaned = -0.0135603 Jy ! Component: 2200 - total flux cleaned = -0.0139426 Jy ! Component: 2250 - total flux cleaned = -0.0144676 Jy ! Component: 2300 - total flux cleaned = -0.0148355 Jy ! Component: 2350 - total flux cleaned = -0.0150533 Jy ! Component: 2400 - total flux cleaned = -0.0152682 Jy ! Component: 2450 - total flux cleaned = -0.0153391 Jy ! Component: 2500 - total flux cleaned = -0.0155486 Jy ! Component: 2550 - total flux cleaned = -0.0158921 Jy ! Component: 2600 - total flux cleaned = -0.0158235 Jy ! Component: 2650 - total flux cleaned = -0.016026 Jy ! Component: 2700 - total flux cleaned = -0.0161591 Jy ! Component: 2750 - total flux cleaned = -0.0161594 Jy ! Component: 2800 - total flux cleaned = -0.0163546 Jy ! Component: 2850 - total flux cleaned = -0.0163552 Jy ! Component: 2900 - total flux cleaned = -0.0164827 Jy ! Component: 2950 - total flux cleaned = -0.0165466 Jy ! Component: 3000 - total flux cleaned = -0.0167967 Jy ! Component: 3050 - total flux cleaned = -0.0168583 Jy ! Component: 3100 - total flux cleaned = -0.0169196 Jy ! Component: 3150 - total flux cleaned = -0.0169798 Jy ! Component: 3200 - total flux cleaned = -0.0170398 Jy ! Component: 3250 - total flux cleaned = -0.0170993 Jy ! Component: 3300 - total flux cleaned = -0.0172172 Jy ! Component: 3350 - total flux cleaned = -0.0172749 Jy ! Component: 3400 - total flux cleaned = -0.017217 Jy ! Component: 3450 - total flux cleaned = -0.0172173 Jy ! Component: 3500 - total flux cleaned = -0.0173885 Jy ! Component: 3550 - total flux cleaned = -0.017445 Jy ! Component: 3600 - total flux cleaned = -0.0175013 Jy ! Component: 3650 - total flux cleaned = -0.0176133 Jy ! Component: 3700 - total flux cleaned = -0.0177244 Jy ! Component: 3750 - total flux cleaned = -0.0177798 Jy ! Component: 3800 - total flux cleaned = -0.0179993 Jy ! Component: 3850 - total flux cleaned = -0.0182178 Jy ! Component: 3900 - total flux cleaned = -0.0182723 Jy ! Component: 3950 - total flux cleaned = -0.0183805 Jy ! Component: 4000 - total flux cleaned = -0.0184884 Jy ! Component: 4050 - total flux cleaned = -0.0184883 Jy ! Total flux subtracted in 4096 components = -0.0187557 Jy ! Clean residual min=-0.003055 max=0.003232 Jy/beam ! Clean residual mean=-0.000008 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.732952 Jy keep ! Adding 398 model components to the UV plane model. ! The established model now contains 602 components and 0.732952 Jy ![Exited script file: muppet] wmap "J1454-3400_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.174 x 7.804 at -7.394 degrees (North through East) ! Clean map min=-0.01105 max=0.22196 Jy/beam ! Writing clean map to FITS file: J1454-3400_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.221958 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000984572 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.33075 1.33075 2.66151 5.32301 10.646 21.292 42.5841 85.1682 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.221 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.174 x 7.804 at -7.394 degrees (North through East) ! Clean map min=-0.01105 max=0.22196 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1454-3400_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:09:34 2019