! Started logfile: J1454-2505_S_2017_08_12_pus_uvs.log on Fri May 10 15:01:48 2019 obs J1454-2505_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1454-2505_S_2017_08_12_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.755556 visibilities/baseline/integration-bin. ! Found source: J1454-2505 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 15776 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1454-2505_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 268 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 243 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 908 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.954651Jy sigma=0.006578 ! Fit after self-cal, rms=0.927953Jy sigma=0.006427 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.309 mas, bmaj=6.656 mas, bpa=-2.31 degrees ! Estimated noise=1459.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0597329 Jy ! Component: 100 - total flux cleaned = 0.0731997 Jy ! Total flux subtracted in 100 components = 0.0731997 Jy ! Clean residual min=-0.004954 max=0.004903 Jy/beam ! Clean residual mean=-0.000034 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.0731997 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0731997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100458Jy sigma=0.000656 ! Fit after self-cal, rms=0.100262Jy sigma=0.000655 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=7.399 mas, bpa=-3.267 degrees ! Estimated noise=1029.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00678587 Jy ! Component: 100 - total flux cleaned = 0.0104 Jy ! Component: 150 - total flux cleaned = 0.0124928 Jy ! Component: 200 - total flux cleaned = 0.0136433 Jy ! Total flux subtracted in 200 components = 0.0136433 Jy ! Clean residual min=-0.003579 max=0.003783 Jy/beam ! Clean residual mean=-0.000028 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.0868429 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 22 components and 0.0868429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099830Jy sigma=0.000652 ! Fit after self-cal, rms=0.099805Jy sigma=0.000651 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.13 KP 0.97 ! LA 1.00 MK 1.00 NL 0.89 OV 1.06 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.23 KP 0.96 ! LA 0.93 MK 1.02 NL 1.06 OV 1.04 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.12 KP 0.92 ! LA 0.91 MK 1.05 NL 1.00 OV 1.04 ! PT 0.94 SC 1.08 ! ! ! Correcting IF 4. ! A total of 252 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.099805Jy sigma=0.000651 ! Fit after self-cal, rms=0.103148Jy sigma=0.000652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.75 mas, bmaj=7.45 mas, bpa=-2.288 degrees ! Estimated noise=1047.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.97219e-05 Jy ! Component: 100 - total flux cleaned = -2.99978e-05 Jy ! Component: 150 - total flux cleaned = -7.96074e-05 Jy ! Component: 200 - total flux cleaned = -8.06352e-05 Jy ! Total flux subtracted in 200 components = -8.06352e-05 Jy ! Clean residual min=-0.003384 max=0.003341 Jy/beam ! Clean residual mean=-0.000014 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.0867623 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.0867623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103131Jy sigma=0.000652 ! Fit after self-cal, rms=0.103245Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103245Jy sigma=0.000652 ! Fit after self-cal, rms=0.104157Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.757 mas, bmaj=7.457 mas, bpa=-2.26 degrees ! Estimated noise=1048.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.16408e-05 Jy ! Component: 100 - total flux cleaned = -2.06824e-05 Jy ! Component: 150 - total flux cleaned = -1.97132e-05 Jy ! Component: 200 - total flux cleaned = -1.94735e-05 Jy ! Total flux subtracted in 200 components = -1.94735e-05 Jy ! Clean residual min=-0.003370 max=0.003257 Jy/beam ! Clean residual mean=-0.000014 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.0867428 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.0867428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104147Jy sigma=0.000651 ! Fit after self-cal, rms=0.104185Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.18524e-05 Jy ! Component: 100 - total flux cleaned = 2.96241e-05 Jy ! Component: 150 - total flux cleaned = 2.90743e-05 Jy ! Component: 200 - total flux cleaned = 4.17544e-05 Jy ! Total flux subtracted in 200 components = 4.17544e-05 Jy ! Clean residual min=-0.003358 max=0.003242 Jy/beam ! Clean residual mean=-0.000014 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.0867845 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 0.0867846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104178Jy sigma=0.000651 ! Fit after self-cal, rms=0.104176Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104176Jy sigma=0.000651 ! Fit after self-cal, rms=0.104769Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.758 mas, bmaj=7.462 mas, bpa=-2.3 degrees ! Estimated noise=1047.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209945 Jy ! Component: 100 - total flux cleaned = -0.000208722 Jy ! Component: 150 - total flux cleaned = -0.000207595 Jy ! Component: 200 - total flux cleaned = -0.000208065 Jy ! Total flux subtracted in 200 components = -0.000208065 Jy ! Clean residual min=-0.003329 max=0.003206 Jy/beam ! Clean residual mean=-0.000014 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.0865765 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 40 components and 0.0865765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104763Jy sigma=0.000651 ! Fit after self-cal, rms=0.104791Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.31821e-05 Jy ! Component: 100 - total flux cleaned = -6.88005e-06 Jy ! Component: 150 - total flux cleaned = -6.41394e-06 Jy ! Component: 200 - total flux cleaned = 4.23613e-06 Jy ! Total flux subtracted in 200 components = 4.23613e-06 Jy ! Clean residual min=-0.003299 max=0.003208 Jy/beam ! Clean residual mean=-0.000015 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.0865807 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.0865807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104787Jy sigma=0.000651 ! Fit after self-cal, rms=0.104785Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104785Jy sigma=0.000651 ! Fit after self-cal, rms=0.104898Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.222 mas, bmaj=18.56 mas, bpa=-0.1569 degrees ! Estimated noise=1383.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000133446 Jy ! Component: 100 - total flux cleaned = 0.000138397 Jy ! Component: 150 - total flux cleaned = 0.000141311 Jy ! Component: 200 - total flux cleaned = 0.000143556 Jy ! Total flux subtracted in 200 components = 0.000143556 Jy ! Clean residual min=-0.003707 max=0.003479 Jy/beam ! Clean residual mean=-0.000032 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.0867243 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 43 components and 0.0867243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104908Jy sigma=0.000651 ! Fit after self-cal, rms=0.104902Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.78436e-05 Jy ! Component: 100 - total flux cleaned = -8.34556e-05 Jy ! Component: 150 - total flux cleaned = -8.10481e-05 Jy ! Component: 200 - total flux cleaned = -7.81092e-05 Jy ! Total flux subtracted in 200 components = -7.81092e-05 Jy ! Clean residual min=-0.003695 max=0.003492 Jy/beam ! Clean residual mean=-0.000033 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.0866462 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.0866462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104913Jy sigma=0.000651 ! Fit after self-cal, rms=0.104904Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=7.47 mas, bpa=-2.339 degrees ! Estimated noise=1046.18 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.76 x 7.47 at -2.339 degrees (North through East) ! Clean map min=-0.00315 max=0.072658 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.362 mas, bmaj=6.645 mas, bpa=-1.063 degrees ! Estimated noise=1489.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0599617 Jy ! Component: 100 - total flux cleaned = 0.0748738 Jy ! Component: 150 - total flux cleaned = 0.0807333 Jy ! Component: 200 - total flux cleaned = 0.0826816 Jy ! Total flux subtracted in 200 components = 0.0826816 Jy ! Clean residual min=-0.004049 max=0.003499 Jy/beam ! Clean residual mean=-0.000012 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.0826816 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0826816 Jy ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=7.47 mas, bpa=-2.339 degrees ! Estimated noise=1046.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355608 Jy ! Component: 100 - total flux cleaned = 0.00441484 Jy ! Component: 150 - total flux cleaned = 0.00471769 Jy ! Component: 200 - total flux cleaned = 0.00497721 Jy ! Total flux subtracted in 200 components = 0.00497721 Jy ! Clean residual min=-0.003346 max=0.002513 Jy/beam ! Clean residual mean=-0.000012 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.0876588 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 39 components and 0.0876588 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.222 mas, bmaj=18.56 mas, bpa=-0.1569 degrees ! Estimated noise=1383.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000945687 Jy ! Component: 100 - total flux cleaned = 0.00100888 Jy ! Component: 150 - total flux cleaned = 0.00106555 Jy ! Component: 200 - total flux cleaned = 0.00114029 Jy ! Total flux subtracted in 200 components = 0.00114029 Jy ! Clean residual min=-0.003368 max=0.003474 Jy/beam ! Clean residual mean=-0.000021 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.0887991 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.38102e-05 Jy ! Component: 100 - total flux cleaned = 8.37163e-05 Jy ! Component: 150 - total flux cleaned = 0.000101615 Jy ! Component: 200 - total flux cleaned = 0.000118355 Jy ! Total flux subtracted in 200 components = 0.000118355 Jy ! Clean residual min=-0.003317 max=0.003459 Jy/beam ! Clean residual mean=-0.000021 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.0889174 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 59 components and 0.0889175 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=7.47 mas, bpa=-2.339 degrees ! Estimated noise=1046.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.598e-05 Jy ! Component: 100 - total flux cleaned = 1.89385e-05 Jy ! Component: 150 - total flux cleaned = 1.86105e-05 Jy ! Component: 200 - total flux cleaned = -5.94503e-06 Jy ! Total flux subtracted in 200 components = -5.94503e-06 Jy ! Clean residual min=-0.003282 max=0.002536 Jy/beam ! Clean residual mean=-0.000008 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.0889115 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 0.0889115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104855Jy sigma=0.000651 ! Fit after self-cal, rms=0.104833Jy sigma=0.000650 wmodel J1454-2505_S_2017_08_12_pus_map.mod ! Writing 76 model components to file: J1454-2505_S_2017_08_12_pus_map.mod wobs J1454-2505_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1454-2505_S_2017_08_12_pus_uvs.fits wwins J1454-2505_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J1454-2505_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130452 Jy ! Component: 100 - total flux cleaned = -0.0019434 Jy ! Component: 150 - total flux cleaned = -0.00248292 Jy ! Component: 200 - total flux cleaned = -0.00256577 Jy ! Component: 250 - total flux cleaned = -0.00260689 Jy ! Component: 300 - total flux cleaned = -0.00272365 Jy ! Component: 350 - total flux cleaned = -0.00272368 Jy ! Component: 400 - total flux cleaned = -0.00276037 Jy ! Component: 450 - total flux cleaned = -0.00276153 Jy ! Component: 500 - total flux cleaned = -0.00286404 Jy ! Component: 550 - total flux cleaned = -0.00286327 Jy ! Component: 600 - total flux cleaned = -0.00283076 Jy ! Component: 650 - total flux cleaned = -0.00279875 Jy ! Component: 700 - total flux cleaned = -0.00270578 Jy ! Component: 750 - total flux cleaned = -0.00270562 Jy ! Component: 800 - total flux cleaned = -0.00261661 Jy ! Component: 850 - total flux cleaned = -0.00250075 Jy ! Component: 900 - total flux cleaned = -0.00244416 Jy ! Component: 950 - total flux cleaned = -0.00233257 Jy ! Component: 1000 - total flux cleaned = -0.00227825 Jy ! Component: 1050 - total flux cleaned = -0.00222541 Jy ! Component: 1100 - total flux cleaned = -0.00222534 Jy ! Component: 1150 - total flux cleaned = -0.00212218 Jy ! Component: 1200 - total flux cleaned = -0.002047 Jy ! Component: 1250 - total flux cleaned = -0.00197315 Jy ! Component: 1300 - total flux cleaned = -0.00202163 Jy ! Component: 1350 - total flux cleaned = -0.00194981 Jy ! Component: 1400 - total flux cleaned = -0.001903 Jy ! Component: 1450 - total flux cleaned = -0.00185709 Jy ! Component: 1500 - total flux cleaned = -0.00183457 Jy ! Component: 1550 - total flux cleaned = -0.00183553 Jy ! Component: 1600 - total flux cleaned = -0.00188003 Jy ! Component: 1650 - total flux cleaned = -0.0018806 Jy ! Component: 1700 - total flux cleaned = -0.00196638 Jy ! Component: 1750 - total flux cleaned = -0.00202863 Jy ! Component: 1800 - total flux cleaned = -0.00200717 Jy ! Component: 1850 - total flux cleaned = -0.00200725 Jy ! Component: 1900 - total flux cleaned = -0.00202714 Jy ! Component: 1950 - total flux cleaned = -0.00206673 Jy ! Component: 2000 - total flux cleaned = -0.00202723 Jy ! Component: 2050 - total flux cleaned = -0.00202742 Jy ! Component: 2100 - total flux cleaned = -0.0019703 Jy ! Component: 2150 - total flux cleaned = -0.00197072 Jy ! Component: 2200 - total flux cleaned = -0.00197133 Jy ! Component: 2250 - total flux cleaned = -0.00202631 Jy ! Component: 2300 - total flux cleaned = -0.00200839 Jy ! Component: 2350 - total flux cleaned = -0.00208007 Jy ! Component: 2400 - total flux cleaned = -0.00213275 Jy ! Component: 2450 - total flux cleaned = -0.00211538 Jy ! Component: 2500 - total flux cleaned = -0.00216715 Jy ! Component: 2550 - total flux cleaned = -0.0022694 Jy ! Component: 2600 - total flux cleaned = -0.00225218 Jy ! Component: 2650 - total flux cleaned = -0.00223561 Jy ! Component: 2700 - total flux cleaned = -0.00231821 Jy ! Component: 2750 - total flux cleaned = -0.0023181 Jy ! Component: 2800 - total flux cleaned = -0.00231794 Jy ! Component: 2850 - total flux cleaned = -0.002334 Jy ! Component: 2900 - total flux cleaned = -0.00236581 Jy ! Component: 2950 - total flux cleaned = -0.00238152 Jy ! Component: 3000 - total flux cleaned = -0.00239706 Jy ! Component: 3050 - total flux cleaned = -0.00235072 Jy ! Component: 3100 - total flux cleaned = -0.00230468 Jy ! Component: 3150 - total flux cleaned = -0.00235038 Jy ! Component: 3200 - total flux cleaned = -0.00231999 Jy ! Component: 3250 - total flux cleaned = -0.00230501 Jy ! Component: 3300 - total flux cleaned = -0.00232003 Jy ! Component: 3350 - total flux cleaned = -0.00236433 Jy ! Component: 3400 - total flux cleaned = -0.0023203 Jy ! Component: 3450 - total flux cleaned = -0.00229134 Jy ! Component: 3500 - total flux cleaned = -0.00230601 Jy ! Component: 3550 - total flux cleaned = -0.00229151 Jy ! Component: 3600 - total flux cleaned = -0.0022916 Jy ! Component: 3650 - total flux cleaned = -0.00230582 Jy ! Component: 3700 - total flux cleaned = -0.00229171 Jy ! Component: 3750 - total flux cleaned = -0.00230581 Jy ! Component: 3800 - total flux cleaned = -0.00230582 Jy ! Component: 3850 - total flux cleaned = -0.00233353 Jy ! Component: 3900 - total flux cleaned = -0.00230598 Jy ! Component: 3950 - total flux cleaned = -0.00229228 Jy ! Component: 4000 - total flux cleaned = -0.00223793 Jy ! Component: 4050 - total flux cleaned = -0.00225147 Jy ! Total flux subtracted in 4096 components = -0.00226491 Jy ! Clean residual min=-0.000859 max=0.000845 Jy/beam ! Clean residual mean=0.000006 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.0866466 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 368 components and 0.0866466 Jy ![Exited script file: muppet] wmap "J1454-2505_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.76 x 7.47 at -2.339 degrees (North through East) ! Clean map min=-0.0019651 max=0.073799 Jy/beam ! Writing clean map to FITS file: J1454-2505_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0737985 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000226749 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.921761 0.921761 1.84352 3.68705 7.37409 14.7482 29.4964 58.9927 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.76 x 7.47 at -2.339 degrees (North through East) ! Clean map min=-0.0019651 max=0.073799 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1454-2505_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:01:52 2019